aboutsummaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2008-02-06atmel_lcdfb: backlight controlDavid Brownell
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06sm501fb: clear framebuffer memory and paletteMagnus Damm
Avoid displaying garbage on unused framebuffers. For most users a single framebuffer is used together with fbcon. sm501fb supports two framebuffers where one often is assigned to fbcon and the other one is left unused during the boot. The problem here is that framebuffers not in use by fbcon happen to display garbage. This can easily be solved by making sure that framebuffer memory and palette ram are cleared. The problem can be observed by using looking at the panel output (fb1) after booting the kernel with fbcon on crt (fb0). This is the default configuration. It's also possible to watch the garbage on the crt framebuffer by passing "fbcon=map:1" on the kernel cmdline. This will assign fbcon to the panel (fb1) and leave the crt (fb0) unused. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06sm501fb: control panel pin usage with platform data flagsMagnus Damm
This patch makes it possible to control panel pins usage with flags passed from the platform data. Without this patch the sm501fb driver always controls the VBIASEN and FPEN pins. The polarity and use of these pins are very platform specific, so this patch introduces the flags SM501FB_FLAG_PANEL_USE_VBIASEN and SM501FB_FLAG_PANEL_USE_FPEN which enable the use of these pins. This patch is needed to support the a Sharp LQ104V1DG21 lcd panel on SuperH platforms such as R2D-1 and R2D-PLUS boards. Letting the sm501fb driver control the FPEN and VBIASEN pins like today just results in lcd panel flicker. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/video: add missing pci_dev_getJulia Lawall
pci_get_device does a pci_dev_get, so pci_dev_put needs to be called in an error case The problem was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @exists@ type T1,T2; identifier E; statement S,S1; expression x1,x2,x3; expression test; int ret != 0; @@ struct pci_dev *E; ... ( E = \(pci_get_slot\|pci_get_device\|pci_get_bus_and_slot\)(...); if (E == NULL) S | if ((E = \(pci_get_slot\|pci_get_device\|pci_get_bus_and_slot\)(...)) == NULL) S ) ... when != pci_dev_put(...,(T1)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any ( if (E == NULL) S1 | if (test) + { ( + pci_dev_put(E); return; | + pci_dev_put(E); return ret; ) + } | if (test) { ... when != pci_dev_put(...,(T2)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T2)E,...); ...} when != x2 = (T2)E ( + pci_dev_put(E); return; | + pci_dev_put(E); return ret; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06uvesafb: small cleanupsRandy Dunlap
Some cleanups in uvesafb: - The custom module_param() get/set functions don't need to be inlined since it is referred to via a pointer in a struct. - don't end a #define with a ';' - remove one of the single quote marks in "''ypan'" Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Michal Januszewski <spock@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06tdfxfb: fix section mismatch warningsRandy Dunlap
tdfxfb_setup() can be __init. This fixes the modpost section mismatch warnings: WARNING: vmlinux.o(.text+0x4cff9b): Section mismatch: reference to .init.data:mode_option (between 'tdfxfb_setup' and 'getclkMHz') WARNING: vmlinux.o(.text+0x4cffa8): Section mismatch: reference to .init.data: (between 'tdfxfb_setup' and 'getclkMHz') [krzysztof.h1@poczta.fm: use __init, not __devinit] Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fb: nvidiafb: Try harder at initial mode setting.Paul Mundt
The current nvidiafb_check_var() simply bails out if the selected mode is out of range of the panel dimensions. A good question would be why the bogus mode is being selected in the first place -- the panel dimensions that are read back are certainly bogus, but alas, I have no idea where to even begin looking at the i2c/EDID/DDC mess: nvidiafb: Device ID: 10de0165 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog not found nvidiafb: EDID found from BUS1 nvidiafb: CRTC 0 is currently programmed for DFP nvidiafb: Using DFP on CRTC 0 nvidiafb: Panel size is 1280 x 1024 nvidiafb: Panel is TMDS nvidiafb: unable to setup MTRR nvidiafb: Flat panel dithering disabled nvidiafb: PCI nVidia NV16 framebuffer (64MB @ 0xC0000000) In my .config I presently have: CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_NVIDIA_I2C=y I've not tried fiddling with these options, as I haven't the vaguest idea what I should be looking at. As a workaround, simply groveling for a new mode based on the probed dimensions seems to work ok. While it would be nice to debug this further and sort out why the panel information is bogus, I think it's still worth retrying the mode based on the panel information at hand as a last-ditch effort, rather than simply bailing out completely. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06vermilion.c: use ALIGN(), not __ALIGN_MASK()Andrew Morton
__ALIGN_MASK() is an internal implementation detail of ALIGN(). Let's not needlessly fatten the interface in this driver. [fujita.tomonori@lab.ntt.co.jp: fix it] Cc: Alan Hourihane <alanh@fairlite.demon.co.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06neofb: avoid overwriting fb_info fieldsAndrew Morton
Fix bug identified by Marcio Buss in http://bugzilla.kernel.org/show_bug.cgi?id=9565 - neofb can overwrite a field in the fb_info struct. This fix will result in truncated device identification strings - perhaps fb_innfo.fix.id can be made larger? Cc: Marcio Buss <marciobuss@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Christian Trefzer <ctrefzer@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/video/pm3fb.c section fixAdrian Bunk
WARNING: vmlinux.o(.text+0x46e456): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e45c): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e49b): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4a0): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4bc): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4c2): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e5c1): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e5c7): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbcon: fix sparse warning about shadowing 'rotate' symbolMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbcon: fix sparse warning about shadowing 'p' symbolMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06vgacon: fix sparse warning about shadowing 'i' symbolMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06atmel_lcdfb: validate display timingsHaavard Skinnemoen
Setting a display timing parameter too high or too low may cause it to wrap around and thus become completely wrong. Validate the timings in atmel_lcdfb_check_var() and saturate to the highest or lowest possible value if necessary. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fb: defio nopageNick Piggin
Convert fb defio from nopage to fault. Switch from OOM to SIGBUS if the resource is not available. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbmon: cleanup trailing whitespacesAndre Haupt
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbmon: remove unnecessary local variableAndre Haupt
This fixes a sparse warning about symbol 'i' shadowing an earlier one. Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/video: remove unnecessary pci_dev_putJulia Lawall
pci_get_class implicitly does a pci_dev_put on its second argument, so pci_dev_put is only needed if there is a break out of the loop. The semantic match detecting this problem is as follows: // <smpl> @@ expression dev; expression E; @@ * pci_dev_put(dev) ... when != dev = E ( * pci_get_device(...,dev) | * pci_get_device_reverse(...,dev) | * pci_get_subsys(...,dev) | * pci_get_class(...,dev) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06video/hpfb.c section fixAdrian Bunk
WARNING: vmlinux.o(.text+0xb851a): Section mismatch: reference to .init.text:hpfb_init_one (between 'hpfb_dio_probe' and 'read_null') hpfb_init_one() must be __devinit since it's called by the __devinit hpfb_dio_probe(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06make video/geode/lxfb_core.c:geode_modedb[] staticAdrian Bunk
geode_modedb[] can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06cleanup after APUS removalAdrian Bunk
After the APUS removal, some code can be removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Remove pointless casts from void pointersJeff Garzik
Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fix ! versus & precedence in various placesAlexey Dobriyan
Fix various instances of if (!expr & mask) which should probably have been if (!(expr & mask)) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06[POWERPC] Xilinx: Update compatible to use values generated by BSP generator.Stephen Neuendorffer
Mainly, this involves two changes: 1) xilinx->xlnx (recognized standard is to use the stock ticker) 2) In order to have the device tree focus on describing what the hardware is as exactly as possible, the compatible strings contain the full IP name and IP version. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06[POWERPC] Fix incorrectly tagged __devinitdata structuresGrant Likely
Fix compile errors in the xilinxfb, xsysace and uartlite drivers used by the Xilinx Virtex platform Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
2008-02-03drivers/video/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-01USB: sisusb: *_ioctl32_conversion functions do not exist in recent kernelsFernando Luis Vázquez Cao
Remove dead code while at it. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30x86: cpa: move flush to cpaThomas Gleixner
The set_memory_* and set_pages_* family of API's currently requires the callers to do a global tlb flush after the function call; forgetting this is a very nasty deathtrap. This patch moves the global tlb flush into each of the callers Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: convert CPA users to the new set_page_ APIArjan van de Ven
This patch converts various users of change_page_attr() to the new, more intent driven set_page_*/set_memory_* API set. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (54 commits) MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic [Blackfin] arch: remove old I2C BF54x porting. [Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't compile without it. [Blackfin] arch: fix bug kernel boot message: memory information is not reasonable [Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver [Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up [Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core. [Blackfin] arch: Add proper SW System Reset delay sequence [Blackfin] arch: Update copyright date [Blackfin] arch: GPIO API cleanup and anomaly update [Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface [Blackfin] arch: Initial checkin of the memory protection support. [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option [Blackfin] arch: Add some comments - fix semicolons [Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/ [Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted [Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards [Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel [Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on [Blackfin] arch: update to latest anomaly sheets ...
2008-01-27i2c/tps65010: move header to <linux/i2c/...>David Brownell
Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: normal_i2c can be made const (remaining drivers)Jean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-26[ARM] 4764/1: [AT91] AT91CAP9 core supportAndrew Victor
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-25Disable VGA text console for AVR32 architectureHans-Christian Egtvedt
This patch disables the VGA text console for AVR32 architecture since it does not provide the vga.h include file. AVR32 users should use framebuffer console instead if they need a console on an attached display. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-21s3c2410_fb: fix line length calculationStefan Schmidt
Fix line length calculation. var->width is the size of the display in mm. We like to use the pixel size. Without this fix, dynamic (fbset) based resolution and depths changes with s3c2410_fb don't work at all. Spotted by john cass <johnpcass@yahoo.com> Signed-off-by: Stefan Schmidt <stefan@openmoko.org> Signed-off-by: Harald Welte <laforge@openmoko.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-17fix radeonfb regression with Xpress 200m 5955Alex
Fix http://bugzilla.kernel.org/show_bug.cgi?id=9762 Framebuffer is ok only with default parameters only (it is 1280x800-8@60). If parameters are video=radeonfb:1280x800-32@60 then xres, yres and xres_virtual are ok but yres_virtual is 1024. It can be corrected by fbset utility so I think it can be corrected in the driver code also. Steps to reproduce: video=radeonfb:1280x800-32@60 or video=radeonfb:1280x800-16@60 Add 1280x800 mode into modedb Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14uvesafb: fix section mismatch warningsRandy Dunlap
Mark uvesafb_init_mtrr() as __devinit since its caller is __devinit and since it accesses __devinitdata. WARNING: vmlinux.o(.text+0x4df80e): Section mismatch: reference to .init.data: (between 'uvesafb_init_mtrr' and 'uvesafb_show_vbe_ver') Variable 'blank' cannot be __devinitdata since it is referenced in an fb_ops method that could be called at any time. WARNING: vmlinux.o(.text+0x4dfc1e): Section mismatch: reference to .init.data:blank (between 'param_set_scroll' and 'vesa_setpalette') WARNING: vmlinux.o(.text+0x4dfc24): Section mismatch: reference to .init.data:blank (between 'param_set_scroll' and 'vesa_setpalette') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14s3c2410fb: fix incorrect argument type in resume functionKrzysztof Helt
Fix wrong pointer type passed into the s3c2410fb_init_registers() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14MAINTAINERS: email update and add missing entryNicolas Ferre
- MAINTAINERS email update - add atmel_lcdfb entry Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11ps3fb: fix deadlock on kexec()Jeremy Kerr
Since the introduction of the acquire_console_sem calls in 0333d83509c7d8496c8965b5ba9bc0c98e83c259, kexecing can cause the kernel to deadlock: ps3fb_shutdown() -> unregister_framebuffer() -> fb_notifier_call_chain(FB_EVENT_FB_UNBIND) -> fbcon_fb_unbind() -> unbind_con_driver() -> bind_con_driver() [ acquires console_sem ] -> fbcon_deinit() -> fbops->fb_release(newinfo, 0) -> ps3fb_release() -> ps3fb_sync() [ acquires console_sem ] This change avoids the deadlock by moving the acquire_console_sem() out of ps3fb_sync(), and puts it into the two other callsites, leaving ps3fb_release() to call ps3fb_sync() without the console semaphore. [Geert] - Corrected call sequence above - ps3fb_release() may be called with and without console_sem held. This is an inconsistency that should be fixed at the fb level, but for now, try to acquire console_sem in ps3fb_release(). I think it's safer to let ps3fb_release() try to acquire console_sem and not refresh the screen if it fails, than to call ps3fb_sync() without holding console_sem, as ps3fb_par may be modified at the same time, causing crashes or lockups. Besides, ps3fb_release() only calls ps3fb_sync() to refresh the screen when display flipping is disabled, which is an uncommon case (except during shutdown/kexec). Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11ps3fb: prevent use after free of fb_infoJeremy Kerr
In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in dev->core.driver_data) to be free()ed, which we potentially access from the ps3fbd kthread. This change frees the framebuffer after stopping the ps3fbd kthread. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-19ps3fb: Fix ps3fb free_irq() dev_idGeoff Levand
The dev_id arg passed to free_irq() must match that passed to request_irq(). Fixes this PS3 error message: Trying to free already-free IRQ 44 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-19ps3fb: Update for firmware 2.10Geert Uytterhoeven
ps3fb: Update for firmware 2.10 As of PS3 firmware version 2.10, the GPU command buffer size must be at least 2 MiB large. Since we use only a small part of the GPU command buffer and don't want to waste precious XDR memory, move the GPU command buffer back to the start of the XDR memory reserved for ps3fb and let the unused part overlap with the actual frame buffer. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29x86_64 EFI boot support: EFI frame buffer driverHuang, Ying
This patch adds Graphics Output Protocol support to the kernel. UEFI2.0 spec deprecates Universal Graphics Adapter (UGA) protocol and only Graphics Output Protocol (GOP) is produced. Therefore, the boot loader needs to query the UEFI firmware with appropriate Output Protocol and pass the video information to the kernel. As a result of GOP protocol, an EFI framebuffer driver is needed for displaying console messages. The patch adds a EFI framebuffer driver. The EFI frame buffer driver in this patch is based on the Intel Mac framebuffer driver. The ELILO bootloader takes care of passing the video information as appropriate for EFI firmware. The framebuffer driver has been tested in i386 kernel and x86_64 kernel on EFI platform. Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29imacfb: remove reference to otherwise-unused, non-existent ↵Andrew Morton
screen_info.imacpm_seg Cc: Edgar Hucek <hostmaster@ed-soft.at> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29atmel_lcdfb: LCDC startup fixAnti Sullin
This patch adds an additional loop, that delays turning off the DMA until the LCDC core has been turned off. This prevents the picture to be shifted some random length when the kernel re-initializes the LCDC. Without this patch, the LCDC keeps running for some small time after the PWRCON:LCD_PWR has been cleared ; the FIFO suffers an underrun and on re-starting the LCDC the FIFO data stays shifted. This behavior has been seen and fixed on AT91SAM9261-EK and two custom AT91SAM9261 boards, all of them having different LCD panels. Thanks a lot to Anti Sullin for submitting this patch (long time ago). Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fb_ddc: fix DDC lines quirkJean Delvare
The code in fb_ddc_read() is said to be based on the implementation of the radeon driver: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fc5891c8a3ba284f13994d7bc1f1bfa8283982de However, comparing the old radeon driver code with the new fb_ddc code reveals some differences. Most notably, the I2C bus lines are held at the end of the function, while the original code was releasing them (as the comment above correctly says.) There are a few other differences, which appear to be responsible for read failures on my system. While tracing low-level I2C code in i2c-algo-bit, I noticed that the initial attempt to read the EDID always failed. It takes one retry for the read to succeed. As we are about to remove this automatic retry property from i2c-algo-bit, reading the EDID would really fail. As a summary, the I2C lines quirk which is supposedly needed to read EDID on some older monitors is currently breaking the (first) read on all other monitors (and might not even work with older ones - did anyone try since October 2006?) After applying the patch below, which makes the code in fb_ddc_read() really similar to what the radeon driver used to have, the first EDID read succeeds again. On top of that, as it appears that this code has been broken for one year now and nobody seems to have complained, I'm curious if it makes sense to keep this quirk in place. It makes the code more complex and slower just for the sake of monitors which I guess nobody uses anymore. Can't we just get rid of it? Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Roger Leigh <rleigh@whinlatter.ukfsn.org> Tested-by: Michael Buesch <mb@bu3sch.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29ps3fb: video memory size cleanupsGeert Uytterhoeven
- Limit video memory size to avoid crossing a 256 MiB boundary in IOIF space. - Pass the actual amount of video memory used to lv1_gpu_memory_allocate(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (56 commits) Blackfin arch: fix bug when enable uart1 with uart0 disabled => no initial console Blackfin arch: split apart dump_bfin_regs and merge/remove show_regs from process.c, which was largely duplicated Blackfin arch: use common __INIT/__FINIT defines rather than setting the .section ourselves to .init.text Blackfin arch: fix bug when sending signals with the wrong PC, cause gdb get confused Blackfin arch: Ensure we printk out strings with the proper loglevel Blackfin arch: Need to specify ax with the .init.text section, Blackfin arch: Update Kconfig to latest Blackfin silicon datasheets Blackfin arch: update defconfig files Blackfin arch: Fix typo, and add ENDPROC - no functional changes Blackfin arch: convert READY to DMA_READY as it causes build errors in common sound code otherwise Blackfin arch: add defines for the on-chip L1 ROM of BF54x Blackfin arch: cplb and map header file cleanup Blackfin arch: cleanup the cplb declares Blackfin arch: fix broken on BF52x, remove silly checks on processors for L1_SCRATCH defines Blackfin arch: add support for working around anomaly 05000312 Blackfin arch: cleanup BF54x header file and add BF547 definition Blackfin arch: fix building for BF542 processors which only have 1 TWI Blackfin arch: rename _return_from_exception to _bfin_return_from_exception and export it Blackfin arch: move EXPORT_SYMBOL() to C files where the symbol is actually defined Blackfin arch: fix bug NOR Flash MTD mount fail ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:32:01 +0000