aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-15ide-tape: always log debug info in idetape_pc_intr() if debugging is enabledBartlomiej Zolnierkiewicz
Add DBG_PC_INTR debug level and use it to always log debug info in idetape_pc_intr() if debugging is enabled. While at it: * Use drive->name instead of tape->name. * Log device name with "DMA finished" message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: add ide_tape_io_buffers() helperBartlomiej Zolnierkiewicz
* Add ide_tape_io_buffers() helper which is a wrapper for idetape_{in,out}put_buffers() and convert idetape_pc_intr() to use it. * Remove no longer used idetape_io_buf typedef. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>---
2008-07-15ide-tape: factor out DSC handling from idetape_pc_intr()Bartlomiej Zolnierkiewicz
Factor out DSC handling from idetape_pc_intr() to ide_tape_handle_dsc() helper as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: move checking of ->failed_pc to ->callbackBartlomiej Zolnierkiewicz
Move checking/resetting of ->failed_pc from ide*_pc_intr() to ->callback as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>---
2008-07-15ide: add ide_issue_pc() helperBartlomiej Zolnierkiewicz
Add generic ide_issue_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add PC_FLAG_DRQ_INTERRUPT pc flagBartlomiej Zolnierkiewicz
Add PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request() and check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT) in ide*_issue_pc(). This is a preparation for adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()Bartlomiej Zolnierkiewicz
Move idescsi_map_sg() call out from idescsi_issue_pc() to idescsi_do_request() as a preparation to adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add ide_transfer_pc() helperBartlomiej Zolnierkiewicz
* Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: set drive->scsi flag for devices handled by the driverBartlomiej Zolnierkiewicz
This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{cd,floppy,tape}: remove checking for drive->scsiBartlomiej Zolnierkiewicz
Remove checking for drive->scsi which is no longer set by IDE core code (leave the flag since it will be re-used for generic ATAPI support). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add PC_FLAG_ZIP_DRIVE pc flagBartlomiej Zolnierkiewicz
Add PC_FLAG_ZIP_DRIVE pc flag, set it in idefloppy_do_request() and check for it (instead of checking for IDEFLOPPY_FLAG_ZIP_DRIVE) in idefloppy_transfer_pc(). This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: factor out waiting for good ireason from idetape_transfer_pc()Bartlomiej Zolnierkiewicz
Factor out waiting for good ireason from idetape_transfer_pc() to ide_tape_wait_ireason() as a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()Bartlomiej Zolnierkiewicz
Set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() instead of idetape_issue_pc() to match the other ATAPI device drivers. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-floppy: start DMA engine in idefloppy_transfer_pc1()Bartlomiej Zolnierkiewicz
Start DMA engine and set PC_FLAG_DMA_IN_PROGRESS flag in idefloppy_transfer_pc1() instead of idefloppy_issue_pc() so the Status Register and the Interrupt Reason Register are checked first. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OKBartlomiej Zolnierkiewicz
* Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one. * Remove no longer used PC_FLAG_DMA_RECOMMENDED flag. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callbackBartlomiej Zolnierkiewicz
Merge pc->idefloppy_callback and pc->idetape_callback into pc->callback. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-floppy: merge callbacksBorislav Petkov
The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it, simplify if (floppy->failed_pc)-branch to be found in the original idefloppy_request_sense_callback(). Bart: - keep handling for blk_pc_request() requests unchanged + add FIXME - add uptodate variable + leave just one idefloppy_end_request() call - add newline to the debug message Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: make pc->idetape_callback voidBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: merge callbacksBartlomiej Zolnierkiewicz
The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it: - add uptodate variable + leave just one idetape_end_request() call - don't use HWGROUP() macro Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: make idetape_retry_pc() voidBartlomiej Zolnierkiewicz
idetape_retry_pc() always returns ide_stopped so make it void. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape,scsi}: log device name instead of driver nameBartlomiej Zolnierkiewicz
Log device name instead of driver name in *_pc_intr() and *_transfer_pc*(). While at it: * Merge two consecutive printk()-s in *_pc_intr() together. * Replace "floppy"/"tape"/"scsi" references in printk()-s by "device". Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()Bartlomiej Zolnierkiewicz
* Check IDEFLOPPY_FLAG_ZIP_DRIVE flag in idefloppy_transfer_pc1() and skip idefloppy_transfer_pc2()-phase if the flag is not set. * Always use idefloppy_transfer_pc1() in idefloppy_issue_pc() and remove no longer needed idefloppy_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove SIMULATE_ERRORS debug codeBartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove stale comments from idetape_pc_intr()Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdefBartlomiej Zolnierkiewicz
PC_FLAG_DMA_IN_PROGRESS flag is never set if DMA support is disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove superfluous warning message from idetape_issue_pc()Bartlomiej Zolnierkiewicz
ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: remove superfluous error message from idetape_pc_intr()Bartlomiej Zolnierkiewicz
ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq()Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: add debug_log() macroBartlomiej Zolnierkiewicz
Add debug_log() macro and convert the driver to use it. [ This makes debug messages to be always prefixed with "ide-scsi: " and use KERN_INFO level. ] While at it: * Change "DMA complete" debug message to "DMA finished" to match other ATAPI device drivers. * Use __func__. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc()Bartlomiej Zolnierkiewicz
ide_set_handler() bugs on ->handler == NULL so no need to do it in idescsi_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers()Bartlomiej Zolnierkiewicz
* Merge idescsi_input_buffers() and idescsi_output_buffers() into ide_scsi_io_buffers() helper. While at it: * Log device name instead of driver name on error. * Use xfer_func_t. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()Bartlomiej Zolnierkiewicz
Set PC_FLAG_WRITING pc flag in idescsi_queue() (if needed) and then fix Interrupt Reason checking in idescsi_pc_intr(). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: fix handling of DMA errors in idescsi_pc_intr()Bartlomiej Zolnierkiewicz
Check return value of ->dma_end method and if there was a DMA error handle it accordingly (set PC_FLAG_DMA_ERROR pc flag, don't update pc->xferred and increase rq->errors). Also move debug message in the right place while at it. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr()Bartlomiej Zolnierkiewicz
If DRQ bit of Status Register is not cleared it is an error condition and should be handled accordingly (disable DMA + reset the device). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: fix race in idescsi_transfer_pc()Bartlomiej Zolnierkiewicz
Start DMA engine before sending content of packet command (otherwise it is possible that IRQ will happen before DMA engine is started). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove action argument in ide_do_drive_cmdFUJITA Tomonori
ide_do_drive_cmd is called only with ide_preempt action argument. So we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. This patch also includes two minor cleanups: 1) ide_do_drive_cmd always succeeds so we don't need the return value; 2) the callers use blk_rq_init before ide_do_drive_cmd so there is no need to initialize rq->errors. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowaitFUJITA Tomonori
All the callers of ide_do_drive_cmd() except for ide-scsi use ide_preempt action argument. This converts ide-scsi to use blk_execute_rq_nowait instead of ide_do_drive_cmd so that we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove drive->ctlBartlomiej Zolnierkiewicz
Remove drive->ctl (it is always equal to 0x08 after init time). While at it: * Use ATA_DEVCTL_OBS define. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: use ->OUTBSYNC in init_irq()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC methodBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove ->mmio flag from ide_hwif_tBartlomiej Zolnierkiewicz
Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup() and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely remove ->mmio flag. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: move IRQ unmasking out from ->tf_load methodBartlomiej Zolnierkiewicz
Move IRQ unmasking out from ->tf_load method to its users. There should be no functional changes caused by this patch (SELECT_MASK() is NOP except for hpt366, icside and sgiioc4). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flagBartlomiej Zolnierkiewicz
Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK taskfile flag. This change should only affect hpt366 and icside host drivers since ->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: fix do_probe() to use SELECT_DRIVE()Bartlomiej Zolnierkiewicz
Fix one place in do_probe() which used ->OUTB directly instead of calling SELECT_DRIVE() (so ->selectproc method is also used). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove commented out code from ide_config_drive_speed()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15sgiioc4: use ->extra_base instead of ->dma_status for dma_handleBartlomiej Zolnierkiewicz
This is a preparation for removal of ->dma_status field from ide_hwif_t. There should be no functional changes caused by this patch. Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove try_to_flush_leftover_data()Bartlomiej Zolnierkiewicz
Just use the new & shiny ide_pad_transfer() helper instead. Also remove the superfluous check for 'drive->media == ide_disk' while at it (ide_ata_error() is used only for ide_disk devices). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove obsoleted "ide=" kernel parametersBartlomiej Zolnierkiewicz
* Remove obsoleted "ide=" kernel parameters. * Remove no longer needed: - ide_setup() - parse_options() - __setup("", ...) - module_param(options, ...) * Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef. * Make ide_*acpi* and ide_doubler variables static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: cleanup init_ide_data()Bartlomiej Zolnierkiewicz
* Remove no longer need init_ide_data() call from ide_setup(). * Cleanup init_ide_data(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove obsoleted "hdx=" kernel parametersBartlomiej Zolnierkiewicz
* Remove obsoleted "hdx=" kernel parameters. * Remove no longer used stridx() and match_parm(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 08:13:42 +0000