aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-02-27qla3xxx: bugfix: Fixed jumbo frame handling for 3032 chip.Ron Mercer
The scatter/gather lists were not being build correctly. When large frames spanned several buffers the chip would panic. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Clean up receive process.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Dynamically size the rx buffer queue based on the MTU.Ron Mercer
This change removes use of constants for rx buffer queue size and instead calculates the queue length based on what he MTU is set to. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Remove API to change MTU.Ron Mercer
This network device driver shares the same hardware as the qla4xxx iSCSI driver. Changing the MTU via the device interface will cause qla4xxx to crash as there is no way to make notification. Users wishing to change the MTU must do so using an iSCSI utility such as Qlogic SanSurfer. This forces the user to unload/reload this network device driver after the MTU value has been changed in flash. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Fix deadlock issue on error pathsBenjamin Li
1) Fix deadlock issue when in QL_RESET_ACTIVE state and traversing through the Link State Machine 2) Fix deadlock issue when ethtool would call ql_get_settings() 3) Fix deadlock issue when adaptor is ifup'ed but adaptor fails to initialize Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Changed to use netdev_alloc_skb() from dev_alloc_skbBenjamin Li
Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Remove unnecessary memset() in qla3xxx_send()Benjamin Li
We do not need to zero out the 64 byte MAC request I/O control block. By zeroing out the control block and setting it to proper fields is redundant work. This is because in the qla3xxx_send() function we will already set the proper fields in this structure. The unused fields are not looked at by the hardware and do not need to be zeroed out. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27qla3xxx: Return proper error codes when the 4022/4032 is being probedBenjamin Li
The return code was not properly set when when allocating memory or mapping memory failed. Depending on the stack, the return code would sometimes return 0, which indicates everything was ok, when in fact there was an error. This would cause trouble when the module was removed. Now, we will pass back the proper return code when an error occurs during the PCI probe. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27Alignment in mv643xx_ethRalf Baechle
The driver contains this little piece of candy: #if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_NOT_COHERENT_CACHE) #define ETH_DMA_ALIGN L1_CACHE_BYTES #else #define ETH_DMA_ALIGN 8 #endif Any reason why we're not using dma_get_cache_alignment() instead? Ralf Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27sgiseeq: Don't include unnecessary headerfiles.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27ucc_geth: use of_get_mac_address()Timur Tabi
Update ucc_geth_probe() to use function of_get_mac_address() to obtain the MAC address. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27skge: comma consistencyStephen Hemminger
Use comma's consistently. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27skge: fix transmitter flow controlStephen Hemminger
It looks like the skge driver inherited another bug from the sk98lin code. If I send from 1000mbit port to a machine on 100mbit port, the switch should be doing hardware flow control, but no pause frames show up in the statistics. This is the analog of the recent sky2 fixes. The device needs to listen for multicast pause frames and then not discard them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27myri10ge: workaround buggy adopted firmwaresBrice Goglin
Work around a bug which occurs when adopting firmware versions 1.4.4 though 1.4.11 where broadcasts are filtered as if they were multicasts. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27NetXen: Driver ifconfig fixAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27NetXen: Driver unload fixesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: janitorial, typosLinas Vepstas
Janitorial patch. Undo long lines, fix typo in err msg. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: transmit raceLinas Vepstas
Multiple threads performing a transmit can race into the spidernet tx ring cleanup code. This puts the relevant check under a lock. Signed-off-by: Linas Vepstas <lins@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: fix racy double-free of skbLinas Vepstas
It appears that under certain circumstances, a race will result in a double-free of an skb. This patch null's out the skb pointer upon the skb free, avoiding the inadvertent deref of bogus data. The next patch fixes the actual race. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: separate hardware state from driver state.Linas Vepstas
This patch separates the hardware descriptor state from the driver descriptor state, per (old) suggestion from Ben Herrenschmidt. This compiles and boots and seems to work. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: move medium variable into card structJens Osterkamp
This moves the medium variable into the spidernet card structure. It renames the GMII_ variables to BCM54XX specific ones. Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: remove txram full loggingIshizaki Kou
This patches removes logging for SPIDER_NET_GTMFLLINT interrupts. Since the interrupts are not irregular, and they happen frequently when using 100Mbps network switches. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: spidernet: add support for CellebKou Ishizaki
This patch adds or changes some HW specific settings for spider_net on Celleb. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: load firmware when openKou Ishizaki
This patch moves calling init_firmware() from spider_net_probe() to spider_net_open() so as to use the driver by built-in. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: autoneg support for CellebKou Ishizaki
Add auto negotiation support for Celleb. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27spidernet: compile break.Linas Vepstas
As of 2.6.20-git4, the spider_net driver does not compile. This appears to be due to some archaic usage involving kobjects. It also fixes a nasty double-free during ifdown of the interface. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27sungem_phy: support bcm5461 phy, autoneg.Jens Osterkamp
This version moves the medium variable to the card specific structure and changes the GMII_* to BCM54XX_* #defines. This patch adds improved version of enable_fiber for both the 5421 and the 5461 phy. It is now possible to specify with these wether you want autonegotiation or not. This is needed for bladecenter switches where some expect autonegotiation and some dont seem to like this at all. Depending on this flag it sets phy->autoneg accordingly for the fiber mode. More importantly it implements proper read_link and poll_link functions for both phys which can handle both copper and fiber mode by determining the medium first and then branching to the required functions. For fiber they all work fine, for copper they are not tested but return the result of the genmii_* function anyway which is supposed to work. The patch moves the genmii_* functions around to avoid foreward declarations. Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27forcedeth: fix checksum feature in mcp65Ayaz Abdulla
This patch removes checksum offload feature in mcp65 chipsets as they are not supported in hw. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27forcedeth: disable msixAyaz Abdulla
There seems to be an issue when both MSI-X is enabled and NAPI is configured. This patch disables MSI-X until the issue is root caused. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27forcedeth: fixed missing call in napi pollAyaz Abdulla
The napi poll routine was missing the call to the optimized rx process routine. This patch adds the missing call for the optimized path. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27[netdrvr] tc35815: fix obvious bugsJeff Garzik
* clear_page() use is wrong. We might have multiple pages. Use memset() instead. * Call pci_unregister_driver() in module exit. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-26Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (51 commits) [libata] bump versions [libata] Trim trailing whitespace. [libata] sata_mv: Fix 50xx irq mask [libata] sata_mv: don't touch reserved bits in EDMA config register libata: Use new id_to_dma_mode function to tidy reporting in more drivers (minimally tested) pata_pcmcia: Fix oops in 2.6.21-rc1 Add id_to_dma_mode function for printing DMA modes sata_promise: simplify port setup sata_promise: fix 20619 new EH merge error [libata] ACPI: remove needless ->qc_issue hook existence test sata_vsc: refactor vsc_sata_interrupt and hook up error handling sata_sil: ignore and clear spurious IRQs while executing commands by polling sata_mv: fix pci_enable_msi() error handling pata_amd: fix an obvious bug in cable detection [libata] ata_piix: remove duplicate PCI IDs sata_nv: complain on spurious completion notifiers libata: test major version in ata_id_is_sata() sata_nv: kill old private BMDMA helper functions libata: fix remaining ap->id ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated) ...
2007-02-26Revert "[CPUFREQ] constify cpufreq_driver where possible."Linus Torvalds
This reverts commit aeeddc1435c37fa3fc844f31d39c185b08de4158, which was half-baked and broken. It just resulted in compile errors, since cpufreq_register_driver() still changes the 'driver_data' by setting bits in the flags field. So claiming it is 'const' _really_ doesn't work. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] constify some data tables. [CPUFREQ] constify cpufreq_driver where possible. {rd,wr}msr_on_cpu SMP=n optimization [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR rdmsr_on_cpu, wrmsr_on_cpu [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI
2007-02-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] CLPS7500 doesn't have IO ports [ARM] Fix more apm-emulation.h [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx. [ARM] 4233/1: nand/s3c2410.c: warning fix [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET [ARM] 4224/2: allow XIP kernel to boot again [ARM] 4232/1: AT91: Generic GPIO bug [ARM] 4231/1: AT91: Merge and typo fixes. [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1
2007-02-26Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Correct debugging output when path record lookup fails RDMA/cxgb3: Stop the EP Timer on BAD CLOSE RDMA/cxgb3: cleanups RDMA/cma: Remove unused node_guid from cma_device structure IB/cm: Remove ca_guid from cm_device structure RDMA/cma: Request reversible paths only IB/core: Set hop limit in ib_init_ah_from_wc correctly IB/uverbs: Return correct error for invalid PD in register MR IPoIB: Remove unused local_rate tracking IPoIB/cm: Improve small message bandwidth IB/mthca: Make 2 functions static
2007-02-26[PATCH] Fix oops in pata_pcmciaAlan
The change to the devres layer re-orders the execution of cleanup functions and in turn causes the pcmcia layer to oops as it zaps a pointer now needed later on. We simply leave the pointer alone. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26[PATCH] Make hvc_console.c compile on non-powerpc: Remove NO_IRQRusty Russell
Paulus preferred this over #defining NO_IRQ in the file, since that's 0 for powerpc anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26IPoIB: Correct debugging output when path record lookup failsRoland Dreier
If path_rec_completion() is passed a non-NULL path record pointer along with an unsuccessful status value, the tracing code incorrectly prints the (invalid) DLID from the path record rather than the more interesting status code. The actual logic of the function correctly uses the path record only if the status indicates a successful lookup. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-26[PATCH] Fix build-failure in drivers/video/s3fb.cOndrej Zajicek
Toralf Förster pointed out that drivers/video/s3fb.c would fail to compile: > ... > CC drivers/video/s3fb.o > drivers/video/s3fb.c: In function `s3_pci_remove': > drivers/video/s3fb.c:1003: warning: unused variable `par' > drivers/video/s3fb.c: In function `s3fb_setup': > drivers/video/s3fb.c:1141: error: `mtrr' undeclared (first use in this function) > drivers/video/s3fb.c:1141: error: (Each undeclared identifier is reported only once > drivers/video/s3fb.c:1141: error: for each function it appears in.) > make[2]: *** [drivers/video/s3fb.o] Error 1 > make[1]: *** [drivers/video] Error 2 > make: *** [drivers] Error 2 Here is fix, it also fixes broken boot options. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits) [PARISC] Use symbolic last syscall in __NR_Linux_syscalls [PARISC] Add missing statfs64 and fstatfs64 syscalls Revert "[PARISC] Optimize TLB flush on SMP systems" [PARISC] Compat signal fixes for 64-bit parisc [PARISC] Reorder syscalls to match unistd.h Revert "[PATCH] make kernel/signal.c:kill_proc_info() static" [PARISC] fix sys_rt_sigqueueinfo [PARISC] fix section mismatch warnings in harmony sound driver [PARISC] do not export get_register/set_register [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code [PARISC] convert to use CONFIG_64BIT instead of __LP64__ [PARISC] use CONFIG_64BIT instead of __LP64__ [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro [PARISC] more ENTRY(), ENDPROC(), END() conversions [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc [PARISC] Fixes /proc/cpuinfo cache output on B160L [PARISC] implement standard ENTRY(), END() and ENDPROC() [PARISC] kill ENTRY_SYS_CPUS [PARISC] clean up debugging printks in smp.c [PARISC] factor syscall_restart code out of do_signal ... Fix conflict in include/linux/sched.h due to kill_proc_info() being made publicly available to PARISC again.
2007-02-26[PATCH] drivers/mfd/sm501.c: Replace pci_module_init with pci_register_driverRichard Knutsson
Replace pci_module_init with pci_register_driver Signed-off-by: Richard Knutson <ricknu-0@student.ltu.se> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [XFRM]: Fix oops in xfrm4_dst_destroy() [XFRM_TUNNEL]: Reload header pointer after pskb_may_pull/pskb_expand_head [IPV4]: Use random32() in net/ipv4/multipath [BRIDGE]: eliminate workqueue for carrier check [BRIDGE]: get rid of miscdevice include [IPV6]: Fix __ipv6_addr_type() export in correct place. [IPV4] devinet: Register inetdev earlier. [IPV6] ADDRCONF: Register inet6_dev earlier. [IPV6] ADDRCONF: Manage prefix route corresponding to address manually added. [IPV6] IP6TUNNEL: Use update_pmtu() of dst on xmit. [IPV6] ADDRCONF: Statically link __ipv6_addr_type() for sunrpc subsystem. [IPV4]: Correct links in net/ipv4/Kconfig [SCTP]: Strike the transport before updating rto. [SCTP]: Fix connection hang/slowdown with PR-SCTP [TCP]: Fix MD5 signature pool locking. [TG3]: TSO workaround fixes. [AF_PACKET]: Remove unnecessary casts. [IPV6]: Adjust inet6_exit() cleanup sequence against inet6_init() [IPSEC]: More fix is needed for __xfrm6_bundle_create(). [IRDA] net/irda/: proper prototypes ...
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC] uctrl: Check request_irq() return value. [SPARC64]: Update defconfig. [SPARC64] bbc_i2c: Fix kenvctrld eating %100 cpu. [SPARC64]: Fix arch_teardown_msi_irq(). [SPARC64]: virt_irq_free only needed when CONFIG_PCI_MSI [SPARC]: Remove the broken SUN_AURORA driver.
2007-02-26Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Add support for Cobalt Server front LED leds: Add IPAQ h1940 LEDs support
2007-02-26[TG3]: TSO workaround fixes.Michael Chan
1. Add race condition check after netif_stop_queue(). tg3_tx() runs without netif_tx_lock and can race with tg3_start_xmit_dma_bug() -> tg3_tso_bug(). 2. Firmware TSO in 5703/5704/5705 also have the same TSO limitation, i.e. they cannot handle TSO headers bigger than 80 bytes. Rename TG3_FL2_HW_TSO_1_BUG to TG3_FL2_TSO_BUG and set this flag on these chips as well. 3. Update version to 3.74. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-26[Bluetooth] Make use of MODULE_FIRMWAREMarcel Holtmann
Some Bluetooth drivers need one or more binary firmware images. Export these image names via the MODULE_FIRMWARE tag. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: Revert "Driver core: let request_module() send a /sys/modules/kmod/-uevent" Driver core: fix error by cleanup up symlinks properly make kernel/kmod.c:kmod_mk static power management: fix struct layout and docs power management: no valid states w/o pm_ops Driver core: more fallout from class_device changes for pcmcia sysfs: move struct sysfs_dirent to private header driver core: refcounting fix Driver core: remove class_device_rename
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: export autosuspend delay in sysfs sysfs: allow attributes to be added to groups USB: make autosuspend delay a module parameter USB: minor cleanups for sysfs.c USB: add a blacklist for devices that can't handle some things we throw at them. USB: refactor usb device matching and create usb_device_match USB: Wacom driver updates gadgetfs: Fixed bug in ep_aio_read_retry. USB: Use USB defines in usbmouse.c and usbkbd.c USB: add rationale on why usb descriptor structures have to be packed USB: ftdi_sio: Adding VID and PID for Tellstick UHCI: Eliminate asynchronous skeleton Queue Headers UHCI: Add macros for computing DMA values USB: Davicom DM9601 usbnet driver USB: asix.c - Add JVC-PRX1 ids usbmon: Remove erroneous __exit USB: add driver for iowarrior devices. USB: option: add a bunch of new device ids USB: option: remove duplicate device id table
2007-02-26Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix port 0 mac address for mips mv6434x platforms [SERIAL] serial_txx9 driver update Revert "[PATCH] Generic ioremap_page_range: mips conversion" [MIPS] Cobalt: Rename "Colo" MTD partition to "firmware". [MIPS] SMP: Get smp_tune_scheduling to do something useful. [MIPS] Add basic SMARTMIPS ASE support
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 03:24:50 +0000