aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/intelfb
AgeCommit message (Collapse)Author
2006-12-10i2c: Discard the i2c algo del_bus wrappersJean Delvare
They are all only calling i2c_del_adapter, so we may as well do it directly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-08[PATCH] drivers/video/*: use kmemdup()Alexey Dobriyan
From: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-25Remove unnecessary check in drivers/video/intelfb/intelfbhw.cEric Sesterhenn
All callers and the function itself dereference dinfo, so we can remove the check. (coverity id #1371) Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-10-25intel fb: switch to pci_get APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-09-30Merge branch 'intelfb-patches' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6 * 'intelfb-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6: intelfbhw.c: intelfbhw_get_p1p2 defined but not used intelfb: fix mtrr_reg signedness intelfb: update doc and Kconfig (supported devices) intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support
2006-08-22intelfbhw.c: intelfbhw_get_p1p2 defined but not usedParag Warudkar
intelfbhw_get_p1p2 is used only if REGDUMP is defined - compile it in only if REGDUMP is defined - one less compiler warning. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-08-22intelfb: fix mtrr_reg signednessDave Airlie
This is my fix for gcc 4.1 sign issue reported by Eric Sesterhenn <snakebyte@gmx.de>. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-07-10[PATCH] vt: Remove VT-specific declarations and definitions from tty.hJon Smirl
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
Adds code to unregister the I2C buses in the cleanup function. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
[07/07] intelfb: adds an option to enable I2C support in the intelfb driver. Also adds the intel_i2c.c file to the Makefile. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
[06/07] intelfb: adds intelfb_i2c.c which contains the infrastructure needed to enumerate the i2c busses on the intelfb. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
[05/07] intelfb: add output fields to dinfo. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
[04/07] intelfb: add intelfb_output_rec struct and the constants for it's fields. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
[03/07] intelfb: add intelfb_i2c_chan struct. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add preliminary i2c supportDennis Munsie
[02/07] intelfb: add GPIO registers. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
2006-07-03intelfb: add vsync interrupt supportEric Hustvedt
[05/05] intelfb: Honor FB_ACTIVATE_VBL for display panning Extends the intelfb_vsync struct to store panning offset. The interrupt service routine uses the stored panning offset if a pan is requested for the vsync. intelfbhw_disable_irq also pans the display if there is a pending request. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
2006-07-03intelfb: add vsync interrupt supportEric Hustvedt
[04/05] intelfb: implement FBIO_WAITFORVSYNC ioctl The (unofficial) FBIO_WAITFORVSYNC ioctl is implemented by sleeping on the appropriate waitqueue, as defined in my earlier patch. Currently, only display 0 (aka pipe A) is supported. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
2006-07-03intelfb: add vsync interrupt supportEric Hustvedt
[03/05] intelfb: Implement basic interrupt handling Functions have been added to enable and disable interrupts using the MMIO registers. Currently only pipe A vsync interrupts are enabled. A generalized vsync accounting struct is defined, with the intent that it can encapsulate per-pipe vsync related info in the future. Currently a single instance is hard-coded. The interrupt service routine currently only looks for vsync interrupts on pipe A, and increments a counter and wakes up anyone waiting on it. This implementation is heavily influenced by similar implementations in the atyfb and matroxfb drivers. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
2006-07-03intelfb: add vsync interrupt supportEric Hustvedt
[02/05] intelfb: Add interrupt related register definitions Add constants for accessing HWSTAM, IER, IIR, and IMR registers. Add constants for interrupt types supported by the 8xx and 9xx chipsets. The registers are also stored in the hwstate struct and dumped in the debug routine. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
2006-07-03intelfb: add vsync interrupt supportEric Hustvedt
[01/05] intelfb: Add 16-bit register access macros This patch adds macros to read and write two-byte MMIO registers. The interrupt-related registers are all word-sized, rather than long-sized. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-24intelfb delousingAl Viro
ring_head is offset in card memory, not iomem pointer. Fixed, removed fuckloads of amazingly bogus casts somebody had sprinkled all over the place. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-18intelfb: fixup clock calculation debugging.Dave Airlie
The debugging code for pll clocks was wrong and causing div by 0. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-07Removed hard coded EDID buffer size.Dennis Munsie
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29intelfb: use regular modedb table instead of VESADennis Munsie
intelfb driver -- use the regular modedb table instead of the VESA modedb table. Ideally, the 9xx stride patch should be applied first, since there are modes in the VESA table that won't work without that patch. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29intelfb: use firmware EDID for mode databaseAntonino A. Daplas
Use firmware EDID for the driver's private mode database. Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29Revert "intelfb driver -- use the regular modedb table instead of the VESA"Dave Airlie
This reverts 2c47430a03bbcc3c9a623a07eca5baf92c7d20c8 commit. This conflicts with a patch in -mm from Antonino reapply later. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-29intelfb: int option fixEric Hustvedt
Fix integer option parsing in the intelfb driver. The macro wasn't accounting for the equal sign past the option name. As a result, the vram option always returned 0. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com> Signed-off-by: Dennis Munsie <dmunsie@cecropia.com Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27sync modesetting code with X.orgDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27intelfb: align with changes from my X driver.Dave Airlie
This just realigns the PLL calculation routines with the ones from my X.org driver. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27intelfb driver -- use the regular modedb table instead of the VESADennis Munsie
modedb table. Ideally, the 9xx stride patch should be applied first, since there are modes in the VESA table that won't work without that patch. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27Adds support for 256MB aperture on 945 chipsets to the intelfb driverEric Hustvedt
and corrects calculation of stolen memory overhead. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com> Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-05-27intelfb -- uses stride alignment of 64 on the 9xx chipsets.Dennis Munsie
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: some cleanups for intelfbhwDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: fixup pitch calculation like X doesDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: fixup p calculationDave Airlie
This fixes up the p calculation of p1 and p2 for the i9xx chipsets. This seems to work a lot better for lower pixel clocks.. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03This patch makes a needlessly global struct static.Dave Airlie
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: add i945GM supportDave Airlie
Untested i945GM support just add the framework. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: fixup whitespace..Dave Airlie
repeat after me, I must not take code from X without reformatting... Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: add hw cursor support for i9xxDave Airlie
This adds hw cursor support for the i9xx chipsets. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: make i915 modesetDave Airlie
This takes the modeset and pll code from my X driver. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: add support for i945GDave Airlie
This just adds the defines and structure for i945G Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: add p divisor increments for i9xx.Dave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: change splitm to be brute forceDave Airlie
The old splitm didn't always work use a brute force. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-04-03intelfb: add pll index to the intelfb structureDave Airlie
Add the pll index into the information structure, change get_chipset to take only the info structure, use plls in correct places
2006-04-03intelfb: prepare for i9xx support.Dave Airlie
This code just moves the PLL min/max calculations variables into a structure, it doesn't change or add any new functionality. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-03-11[PATCH] intelfb: Fix buffer overrunAntonino A. Daplas
The pseudo_palette has room only for 16 entries, but intelfb_setcolreg will attempt to write more. Coverity Bug 558 Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] fbdev: Sanitize ->fb_ioctl prototypeChristoph Hellwig
The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>