aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-09-27[NET]: Add Sun Cassini driver.David S. Miller
Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-09-27[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: misc. fixesMichael Chan
Fix interrupt test handler by adding check for IRQ assertion in PCI_STATE register in addition to the status block updated bit. Add test for valid ethernet address in tg3_set_mac_addr(). Add tg3_bus_string() to setup the PCI bus speed/width string for all PCI/PCIX/PCI Express devices. This is used to print the bus type during init_one(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: 5780 PHY fixesMichael Chan
Fix 5780 PHY related problems: 1. MAC_RX_MODE reset must be done before setting up the MAC_MODE register on 5705_PLUS chips or the chip will stop receiving after a while. The MAC_RX_MODE reset is needed to prevent intermittently losing the first receive packet on serdes chips. 2. Skip MAC loopback test on 5780 because of hardware errata. Normal traffic including PHY loopback is not affected by the errata. 3. PHY loopback fails intermittently on 5708S and this is fixed by putting the PHY in loopback mode first before programming the MAC mode register. A MAC_RX_MODE reset is also added. 4. Return -EINVAL in tg3_nway_reset() if device is in TBI mode. Allow nway_reset if 5780S is in parallel detect mode. 5. Add missing PHY IDs in KNOWN_PHY_ID() macro. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-09-26Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds
2005-09-26[PATCH] missing asm/irq.h (cs89x0)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[CONNECTOR]: async connector mode.Evgeniy Polyakov
If input message rate from userspace is too high, do not drop them, but try to deliver using work queue allocation. Failing there is some kind of congestion control. It also removes warn_on on this condition, which scares people. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[PATCH] pcmcia: update ID for NinjaATADominik Brodowski
Christian Zoz reported there are multiple NinjaATA devices all sharing the second product ID string, but not the first one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: more ENE bridgesDaniel Ritz
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: new IDs for serial_csDominik Brodowski
Add new ID to serial_cs.c; the CIS fimware override is available by the manufacturer at http://www.sierrawireless.com . Remember to name the CIS binary SW_7xx_SER.cis and to put it into /lib/firmware/ Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: add support for more TI bridgesDaniel Ritz
Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: fix Kconfig dependencyKomuro
TCIC depends on ISA. It is used with ISA-bus system only. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: tiny cleanupDominik Brodowski
pci_set_power_state is not needed, as we call pci_enable_device() somewhere else. Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted to bus-centric view first. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: don't mess with bridge control registerDaniel Ritz
In interrupt probing (both ISA and PCI) the bridge control register is used to change interrupt routing to ISA or PCI by changing bit 7. But this bit only controls the routing of card functional interrupts, not the CSC interrupts which are used for interrupt probing. A bad side effect of messing with this register in yenta_probe_irq() is that it can lead to irq storms if a card is inserted and already powered by the BIOS. Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: auto-tune EnE bridges for CardBus cardsDaniel Ritz
Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-24Merge master.kernel.org:/home/rmk/linux-2.6-ucbLinus Torvalds
2005-09-24Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-09-24[PATCH] Input: check switch bitmap when matching handlersDmitry Torokhov
The wwitch bitmap was added to input_device_id structure and we should check it when matching handlers and input devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-24[MFD] Fix "bious one-bit signed bitfield" errorsRussell King
ucb1x00-ts declared a couple of one-bit 'int' bitfields. Make them unsigned. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24[SERIAL] Remove unused variable in clps711x.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-23Merge branch 'upstream' from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-09-23Merge branch 'upstream-fixes' from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-09-23[PATCH] skge: fix Yukon-Lite A0 workaroundStephen Hemminger
This is one of those workarounds sucked over from sk98lin driver. The skge driver needs to detect the Yukon-Lite A0 chip properly, and turn of Rx FIFO Flush. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23Merge /spare/repo/linux-2.6/Jeff Garzik
2005-09-23[PATCH] ipmi_msghandler: inconsistent spin_lock usageHironobu Ishii
I found an inconsistent spin_lock usage in ipmi_smi_msg_received. Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23[PATCH] atyfb c99 fixAndrew Morton
- fix this: drivers/video/aty/xlinit.c: In function `atyfb_xl_init': drivers/video/aty/xlinit.c:256: warning: ISO C90 forbids mixed declarations and code - repair some kooky coding style - Use ARRAY_SIZE() Cc: Tom 'spot' Callaway <tcallawa@redhat.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23[PATCH] hisax: remove URB_ASYNC_UNLINKKarsten Keil
usb_unlink_urb is always async now, so URB_ASYNC_UNLINK was removed from core USB and we must do as well. Signed-off-by: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23[PATCH] pci: fixup parent subordinate busnrIvan Kokshaysky
I believe the change that broke things is introduction of pci_fixup_parent_subordinate_busnr(). The patch here does two things: - hunk #1 should fix the problems you've seen when you boot without additional "pci" kernel options; - hunk #2 supposedly fixes boot with "pci=assign-busses" option which otherwise hangs Acer TM81xx machines as reported. Please try this with and without "pci=assign-busses". If it boots, I'd like to see 'lspci -vvx' for both cases. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23[PATCH] 8390 Tx fix for non i386 machinesPaul Gortmaker
While this is true, E8390_CMD is zero on i386, and thus there should be no effect for these machines. Machines like Mac, Amiga etc. which use Alan's clever register mapping may have a non-zero E8390_CMD and result in bogus "transmitter busy" type messages from this bug. Fixes BUG# 3991.
2005-09-22[PATCH] mesh scsi: fix error handlingBenjamin Herrenschmidt
The PowerMac mesh SCSI driver had some missing error handling which would trigger warnings due to lack of handling of return value from scsi_add_host. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ppc64: SMU driver update & i2c supportBenjamin Herrenschmidt
The SMU is the "system controller" chip used by Apple recent G5 machines including the iMac G5. It drives things like fans, i2c busses, real time clock, etc... The current kernel contains a very crude driver that doesn't do much more than reading the real time clock synchronously. This is a completely rewritten driver that provides interrupt based command queuing, a userland interface, and an i2c/smbus driver for accessing the devices hanging off the SMU i2c busses like temperature sensors. This driver is a basic block for upcoming work on thermal control for those machines, among others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] hdaps: small update.Robert Love
- Handle dmi_system_check() elegantly, now that my bugfix is upstream. - Add support for the X41 and R52. - Cleanup some comments do I do not have to keep updating them with each new whitelisted laptop. Signed-off-by: Robert Love <rml@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] Fix mmap() of /dev/hpetKeir Fraser
The address passed to io_remap_pfn_range() in hpet_mmap() does not need to be converted using __pa(): it is already a physical address. This bug was found and the patch suggested by Clay Harris. I introduced this particular bug when making io_remap_pfn_range changes a few months ago. In fact mmap()ing /dev/hpet has *never* previously worked: before my changes __pa() was being executed on an ioremap()ed virtual address, which is also invalid. Signed-off-by: Keir Fraser <keir@xensource.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] DEBUG redefined in drivers/mtd/devices/docecc.cGrant Coady
Fix namespace clash: drivers/mtd/devices/docecc.c:43:1: warning: "DEBUG" redefined In file included from drivers/mtd/devices/docecc.c:40: include/linux/mtd/mtd.h:219:1: warning: this is the location of the previous definition Signed-off-by: Grant Coady <gcoady@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] Rename vprintk define in bttpvp.hBernd Petrovitsch
Rename the (apparently) bttv intern #define vprintk to verbprintk to resolve a name clash. Reason: vprintk() is defined in include/linux/kernel.h similar to printk but with a va_list argument. (akpm: I changed it to bttv_printk) Cc: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ub: Comment out unconditional stall clearPete Zaitcev
This code appears to be more trouble than it's worth, considering that no normal users reload drivers. So, we comment it for now. It is not removed outright for the benefit of hackers (that is, myself). Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: Add Novatel CDMA Wireless PC card IDs to airprimeDavid Hollis
USB: Add device id's for Novatel Wireless CDMA wireless PC card. The Novatel CDMA card behaves the same as the AirPrime by providing a USB serial port. Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] usb/serial/option.c: Increase input buffer sizeMatthias Urlichs
The card sometimes sends >2000 bytes in one single chunk. Ouch. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: fix pegasus driverKevin Vigor
Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: sl811-hcd minor fixesDavid Brownell
Three minor sl811-hcd fixes: - Elminate memory leak on one (rare) disable/shutdown path. - For periodic transfers that don't need to be scheduled, update urb->start_frame to represent the transfer phase correctly. - Report the (single) port as removable, by default. Since no drivers yet use start_frame or that part of the hub descriptor, only that leak is likely to ever matter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> drivers/usb/host/sl811-hcd.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
2005-09-22[PATCH] USB: fix pxa2xx_udc compile warningsRichard Purdie
This patch fixes several types in the PXA25x udc driver and hence fixes several compiler warnings. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: ftdi_sio: allow baud rate to be changed without raising RTS and DTRPeter Favrholdt
I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for a bar code reader). Detecting the baudrate of the serial-IR involves keeping DTR low while changing baudrate. This works using normal 16550A serial ports as well as the FTDI driver version 1.4.0 (Linux 2.6.8) but stopped working with the change to "ensure RTS and DTR are raised when changing baudrate" introduced in version 1.4.1 (Linux 2.6.9). The attached patch fixes this, so RTS and DTR is only raised when changing baudrate iff the previous baudrate was B0. Signed-off-by: Peter Favrholdt <pfavr@how.dk> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: more device IDs for Option card driverMatthias Urlichs
Added support for HUAWEI E600 and Audiovox AirCard User reports say that these devices work without driver modification. Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] ub: fix burning cdsPete Zaitcev
This patch fixes a few problems with ub and cleans up a couple of things: - Bump UB_MAX_REQ_SG, this allows to burn CDs - Drop initialization of urb.transfer_flags, now that URB_UNLINK_ASYNC is gone - Add forgotten processing of stalls at GetMaxLUN - Remove a few more P3-tagged printks whose time has come - Correct comment about ZIP-100 Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> drivers/block/ub.c | 53 +++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 26 deletions(-)
2005-09-22[PATCH] PCI Hotplug: Fix buffer overrun in rpadlpar_sysfs.cLinda Xie
Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] fix drivers/pci/probe.c warningAmos Waterland
This function expects an unsigned 32-bit type as its third argument: static u32 pci_size(u32 base, u32 maxbase, u32 mask) However, given these definitions: #define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) #define PCI_ROM_ADDRESS_MASK (~0x7ffUL) these two calls in drivers/pci/probe.c are problematic for architectures for which a UL is not equivalent to a u32: sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK); sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK); Hence the below compile warning when building for ARCH=ppc64: drivers/pci/probe.c: In function `pci_read_bases': /.../probe.c:168: warning: large integer implicitly truncated to unsigned type /.../probe.c:218: warning: large integer implicitly truncated to unsigned type Here is a simple fix. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] PCI: convert kcalloc to kzallocPekka Enberg
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] PCI: remove unused "scratch"Bjorn Helgaas
Unused variable. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>