aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-21fcoe: Add runtime debug logging with module parameter debug_loggingRobert Love
This patch converts all FC_DBG statements to use new runtime tunable debug macros. The fcoe.ko module now has a debug_logging module parameter. fcoe_debug_logging is an unsigned integer representing a bitmask of all available logging levels. Currently only two logging levels are supported- bit LSB 0 = general fcoe logging 1 = netdevice related logging This patch also attempts to clean up some debug statement formatting so it's more readable. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21scsi_debug: Add support for physical block exponent and alignmentMartin K. Petersen
This patch adds support for setting the physical block exponent and lowest aligned LBA in the READ CAPACITY(16) response. The B0 VPD page is adjusted accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21cnic: add NETDEV_1000 and NETDEVICES to Kconfig selectRandy Dunlap
NETDEVICES + NETDEV_1000 need to be enabled so that kconfig will check those branches for selects and enforce "select UIO" under CNIC. Otherwise the build fails with: ERROR: "uio_unregister_device" [drivers/net/cnic.ko] undefined! ERROR: "uio_event_notify" [drivers/net/cnic.ko] undefined! ERROR: "__uio_register_device" [drivers/net/cnic.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21cnic: Fix __symbol_get() build error.Michael Chan
Ingo molnar <mingo@elte.hu> reported the error drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’ when CONFIG_MODULES is not defined. Fix by using symbol_get() instead. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21Revert "[SCSI] cnic: fix error: implicit declaration of function ↵James Bottomley
‘__symbol_get’" This reverts commit bc3bf8fd330ce981ce632a1a4a283eee46838f32. All the commit did was add a second #include of <linux/module.h> which is the wrong fix. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21ipr: differentiate pci-x and pci-e based adaptersWayne Boyer
MSI has only been tested on and known to work with PCI-E based adapters. This patch adds a field to struct ipr_chip_t to indicate which type of interrupt to use based on what is known about the chip. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21ipr: add test for MSI interrupt supportWayne Boyer
The return value from pci_enable_msi() can not always be trusted. This patch adds code to generate an interrupt after MSI has been enabled and tests whether or not we can receive and process it. If the tests fails, then fall back to LSI. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21scsi_transport_spi: Blacklist Ultrium-3 tape for IU transfersJames Bottomley
There have been several bug reports which identified the Ultrium-3 tape as just hanging up on the bus during certain types of IU transfer. The identified culpret is type 0x02 (MULTIPLE COMMAND) transfers. The only way to prevent this tape wedging is to prevent it from using IU transfers at all. So this patch uses the exported blacklist matching technology to recognise the drive and force it not to use IU transfers. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21scsi_transport_spi: use spi target settings instead of inquiry data for DVJames Bottomley
Right at the moment, we carefully set up the spi_support_xx in the device configuration routines, but then we never actually use the results: we rely on the inquiry strings. If we're going to allow overrides to the inquiry data, we have to rely on our own internal settings. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21enhance device info matching for multiple tablesJames Bottomley
The current scsi_devinfo.c matching routines use a single table for the global blacklist. However, we're developing a need to blacklist from specific transports too (notably some tape drives using SPI which don't respond well to high speed protocols). Instead of developing separate blacklist matching for each transport class needing it, enhance the current list matching to permit multiple lists. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Update version number to 8.03.01-k4.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Correct (again) overflow during dump-processing on large-memory ↵Andrew Vasquez
ISP23xx parts. Commit 7b867cf76fbcc8d77867cbec6f509f71dce8a98f ([SCSI] qla2xxx: Refactor qla data structures) inadvertently reverted e792121ec85672c1fa48f79d13986a3f4f56c590 ([SCSI] qla2xxx: Correct overflow during dump-processing on large-memory ISP23xx parts.). Cc: stable@kernel.org Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Limit querying to supported mailbox-registers while reading FW state.Andrew Vasquez
Pre-ISP24xx chips have dedicated uses for mailbox 4 and 5 which software should typically not query nor update. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Correct iiDMA-update calling conventions.Harish Zunjarrao
* To set iiDMA speeds for ISP81XX, bits 5-0 are used whereas for other older ISPs bits 2-0 are used. * Pass proper VP index Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21qla2xxx: Fixed a bug in number of response queue creation logic.Anirban Chakraborty
Cc: stable@kernel.org Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21fix race that can give duplicate host numberJoe Eykholt
Just once, two fcoe instances got the same host number from scsi_add_host(). Use atomic_t and atomic_inc_return() to get next host number. Subtract 1, so that scsi_host still starts with 0. [jejb: added comment about unusual subtraction] Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21scsi_transport_sas: needs to call blk_end_request_all for SMP requestsFUJITA Tomonori
We need to call blk_end_request_all to complete SMP requests properly. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21libiscsi: add conn and scsi eh log debug flagsErez Zilber
Allow the user to control the debug logs in libiscsi. We will now have a module param for connection, session & error handling. [Mike Christie - Fixed up to compile on current code and added missing ISCSI_DBG_EH conversions] Signed-off-by: Erez Zilber <erezzi.list@gmail.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21iscsi_tcp: propogate EAGAIN from sendpage to libiscsiMike Christie
The net layer might return -EAGAIN because it could not get space/mem within the sock sndtimeo or becuase the tcp/ip connection was down. For the latter we do not want to retry because the conn/session should just be shutdown and restarted. libiscsi knows the state of the session recovery so propogate this error to that layer. It will either do iscsi recovery or have us retry the operation. Right now if we have partially sent a pdu we would always retry the IO xmit slowing down recovery. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21libiscsi: don't run scsi eh if iscsi task is making progressMike Christie
If we are sending or receiving data for the task successfully do not run the scsi eh, because we know the task is making progress. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21cxgb3i: suppot of different kernel page sizesKaren Xie
The default kernel pages supported are 4K, 8K, 16K, and 64K. Re-calculate entries if PAGE_SIZE is not one of the defaults. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21cxgb3i: use kref to track ddp usageKaren Xie
The iscsi ddp functionality could be used by multiple iscsi entities, add a refcnt to keep track of it, so we would not release it pre-maturely. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21sd: Block limits VPD supportMartin K. Petersen
Query the block limits VPD page and adjust queue minimum and optimal I/O sizes. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21sd: Detect non-rotational devicesMartin K. Petersen
Detect non-rotational devices and set the queue flag accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21sd: Physical block size and alignment supportMartin K. Petersen
Extract physical block size and lowest aligned LBA from READ CAPACITY(16) response and adjust queue parameters. Report physical block size and alignment when applicable. [jejb: fix up trailing whitespace] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-20Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (24 commits) agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses agp: add user mapping support to ATI AGP bridge. drm/i915: enable GEM on PAE. drm/radeon: fix unused variables warning agp: switch AGP to use page array instead of unsigned long array agpgart: detected ALi M???? chipset with M1621 drm/radeon: command stream checker for r3xx-r5xx hardware drm/radeon: Fully initialize LVDS info also when we can't get it from the ROM. radeon: Fix CP byte order on big endian architectures with KMS. agp/uninorth: Handle user memory types. drm/ttm: Add some powerpc cache flush code. radeon: Enable modesetting on non-x86. drm/radeon: Respect AGP cant_use_aperture flag. drm: EDID endianness fixes. drm/radeon: this VRAM vs aperture test is wrong, just remove it. drm/ttm: fix an error path to exit function correctly drm: Apply "Memory fragmentation from lost alignment blocks" ttm: Return -ERESTART when a signal interrupts bo eviction. drm: Remove memory debugging infrastructure. drm/i915: Clear fence register on tiling stride change. ...
2009-06-20Merge branch 'for-2.6.31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits) ide-cd: prevent null pointer deref via cdrom_newpc_intr ide: BUG() on unknown requests ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler ide: do not access ide_drive_t 'drive_data' field directly sl82c105: implement test_irq() method siimage: implement test_irq() method pdc202xx_old: implement test_irq() method (take 2) cmd64x: implement test_irq() method cmd640: implement test_irq() method ide: move ack_intr() method into 'struct ide_port_ops' (take 2) ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2) siimage: use ide_dma_test_irq() (take 2) cmd64x: implement clear_irq() method (take 2) ide: call clear_irq() method in ide_timer_expiry() sgiioc4: coding style cleanup ide: don't enable IORDY at a probe time ide: IORDY handling fixes ata: add ata_id_pio_need_iordy() helper (v2) ide-tape: fix build issue ide: unify interrupt reason checking ...
2009-06-20ide-cd: prevent null pointer deref via cdrom_newpc_intrRainer Weikusat
With 2.6.30, the error handling code in cdrom_newpc_intr was changed to deal with partial request failures by normally completing the 'good' parts of a request and only 'error' the last (and presumably, incompletely transferred) bio associated with a particular request. In order to do this, ide_complete_rq is called over ide_cd_error_cmd() to partially complete the rq. The block layer does partial completion only for requests with bio's and if the rq doesn't have one (eg 'GPCMD_READ_DISC_INFO') the request is completed as a whole and the drive->hwif->rq pointer set to NULL afterwards. When calling ide_complete_rq again to report the error, this null pointer is derefenced, resulting in a kernel crash. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13399. Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-19Input: add driver for Synaptics I2C touchpadMike Rapoport
This driver supports Synaptics I2C touchpad controller on eXeda mobile device. Unfortunaltely it only works in relative mode and thus is not comaptible with Xorg Synaptics driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19Input: synaptics - add support for reporting x/y resolutionTero Saarni
Synaptics uses anisotropic coordinate system. On some wide touchpads vertical resolution can be twice as high as horizontal which causes unequal sensitivity on x/y directions. Add support for reading the resolution with EVIOCGABS ioctl. Signed-off-by: Tero Saarni <tero.saarni@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-20agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addressesPierre Willenbrock
Otherwise, the high bits to be stuffed in the unused lower bits of the page address are lost. Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (342 commits) Staging: comedi: fix build errors Staging: udlfb: update to version 0.2.3 Staging: udlfb: fix some sparse warnings. Staging: udlfb: clean up checkpatch warnings in udlfb.c Staging: udlfb: clean up checkpatch warnings in udlfb.h Staging: udlfb: add udlfb driver to build Staging: add udlfb driver Staging: pata_rdc: remove pointless comments Staging: pata_rdc: remove DRIVER macros Staging: pata_rdc: remove dbgprintf macro Staging: pata_rdc: remove broken flag Staging: pata_rdc: fix build warnings Staging: pata_rdc: use PCI_DEVICE Staging: pata_rdc: remove function prototypes Staging: pata_rdc: coding style fixes Staging: pata_rdc: convert code to work in 2.6.29 Staging: pata_rdc: add driver to the build system Staging: add pata_rdc driver Staging: remove obsolete serqt_usb driver Staging: serqt_usb2 add the driver to the build ...
2009-06-19Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: New macro to initialize i2c address lists on the fly i2c: Don't advertise i2c functions when not available i2c: Use rwsem instead of mutex for board info i2c: Add a sysfs interface to instantiate devices i2c: Limit core locking to the necessary sections i2c: Kill the redundant client list i2c: Kill is_newstyle_driver i2c: Merge i2c_attach_client into i2c_new_device i2c: Drop i2c_probe function i2c: Get rid of the legacy binding model i2c: Kill client_register and client_unregister methods
2009-06-19Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Fix kernel-doc parameter name typo in blk-settings.c: block: rename CONFIG_LBD to CONFIG_LBDAF block: Fix bounce_pfn setting hd: stop defining MAJOR_NR
2009-06-19Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits) powerpc/5121: make clock debug output more readable powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback fbdev/xilinxfb: Fix improper casting and tighen up probe path usb/ps3: Add missing annotations powerpc: Add memory clobber to mtspr() powerpc: Fix invalid construct in our CPU selection Kconfig ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access powerpc: Add configurable -Werror for arch/powerpc of_serial: Add UPF_FIXED_TYPE flag drivers/hvc: Add missing __devexit_p() net/ps3: gelic - Add missing annotations powerpc: Introduce macro spin_event_timeout() powerpc/warp: Fix ISA_DMA_THRESHOLD default powerpc/bootwrapper: Custom build options for XPedite52xx targets powerpc/85xx: Add defconfig for X-ES MPC85xx boards powerpc/85xx: Add dts files for X-ES MPC85xx boards powerpc/85xx: Add platform support for X-ES MPC85xx boards 83xx: add support for the kmeter1 board. ...
2009-06-19fbdev: do not allow VESA modes without compiled-in driversKrzysztof Helt
Do not accept VESA modes by the "vga=" kernel parameter if there is no frame buffer driver compiled-in to handle it. Also, there is a comment added to the Kconfig description after Werner Lemberg's suggestion Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13249 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reported-by: Werner Lemberg <wl@gnu.org> Cc: Michal Januszewski <spock@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19convert some DMA_nnBIT_MASK() callersAndrew Morton
We're about to make DMA_nnBIT_MASK() emit `deprecated' warnings. Convert the remaining stragglers which are visible to the x86_64 build. Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Eric Moore <Eric.Moore@lsil.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Yi Zou <yi.zou@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19char: moxa, prevent opening unavailable portsDirk Eibach
In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. [akpm@linux-foundation.org: avoid multiple returns] Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19istallion: add missing __devexit markingMike Frysinger
The remove member of the pci_driver stli_pcidriver uses __devexit_p(), so the remove function itself should be marked with __devexit. Even more so considering the probe function is marked with __devinit. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19dtlk: off by one in {read,write}_tts()Roel Kluin
With a postfix increment retries is incremented beyond DTLK_MAX_RETRIES so the error message is not displayed correctly. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: James R. Van Zandt <jrv@vanzandt.mv.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19rtc: make rtc_update_irq callable with irqs enabledAtsushi Nemoto
The rtc_update_irq() might be called with irqs enabled, if a interrupt handler was registered without IRQF_DISABLED. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_lock/spin_unlock. Also update kerneldoc and drivers which do extra work to follow the current interface spec, as suggestted by David Brownell. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc8xxx: s/83xx/8xxx/gAnton Vorontsov
Since we renamed the file, we might want to rename the file internals too. Though we don't bother with changing platform driver name and platform module alias. The stuff is legacy and hopefully we'll remove it soon. Suggested-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: rename spi_83xx.c to spi_8xxx.cAnton Vorontsov
The driver handles MPC83xx, MPC85xx and MPC86xx SPI controllers, so rename the file for clarity. Suggested-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: remove dead codeAnton Vorontsov
This patch removes #if 0'ed code, and spi_mpc83xx->busy variable that is used by that dead snippet only. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: split mpc83xx_spi_work() into two routinesAnton Vorontsov
mpc83xx_spi_work() is quite large, with up to five indentation levels and is quite difficult to read. So, split the function in two parts: 1. mpc83xx_spi_work() now only traverse queued spi messages; 2. mpc83xx_spi_do_one_msg() only manages single messages. There should be no functional changes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: fix checkpatch issuesAnton Vorontsov
Checkpatch is spitting errors when seeing the rename patch, so fix the errors prior to moving. Following errors and warnings were fixed: WARNING: Use #include <linux/io.h> instead of <asm/io.h> #1027: FILE: drivers/spi/spi_mpc8xxx.c:37: +#include <asm/io.h> ERROR: "foo * bar" should be "foo *bar" #1111: FILE: drivers/spi/spi_mpc8xxx.c:121: +static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val) ERROR: "foo * bar" should be "foo *bar" #1116: FILE: drivers/spi/spi_mpc8xxx.c:126: +static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg) ERROR: "foo * bar" should be "foo *bar" #1125: FILE: drivers/spi/spi_mpc8xxx.c:135: + type * rx = mpc83xx_spi->rx; \ ERROR: "foo * bar" should be "foo *bar" #1135: FILE: drivers/spi/spi_mpc8xxx.c:145: + const type * tx = mpc83xx_spi->tx; \ WARNING: suspect code indent for conditional statements (16, 25) #1504: FILE: drivers/spi/spi_mpc8xxx.c:514: + while (((event = [...] + cpu_relax(); Following warnings were left over, since fixing them will hurt the readability. We'd better fix them by lowering the indentation level by splitting mpc83xx_spi_work function into two parts. WARNING: line over 80 characters #1371: FILE: drivers/spi/spi_mpc8xxx.c:381: + status = mpc83xx_spi_setup_transfer(spi, t); WARNING: line over 80 characters #1392: FILE: drivers/spi/spi_mpc8xxx.c:402: + mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE); Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: add small delay after asserting chip-select lineAnton Vorontsov
This is needed for some underlaying GPIO controllers that may be a bit slow, or if chip-select signal need some time to stabilize. For what it's worth, we already have the similar delay for chip-select de-assertion case. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: quieten down the "Requested speed is too low" messageAnton Vorontsov
When a platform is running at high frequencies it's not always possible to scale-down a frequency to a requested value, and using mmc_spi driver this leads to the following printk flood during card polling: ... mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use 520828 Hz instead. mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use 520828 Hz instead. ... Fix this by using WARN_ONCE(), it's better than the flood, and also better than turning dev_err() into dev_dbg(), since we actually want to warn that some things may not work correctly. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19spi_mpc83xx: handle other Freescale processorsAnton Vorontsov
With this patch we'll able to select spi_mpc83xx driver on the MPC86xx platforms. Let the driver depend on FSL_SOC, so we don't have to worry about Kconfig anymore. Also remove the "experimental" dependency, the driver has been tested to work on a various hardware, and surely not experimental anymore. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-01 11:50:11 +0000