aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-17x86: Create clflush() inline, remove hardcoded wbinvdH. Peter Anvin
Create an inline function for clflush(), with the proper arguments, and use it instead of hard-coding the instruction. This also removes one instance of hard-coded wbinvd, based on a patch by Bauder de Oliveira Costa. [ tglx: arch/x86 adaptation ] Cc: Andi Kleen <andi@firstfloor.org> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17x86: remove rogue default m in drivers/video/KconfigAndi Kleen
Remove rogue default m in drivers/video/Kconfig default m is near always wrong, like here. For some reason ACPI likes to reintroduce these and I like to immediately squash them again before they pollute too many .configs. Cc: len.brown@intel.com Cc: luming.yu@gmail.com Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits) [POWERPC] Fix vmemmap warning in init_64.c [POWERPC] Fix 64 bits vDSO DWARF info for CR register [POWERPC] Add 1TB workaround for PA6T [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs [POWERPC] Quieten cache information at boot [POWERPC] Quieten clockevent printk [POWERPC] Enable SLUB in *_defconfig [POWERPC] Fix 1TB segment detection [POWERPC] Fix iSeries_hpte_insert prototype [POWERPC] Fix copyright symbol [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers [POWERPC] ibmebus: Add device creation and bus probing based on of_device [POWERPC] ibmebus: Remove bus match/probe/remove functions [POWERPC] Move of_device allocation into of_device.[ch] [POWERPC] mpc52xx: device tree changes for FEC and MDIO [POWERPC] bestcomm: GenBD task support [POWERPC] bestcomm: FEC task support [POWERPC] bestcomm: ATA task support [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200 [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes ...
2007-10-17Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: Remove magic macros for screen_info structure members [x86] remove uses of magic macros for boot_params access
2007-10-17security/ cleanupsAdrian Bunk
This patch contains the following cleanups that are now possible: - remove the unused security_operations->inode_xattr_getsuffix - remove the no longer used security_operations->unregister_security - remove some no longer required exit code - remove a bunch of no longer used exports Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: add debug message for adding new deviceBjorn Helgaas
Add PNP debug message when adding a device, remove similar PNPACPI message with less information. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: simplify PNPBIOS insert_deviceBjorn Helgaas
Hoist the struct pnp_dev alloc up into the function where it's used. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: use dev_info() in system driverBjorn Helgaas
Use dev_info() for a little consistency. Changes this: pnp: 00:01: ioport range 0xf50-0xf58 has been reserved pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x900-0x903 has been reserved to this: system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x900-0x903 has been reserved Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: use dev_info(), dev_err(), etc in coreBjorn Helgaas
If we have the struct pnp_dev available, we can use dev_info(), dev_err(), etc., to give a little more information and consistency. [akpm@linux-foundation.org: fix warning] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: simplify PNP card error handlingBjorn Helgaas
No functional change; just return errors early instead of putting the main part of the function inside an "if" statement. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: remove null pointer checksBjorn Helgaas
Remove some null pointer checks. Null pointers in these areas indicate programming errors, and I think it's better to oops immediately rather than return an error that is easily ignored. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Fix very high interrupt rate for IRQ8 (rtc) unless pnpacpi=offKrzysztof Oledzki
Workaround for broken systems with BIOS that makes RTC interrupt level triggered and/or active low. See http://bugzilla.kernel.org/show_bug.cgi?id=5243 Based on the patch from Shaohua Li <shaohua.li@intel.com> Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@suse.de> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: don't fail device init if no DMA channel availableJan Beulich
Most drivers for devices supporting ISA DMA can operate without DMA as well (falling back zo PIO). Thus it seems inappropriate for PNP to fail device initialization in case none of the possible DMA channels are available. Instead, it should be left to the driver to decide what to do if request_dma() fails. The patch at once adjusts the code to account for the fact that pnp_assign_dma() now doesn't need to report failure anymore. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: make pnpacpi_suspend handle errorsRafael J. Wysocki
pnpacpi_suspend() doesn't check the result returned by acpi_pm_device_sleep_state() before passing it to acpi_bus_set_power(), which may not be desirable.  Make it select the target power state of the device using its second argument if acpi_pm_device_sleep_state() fails. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Looks-ok-to: Pavel Machek <pavel@ucw.cz> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17floppy: remove register keyword use from floppy driverJesper Juhl
The floppy drive is slow. These days I see absolutely no good reason why the floppy driver should try to gain a tiny bit of speed by telling gcc to optimize access to some variables via the register keyword. Better to just leave gcc free to do whatever optimizations it deduces to be sane and not hamper it by telling it that some variables in the floppy driver are special and need to be fast (they don't). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17floppy: remove dead/commented out code from floppy driverJesper Juhl
A good initial step for a cleanup seems to me to be getting rid of old dead code. This stuff is either commented out or inside '#if 0' so it is not currently in use at all, let's just get rid of it once and for all. That's a few lines less to deal with. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17floppy: do a very minimal style cleanup of the floppy driverJesper Juhl
Yes, some of this will likely be replaced in later patches, but I do not see anyone else coming out of the woodwork with any patches for this driver, so I'll ignore comments about churn. I want to get this driver cleaned up, and if I'm going to do so I want to start with this basic style cleanup to reduce the reading pain a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17md: make sure read errors are auto-corrected during a 'check' resync in raid1NeilBrown
Whenever a read error is found, we should attempt to overwrite with correct data to 'fix' it. However when do a 'check' pass (which compares data blocks that are successfully read, but doesn't normally overwrite) we don't do that. We should. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17md: expose the degraded status of an assembled array through sysfsIustin Pop
The 'degraded' attribute is useful to quickly determine if the array is degraded, instead of parsing 'mdadm -D' output or relying on the other techniques (number of working devices against number of defined devices, etc.). The md code already keeps track of this attribute, so it's useful to export it. Signed-off-by: Iustin Pop <iusty@k1024.org> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17md: 'sync_action' in sysfs returns wrong value for readonly arraysNeilBrown
When an array is started read-only, MD_RECOVERY_NEEDED can be set but no recovery will be running. This causes 'sync_action' to report the wrong value. We could remove the test for MD_RECOVERY_NEEDED, but doing so would leave a small gap after requesting a sync action, where 'sync_action' would still report the old value. So make sure that for a read-only array, 'sync_action' always returns 'idle'. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17md: fix a bug in some never-used code.NeilBrown
http://bugzilla.kernel.org/show_bug.cgi?id=3277 There is a seq_printf here that isn't being passed a 'seq'. Howeve as the code is inside #ifdef MD_DEBUG, nobody noticed. Also remove some extra spaces. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17md: software Raid autodetect dev list not arrayMichael J. Evans
In current release kernels the md module (Software RAID) uses a static array (dev_t[128]) to store partition/device info temporarily for autostart. I discovered this (and that the devices are added as disks/partitions are discovered at boot) while I was debugging why only one of my MD arrays would come up whole, while all the others were short a disk. I eventually discovered that it was enumerating through all of 9 of my 11 hds (2 had only 4 partitions apiece) while the other 9 have 15 partitions (I wanted 64 per drive...). The last partition of the 8th drive in my 9 drive raid 5 sets wasn't added, thus making the final md array short both a parity and data disk, and it was started later, elsewhere. This patch replaces that static array with a list. [akpm@linux-foundation.org: removed unused var] Signed-off-by: Michael J. Evans <mjevans1983@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/char/ip2: fix used-uninit'd bugJeff Garzik
Fix bug flagged by a variable-used-uninitialized warning. [akpm@linux-foundation.org: coding-style] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lp_console: cleanupsPavel Machek
Remove NULL initializers and clean whitespace a bit. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17HVC console is also used by iSeries, so add that to HVC_DRIVER help.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Delay creation of khcvd threadRusty Russell
This changes hvc_init() to be called only when someone actually uses the hvc_console driver. Dave Jones complained when profiling bootup. hvc_console used to only be for Power aka pSeries: now lguest and Xen both want it built-in in case the kernel is a guest under one of those, even though usually it will be a native boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17tty: expose new methods needed for drivers to get termios rightAlan Cox
This adds three new functions (or in one case to be more exact makes it always available) tty_termios_copy_hw Copies all the hardware settings from one termios structure to the other. This is intended for drivers that support little or no hardware setting tty_termios_encode_baud_rate Allows you to set the input and output baud rate in a termios structure. A driver is supposed to set the resulting baud rate from a request so most will want to use this function to set the resulting input and output rates to match the hardware values. Internally it knows about keeping Bxxx encoding when possible to maximise compatibility. tty_encode_baud_rate As above but for the tty's own current termios structure I suspect this will initially need some tweaking as it gets enabled by driver patches over the next few mm cycles so consider this lot -mm only for the moment so it can stabilize and end up neat before it goes to base. I've tried not to break any obscure architectures - if you get a speed you can't represent the code will print warnings on non updated termios systems but not break. Once this is merged and seems sane I've got a growing pile of driver updates to use it - notably for USB serial drivers. [akpm@linux-foundation.org: cleanups] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lk201: remove obsolete driverMaciej W. Rozycki
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be used by the old dz.c and zs.c drivers, which is now orphan code referred to from nowhere and does not build anymore. A modern replacement is available as drivers/input/keyboard/lkkbd.c. There are no plans to do anything about this piece of code and it does not fit anywhere anymore, so it is not just a matter of maintenance or the lack of. There are still some bits that might be added to the new lkkbd.c driver based on the old code, and the embedded hardware documentation which is otherwise quite hard to get hold of might be useful to keep too. Both of these can be done separately though. RIP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Make the pr_*() family of macros in kernel.h completeEmil Medve
Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was defined multiple times in several other places Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Tony Lindgren <tony@atomide.com> Reviewed-by: Satyam Sharma <satyam@infradead.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17I2O: Fix "defined but not used" build warningsSatyam Sharma
drivers/message/i2o/exec-osm.c:539: warning: `i2o_exec_lct_notify' defined but not used comes when CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=n, because its only callsite is #ifdef'ed as such. So let's #ifdef the function definition also. Also move the definition to before the callsite, to get rid of forward prototype. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17add CONFIG_VT_UNICODEBill Nottingham
As of now, the kernel defaults to non-unicode and XLATE for the keyboard. We've been changing this in Fedora, but that requires patching the defaults in the kernel. The attached introduces CONFIG_VT_UNICODE, which sets the console in unicode mode by default on boot, including both the virtual terminal and the keyboard driver. Signed-off-by: Bill Nottingham <notting@redhat.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17make dmapool code use __set_current_state()Arjan van de Ven
Signed-off-by: Arjan van de Ven <arjan@Linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove final traces of long-deprecated "ramdisk" kernel parmRobert P. J. Day
Since the "ramdisk" kernel parameter has been officially deprecated since at least 2.6.18, might as well finally get rid of it. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/block/cciss.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we have already oops'ed if "disk" was NULL. Since "disk" being NULL seems impossible at this point this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17n_hdlc.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we'd have already oops'ed if "tty" was NULL. Since "tty" can't be NULL when we reach this line of code this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17cciss: fix error reporting for SG_IOSteve Cameron
This fixes a problem with the way cciss was filling out the "errors" field of the request structure upon completion of requests. Previously, it just put a 1 or a 0 in there and used the negation of this as the uptodate parameter to one of the functions in the block layer, being a block device. For the SG_IO ioctl, this was not sufficient, and we noticed that, for example, sg_turs from sg3_utils did not correctly detect problems due to cciss having set rq->errors incorrectly. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17NBD: allow hung network I/O to be cancelledPaul Clements
Allow NBD I/O to be cancelled when a network outage occurs. Previously, I/O would just hang, and if enough I/O was hung in nbd, the system (at least user-level) would completely hang until a TCP timeout (default, 15 minutes) occurred. The patch introduces a new ioctl NBD_SET_TIMEOUT that allows a transmit timeout value (in seconds) to be specified. Any network send that exceeds the timeout will be cancelled and the nbd connection will be shut down. I've tested with various timeout values and 6 seconds seems to be a good choice for the timeout. If the NBD_SET_TIMEOUT ioctl is not called, you get the old (I/O hang) behavior. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17NBD: set uninitialized devices to size 0Paul Clements
This fixes errors with utilities (such as LVM's vgscan) that try to scan all devices. Previously this would generate read errors when uninitialized nbd devices were scanned: # vgscan Reading all physical volumes. This may take a while... /dev/nbd0: read failed after 0 of 1024 at 0: Input/output error /dev/nbd0: read failed after 0 of 1024 at 509804544: Input/output error /dev/nbd0: read failed after 0 of 2048 at 0: Input/output error /dev/nbd1: read failed after 0 of 1024 at 509804544: Input/output error /dev/nbd1: read failed after 0 of 2048 at 0: Input/output error From now on, uninitialized nbd devices will have size zero, which prevents these errors. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17floppy: tolerate DMA channel unavailabilityJan Beulich
The floppy driver is already written to be able to operate in virtual DMA mode. Thus it can easily be adjusted to tolerate failure from fd_request_dma() as long as virtual DMA mode is not disallowed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17jsm: Remove further unneeded crudAlan Cox
Remove some remaining vestiges of the old hacks jsm had to work around the old tty buffering. With the new tty buffering it simply doesn't matter any more. [michal.k.k.piotrowski@gmail.com: fix warning] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Scott Kilau <scottk@digi.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17mxser: Remove use of dead TTY_FLIPBUF_SIZE definitionAlan Cox
We simply define it to the same value. Nowdays the TTY flip value is irrelevant but the value it used is as good as any so why risk breaking it Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17unicode diacritics supportSamuel Thibault
There have been issues with non-latin1 diacritics and unicode. http://bugzilla.kernel.org/show_bug.cgi?id=7746 Git 759448f459234bfcf34b82471f0dba77a9aca498 `Kernel utf-8 handling' partly resolved it by adding conversion between diacritics and unicode. The patch below goes further by just turning diacritics into unicode, hence providing better future support. The kbd support can be fetched from http://bugzilla.kernel.org/attachment.cgi?id=12313 This was tested in all of latin1, latin9, latin2 and unicode with french and czech dead keys. Turn the kernel accent_table into unicode, and extend ioctls KDGKBDIACR and KDSKBDIACR into their equivalents KDGKBDIACRUC and KDSKBDIACR. New function int conv_uni_to_8bit(u32 uni) for converting unicode into 8bit _input_. No, we don't want to store the translation, as it is potentially sparse and large. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Jan Engelhardt <jengelh@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17aoe: remove unecessary wrapper functionEd L. Cashin
We can just use skb_mac_header now, and we don't need a wrapper function to perform the cast. Instead of requiring the reader to check aoe.h to look up what an aoe_hdr function does, I'd rather do without it. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17pnp: avoid a small unlikely memory leak in proc_read_escd()Jesper Juhl
There's a small and unlikely memory leak in drivers/pnp/pnpbios/proc.c::proc_read_escd(). It's inside a sanity check, so it probably won't trigger often (if at all), however it *is* a potential leak and it's easy to avoid, so let's just fix it :) Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Tweak /proc/ipmi removalAlexey Dobriyan
Driver does proc_mkdir("ipmi", NULL); but remove_proc_entry(proc_ipmi_root->name, &proc_root); This is OK and working if only slightly inconsistent. Also changing proc_root to NULL will help OpenVZ which has multiple proc roots and, as we now know, requires matching parents in such cases. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17tpm: pay attention to IRQ info from PNPBjorn Helgaas
If we discover the TIS TPM device via PNP, use the PNP IRQ information rather than probing for an IRQ. If PNP shows no IRQ, run the TPM in polling mode. Tested-by: <valdis.kletnieks@vt.edu> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/char/ip2/ip2main.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/char/ip2/ip2main.c | 104398 -> 104346 (-52 bytes) drivers/char/ip2/ip2main.o | 210710 -> 210702 (-8 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17drivers/char/consolemap.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/char/consolemap.c | 22678 -> 22650 (-28 bytes) drivers/char/consolemap.o | 90113 -> 90029 (-84 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17epca.c: reformat comments and coding style improvementsAlexey Dobriyan
* Remove stupid comments, like, at the beginning of every function that function begins (twice per function) and at the end (once) * Remove trailing or otherwise broken whitespace as per let c_space_errors=1 * Reformat comments to fit it into 80 columns and remove stupid ------------'s. * Indent case labels on the same column where switch begins * other minor CS tweaks not worth mentioning Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>