aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/Makefile
AgeCommit message (Collapse)Author
2009-12-16fbdev: bfin-lq035q1-fb: new Blackfin Landscape LCD EZ-Extender driverMichael Hennerich
Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT) http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extender Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-09OMAP: Add VRAM managerTomi Valkeinen
Add a Video RAM manager for OMAP 2 and 3 platforms. VRAM manager is used to allocate large continuous blocks of SDRAM or SRAM. The features VRAM manager has that are missing from dma_alloc_* functions are: - Support for OMAP2's SRAM - Allocate without ioremapping - Allocate at defined physical addresses - Allows larger VRAM area and larger allocations The upcoming DSS2 uses VRAM manager. VRAM area size can be defined in kernel config, board file or with kernel boot parameters. Board file definition overrides kernel config, and boot parameter overrides kernel config and board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-09-23ep93xx video driverRyan Mallon
EP93xx video driver plus documentation. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xxSudhakar Rajashekhara
Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> DESC davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix EDESC From: Andrew Morton <akpm@linux-foundation.org> fix kconfig indenting Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Cc: Steve Chen <schen@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23fbdev: framebuffer support for HTC DreamPavel Machek
Add a framebuffer driver for Qualcomm MSM/QSD SoCs, tested on HTC Dream smartphone (aka T-Mobile G1, aka ADP1). Brian said: I did the original quick and dirty version for bringup. Rebecca took over and (re)wrote the bulk of the driver, getting things stable for production ship of Dream and Sapphire, and Dima is currently adding support for later Qualcomm chipsets (QSD8x50, etc). Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Rebecca Schultz Zavin <rebecca@android.com> Cc: Dima Zavin <dima@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-13fb: add support of LCD display controller on pxa168/910 (base layer)Lennert Buytenhek
This driver is originally written by Lennert, modified by Green to be feature complete, and ported by Jun Nie and Kevin Liu for pxa168/910 processors. The patch adds support for the on-chip LCD display controller, it currently supports the base (graphics) layer only. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Green Wan <gwan@marvell.com> Cc: Peter Liao <pliao@marvell.com> Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-05-06fbdev: remove makefile reference to removed driverKrzysztof Helt
The cyblafb driver is removed so remove its last trace in the makefile. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01fb: add s3c-fb driver for newer Samsung SoC framebuffer devicesBen Dooks
Add support for the newer Samsung devices, such as found in the S3C2443, S3C6400 or S3C6410 series SoC. It currently does not support all the alpha- or chroma-key options but it will support more exporting more than one framebuffer ready for adding overlay and blending functions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01n411: add missing Makefile entryHerton Ronaldo Krzesinski
There is no entry for n411.c to be built, include one in Makefile. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-16Merge branch 'imx-fb-fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into devel Conflicts: drivers/video/mx3fb.c
2009-02-26i.MX31: framebuffer driverGuennadi Liakhovetski
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous displays, vertical panning supported, no overlay support. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-26Revert "i.MX31: framebuffer driver"Dan Williams
This reverts commit 86528da229a448577a8401a17c295883640d336c. This version of the patch was tab-to-space corrupted before application. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-10[ARM] 5353/1: fbdev: add E-Ink Broadsheet controller support v3Jaya Kumar
This patch adds support for the E-Ink Broadsheet display controller. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-26Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: i.MX31: framebuffer driver i.MX31: Image Processing Unit DMA and IRQ drivers dmaengine: add async_tx_clear_ack() macro dmaengine: dma_issue_pending_all == nop when CONFIG_DMA_ENGINE=n dmaengine: kill some dubious WARN_ONCEs fsldma: print correct IRQ on mpc83xx fsldma: check for NO_IRQ in fsl_dma_chan_remove() dmatest: Use custom map/unmap for destination buffer fsldma: use a valid 'device' for dma_pool_create dmaengine: fix dependency chaining
2009-01-21i.MX31: framebuffer driverGuennadi Liakhovetski
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous displays, vertical panning supported, no overlay support. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-12fbdev: c2p - Rename c2p to c2p_planarGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p/atafb - Add support for Atari interleaved bitplanesGeert Uytterhoeven
The c2p() for normal bitplanes is not suitable for interleaved bitplanes with 2 bytes of interleave, causing a garbled penguin logo. Add c2p_iplan2(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-11-06fbdev: add new framebuffer driver for Fujitsu MB862xx GDCsAnatolij Gustschin
Add a framebuffer driver for the Fujitsu Carmine/Coral-P(A)/Lime graphics controllers. Lime GDC support is known to work on PPC440EPx based lwmon5 and MPC8544E based socrates embedded boards, both equipped with Lime GDC. Carmine/Coral-P PCI GDC support is known to work on PPC440EPx based Sequoia board and also on x86 platform. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matteo Fortini <m.fortini@selcomgroup.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbdev: add new TMIO framebuffer driverDmitry Baryshkov
Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB chips. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16efifb/imacfb consolidation + hardware supportPeter Jones
Remove imacfb entirely, merging its DMI table into the (otherwise very similar) efifb driver. This also adds hardware support for many of the newer Intel Apple hardware. This has been fairly well tested; we've been shipping it in Fedora for some time. Signed-off-by: Peter Jones <pjones@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16viafb: Makefile, KconfigJoseph Chan
Modified drivers/video/Makefile and drivers/video/Kconfig. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-26[ARM] 5200/1: am200epd: use fb notifiers and gpio apiJaya Kumar
The original am200epd driver was designed with bad assumptions. It manipulated GPSR/GPLR registers directly. It relied on direct access to the pxa LCDC registers which have since conflicted with commit ce4fb7b892a6d6c6a0f87366b26fd834d2923dd7 . This patch moves it into mach-pxa and overhauls it to use a fb obtained through fb notifiers. It now uses the generic GPIO api. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-29video: Kill off leaked CONFIG_FB_SH7343VOU reference.Paul Mundt
This came in with the SH-Mobile LCDC changes in commit cfb4f5d1750e05f43902197713c50c29e7dfbc99, kill it off. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-24video: sh7760fb: SH7760/SH7763 LCDC framebuffer driverNobuhiro Iwamatsu
Framebuffer driver for the SH7760/SH7763 integrated LCD controller. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24fbdev: add new Cobalt LCD framebuffer driverYoichi Yuasa
Add new Cobalt LCD framebuffer driver. [akpm@linux-foundation.org: fix build] Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24fbdev: SuperH Mobile LCDC DriverMagnus Damm
This is the SuperH Mobile LCDC frame buffer driver V2, adding support for the LCDC block found in SuperH Mobile processors. The hardware supports up to two LCD panels per LCDC block, and both RGB and SYS interfaces can be used to hook up LCD panels/modules. The device driver is a regular platform driver, so LCD configuration and board specific hooks are passed to the driver using platform data. LCD modules using SYS interface often require special configuration using the SYS bus, and to solve this cleanly the driver provides SYS interface operations to the board code. Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA panels using RGB16 and RGB18 interfaces. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24fbdev: add the carmine FB driverSebastian Siewior
Basic FB driver for the carmine chip. The driver registers two FB devices for the two possible screens. The DRAM settings can be be switched via Kconfig (between eval board and custom). Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fbdev: platforming metronomefb and am200epdJaya Kumar
This patch splits metronomefb into the platform independent metronomefb and the platform dependent am200epd. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fbdev: powerpc: driver for Freescale 8610 and 5121 DIUYork Sun
The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24xen pvfb: Para-virtual framebuffer, keyboard and pointer driverMarkus Armbruster
This is a pair of Xen para-virtual frontend device drivers: drivers/video/xen-fbfront.c provides a framebuffer, and drivers/input/xen-kbdfront provides keyboard and mouse. The backends run in dom0 user space. The two drivers are not in two separate patches, because the intermediate step (one driver, not the other) is somewhat problematic: the backend in dom0 needs both drivers, and will refuse to complete device initialization unless they're both present. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-19fbdev: defio and MetronomefbJaya Kumar
Implement support for the E-Ink Metronome controller. It provides an mmapable interface to the controller using defio support. It was tested with a gumstix pxa255 with Vizplex media using Xfbdev and various X clients such as xeyes, xpdf, xloadimage. This patch also fixes the following bug: Defio would cause a hang on write access to the framebuffer as the page fault would be called ad-infinitum. It fixes fb_defio by setting the mapping to be used by page_mkclean. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10fbdev: add BF52x EZkit Display driverMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29x86_64 EFI boot support: EFI frame buffer driverHuang, Ying
This patch adds Graphics Output Protocol support to the kernel. UEFI2.0 spec deprecates Universal Graphics Adapter (UGA) protocol and only Graphics Output Protocol (GOP) is produced. Therefore, the boot loader needs to query the UEFI firmware with appropriate Output Protocol and pass the video information to the kernel. As a result of GOP protocol, an EFI framebuffer driver is needed for displaying console messages. The patch adds a EFI framebuffer driver. The EFI frame buffer driver in this patch is based on the Intel Mac framebuffer driver. The ELILO bootloader takes care of passing the video information as appropriate for EFI firmware. The framebuffer driver has been tested in i386 kernel and x86_64 kernel on EFI platform. Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16bf54x-lq043fb: framebuffer driver for Blackfin BF54x framebuffer device driverMichael Hennerich
Blackfin BF54x framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD [adaplas] Add 'fb' suffix to driver name. Move Makefile entry under platform device section Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16uvesafb: the driver coreMichal Januszewski
uvesafb is an enhanced version of vesafb. It uses a userspace helper (v86d) to execute calls to the x86 Video BIOS functions. The driver is not limited to any specific arch and whether it works on a given arch or not depends on that arch being supported by the userspace daemon. It has been tested on x86_32 and x86_64. A single BIOS call is represented by an instance of the uvesafb_ktask structure. This structure contains a buffer, a completion struct and a uvesafb_task substructure, containing the values of the x86 registers, a flags field and a field indicating the length of the buffer. Whenever a BIOS call is made in the driver, uvesafb_exec() builds a message using the uvesafb_task substructure and the contents of the buffer. This message is then assigned a random ack number and sent to the userspace daemon using the connector interface. The message's sequence number is used as an index for the uvfb_tasks array, which provides a mapping from the messages coming from userspace to the in-kernel uvesafb_ktask structs. The userspace daemon performs the requested operation and sends a reply in the form of a uvesafb_task struct and, optionally, a buffer. The seq and ack numbers in the reply should be exactly the same as those in the request. Each message from userspace is processed by uvesafb_cn_callback() and after passing a few sanity checks leads to the completion of a BIOS call request. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Paulo Marques <pmarques@grupopie.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31remove tx3912fbYoichi Yuasa
Remove tx3912fb. Nino has already removed. It is no longer needed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22Pull video into release branchLen Brown
2007-07-17OMAP: add TI OMAP framebuffer driverImre Deak
- Add Texas Instruments OMAP framebuffer driver. This driver is being used for various OMAP1/2 series based boards and products e.g Nokia N800 Internet Tablet, H4, H3, Siemens SX1 etc. - LCD panel registration and controller code is separated in different file and interfaces. Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driverNicolas Ferre
Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms. Those chips share quite the same IP and this code is suitable for both architectures. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09ACPI: video: output switch sysfs supportLuming Yu
Requires CONFIG_VIDEO_OUTPUT_CONTROL and CONFIG_ACPI_VIDEO. After loading output.ko and video.ko, you would have /sys/class/video_output and several device acpi_videoNum there. For example, I got acpi_video0, acpi_video1,acpi_video2,and acpi_video3 under /sys/class/video_output on my T40. I can query the status of output device0 by running " cat /sys/class/video_output/acpi_video0 " The return value is defined in ACPI SPEC B.5.5 _DCS(Return the Status of Output Device). Also you can turn off video1 and turn on video0 by " echo 0 > acpi_video1; echo 0x80000000 > acpi_video0". Please reference ACPI SPEC B.5.7 _DSS for the parameter definition. Please note that it may or may NOT works purely depending on if your vendor providing correct ACPI video extension support in bios. the driver output.ko and video.ko just works like a interface to invoke BIOS. Signed-off-by: Luming Yu <Luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09arkfb: new framebuffer driver for ARK Logic cardsOndrej Zajicek
This patch adds fbdev driver for graphics cards with ARK Logic 2000PV graphics chip with ICS 5342 ramdac. [adaplas@gmail.com: build fixes] Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09vt8623fb: new framebuffer driver for VIA VT8623Ondrej Zajicek
This patch adds fbdev driver for graphics core in VIA VT8623 [adaplas@gmail.com: build fixes] Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08xilinxfb: xilinx framebuffer device driverAndrei Konovalov
Add support for the video controller IP block included into Xilinx ML300 and ML403 reference designs. Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vmlfb: framebuffer driver for Intel Vermilion RangeAlan Hourihane
Add the Intel Vermilion Range framebuffer support. Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add fb_read/fb_write functions for framebuffers in system RAMAntonino A. Daplas
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using __raw_read/__raw_write (fb_readl/fb_writel) for these drivers is illegal, especially in other platforms. Create file read and write methods for these types of drivers. These are named fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add drawing functions for framebuffers in system RAMAntonino A. Daplas
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using _raw_read/write and family for these drivers (as used in the cfb* functions) is illegal, especially in other platforms. Create 3 new drawing functions, based almost entirely from the original except that the framebuffer memory is assumed to be in system RAM. These are named as sysimgblt, syscopyarea, and sysfillrect. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: link vgastate.o using KconfigAntonino A. Daplas
Instead of directly linking vgastate.o by individual drivers, create a Kconfig option VGASTATE which can be 'SELECT'ed by individual drivers instead. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08savagefb: VGA state save and restoreAntonino A. Daplas
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the VGA registers are linearly mapped to the MMIO space, MMIO access is used which is not limited to X86 platforms nor to the primary display device. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: VGA state save and restoreAntonino A. Daplas
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the non-linear mapping of the VGA registers to the MMIO space, this will be done only on X86 platforms where the device is the primary display. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: hecuba Framebuffer DriverJaya Kumar
This patch implements support for the E-Ink/hecuba display device. It uses deferred IO support. [akpm@linux-foundation.org: linker section fixes] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>