aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2007-06-25USB: ftdio_sio: New IPlus device IDLuiz Fernando N. Capitulino
Reported by Grzegorz Chimosz <gchimi@gmail.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: add new device id to option driverAlexander Gattin
Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: fix race leading to use after free in io_edgeportOliver Neukum
usb_unlink_urb() is asynchronous, therefore an URB's buffer may not be freed without waiting for the completion handler. This patch switches to usb_kill_urb(), which is synchronous. Thanks to Alan for making me look at the remaining users of usb_unlink_urb() Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: usblcd doesn't limit memory consumption during writeOliver Neukum
usblcd currently has no way to limit memory consumption by fast writers. This is a security problem, as it allows users with write access to this device to drive the system into oom despite resource limits. Here's the fix taken from the modern skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: memory leak in iowarrior.cOliver Neukum
this is a classical memory leak in the ioctl handler. The buffer is simply never freed. This fixes it the obvious way. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: ti serial driver sleeps with spinlock heldOliver Neukum
you are submitting an URB with GFP_KERNEL holding a spinlock. In this case the spinlock can be dropped earlier. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: g_file_storage: call allow_signal()Oleg Nesterov
New changes in the signal-handling code require compensating changes in g_file_storage. This patch (as913) by Oleg Nesterov makes the code use allow_signal() instead of sigprocmask(). From: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08OHCI: Fix machine check in ohci_hub_status_dataAlan Stern
This patch (as901) fixes an oversight in ohci-hcd. The hub_status_data routine must not try to access the controller's memory-mapped registers if the controller is in a low-power state; such attempts will cause a crash on some architectures (such as PPC). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: Fix up bogus bInterval values in endpoint descriptorsAlan Stern
This patch (as904) adds code to check for endpoint descriptor bInterval values outside the legal limits. Illegal values are set to 32 ms, which seems like a reasonable default. This fixes Bugzilla #8432. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: ignore error trying to start ADSL in atm_startSimon Arlott
The sysfs adsl_status attribute ignores (aside from returning -EIO to the user) any error sending a START/STOP command to the device and there is at least one firmware which never sends a response but appears to work regardless. Therefore atm_start should also continue if an error is received so that such firmware is usable. The official Conexant driver doesn't expect a reply either but this is for another device (E2 router) and a commonly used firmware does respond. Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing ever checks for either of these values. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: create sysfs attributes in atm_start instead of bindSimon Arlott
Since usbatm doesn't set the usb_interface driver data until after calling bind and heavy_init, it would be NULL when the sysfs attributes are read. Reading the MAC address from atm_dev before atm_dev exists would have been be possible too. Calling create_device_file in atm_start will avoid this problem, and the data is useless until the first status poll runs. However, it must be ready before a status poll does a printk on line status change otherwise userspace could react before the files exist. For completeness I've moved remove_device_file to atm_stop so it's not called in unbind when it's not needed. There's no point starting ADSL if atm_start could still fail either. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: UNUSUAL_DEV: Sync up some reported devices from UbuntuBen Collins
UNUSUAL_DEV: Sync up some reported devices from Ubuntu Various unusual dev entries accumulated from Ubuntu bug reports. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2007-06-08USB: usb gadgets avoid le{16,32}_to_cpup()David Brownell
It turns out that le16_to_cpup() and le32_to_cpup() aren't always safe to call with pointers into packed structures, since those are inlined functions and GCC may lose the "packed" attribute. So those references can become unaligned kernel accesses, which are evil on some hardware. This patch updates uses of those routines in the gadget stack. The references into packed structures can just use leXX_to_cpu(*x), which in most cases is more natural. Some other uses in RNDIS, mostly in debug code, were wrong in the first place; those use get_unaligned(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08usblp: Don't let suspend to kill ->usedPete Zaitcev
Suspend destroys refcounting for open/release. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: set default y for CONFIG_USB_DEVICE_CLASSKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: bert hubert <bert.hubert@netherlabs.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-29USB: replace flush_workqueue with cancel_sync_workAlan Stern
This patch (as912) replaces a couple of calls to flush_workqueue() with cancel_sync_work() and cancel_rearming_delayed_work(). Using a more directed approach allows us to avoid some nasty deadlocks. The prime example occurs when a first-level device (the parent is a root hub) is removed while at the same time the root hub gets a remote wakeup request. khubd would try to flush the autosuspend workqueue while holding the root-hub's lock, and the remote-wakeup workqueue routine would be waiting to lock the root hub. The patch also reorganizes the power management portion of usb_disconnect(), separating it out into its own routine. The autosuspend workqueue entry is cancelled immediately instead of waiting for the device's release routine. In addition, synchronization with the autosuspend thread is carried out even for root hubs (an oversight in the original code). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Cc: Mark Lord <lkml@rtr.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23ehci-fsl: fix cache coherency problem on system with large memoryLi Yang
The patch fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=7482. It sets USB snooping on 4G space for PowerPC platforms without CONFIG_NOT_COHERENT_CACHE defined. Reported-by: Stefan Meyer <reyems@telkomsa.net> Signed-off-by: Li Yang <leoli@freescale.com> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-22USB: Add support for Olimex arm-usb-ocd JTAG interface serial portTony Lindgren
This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Add support for Sierra Wireless Aircard 595UDanny Budik
This patch adds support for the newly released Aircard 595U EVDO modem to the Sierra Wireless driver (sierra.c) in kernel 2.6.21. I suspect that my mailer may be mangling patches so let me know and I'll try to resend it. From: Danny Budik <dbudik@ist-traffic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: ldusb bugfixOliver Neukum
This patch fixes a problem reported with consecutive reads in the ldusb driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: ftdi_sio: Add USB Product Id for OpenDCCGuido Scholz
USB product id registration for the OpenDCC (www.opendcc.de) model railway central unit. Applies to 2.6.21.1. Signed-off-by: Guido Scholz <guido.scholz@bayernline.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix ratelimit call semanticsAlan Stern
This patch (as910) fixes a ratelimit modification so that the original error-handling path will be followed even when the log-rate limitation kicks in. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: handle errors in power/level attributeAlan Stern
This patch (as906) improves the error handling for the USB power/level attribute file. If an error occurs, the original power-level settings will be restored. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: make the autosuspend workqueue thread freezableAlan Stern
This patch (as881b) makes the ksuspend_usb_wq workqueue freezable. We don't want a rogue workqueue thread running around, unexpectedly suspending or resuming USB devices in the middle of a system sleep transition. This fixes Bugzilla #8498. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Fix USB OHCI Subvendor for Toshiba Portege 4000Andrey Borzenkov
This fixes a bug in an OHCI quirk handler for Portege 4000; the Subvendor is 0x1179 (PCI_VENDOR_ID_TOSHIBA) not 0x102f (PCI_VENDOR_ID_TOSHIBA_2) bugid 8510 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:0004] Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at f7eff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: usblp: Use correct DMA address in case of probe errorPete Zaitcev
Looks like the error path had a copy-paste error. The normal exit path uses correct URB already. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Fix debug output of ark3116Jan Engelhardt
Fix debug output. Previously, it would output "0xFFFFFFB0" on 32-bit archs (and probably "0xFFFFFFFFFFFFFFB0" on 64-bits), because buf is taken as signed char, which is promoted to signed int, while %x always expects an unsigned int. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Onetouch - switch to using input_dev->dev.parentDmitry Torokhov
In preparation for struct class_device -> struct device input core conversion, switch to using input_dev->dev.parent when specifying device position in sysfs tree. Also, do not access input_dev->private directly, use helpers. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: don't try to kzalloc 0 bytesAlan Stern
This patch (as907) prevents us from trying to allocate 0 bytes when an interface has no endpoint descriptors. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: remove short initial timeout for device descriptor fetchAlan Stern
This patch (as905) removes a micro-optimization from the hub port initialization code. Previously we had been using a short timeout on the first attempt the read the device descriptor; now we will use the standard timeout length. It's not clear that the short timeout ever provided any benefit. And now we know of one case where it actually hurts: The device can't meet the short timeout and then it gets terminally confused. This fixes Bugzilla #8444. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Deref URB after usbmon is done with itPete Zaitcev
I haven't personally run across an oops because of this, but I feel safer with this fix in place. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Remove duplicate IDs from option card driverBen Collins
Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: auerswald: fix file release handlerAndrew Morton
If this down_interruptible() does fail due to signal_pending() then the state of the driver will get trashed in interesting ways, because userspace cannot and will not retry the close(). Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fsl_usb2_udc: Fix UMTI_WIDE support and a compile warningLi Yang
Change PORT_WIDTH bit for UMTI_WIDE mode and fix a compile warning introduced in last revision. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: set the correct Interrupt interval in usb_bulk_msgAlan Stern
This patch (as902) fixes a mistake I introduced into usb_bulk_msg(). usb_fill_int_urb() already does the bit-shifting calculation for high-speed Interrupt intervals; it shouldn't be done twice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
2007-05-22USB: New device PID for ftdi_sio driverNeil \"Superna\" ARMSTRONG
Hello, I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for usb2serial communication, here are the patches for handling Maxstream's modules. The VID & PID to use with the open-source driver are provided on the CD-ROM bundled with the modules. From: Neil Superna ARMSTRONG <superna@na-prod.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: remove unneeded WARN_ONAlan Stern
This patch (as883) removes an out-of-date WARN_ON from the main HCD endpoint-disable routine. The warning is triggered whenever an endpoint is disabled while the root hub is suspended. In the past that may not have been legal, but it definitely is legal now. Merely unbinding a USB driver will do it. Furthermore, I've never seen any occurrences of this warning that really did signal an actual bug or error condition. At this point it has outlived its purpose. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2007-05-22USB: more autosuspend timer stuffAlan Stern
This patch (as879) ties up some loose ends from an earlier patch. These are things I didn't think to include at the time but which clearly belonged there. If an autosuspend fails because driver activity races with the autosuspend call, restart the autosuspend timer. When a device is resumed by an external request, it counts as device activity and should update the last_busy time so that the next autoresume won't occur immediately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22EHCI: fix problem with BIOS handoffAlan Stern
This patch (as882) fixes a problem with the EHCI BIOS handoff. On my machine, the BIOS configures the controller and the handoff fails, leaving the controller configured. During resume-from-disk, this confuses ehci-hcd into thinking that the controller has not been tampered with. The problem is fixed by turning off the Configured Flag whenever a BIOS handoff is attempted, whether it succeeds or not. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix more ftdi-elan/u132-hcd #include lossageDavid Brownell
Partial fix for bogosity in the ftdi-elan and u132-hcd drivers ... these have no business including with the internals of other drivers, much less doing so in a broken way!! A previous patch resolved one build fix, this resolves another... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22usb-storage: ignore Sitecom WL-117 USB-WLANMatthew Davidson
The Sitecom WL-117 is another "driverless" ZD1211 device where the virtual windows driver CD must be ejected before the WLAN device appears. zd1211rw takes care of the ejecting, but usb-storage must be told not to claim the device. From: Matthew Davidson <mj.davidson@gmail.com> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: remove useless check in mos7840 found by coverityOliver Neukum
this useless check should be removed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix omninet memory leak found by coverityOliver Neukum
the transfer of allocating the descriptor in attach and no longer in open was incomplete resulting in a memory leak coverity spotted. This fix is against the patch set you posted. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-11[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.Andrew Victor
Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-10[S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-09Move USB network drivers to drivers/net/usb.Jeff Garzik
It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) sound: convert "sound" subdirectory to UTF-8 MAINTAINERS: Add cxacru website/mailing list include files: convert "include" subdirectory to UTF-8 general: convert "kernel" subdirectory to UTF-8 documentation: convert the Documentation directory to UTF-8 Convert the toplevel files CREDITS and MAINTAINERS to UTF-8. remove broken URLs from net drivers' output Magic number prefix consistency change to Documentation/magic-number.txt trivial: s/i_sem /i_mutex/ fix file specification in comments drivers/base/platform.c: fix small typo in doc misc doc and kconfig typos Remove obsolete fat_cvf help text Fix occurrences of "the the " Fix minor typoes in kernel/module.c Kconfig: Remove reference to external mqueue library Kconfig: A couple of grammatical fixes in arch/i386/Kconfig Correct comments in genrtc.c to refer to correct /proc file. Fix more "deprecated" spellos. Fix "deprecated" typoes. ... Fix trivial comment conflict in kernel/relay.c.
2007-05-09usbatm_heavy_init: don't use CLONE_SIGHANDOleg Nesterov
usbatm_do_heavy_init() calls allow_signal() which plays with parent process's ->sighand. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Duncan Sands <duncan.sands@free.fr> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09Fix misspellings collected by members of KJ list.Robert P. J. Day
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>