aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-10-04[PATCH] hisax niccy cleanupJiri Slaby
Whitespace cleanup, delete unnecesasry parenthesis and braces. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: properly use the new multi block-write error handlingPierre Ossman
Use the new multi block-write error reporting flag and properly tell the block layer how much data was transferred before the error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: use own work queuePierre Ossman
The MMC layer uses the standard work queue for doing card detection. As this queue is shared with other crucial subsystems, the effects of a long (and perhaps buggy) detection can cause the system to be unusable. E.g. the keyboard stops working while the detection routine is running. The solution is to add a specific mmc work queue to run the detection code in. This is similar to how other subsystems handle detection (a full kernel thread is the most common theme). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: avoid some resets without cardPierre Ossman
Some Ricoh controllers only respect a full reset when there is no card in the slot. As we wait for the reset to complete, we must avoid even requesting those resets on the buggy controllers. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: fix MMIO vs memory races in sdhciPierre Ossman
Sprinkle some mmiowb() where needed (writeX() before unlock()). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/MakefileAlex Dubov
Signed-off-by: Alex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] mmc: driver for TI FlashMedia card reader - sourceAlex Dubov
Driver for TI Flash Media card reader. At present, only MMC/SD cards are supported. [akpm@osdl.org: cleanups, build fixes] Signed-off-by: Alex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] scx200_hrt: fix precedence bug manifesting as 27x clock in 1 MHz modeJim Cromie
Fix paren-placement / precedence bug breaking initialization for 1 MHz clock mode. Also fix comment spelling error, and fence-post (off-by-one) error on symbol used in request_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=7242 Thanks alexander.krause@erazor-zone.de, dzpost@dedekind.net, for the reports and patch test, and phelps@mantara.com for the independent patch and verification. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: <alexander.krause@erazor-zone.de> Cc: <dzpost@dedekind.net> Cc: <phelps@mantara.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] fix "PCI: assign ioapic resource at hotplug"Kenji Kaneshige
Roland Dreier wrote: > The change "PCI: assign ioapic resource at hotplug" (commit > 23186279658cea6d42a050400d3e79c56cb459b4 in Linus's tree) makes > networking stop working on my system (SuperMicro H8QC8 with four > dual-core Opteron 885 CPUs). In particular, the on-board NIC stops > working, probably because it gets assigned the wrong IRQ (225 in the > non-working case, 217 in the working case) > > With that patch applied, e1000 doesn't work. Reverting just that > patch (shown below) from Linus's latest tree fixes things for me. > The cause of this problem might be an wrong assumption that the 'start' member of resource structure for ioapic device has non-zero value if the resources are assigned by firmware. The 'start' member of ioapic device seems not to be set even though the resources were actually assigned to ioapic devices by firmware. Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] pktcdvd: rename a variable for better readabilityThomas Maier
pktcdvd: Rename a variable for better readability. Signed-off-by: Thomas Maier <balagi@justmail.de> Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] pktcdvd: Replace pktcdvd strings with macro DRIVER_NAME.Thomas Maier
pktcdvd: Replace pktcdvd strings with macro DRIVER_NAME. Signed-off-by: Thomas Maier <balagi@justmail.de> Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] Char: serial167, remove useless tty checkJiri Slaby
serial167, remove useless tty check tty is dereferenced before it is checked to be non-NULL. Remove such check. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] char: kill unneeded memsetsJiri Slaby
char, another tmp_buf cleanup No need to allocate one page as a side buffer. It's no more used. Clean this (de)allocs of this useless memory pages in char subtree. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits) Add missing maintainer countries in CREDITS Fix bytes <-> kilobytes typo in Kconfig for ramdisk fix a typo in Documentation/pi-futex.txt BUG_ON conversion for fs/xfs/ BUG_ON() conversion in fs/nfsd/ BUG_ON conversion for fs/reiserfs BUG_ON cleanups in arch/i386 BUG_ON cleanup in drivers/net/tokenring/ BUG_ON cleanup for drivers/md/ kerneldoc-typo in led-class.c debugfs: spelling fix rcutorture: Fix incorrect description of default for nreaders parameter parport: Remove space in function calls Michal Wronski: update contact info Spelling fix: "control" instead of "cotrol" reboot parameter in Documentation/kernel-parameters.txt Fix copy&waste bug in comment in scripts/kernel-doc remove duplicate "until" from kernel/workqueue.c ite_gpio fix tabbage fix file specification in comments ... Fixed trivial path conflicts due to removed files: arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c
2006-10-03Fix bytes <-> kilobytes typo in Kconfig for ramdiskChristian Borntraeger
This is a small fix for a typo in Kconfig. The default value for the block size is 1024 bytes not 1024 kilobytes. Signed-off-by: Christian Borntraeger <borntrae@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03BUG_ON cleanup in drivers/net/tokenring/Eric Sesterhenn
This patch converts one if() BUG(); to BUG_ON(); so it can be safely optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03BUG_ON cleanup for drivers/md/Eric Sesterhenn
This changes two if() BUG(); usages to BUG_ON(); so people can disable it safely. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()
2006-10-03kerneldoc-typo in led-class.cHenrik Kretzschmar
Fixes a typo in led-class.c kerneldoc. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03parport: Remove space in function callsMatthew Martin
This removes the space in function calls in drivers/parport/daisy.c Signed-off-by: Matthew Martin <lihnucks@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03ite_gpio fix tabbageJim Cromie
caught some leading spaces in passing. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03Fix "can not" in Documentation and KconfigMatt LaPlante
Randy brought it to my attention that in proper english "can not" should always be written "cannot". I donot see any reason to argue, even if I mightnot understand why this rule exists. This patch fixes "can not" in several Documentation files as well as three Kconfigs. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03[WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()Wim Van Sebroeck
Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands. ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead. Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-10-03Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt.c shutdown patch [WATCHDOG] iTCO_wdt.c - pci_dev_put fix [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver
2006-10-03Still more typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03more misc typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03Fix several typos in drivers/Matt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03fix drivers/acpi/Kconfig typosMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03remove mentionings of devfs in documentationAdrian Bunk
Now that devfs is removed, there's no longer any need to document how to do this or that with devfs. This patch includes some improvements by Joe Perches. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME. [MIPS] DECstation defconfig update [MIPS] Fix size of zones_size and zholes_size array [MIPS] BCM1480: Mask pending interrupts against c0_status.im. [MIPS] SB1250: Interrupt handler fixes [MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support. [MIPS] Remove Atlas and SEAD from feature-removal-schedule. [MIPS] Remove Jaguar and Ocelot family from feature list. [MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems [MIPS] Remove dead DECstation boot code [MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary
2006-10-03[WATCHDOG] iTCO_wdt.c shutdown patchWim Van Sebroeck
Since we are using the device driver model, we don't need to arrange the shutdown via a reboot_notifier. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-03[WATCHDOG] iTCO_wdt.c - pci_dev_put fixWim Van Sebroeck
for_each_pci_dev calls pci_get_device (and thus it calls pci_dev_get). So we need to do a pci_dev_put to keep the refcounting correct. (Thanks to Jiri Slaby <jirislaby@gmail.com>) Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-03[WATCHDOG] iTCO_wdt (Intel TCO Timer) driverWim Van Sebroeck
Convert the iTCO_wdt driver to a platform device driver. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-03[WATCHDOG] iTCO_wdt (Intel TCO Timer) driverWim Van Sebroeck
Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller Hub family (from ICH0 up to ICH7) and in the Intel 6300ESB controller hub. This driver will replace the i8xx_tco.c driver. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-03V4L/DVB (4699): CX24109 patch to eliminate the weird mis-tuningsSteven Toth
A number of people have been reporting wierd tuning problems with various cards. Yeasah tracked down the problem to a miss-read datasheet. This resolves the problems. Signed-off-by: Yeasah Pell <yeasah@schwide.net> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4698): Fix S-Video configuration for Pinnacle PCTV-SatMauro Carvalho Chehab
Thanks to Edgar Toernig <froese@gmx.de> for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4689): Adding support for Nova-T-PCI PCI ID 0070:9000Steven Toth
Adding support for Nova-T-PCI PCI ID 0070:9000 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4688): Fix msp343xG handling (regression from 2.6.16)Hans Verkuil
The msp3430G and msp3435G models cannot do Automatic Standard Detection. So these should be forced to BTSC. These chips are early production versions for the msp34xxG series and are quite rare. The workaround for kernel 2.6.18 is to use 'standard=32' as msp3400 module option. Due to broken handling of the 'standard' option in 2.6.17 there is no workaround possible for that kernel. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4686): Cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 2Michael Krufky
Add support for DViCO FusionHDTV DVB-T Dual Digital 2 USB, which is identical to the usb portion of DViCO FusionHDTV DVB-T Dual Digital 1. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4685): Fix compiler warning in drivers/media/video/video-buf.cSujoy Gupta
Using a double cast to avoid compiler warnings when building for PAE. Compiler doesn't like direct casting of a 32 bit ptr to 64 bit integer. Signed-off-by: Martin J. Bligh <mbligh@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4684): Drivers/media/video/cx88: Remove unused defined FALSE/TRUERichard Knutsson
Remove defines of FALSE/TRUE because they are not used. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4683): Norm_notchfilter is used on just one point and argument is bogusMauro Carvalho Chehab
Removed norm_notchfilter function. All the code is bound to 4 x FSC, so, any other filter won't work fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4681): Cx88: fix analog capture notch filterLars Gjesse Kjellberg
This patch changes the setting of the cx2388x notch filter to match that of the video capture sample frequency, removing some annoying interference lines THAT would appear when capturing composite video. This has been tested in PAL and NTSC TV norms. It sets the Y/C separation luma notch filter, which removes the chroma signal from the luma signal when using a composite input. The luma notch filter operates at the video decoder's frequency, not the ADC's frequency or at the frequency of the scaled video. Y/C separation happens after the sample rate converter, before video scaling. The datasheet provides plots of the filter response for three _video decoder_ frequencies, 4x Fsc, square pixel, and ccir601. These are the same three frequencies for the notch filter control. It seems pretty clear that this filter should be set based on the video decoder frequency. The cx88 driver always uses a video decoder frequency of 4xFsc. Signed-off-by: Lars Gjesse Kjellberg <lars.g.kjellberg@get2net.dk> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4679): Fix for NULL pointer dereference oops during boot.Steven Toth
A fix for intermittent oops's during boot which occurs in cx88_call_i2c_clients when dvb_attach is bringing up the frontend. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4675): Pvrusb2: Fix VIDIOC_INT_[G|S]_REGISTER so that it actually ↵Mike Isely
works now Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4674): Use NULL instead of 0 for ptrsRandy Dunlap
Use NULL instead of 0 for pointer value, eliminate sparse warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4671): Support for SAA7134-based AVerTV Hybrid A16ARPetr Baudis
This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested only the DVB since I don't have any proper antenna available and I can receive even the DVB just barely so; I can hear noise in the FM part but I couldn't catch any station, then again I don't have an FM antenna either. The PAL/FM and IR control data are based on what I harvested on the 'net. Perhaps I or someone else will fix them if they turn out to be wrong. Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4670): Allow RC5 codes 64 - 127 in ir-kbd-i2c.cDavid Hardeman
The RC5 coding has for a long time supported commands 64-127 in addition to 0-63. This is controlled by the second bit of the RC5 packet (see The attached patch modifies ir-kbd-i2c.c to allow for commands 64-127, tested with a PVR350 card in combination with a programmable remote. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4669): Cx88: autodetect Club3D Zap TV2100 by subsystem id 12ab:2300Michael Krufky
The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and KWorld/VStream XPert DVB-T with cx22702 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>