aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-08[METH]: Fix MAC address handling.Thomas Bogendoerfer
meth didn't set a valid mac address during probing, but later during open. Newer kernel refuse to open device with 00:00:00:00:00:00 as mac address -> dead ethernet. This patch sets the mac address in the probe function and uses only the mac address from the netdevice struct when setting up the hardware. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NET]: Fix netx-eth.c compilation.Adrian Bunk
This was missed when commit e2ac455a18806b31c2d0da0a51d8740af5010b7a fixed the compile errors in drivers/net/netx-eth.c caused by commit 09f75cd7bf13720738e6a196cc0107ce9a5bd5a0. Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Fix potentially stuck TCP socket send queues.David S. Miller
It is possible for the TX ring to have packets sit in it for unbounded amounts of time. The only way to defer TX interrupts in the chip is to periodically set "mark" bits, when processing of a TX descriptor with the mark bit set is complete it triggers the interrupt for the TX queue's LDG. A consequence of this kind of scheme is that if packet flow suddenly stops, the remaining TX packets will just sit there. If this happens, since those packets could be charged to TCP socket send queues, such sockets could get stuck. The simplest solution is to divorce the socket ownership of the packet once the device takes the SKB, by using skb_orphan() in niu_start_xmit(). In hindsight, it would have been much nicer if the chip provided two interrupt sources for TX (like basically every other ethernet chip does). Namely, keep the "mark" bit, but also signal the LDG when the TX queue becomes completely empty. That way there is no need to have a deadlock breaker like this. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Missing ->last_rx update.David S. Miller
Noticed by Paul Lodridge. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NIU]: Fix slowpath interrupt handling.Matheos Worku
niu_slowpath_interrupt() expects values to be setup in lp->{v0,v1,v2} but they aren't. That's only done by niu_schedule_napi() which is done later in the interrupt path. If niu_rx_error() returns zero, and v0 is clear, hit the RX_DMA_CTL_STATE register with a RX_DMA_CTL_STAT_MEX. Only emit verbose RX error logs if a fatal channel or port error is signalled. Other cases will be recorded into statistics by niu_log_rxchan_errors(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08pl2303: Fix mode switching regressionAlan Cox
Cleaning out all the incorrect 'no change made' checks for termios settings showed up a problem with the PL2303. The hardware here seems to lose sync and bits if you tell it to make no changes. This shows up with a real world application. To fix this the driver check for meaningful hardware changes is restored but doing the tests correctly and as a tty layer function so it doesn't get duplicated wrongly everywhere if other drivers turn out to need it. Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Mirko Parthey <mirko.parthey@informatik.tu-chemnitz.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08dmi-id: fix for __you_cannot_kmalloc_that_much failureJean Delvare
gcc 3.2 has a hard time coping with the code in dmi_id_init(): drivers/built-in.o(.init.text+0x789e): In function `dmi_id_init': : undefined reference to `__you_cannot_kmalloc_that_much' make: *** [.tmp_vmlinux1] Error 1 Moving half of the code to a separate function seems to help. This is a no-op for gcc 4.1 which will successfully inline the code anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Dave Airlie <airlied@linux.ie> Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08md: fix data corruption when a degraded raid5 array is reshapedDan Williams
We currently do not wait for the block from the missing device to be computed from parity before copying data to the new stripe layout. The change in the raid6 code is not techincally needed as we don't delay data block recovery in the same way for raid6 yet. But making the change now is safer long-term. This bug exists in 2.6.23 and 2.6.24-rc Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08spi_bitbang: always grab lock with irqs blockedDavid Brownell
Fix a glitch reported by lockdep in the spi_bitbang code: it needs to consistently block IRQs when holding that spinlock. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/srp: Release transport before removing host IB/mlx4: Fix value of pkey_index in QP1 completions MAINTAINERS: Update Sean Hefty's email address
2008-01-08IB/srp: Release transport before removing hostDave Dillow
The documented call sequence for removing a host is to call the transport xxx_remove_host() prior to scsi_remove_host(). The SRP transport used to crash when that order was followed, but as it is now fixed, use the documented order. Signed-off-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-08IB/mlx4: Fix value of pkey_index in QP1 completionsDotan Barak
Fix the value of pkey_index in completions to get a valid value for GSI QPs. Without this fix, incoming GSI packets on port 2 get an invalid P_Key index in the completion, which prevents the MAD layer from sending back a response, which can make the second port of ConnectX HCAs completely useless. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-07V4L/DVB (6916): ivtv: udelay has to be changed *after* the eeprom was read, ↵Hans Verkuil
not before The eeprom decides which Hauppauge model it is, so the decision whether to use an udelay of 5 or 10 needs to be taken after reading the eeprom, not before. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-07V4L/DVB (6944a): Fix Regression VIDIOCGMBUF ioctl hangs on bttv driverGregor Jasny
Fix bttv VIDIOCGMBUF locking like done in commit 820eacd84cff23b76693f4be1e28feb672f4488f. Signed-off-by: Gregor Jasny <gjasny@web.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-06Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""Linus Torvalds
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d. It turns out that the bug that was triggered by that commit was apparently not actually triggered by that commit at all, and just the testing conditions had changed enough to make it appear to be due to it. The real problem seems to have been found by Peter Osterlund: "pktcdvd sets it [block device size] when opening the /dev/pktcdvd device, but when the drive is later opened as /dev/scd0, there is nothing that sets it back. (Btw, 40944 is possible if the disk is a CDRW that was formatted with "cdrwtool -m 10236".) The problem is that pktcdvd opens the cd device in non-blocking mode when pktsetup is run, and doesn't close it again until pktsetup -d is run. The effect is that if you meanwhile open the cd device, blkdev.c:do_open() doesn't call bd_set_size() because bdev->bd_openers is non-zero." In particular, to repeat the bug (regardless of whether commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not): " 1. Start with an empty drive. 2. pktsetup 0 /dev/scd0 3. Insert a CD containing an isofs filesystem. 4. mount /dev/pktcdvd/0 /mnt/tmp 5. umount /mnt/tmp 6. Press the eject button. 7. Insert a DVD containing a non-writable filesystem. 8. mount /dev/scd0 /mnt/tmp 9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null 10. If the DVD contains data beyond the physical size of a CD, you get I/O errors in the terminal, and dmesg reports lots of "attempt to access beyond end of device" errors." which in turn is because the nested open after the media change won't cause the size to be set properly (because the original open still holds the block device, and we only do the bd_set_size() when we don't have other people holding the device open). The proper fix for that is probably to just do something like bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9; in fs/block_dev.c:do_open() even for the cases where we're not the original opener (but *not* call bd_set_size(), since that will also change the block size of the device). Cc: Peter Osterlund <petero2@telia.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-04[SCSI] SRP transport: only remove our own entriesDave Dillow
The SCSI SRP transport class currently iterates over all children devices of the host that is being removed in srp_remove_host(). However, not all of those children were created by the SRP transport, and removing them will cause corruption and an oops when their creator tries to remove them. Signed-off-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-04[ISDN]: i4l: Fix DLE handling for i4l-audioMatthias Goebl
The DLE handling in i4l-audio seems to be broken. It produces spurious DLEs so asterisk 1.2.24 with chan_modem_i4l gets irritated, the error message is: "chan_modem_i4l.c:450 i4l_read: Value of escape is ^ (17)". -> There shouldn't be a DLE-^. If a spurious DLE-ETX occurs, the audio connection even dies. I use a "AVM Fritz!PCI" isdn card. I found two issues that only appear if ISDN_AUDIO_SKB_DLECOUNT(skb) > 0: - The loop in isdn_tty.c:isdn_tty_try_read() doesn't escape a DLE if it's the last character. - The loop in isdn_common.c:isdn_readbchan_tty() doesn't copy its characters, it only remembers the last one ("last = *p;"). Compare it with the loop in isdn_common.c:isdn_readbchan(), that *does* copy them ("*cp++ = *p;") correctly. The special handling of the "last" character made it more difficult. I compared it to linux-2.4.19: There was no "last"-handling and both loops did escape and copy all characters correctly. Signed-off-by: Matthias Goebl <matthias.goebl@goebl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[ISDN] i4l: 'NO CARRIER' message lost after ldisc flushMatthias Goebl
The ISDN tty layer doesn't produce a 'NO CARRIER' message after hangup. I suppose it broke when tty_buffer_flush() has been added to tty_ldisc_flush() in the commit below. For isdn_tty_modem_result(RESULT_NO_CARRIER..) the message inserted via isdn_tty_at_cout() -> tty_insert_flip_char() is flushed immediately by tty_ldisc_flush() -> tty_buffer_flush(). More annoyingly, the audio abort sequence DLE-ETX is also lost. This patch fixes only active audio connections, because I assume that nobody changes the line discipline for audio. For non-audio connections the problem remains. Maybe we can remove the tty_ldisc_flush() in isdn_tty_modem_result() at all because it's done at tty_close? On Mon, May 07, 2007 at 04:05:57PM -0500, Paul Fulghum wrote: > Flush the tty flip buffer when the line discipline > input queue is flushed, including the user call > tcflush(TCIFLUSH/TCIOFLUSH). This prevents unexpected > stale data after a user application calls tcflush(). > > Cc: Alan Cox <alan@lxorguk.org.uk> > Cc: Antonino Ingargiola <tritemio@gmail.com> > Signed-off-by: Paul Fulghum <paulkf@microgate.com> > > --- a/drivers/char/tty_io.c 2007-05-04 05:46:55.000000000 -0500 > +++ b/drivers/char/tty_io.c 2007-05-05 03:23:46.000000000 -0500 > @@ -1240,6 +1263,7 @@ void tty_ldisc_flush(struct tty_struct * > ld->flush_buffer(tty); > tty_ldisc_deref(ld); > } > + tty_buffer_flush(tty); [..] Signed-off-by: Matthias Goebl <matthias.goebl@goebl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[CONNECTOR]: Return proper error code in cn_call_callback()Li Zefan
Error code should be set to EINVAL instead of ENODEV if !queue_work(). There's another call of queue_work() which may set err to EINVAL. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[CASSINI]: Bump driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[CASSINI]: Fix two obvious NAPI bugs.David S. Miller
1) close should do napi_disable() not napi_enable 2) remove unused local var 'todo' Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[CASSINI]: Set skb->truesize properly on receive packets.David S. Miller
skb->truesize was not being incremented at all to reflect the page based data added to RX SKBs. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[CASSINI]: Program parent Intel31154 bridge when necessary.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-04[CASSINI]: Revert 'dont touch page_count'.David S. Miller
This reverts changeset fa4f0774d7c6cccb4d1fda76b91dd8eddcb2dd6a ([CASSINI]: dont touch page_count) because it breaks the driver. The local page counting added by this changeset did not account for the asynchronous page count changes done by kfree_skb() and friends. The change adds extra atomics and on top of it all appears to be totally unnecessary as well. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Nick Piggin <npiggin@suse.de>
2008-01-04[CASSINI]: Fix endianness bug.Al Viro
Here's proposed fix for RX checksum handling in cassini; it affects little-endian working with half-duplex gigabit, but obviously needs testing on big-endian too. The problem is, we need to convert checksum to fixed-endian *before* correcting for (unstripped) FCS. On big-endian it won't matter (conversion is no-op), on little-endian it will, but only if FCS is not stripped by hardware; i.e. in half-duplex gigabit mode when ->crc_size is set. cassini.c part is that fix, cassini.h one consists of trivial endianness annotations. With that applied the sucker is endian-clean, according to sparse. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/srp: Fix list corruption/oops on module reload
2008-01-03Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (w83627ehf) Be more careful when changing VID input level
2008-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_sysfs: restore prep_fn when ULD is removed
2008-01-03IB/srp: Fix list corruption/oops on module reloadDavid Dillow
Add a missing call to srp_remove_host() in srp_remove_one() so that we don't leak SRP transport class list entries. Tested-by: David Dillow <dillowda@ornl.gov> Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-03hwmon: (w83627ehf) Be more careful when changing VID input levelJean Delvare
The VID input level change has been reported to cause trouble. Be more careful in this respect: * Only change the level on the W83627EHF/EHG. The W83627DHG is more complex in this respect. * Don't change the level if the VID pins are in output mode. * Only set the level to TTL if VRM 9.x is used. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-01-02scsi: revert "[SCSI] Get rid of scsi_cmnd->done"Ingo Molnar
This reverts commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d ("[SCSI] Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit, but apparently it causes regressions: Bug 9370 - v2.6.24-rc2-409-g9418d5d: attempt to access beyond end of device http://bugzilla.kernel.org/show_bug.cgi?id=9370 this patch should be reintroduced in a more split-up form to make testing of it easier. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02[SCSI] scsi_sysfs: restore prep_fn when ULD is removedJames Bottomley
A recent bug report: http://bugzilla.kernel.org/show_bug.cgi?id=9674 Was caused because the ULDs now set their own prep functions, but don't necessarily reset the prep function back to the SCSI default when they are removed. This leads to panics if commands are sent to the device after the module is removed because the prep_fn is still pointing to the old module code. The fix for this is to implement a bus remove method that resets the prep_fn pointer correctly before calling the ULD specific driver remove method. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-31leds: Fix locomo LED driver oopsRichard Purdie
Fix locomo-leds to use the correct struct device to prevent an oops. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-31leds: Fix leds_list_lock locking issuesRichard Purdie
Covert leds_list_lock to a rw_sempahore to match previous LED trigger locking fixes, fixing lock ordering. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-29[SERIAL]: Fix section mismatches in Sun serial console drivers.David S. Miller
We're exporting an __init function, oops :-) The core issue here is that add_preferred_console() is marked as __init, this makes it impossible to invoke this thing from a driver probe routine which is what the Sparc serial drivers need to do. There is no harm in dropping the __init marker. This code will actually work properly when invoked from a modular driver, except that init will probably not pick up the console change without some other support code. Then we can drop the __init from sunserial_console_match() and we're no longer exporting an __init function to modules. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix spurious ECB page fault
2007-12-27[PCI] Do not enable CRS Software Visibility by defaultLinus Torvalds
It appears that some PCI-E bridges do the wrong thing in the presense of CRS Software Visibility and MMCONFIG. In particular, it looks like an ATI bridge (device ID 7936) will return 0001 in the vendor ID field of any bridged devices indefinitely. Not enabling CRS SV avoids the problem, and as we currently do not really make good use of the feature anyway (we just time out rather than do any threaded discovery as suggested by the CRS specs), we're better off just not enabling it. This should fix a slew of problem reports with random devices (generally graphics adapters or fairly high-performance networking cards, since it only affected PCI-E) not getting properly recognized on these AMD systems. If we really want to use CRS-SV, we may end up eventually needing a whitelist of systems where this should be enabled, along with some kind of "pcibios_enable_crs()" query to call the system-specific code. Suggested-by: Loic Prylli <loic@myri.com> Tested-by: Kai Ruhnau <kai@tragetaschen.dyndns.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-28[CRYPTO] padlock: Fix spurious ECB page faultHerbert Xu
The xcryptecb instruction always processes an even number of blocks so we need to ensure th existence of an extra block if we have to process an odd number of blocks. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-26[VETH]: move veth.h to include/linuxStephen Hemminger
Move veth.h from net/ to linux/ since it is a user api, and add it to user header processing Kbuild. [ Use header-y as suggested by Sam Ravnborg. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-26[TUNTAP]: Fix wrong debug message.Toyo Abe
This is a trivial fix of debug message. When a persist flag is set, the message should say "enabled". Signed-off-by: Toyo Abe <tabe@miraclelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: cmd64x: fix hwif->chipset setup MAINTAINERS: update ide-cd entry ide-cd: fix 'ireason' reporting in cdrom_pc_intr() ide-cd: fix error message in cdrom_pc_intr() ide-cd: add error message for DMA error to cdrom_read_intr() ide-cd: fix error messages in cdrom_write_intr() ide-cd: add missing 'ireason' masking to cdrom_write_intr() ide-cd: fix error messages in cdrom_{read,write}_check_ireason() ide-cd: use ide_cd_release() in ide_cd_probe() ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk drivers/ide/: Spelling fixes
2007-12-24cmd64x: fix hwif->chipset setupBartlomiej Zolnierkiewicz
commit 528a572daea90aa41db92683e5a8756acef514c4 ("ide: add ->chipset field to ide_pci_device_t") broke hwif->chipset setup (it is now set to ide_cmd646 for CMD648 instead of CMD646). It seems that the breakage happend while I was moving patches around (cmd64x_chipsets[] entries for CMD646 and CMD648 are identical except for 'name' field). Fix it and bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: fix 'ireason' reporting in cdrom_pc_intr()Bartlomiej Zolnierkiewicz
Mask 'ireason' variable so only the valid interrupt reason bits will be reported on "drive appears confused" error. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: fix error message in cdrom_pc_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: add error message for DMA error to cdrom_read_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: fix error messages in cdrom_write_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: add missing 'ireason' masking to cdrom_write_intr()Bartlomiej Zolnierkiewicz
Mask 'ireason' variable with 0x3 so the valid interrupt reason value is passed to cdrom_write_check_ireason() for checking. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: fix error messages in cdrom_{read,write}_check_ireason()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-24ide-cd: use ide_cd_release() in ide_cd_probe()Bartlomiej Zolnierkiewicz
Use ide_cd_release() to do the cleanup if ide_cdrom_setup() fails. It fixes: - the default drive->dsc_overlap value not being restored - the default drive->queue's prep_rq_fn not being restored - struct gendisk 'g' not being freed - wrong function name being reported on unregister_cdrom() error Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>