aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-10[IPoIB] no need to set skb->dev right before freeing skbRoland Dreier
For cut-and-paste reasons, the IPoIB driver was setting skb->dev right before calling dev_kfree_skb_any(). Get rid of this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] umad: avoid potential deadlock when unregistering MAD agentsRoland Dreier
ib_unregister_mad_agent() completes all pending MAD sends and waits for the agent's send_handler routine to return. umad's send_handler() calls queue_packet(), which does down_read() on the port mutex to look up the agent ID. This means that the port mutex cannot be held for writing while calling ib_unregister_mad_agent(), or else it will deadlock. This patch fixes all the calls to ib_unregister_mad_agent() in the umad module to avoid this deadlock. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IPoIB] add path record information in debugfsRoland Dreier
Add ibX_path files to debugfs that contain information about the IPoIB path cache. IPoIB ARP only gives GIDs, which the IPoIB driver must resolve to real IB paths through the ib_sa module. For debugging, when the ARP table looks OK but traffic isn't flowing, it's useful to be able to see if the resolution from GID to path worked. Also clean up the formatting of the existing _mcg debugfs files. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-06[IB] umad: two small fixesMichael S. Tsirkin
Two small fixes for the umad module: - set kobject name for issm device properly - in ib_umad_add_one(), s is subtracted from the index i when initializing ports, so s should be subtracted from the index when freeing ports in the error path as well. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-04[IB] mthca: report page size capabilityJack Morgenstein
Report the device's real page size capability in mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-04[PATCH] nvidiafb: Geforce 7800 series support addedCalin A. Culianu
This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04Merge branch 'srp' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-04Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-04Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-04[USB]: Make early handoff a final fixup instead of a header one.David S. Miller
At header fixup time, it is not yet legal to ioremap() PCI device registers, yet that is what this quirk code needs to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-04Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-04[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfromRussell King
No longer maintained
2005-11-04[PATCH] ARM: Reverted 2921/1: Support for the RTC / nvram on the Comdial MP1000Russell King
No longer maintained
2005-11-04[PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the ↵Russell King
Comdial MP1000 No longer maintained
2005-11-03[IB] mthca: check P_Key index in modify QPJack Morgenstein
Make sure that the P_Key index passed into mthca_modify_qp() is within the device's P_Key table. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-03[SERIAL] 8250_early.c passing 0 instead of NULLBen Dooks
Fix sparse warning about passing `0` to simple_strtoul() Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-03[IB] umad: fix hot remove of IB devicesRoland Dreier
Fix hotplug of devices for ib_umad module: when a device goes away, kill off all MAD agents for open files associated with that device, and make sure that the device is not touched again after ib_umad returns from its remove_one function. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IB] mthca: fix format of FW versionRoland Dreier
Mellanox has decided that the components of the firmware version are really meant to be displayed in decimal, e.g. 0x000400070190 is version 4.7.400. Change the format we use from "%x.%x.%x" to "%d.%d.%d" to match this convention. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IPoIB] don't compile debug code if debugging isn't enabledRoland Dreier
Don't build ipoib_mcast_iter_ functions if CONFIG_INFINIBAND_IPOIB_DEBUG is not enabled -- their only callers will not be built either. Also move the prototype for ipoib_open() to ipoib.h to fix a sparse warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-11-02IB: Add SCSI RDMA Protocol (SRP) initiatorRoland Dreier
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator. This driver is used to talk talk to InfiniBand SRP targets (storage devices). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IPoIB] remove unneeded initializations to 0Roland Dreier
Shrink our source and .text a little by removing a few assignments of NULL and 0 to memory that is already cleared as part of the allocation. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02Merge git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
2005-11-02[IB] kzalloc() conversionsRoland Dreier
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35 source lines and about 500 bytes of text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[ARM] AMBA CLCD driver can drive PL110 and PL111 primecellsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02Merge Paulus' treeStephen Rothwell
2005-11-01[PATCH] blk: fix dangling pointer access in __elv_add_requestTejun Heo
cfq's add_req_fn callback may invoke q->request_fn directly and depending on low-level driver used and timing, a queued request may be finished & deallocated before add_req_fn callback returns. So, __elv_add_request must not access rq after it's passed to add_req_fn callback. This patch moves rq_mergeable test above add_req_fn(). This may result in q->last_merge pointing to REQ_NOMERGE request if add_req_fn callback sets it but as RQ_NOMERGE is checked again when blk layer actually tries to merge requests, this does not cause any problem. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] ibmveth fix panic in initial replenish cycleSantiago Leon
This patch fixes a panic in the current tree caused by a race condition between the initial replenish cycle and the rx processing of the first packets trying to replenish the buffers. Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] missing platform_device.h includesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01Merge master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds
Manual fixups for some clashes due to re-indenting.
2005-11-01[PATCH] tlclk build fixAndrew Morton
drivers/char/tlclk.c: In function `tlclk_init': drivers/char/tlclk.c:775: warning: implicit declaration of function `platform_device_register_simple' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] TPM compile fixChris Wright
CC drivers/char/tpm/tpm_nsc.o drivers/char/tpm/tpm_nsc.c:277: error: `platform_bus_type' undeclared here (not in a function) ... CC drivers/char/tpm/tpm_atmel.o drivers/char/tpm/tpm_atmel.c:175: error: `platform_bus_type' undeclared here (not in a function) Make sure to include proper headers. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-01Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-11-02Merge iSeries include file moveStephen Rothwell
2005-11-02Merge ../linux-2.6Paul Mackerras
2005-11-02merge filename and modify references to iseries/vio.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iSeries/mf.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02powerpc: exclude powerbook sleep code with CONFIG_PPC64 and CONFIG_PMPaul Mackerras
We were getting powerbook sleep code included, and giving compile errors, with CONFIG_PM=y on a 64-bit build. This excludes that code so the kernel will compile. One day BenH will implement on sleep on the G5... Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/hv_types.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_lp_event.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify reference to iseries/hv_lp_config.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_call_event.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-01[ARM] 3079/1: Fix typo in i2c-iop3xx.c (invalid pointer passed to ↵Dan Williams
release_mem_region) Patch from Dan Williams * If request_irq fails then a call to release_mem_region will be made with an invalid pointer. * Two formatting fixes Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01[WATCHDOG] adds device_driver .owner fieldWim Van Sebroeck
Initialise the .owner field of the device driver with the module that owns it, for easier tracking of device driver ownership. (probably also better for sysfs...) Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2005-11-01[WATCHDOG] pcwd_pci.c update commentsWim Van Sebroeck
update copyright + update bells and whistles driver for v2.6 Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2005-11-01[WATCHDOG] w83627hf_wdt trivial typoPozsar Balazs
The most trivial typo fix in the world. Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu> Signed-off-by: Pádraig Brady <P@draigBrady.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2005-11-01[WATCHDOG] s3c2410 wdt - add .owner fieldBen Dooks
Initialise the .owner field of the device driver with the module that owns it, for easier tracking of device driver ownership. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2005-11-01[BLOCK] aoe: update for combined io statisticsJens Axboe
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-01[BLOCK] Unify the seperate read/write io stat fields into arraysJens Axboe
Instead of having ->read_sectors and ->write_sectors, combine the two into ->sectors[2] and similar for the other fields. This saves a branch several places in the io path, since we don't have to care for what the actual io direction is. On my x86-64 box, that's 200 bytes less text in just the core (not counting the various drivers). Signed-off-by: Jens Axboe <axboe@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 14:48:39 +0000