aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-28iwlwifi: mark more functions/variables staticChristoph Hellwig
mark more functions/variables static Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Update iwlwifi version stamp to 1.1.19Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Update iwlwifi version stamp to 1.1.18Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwl4965: exclude 60M rate from probe requestmabbas
This patch do the following 2 things: 1. Make sure we don't add rate 60M part of supported rate in proble request, some AP does not like that. 2. It is wrong to set priv->active_rate in this function, this will set it to all avialable rates which might overwrite the mode supported rate. priv->active_rate should be set by only from iwl_set_rate. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Renames struct fw_image_desc to struct fw_descTomas Winkler
This patche shortens the name of struct fw_image_desc to be struct fw_desc. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: add 5965 SCD registers to iwl-prph.hEmmanuel Grumbach
This patch adds SCD registers for 5965 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: move 3945 SCD registers to iwl-prph.hEmmanuel Grumbach
This patch moves 3945 SCD registers to iwl-prph.h. These registers are assigned from the periphery bus Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi-ht: move 4965 SCD registers to iwl-prph.hEmmanuel Grumbach
This patch moves 4965 SCD registers to iwl-prph.h. These registers are assigned from the periphery bus Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: replacing wording restricted to nic access in iwl-ioTomas Winkler
This patch replaces wording 'restricted' with more appropriate 'nic access' NIC access is grabbed to prevent NIC entering power save mode General cleanup of iwl-io.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: rename restricted_mem to targ_memTomas Winkler
This patch renames restricted_mem suffix with more proper name targ_mem for function accessing memory on the nic in target mode Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: replace restricted_reg with prphTomas Winkler
This patch renames restricted_reg suffix with more proper name prhp for function accessing registers on the periphery bus. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: accept up to 4K frame size on Rx side to fit A-MSDU framemabbas
The driver drops any Rx frame larger than 2332 bytes, but with A-MSDU frame, it could be up to 4K. This patch makes sure we can process larger A-MSDU frame. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: using PCI_DEVICE macroTomas Winkler
PCI_DEVICE macro is more concise when using defualt values in device definitions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove cck_power_index_compensationTomas Winkler
cck_power_index_compensation variable was never used Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove late null-check and duplicate bug_onIan Schram
These pieces of code appear to be useless. The BUG_ON is also performed in iwl_send_cmd_async. Serious karma would be needed to enter iwl_ativate_qos with a null priv. I had a deja vu when patching this, but for the life of me I couldn't track down a similar patch. Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Beautify by removing superfluous newlines and codeIan Schram
Moving code around, lindent, and whatnot created several places where there appeared to be an 75 column "rule" instead of 80. This patch removes those that I can spot, hopefully increasing readability. Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Two comments in iwl-3945.c were longer than 80 columnsIan Schram
This patch shorten two comments lines in iwl-3945.c Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove cck_flag from iwl_driver_hw_infoTomas Winkler
This patch remove cck_flag from iwl_driver_hw_info, this flag is unused after spliting the iwl-base.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: add TGN flag to qos parametersTomas Winkler
This patch adds TGN flag to QoS parameters. This flag governs enablement of NAV shortening with CF-End and filters in 4 or 8K RX AMSDU packets Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: rs-4965 fix return valuesTomas Winkler
This patch cleans up style of 'return' of rate scale 4965 functions. It renames return name variables rc to ret, change functions to void if no meaningful value was returned it add return of -EINVAL for checks of wrong arguments. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: renaming last_used and first_emptyTomas Winkler
This patch renames queue pointers to write_ptr and read_ptr instead of first_empty and last_used. This is closer to technical terminology we everyday use Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: rename iwl_eeprom_aqcuire_semaphore to _acquire_Ian Schram
Correct the spelling of aqcuire. Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: fix various spelling and typosIan Schram
Fixing various spelling errors and typos. Mostly in comments. In total 27 words were corrected, some of which occurred more than ones. Signed-Of-By: Ian Schram <ischram@telenet.be> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Add erp_ie_changed hanlderTomas Winkler
This patch adds erp_ie_changed handler to iwl4956 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Release rt2x00 2.0.12Ivo van Doorn
Version bump. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Correctly set ACK bit in tx descriptorsMattias Nissler
Add a flag to struct txdata_entry_desc that specifies whether an ack for the frame is to be expected. Use this flag to set the ACK bit in the tx descriptor. Previously, the ACK bit could be set incorrectly on CTS-to-self frames, so they caused retries and were reported to be failed in the txdone handlers. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Place mutex around USB register accessAdam Baker
There is a buffer, csr_cache which is used to hold copies of data being passed to the USB stack which can get corrupted if multiple threads attempt to access CSR registers simultaneously. There is also the possibility if multiple threads try to access BBP or RF registers for the multiple USB operations needed to get interleaved leading to incorrect results. This patch introduces a mutex to prevent such simultaneous access. The interleaved access problem may also affect the PCI devices but if so that will be handled in a follow-up patch. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Remove data_desc structureIvo van Doorn
Coverty indicated that data_desc with a single element array is bad coding style. This removes the structure and forces everybody to use __le32. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Rework rt73 antenna selectionMattias Nissler
This patch changes rt73 antenna selection to what I believe is the correct way. It also fixes a small selection bug that switched the antennas by accident. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Remove unused variablesIvo van Doorn
With the updated antenna setup the following variables are no longer used. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Rework rt61 antenna selection.Mattias Nissler
This patch changes rt61 antenna selection again. It helps at least with the rt61 pci card in my box, I hope I haven't broken behaviour on other RF chips. RF 2529 antenna setup is incomplete, we need to at code for diversity when we figure out how it is done properly. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Unconstify rt2x00devAdam Baker
Some register accesses need rt2x00dev to be non-const they all need modifying so the prototype is consistent. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Detect initial rfkill state on registerIvo van Doorn
When registering rfkill, make sure a initial poll event is directly executed to detect the initial rfkill state and send the event to the rfkill layer. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Input-polldev requires input deviceIvo van Doorn
input-polldev requires a correctly allocated and initialized input device to be set for the input_polled_dev->input field. Failure to do that will prevent correct polling of the device. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Split rt61/rt73 antenna selection into RX and TX antennaIvo van Doorn
Based on investigation of the legacy drivers, I have made the following assumptions of the antenna setup: - R77 is the TX antenna configuration - RF2529 fetches default antenna selection from NIC eeprom word With these assumptions we can change the antenna configuration to correctly read both antenna setup values and correctly configure the antenna. And we can now also configure the antenna for RF2529 without a double antenna. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28rt2x00: Disable RX when switching antennaIvo van Doorn
Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Release rt2x00 2.0.11Ivo van Doorn
Version bump. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Fix antenna selection.Mattias Nissler
In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Cleanup if-statementsIvo van Doorn
Cleanup if-statements for simple 1/0 register field values. This also fixes a endian bug in rt2500usb when working with the PHY_CSR2 initialization. As well as a bug in the enabling of the LED in rt73usb. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Implement SW diversityIvo van Doorn
When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Remove rt2x00_clear_linkIvo van Doorn
rt2x00_clear_link() was becoming too large for statically inline, also it was used on a single location and shouldn't really be used anywhere else. So move the entire code into the function rt2x00lib_start_link_tuner() Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: SW diversity should default to antenna BIvo van Doorn
Although ANTENNA_SW_DIVERSITY should never be send to the driver, we should still handle it to prevent bugs. But instead of defaulting to ANTENNA_HW_DIVERSITY we should default to ANTENNA_B instead. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00Ivo van Doorn
mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Use enum definesIvo van Doorn
When setting the default EEPROM values use the values from the enums instead of "magic" values. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[PATCH] rt2x00: Move quality statistics into seperate structureIvo van Doorn
Move all link quality statistics variables into the link_qual structure. This cleans up the link structure and allows us to use it for more then just statistics. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inet_(dev_)add_type.Eric W. Biederman
The patch extends the inet_addr_type and inet_dev_addr_type with the network namespace pointer. That allows to access the different tables relatively to the network namespace. The modification of the signature function is reported in all the callers of the inet_addr_type using the pointer to the well known init_net. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: Cleanup struct cn_callback_entryLi Zefan
- 'cb' is a fake struct member. In a previous patch struct cn_callback was renamed to cn_callback_id, so 'cb' should have been deleted at that time. - 'nls' isn't used and is redundant, we can retrieve this data through cn_callback_entry.pdev->nls. - 'seq' and 'group' should be u32, as they are declared to be u32 in other places. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: Cleanup struct cn_queue_devLi Zefan
Struct member netlink_groups is never used, and I don't see how it can be useful. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: clean up {,__}cn_rx_skb()Li Zefan
- __cn_rx_skb() does nothing but calls cn_call_callback(), it doesn't check skb and msg sizes as the comment suggests, but cn_rx_skb() checks those sizes. - In cn_rx_skb() Local variable 'len' is not used. 'len' is probably intended to be passed to skb_pull(), but here skb_pull() is not needed, instead skb_free() is called. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CONNECTOR]: add a missing break in cn_netlink_send()Li Zefan
Each entry in the list has a unique id, so just break out of the loop if the matched id is found. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 01:33:09 +0000