aboutsummaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-12[POWERPC] XilinxFB: Allow fixed framebuffer base addressGrant Likely
Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Add support for custom screen resolutionGrant Likely
Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] XilinxFB: Use pdata to pass around framebuffer parametersGrant Likely
The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Convert corgi backlight driver into a more generic driver backlight: Add Samsung LTV350QV LCD driver backlight: Fix cr_bllcd allocations and error paths backlight/leds: Make two structs static
2007-10-11backlight: Convert corgi backlight driver into a more generic driverRichard Purdie
Convert the corgi backlight driver to a more generic version so it can be reused by other code rather than being Zaurus/PXA specific. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11backlight: Add Samsung LTV350QV LCD driverHaavard Skinnemoen
This patch adds support for powering on and off the Samsung LTV350QV LCD panel via SPI. The driver responds to framebuffer power management, it powers off the panel on reboot/halt/poweroff. It can also be controlled through sysfs. The panel is powered up when the module is loaded, and off when the module is unloaded. Verified on AVR32 STK1000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11backlight: Fix cr_bllcd allocations and error pathsJesper Juhl
After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c (commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks. At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'. Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it. A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'. This version of the patch also adds missing backlight_device_unregister() / lcd_device_unregister() / pci_dev_put() calls to error paths. Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11backlight/leds: Make two structs staticAdrian Bunk
This patch makes two needlessly global structs static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-10[POWERPC] XilinxFB: sparse fixesGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-09drivers/firmware: const-ify DMI API and internalsJeff Garzik
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-09[POWERPC] XilinxFB: Make missing pdata structure non-fatalGrant Likely
Missing pdata structure is not a fatal error. The device can still be initialized without it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-09[POWERPC] XilinxFB: add of_platform bus bindingGrant Likely
Adds the of_platform bus binding to the xilinxfb driver. Needed to use framebuffer devices described in the OF device tree (used by arch/powerpc). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
2007-10-09[POWERPC] XilinxFB: cleanup platform_bus binding to use platform bus API.Grant Likely
Change the platform bus binding to make use of the established platform_bus API. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
2007-10-09[POWERPC] XilinxFB: Split device setup from bus bindingGrant Likely
Split the device setup code away from the platform bus binding. This is in preparation for adding the of_platform bus binding to this driver and most of the setup code is common between the two busses. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
2007-10-09[POWERPC] XilinxFB: rename failout labels to reflect failureGrant Likely
Labels and gotos are used in xilinxfb_assign to unwind allocations on device registration failures. Rename the labels to reflect the error which occured. This change is being made to make it easier to add new failout paths (which occurs in a subsuquent patch) and to make reviewing the failout path easier. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
2007-10-09[POWERPC] XilinxFB: Replace calls to printk with dev_dbg, dev_err, etc.Grant Likely
The dev_dbg, dev_err, etc functions provide more context that plain vanilla printk which is useful for debugging. Where appropriate, change printk calls to the appropriate dev_*() call. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
2007-10-09[POWERPC] XilinxFB: add banner output to probe routine when DEBUG is definedGrant Likely
Debug support: when DEBUG is defined, output relevant details to the log about the framebuffer registration. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andrei Konovalov <akonovalov@ru.mvista.com>
2007-10-03[POWERPC] XilinxFB: Move xilinxfb_platform_data definition to a shared ↵Grant Likely
header file XilnixFB can be used by more than just arch/ppc. Move the data structure definition into include/linux/xilinxfb.h so it can be used by microblaze and arch/powerpc Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-22[POWERPC] Fix platinumfb framebufferBenjamin Herrenschmidt
Current kernels have a non-working platinumfb due to some resource management issues. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19intelfb: Fix bug in DPLL disableAntonino A. Daplas
Reported in Kernel Bugzilla 9006 Fix an obvious bug in DPLL disable. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-13radeonfb: fix chip definition for Radeon Xpress 200M 0x5975aherrman@arcor.de
This fixes a problem introduced with commit b5f2f4d1a6d7efde39cfb5e1d034981c69f2214c The commit added a wrong chip definition to radeonfb which causes a blank console on my Laptop if radeonfb is loaded. The patch - renames PCI_CHIP_RS485_5975 to PCI_CHIP_RS482_5975 - corrects the chip family (RS480 instead of R300) for 0x5975 - ensures that PCI IDs are in ascending order in ati_ids.h Signed-off-by: Andreas Herrmann <aherrman@arcor.de> Tentatively-acked-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-13radeonfb: fix setting of PPLL_REF_DIV for RV370 5B60.aherrman@arcor.de
As observed with various Radeon X300 cards console goes blank without that fix. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andreas Herrmann <aherrman@arcor.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11Subject: [PATCH] Intel FB pixel clock calculation fixKrzysztof Halasa
Intel framebuffer mis-calculated pixel clocks. The pixel clock (and thus both H and V sync) will be slower than requested, so if you set the minimum allowed the display may not sync. In case of really old CRT display it could theoretically damage it. I'm using it with PAL TV (using RGB input - SCART connector) and the bug prevented it from working at all (TV requirements are more strict and made the bug visible). Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31Fix font dependency for SGI Newport console driverRalf Baechle
We better select a font when the newport driver is a module or the user experience might suffer. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-27Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC32]: Make flush_tlb_kernel_range() an inline function. [SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c [SPARC32]: Kill unused vars and macros from prom/console.c [SPARC32]: Add __cmpdi2() libcall implementation ala. MIPS. [VIDEO]: Do not prom_halt() in cg3 and bw2 device probe. [SUNVDC]: Use slice 0xff on VD_DISK_TYPE_DISK.
2007-08-27Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] Add NOTES section [PARISC] Use compat_sys_getdents [PARISC] Do not allow STI_CONSOLE to be modular [PARISC] Clean up sti_flush [PARISC] Add dummy isa_(bus|virt)_to_(virt|bus) inlines [PARISC] Add empty <asm-parisc/vga.h>
2007-08-27[PARISC] Do not allow STI_CONSOLE to be modularKyle McMartin
It doesn't really make much sense, anyways, and would need a pile of symbols exported. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-08-27[PARISC] Clean up sti_flushKyle McMartin
sti_flush is supposed to flush the caches so we can execute the STI rom we copied to memory. Anything more than flush_icache_range is overkill. Fixes a missing symbol when built as a module. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-08-26[VIDEO]: Do not prom_halt() in cg3 and bw2 device probe.David S. Miller
Just give a normal kernel log message of the problem and return failure. Based upon a patch from Mark Fortescue. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-22au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()Yoichi Yuasa
au1100fb_fb_blank() should come before au1100fb_setmode(). drivers/video/au1100fb.c: In function 'au1100fb_setmode': drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank' Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22newport_con warning fixAndrew Morton
drivers/video/console/newport_con.c: In function `newport_console_init': drivers/video/console/newport_con.c:743: warning: return makes integer from pointer without a cast Although one wonders whether that should have been -ENODEV... Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Check for PPC32 in imsttfbStephen Rothwell
This is the correct fix according to Paul Mackerras and allows an allyesconfig on PPC64 to build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4549/1: KS8695: Fix build errors [ARM] 4546/1: s3c2410: fix architecture typo for s3c2442 [ARM] 4544/1: arm: fix section mismatch in pxa fb
2007-08-11[ARM] 4544/1: arm: fix section mismatch in pxa fbSam Ravnborg
Fix following section mismatch warning: WARNING: drivers/built-in.o(.text+0x73d0): Section mismatch: reference to .init.data: (between 'pxafb_setup' and 'pxafb_init') The warning are caused by __devinit pxafb_setup() that refers to a variable marked __initdata. In a hotplug scenario we would have a reference to the freed .init.data section. Fix this by declaring g_options __devinitdata. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-11matroxfb: rectify jitter (G450/G550)Paul A. Clarke
This builds upon my previous attempts to resolve some jitter problems seen with the Matrox G450 and G550 -based cards, including odd disparities observed between x86 and Power -based machines in a somewhat less hackish way (removing the hacked ifdefs). Apparently, preference should be given to use the DVI PLL when frequencies permit, the Standard PLL otherwise. The max pixel clock for the panellink interface is extracted from the PInS information on the card and used as a limit to determine which PLL to use. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Acked-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11pvr2fb: Consolidated cleanup of pvr2fb.cAdrian McMenamin
- better handling of the pvr2 registers based on more up to date information. Testing shows that it seems to work pretty well at 16bpp, 24bpp and 32bpp - including proper rendering of the boot logo at all levels (previously this was a bit broken even at 16bpp) and giving white against black text. Really detailed testing (eg with X11) requires support for the maple bus - which isn't (currently - next project assuming this is okay) available, but I have no reason to think this is broken. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11pvr2fb: Fix oops when pseudo_palette is writtenAntonino A. Daplas
Reported by: Adrian McMenamin <adrianmcmenamin@gmail.com> This driver will oops when the pseudo_palette[] is written as u32 but not when written as u16. When written as u32, it corrupts the adjacent 'mmio_base' field of struct pvr2fb_par. Fix by using framebuffer_alloc()/release() to allocate struct fb_info and struct pvr2fb_par, and create the pseudo_palette[] as part of struct pvr2fb_par. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11fbcon: Kill compile warningAntonino A. Daplas
Fix compile warning ('map_override unused') if fbcon is compiled as a module and CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=n. [akpm@linux-foundation.org: cleanup] Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11stifb: detect cards in double buffer mode more reliablyHelge Deller
Visualize-EG, Graffiti and A4450A graphics cards on PARISC can be configured in double-buffer and standard mode, but the stifb driver supports standard mode only. This patch detects double-buffered cards more reliable. It is a real bugfix for a very nasty problem for all parisc users which have wrongly configured their graphic card. The problem: The stifb graphics driver will not detect that the card is wrongly configured and then nevertheless just enables the graphics mode, which it shouldn't. In the end, the user will see no further updates / boot messages on the screen. We had documented this problem already on our FAQ (http://parisc-linux.org/faq/index.html#viseg "Why do I get corrupted graphics with my Vis-EG/Graffiti/A4450A card?") but people still run into this problem. So having this fix in as early as possible can help us. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: <stable@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-03[CG6]: fix memory size detectionKrzysztof Helt
This patch fixes memory size detection on the CG6 card. The 1MB TGX card has dblbuf property set to 0. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31remove tx3912fbYoichi Yuasa
Remove tx3912fb. Nino has already removed. It is no longer needed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Remove the arm26 portAdrian Bunk
The arm26 port has been in a state where it was far from even compiling for quite some time. Ian Molton agreed with the removal. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31lxfb: GEODE: Add framebuffer support for the AMD Geode LXJordan Crouse
Add framebuffer support for the AMD Geode LX graphics engine. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31xilinxfb: Don't bail if the xilinxfb platform device doesn't have any pdataGrant Likely
Lack of pdata is not a fatal omission. The driver can still be used even if we do not know the screen dimensions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31xilinxfb:Remove __initdata from xilinx_fb_fix and xilinx_fb_varGrant Likely
xilinxfb_drv_probe refers to both tables, but it cannot be initdata. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31s3c2410fb: fix s3c2410 compilationBen Dooks
The implicit mapping has been removed from the arch as this should be handled in the driver, this patch fixes the s3c2410_fb driver to ioremap() the necessary registers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31fbdev: Fix logo if logo depth is less than framebuffer depthAntonino A. Daplas
The VGA16 logo (bpp = 4) and monochrome logo (bpp = 1) do not contain any color information (no CLUT). If the fb depth is > logo depth, these logo's will not properly display. Fix by using the console palette instead of creating a new one. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31fbcon: Fix typo and bogus logic in get_default_fontAntonino A. Daplas
Reported in: Bugzilla Bug 8727 Fix typo and bogus logic in get_default_font(). The bug results in get_default_font() returning a font that may not be displayed properly by a framebuffer driver. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30[SPARC]: Mark SBUS framebuffer ioctls as IGNORE in compat_ioctl.cDavid S. Miller
They are handled in a ->compat_ioctl() handler, so it's just noise when compat_ioctl.c warns which occurs when they are used on non-SBUS framebuffer devices. Signed-off-by: David S. Miller <davem@davemloft.net>