aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7610): em28xx: Select reg wait time based on chip IDMauro Carvalho Chehab
This is more conservative than just removing the msleep() from em28xx_write_regs_req(), since some old hardware may still need it. So, it will remove the sleep time only for those chips where this removal were tested. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7609): em28xx-core: speed-up firmware loadDevin Heitmueller
em28xx-core.c: - Remove sleep in i2c message routine which slows down i2c by a factor 10x. Load time for BASE firmware went from 13s to .973s Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7608): em28xx-dvb: Some cleanups and fixesDevin Heitmueller
em28xx-dvb.c: - Remove unneeded xc3028_ctrl structure. The driver automatically preserves the previous value tuner-xc2028.c: - Make the return type for xc2028_get_reg signed, since all of the callers are looking for "< 0" to detect errors. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7607): CodingStyle fixesDouglas Schilling Landgraf
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7606): em28xx-dvb: Program GPO as wellMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7605): tuner-xc3028: Avoids too much firmware reloadsMauro Carvalho Chehab
xc3028_sleep function is being used with a different meaning. This should be called only before doing S1/S3 sleep. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7604): em28xx-dvb: Fix analog modeMauro Carvalho Chehab
The analog entries are wrong. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7603): em28xx-dvb: don't use videobuf-dvbAidan Thornton
Modifies em28xx-dvb not to use videobuf-dvb, but instead to include the code for registering dvb devices locally and use the URB management code in the em28xx driver directly. DVB data streaming should now work. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7602): em28xx: generalise URB setup codeAidan Thornton
Move the URB setup and management code to em28xx-core.c and generalise it slighlty so that the DVB code can use it. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7601): em28xx-dvb: add support for the HVR-900Aidan Thornton
Adds the correct GPIOs and demod attach code for the HVR-900 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7600): em28xx: Sets frequency when changing to analog modeMauro Carvalho Chehab
This will make tuner-xc2028 to change to analog, if needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fhMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7598): em28xx: several fixes on gpio programmingDevin Heitmueller
em28xx-cards.c: - Fix reversed val/rst values in both analog_gpio and digital_gpio vectors - Fix crash that would was occurring during every analog startup while looping over gpio_ctl - Remove what appears to be a redundant setting of gpio_ctl->val - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC scanning from working) em28xx-dvb.c: - Tuner should be in digital mode when issuing the reset - Add copyright - Change struct definition (corresponds to fix in em28xx-cards.c for gpio_ctl looping) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7597): em28xx: share the same xc3028 setup for analog and digital modesMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan Thornton" <makosoft@googlemail.com> for pointing some errors with the previous scenario. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7596): em28xx-dvb: Add support for HVR950Mauro Carvalho Chehab
This patch adds DVB support for Hauppauge HVR950. Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7595): Improve generic support for setting gpio valuesMauro Carvalho Chehab
em28xx based devices with xc3028 may require some specific gpio values. This patch adds a generic handling for such values. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7594): em28xx: Fix KconfigMauro Carvalho Chehab
Some devices have msp3400 audio decoder chip. Selects it, if em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7593): em28xx: add a module to handle dvbMauro Carvalho Chehab
This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and saa7134-dvb. This code currently loads and unloads successfully. However, some changes are needed to properly support the mpeg streams and to setup em28xx to work on DVB mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7591): drivers/media/video: use time_before, time_before_eq, etcJulia Lawall
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7590): ir-common: Adds 3 missing IR keys for FlyVIdeo2000Ivan Bobyr
The patch extends the default keymap of FlyVIdeo2000 IR remote control so that this remote may also serve movie & music players in a better way. I bought a SAA7130 TV tuner with a remote control having 3 additional button as the default layout, exactly as: 1) labeled "<<<" : key code 0x19, may be used as "backward"in MPlayer,XMMS etc 2) labeled ">>>" : key code 0x1f, may be used as "forward"... 3) not labeled : key code 0x0a, may be used as "pause"... Once have added these code definitions to the kernel, me got all these operations available for viewing movies & listening music. Signed-off-by : Ivan Bobyr <brefi@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7589): ibmcam: improve support for the IBM PC Camera ProDavid Hilvert
This patch modifies Dmitri's original ibmcam driver for Linux to improve support for the IBM PC Camera Pro. It may also offer improved support for other models classified by the driver as 'Model 3', such as the IBM PC Camera Pro Max. See http://auricle.dyndns.org/xvp610/ Signed-off-by: David Hilvert <dhilvert@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7584): Fix build that occurs when CONFIG_VIDEO_PMS=y and ↵Mauro Carvalho Chehab
VIDEO_V4L2_COMMON=m This patch removes zoran checks for VIDEO_V4L2, since this API is always present, when V4L is selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7582): proc: switch /proc/driver/radio-typhoon to seq_file interfaceAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7580): Fix concurrent read from /proc/videocodecsAlexey Dobriyan
Observation one: ->write_proc and ->data assignments aren't needed. Removed. Observation two: codecs lists are unprotected. Patch doesn't fix this. Observation three: /proc/videocodecs printout is done to temporary _global_ buffer which is freed in between. Consequently, two users hitting this file can screwup each other. Steps to reproduce: modprobe videocodec while true; do cat /proc/videocodecs &>/dev/null; done & while true; do cat /proc/videocodecs &>/dev/null; done & The fix is switching to seq_files, this removes code, especially some line-length "logic". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7579): bttv: Fix memory leak in radio_releaseRobert Fitzsimons
Fix the leak of the bttv_fh structure allocated in radio_open which was introduced by commit 5cd3955cb8adfc1edf481e9e1cb2289db50ccacb. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7575a): Revert changeset 4c3b01f71181a52ab7735a7c52b1aa2232826075Mauro Carvalho Chehab
Due to the patch order change, pvrusb2 were broken. So, changeset 4c3b01f71181a52ab7735a7c52b1aa2232826075 were applied at mainstream to fix. After the pvrusb2 changes, this patch is no longer required and should be reverted. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7569): Added support for SkyStar2 rev2.7 and ITD1000 DVB-S tunerPatrick Boettcher
This patches adds support for the SkyStar2 rev2.7 with the PN1010/ITD1000 Frontend. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7471): SkyStar2: preparing support for the rev2.8Patrick Boettcher
Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7575): mt312: add attach-time setting to invert lnb-voltageMatthias Schwarzott
Add a setting to config struct for inversion of lnb-voltage. Needed for support of Avermedia A700 cards. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7574): mt312: Add support for zl10313 demodMatthias Schwarzott
Add zl10313 support to mt312 driver. zl10313 uses 10.111MHz xtal. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7573): mt312: Supports different xtal frequenciesMatthias Schwarzott
Do not hardcode xtal frequency but allow different values for future zl10313 support. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7572): mt312: Fix diseqcMatthias Schwarzott
Correct the frequency of the emitted diseqc signal to 22kHz. Adds sleep(100) to wait for message to be transmitted. For now the only user of mt312 is b2c2-flexcop, and it does overwrite all diseqc related functions with own code. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7571): mt312: Cleanup buffer variables of read/write functionsMatthias Schwarzott
Change type of buffer variables from void* to u8* to save some casts. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7568): Support for DVB-S demod PN1010 (clone of S5H1420) addedPatrick Boettcher
This device is a clone of the PN1010 used by SkyStar2 rev2.7 . This patch adds support for the flexcop-device and makes the driver look a little bit nicer. It needs to be checked whether the driver is still ok for the budget-cards. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7567): em28xx: Some cleanupsMauro Carvalho Chehab
Removes some fields from data structs. There are some fields that are just caching some calculus for buffer size. The calculus were moved to the places it were needed and the now unused fields were removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7566): videobuf-dvb: allow its usage with videobuf-vmallocMauro Carvalho Chehab
videobuf-dvb were still using a function that were videobuf-dma-sg dependent. This patch creates a generic handler for this function. This way, videobuf-dvb can now work with all videobuf implementations. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7565): em28xx: fix buffer underrun handlingAidan Thornton
This patch fixes three related issues and a fourth trivial one: - Use buffers even if no-one's currently waiting for them (fixes underrun issues); - Don't return incomplete/mangled frames at the start of streaming and in the case of buffer underruns; - Fix an issue which could cause the driver to write to a buffer that's been freed after videobuf_queue_cancel is called (exposed by the previous two fixes - for some reason, ignoring buffers that weren't being waited on worked around the issue); - Fix a bug which could cause only one field to be filled in the first buffer (or first few buffers) after streaming is started. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7564): em28xx: Some fixes to display logicMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7563): em28xx: Add missing checksMauro Carvalho Chehab
There are some cases where nobody is waiting for a buffer. Due to the lack of check, if you try to abort the userspace app, machine were hanging, since IRQ were trying to use a buffer that were disallocated. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7562): videobuf: Require spinlocks for all videobuf usersBrandon Philips
A spinlock is necessary for queue_cancel to work with every driver in the tree. Otherwise a race exists between IRQ handlers removing buffers from the queue and queue_cancel invalidating the queue. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7561): videobuf-vmalloc: stop streaming before unmapMauro Carvalho Chehab
Before the patch, there were a risk of freeing and unmapping userspace memory, while there were pending requests. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7560): videodev: Some printk fixesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7559): em28xx: Fills the entire buffer, before getting another oneMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7558): videobuf: Improve command output for debug purposesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7557): em28xx: honour video_debug modprobe parameterMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7556): em28xx: fix locking on vidioc_s_fmt_capAidan Thornton
Currently, vidioc_s_fmt_cap is allowed even if streaming is running on some other fh. This is likely to cause issues. Block use of vidioc_s_fmt_cap if someone else has claimed access to the device. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7555): em28xx: remove timeoutMauro Carvalho Chehab
It seems that we don't need a timeout for em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7554): videobuf-dma-sg: Remove unused flagMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7553): videobuf-vmalloc: fix STREAMOFF/STREAMONMauro Carvalho Chehab
There were a small bug on videobuf-vmalloc that were preventing STREAMOFF to work. The issue is that vmalloc'ed mmaped memory should only be freed after being sure that there aren't any mmap usage. Otherwise, the memory remap will stop working, and the userspace won't receive any frames. This bug were affecting some userspace applications, like tvtime. After this patch, tvtime started to work again with the drivers that use videobuf-vmalloc. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7552): videbuf-vmalloc: Corrects mmap codeMauro Carvalho Chehab
There were some bugs on videobuf-vmalloc. Basically, remap were called with a wrong parameter. Due to that, a later remap were needed, generating the need of some hacks on videobuf-vmalloc and videobuf-core. This patch fixes the remap and removes the hacks. TODO: - V4L2_MEMORY_USERPTR is not implemented yet. This method should be properly implemented, in order to work with a few userspace applications. - The driver also doesn't implement V4L2_MEMORY_OVERLAY. This method is used only by a few applications, and are becaming obsolete, due to the increment of cpu performance. So, most apps prefer to retrieve data to an internal buffer, doing some processing like de-interlacing. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>