aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-20epca: use tty_portAlan Cox
Switch the EPCA driver to include and begin using a tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Fix compile errors in SGI console drivers (linux-next tree)Takashi Iwai
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20- Fix compile errors in SGI console drivers (linux-next tree)Jack Steiner
Fix compile errors in SGI console drivers caused by changes to the tty_port structures in the linux-next tree. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ttydev: fix pamc_zilog for tty pointer moveStephen Rothwell
Today's linux-next build (powerpc allyesconfig) failed like this: drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars': drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty' drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty' I applied the patch below (which builds but may, or may not, be correct). -- Cheers, Stephen Rothwell sfr@canb.auug.org.au http://www.canb.auug.org.au/~sfr/ Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ttydev: fix pamc_zilog for tty pointer moveStephen Rothwell
Today's linux-next build (sparc64 defconfig) failed like this: drivers/serial/sunhv.c: In function `receive_chars': drivers/serial/sunhv.c:188: error: structure has no member named `tty' drivers/serial/sunsu.c: In function `receive_chars': drivers/serial/sunsu.c:314: error: structure has no member named `tty' drivers/serial/sunsab.c: In function `receive_chars': drivers/serial/sunsab.c:121: error: structure has no member named `tty' I applied the following patch (which, again, may not be correct). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20serial: use tty_portAlan Cox
Switch the serial_core based drivers to use the new tty_port structure. We can't quite use all of it yet because of the dynamically allocated extras in the serial_core layer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: Introduce a tty_port common structureAlan Cox
Every tty driver has its own concept of a port structure and because they all differ we cannot extract commonality. Begin fixing this by creating a structure drivers can elect to use so that over time we can push fields into this and create commonality and then introduce common methods. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20drivers/serial/: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time in comments, printk's and MODULE_DESCRIPTION's (no printk's or MODULE_DESCRIPTION's are completely removed). While doing this I also found and fixed a missing \n in a printk in m32r_sio.c Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20drivers/char/rio/: remove VCS tagsAdrian Bunk
This patch removes ancient VCS tags (either protected by #ifdef SCCS_LABELS or commented out). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: Ldisc revampAlan Cox
Move the line disciplines towards a conventional ->ops arrangement. For the moment the actual 'tty_ldisc' struct in the tty is kept as part of the tty struct but this can then be changed if it turns out that when it all settles down we want to refcount ldiscs separately to the tty. Pull the ldisc code out of /proc and put it with our ldisc code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: isicom, enable/disable pci deviceJiri Slaby
Don't forget to enable and disable PCI devices. The device might be unusable without that. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Subject: [PATCH 2/2] atmel_serial: Implement flush_buffer() hookHaavard Skinnemoen
Avoid dumping garbage to the serial port when the tty is flushed. This tends to happen when rebooting from a serial console. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_opsHaavard Skinnemoen
Serial drivers using DMA (like the atmel_serial driver) tend to get very confused when the xmit buffer is flushed and nobody told them. They also tend to spew a lot of garbage since the DMA engine keeps running after the buffer is flushed and possibly refilled with unrelated data. This patch adds a new flush_buffer operation to the uart_ops struct, along with a call to it from uart_flush_buffer() right after the xmit buffer has been cleared. The driver can implement this in order to syncronize its internal DMA state with the xmit buffer when the buffer is flushed. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-17Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH] ocfs2: fix oops in mmap_truncate testing configfs: call drop_link() to cleanup after create_link() failure configfs: Allow ->make_item() and ->make_group() to return detailed errors. configfs: Fix failing mkdir() making racing rmdir() fail configfs: Fix deadlock with racing rmdir() and rename() configfs: Make configfs_new_dirent() return error code instead of NULL configfs: Protect configfs_dirent s_links list mutations configfs: Introduce configfs_dirent_lock ocfs2: Don't snprintf() without a format. ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs ocfs2/net: Silence build warnings on sparc64 ocfs2: Handle error during journal load ocfs2: Silence an error message in ocfs2_file_aio_read() ocfs2: use simple_read_from_buffer() ocfs2: fix printk format warnings with OCFS2_FS_STATS=n [PATCH 2/2] ocfs2: Instrument fs cluster locks [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
2008-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: pcmcia: ide-cs: Remove outdated comment pcmcia: fix cisinfo_t removal pcmcia: fix return value in cm4000_cs.c
2008-07-17[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPPStefan Haberland
return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-17[S390] qdio: new qdio driver.Jan Glauber
List of major changes: - split qdio driver into several files - seperation of thin interrupt code - improved handling for multiple thin interrupt devices - inbound and outbound processing now always runs in tasklet context - significant less tasklet schedules per interrupt needed - merged qebsm with non-qebsm handling - cleanup qdio interface and added kerneldoc - coding style Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com> Reviewed-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-17[S390] cio: Export chsc_error_from_response().Cornelia Huck
Make chsc_error_from_response() available to chsc callers outside of chsc.c (namely qdio) to avoid duplicating error checking code. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-17[S390] vmur: Fix return code handling.Frank Munzert
Use -EOPNOTSUPP instead of -ENOTSUPP. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-17[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-17[S390] dasd: fix unsolicited SIM handling.Stefan Haberland
Add missing schedule_bh and check that there is 32 bit sense data. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-17[S390] zfcpdump: Make SCSI disk dump tool recognize storage holesFrank Munzert
The kernel part of zfcpdump establishes a new debugfs file zcore/memmap which exports information on memory layout (start address and length of each memory chunk) to its userspace counterpart. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-16scsi_dh: Verify "dev" is a sdev before accessing it.Chandra Seetharaman
Before accessing the device data structure in hardware handlers, make sure it is a indeed a sdev device. Yinghai Lu <yhlu.kernel@gmail.com> found the bug on Jul 16, 2008, and later tested/verified the following fix. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
2008-07-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits) sdio_uart: Fix SDIO break control to now return success or an error mmc: host driver for Ricoh Bay1Controllers sdio: sdio_io.c Fix sparse warnings sdio: fix the use of hard coded timeout value. mmc: OLPC: update vdd/powerup quirk comment mmc: fix spares errors of sdhci.c mmc: remove multiwrite capability wbsd: fix bad dma_addr_t conversion atmel-mci: Driver for Atmel on-chip MMC controllers mmc: fix sdio_io sparse errors mmc: wbsd.c fix shadowing of 'dma' variable MMC: S3C24XX: Refuse incorrectly aligned transfers MMC: S3C24XX: Add maintainer entry MMC: S3C24XX: Update error debugging. MMC: S3C24XX: Add media presence test to request handling. MMC: S3C24XX: Fix use of msecs where jiffies are needed MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices MMC: S3C24XX: Fix s3c2410_dma_request() return code check. MMC: S3C24XX: Allow card-detect on non-IRQ capable pin MMC: S3C24XX: Ensure host->mrq->data is valid ... Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c and include/linux/mmc/sdio_func.h when merging.
2008-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (76 commits) IDE: Report errors during drive reset back to user space Update documentation of HDIO_DRIVE_RESET ioctl IDE: Remove unused code IDE: Fix HDIO_DRIVE_RESET handling hd.c: remove the #include <linux/mc146818rtc.h> update the BLK_DEV_HD help text move ide/legacy/hd.c to drivers/block/ ide/legacy/hd.c: use late_initcall() remove BLK_DEV_HD_ONLY ide: endian annotations in ide-floppy.c ide-floppy: zero out the whole struct ide_atapi_pc on init ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path ide-cd: move request prep from cdrom_start_rw_cont to rq issue path ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path ide-cd: fold cdrom_start_seek into ide_cd_do_request ide-cd: simplify request issuing path ide-cd: mv ide_do_rw_cdrom ide_cd_do_request ide-cd: cdrom_start_seek: remove unused argument block ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block ...
2008-07-16Fix FADT parsingJan Beulich
The (1.0 inherited) separate length fields in the FADT are byte granular. Further, PM1a/b may have distinct lengths and live in distinct address spaces. acpi_tb_convert_fadt() should account for all of these conditions. Apart from these changes I'm puzzled by the fact that, not just for acpi_gbl_xpm1{a,b}_enable, acpi_hw_low_level_{read,write}() get an explicit size passed rather than using the size found in the passed GAS. What happens on a platform that defines PM1{a,b} wider than 16 bits? Of course, acpi_hw_low_level_{read,write}() at present are entirely un-prepared to deal with sizes other than 8, 16, or 32, not to speak of a non-zero bit_offset or access_width... Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.Aaron Durbin
Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-16ACPI: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). The most obvious change will be messages like this: -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31 +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16PNPACPI: add support for HP vendor-specific CCSR descriptorsBjorn Helgaas
The HP CCSR descriptor describes MMIO address space that should appear as a MEM resource. This patch adds support for parsing these descriptors in the _CRS data. The visible effect of this is that these MEM resources will appear in /sys/devices/pnp0/.../resources, which means that "lspnp -v" will report it, user applications can use this to locate device CSR space, and kernel drivers can use the normal PNP resource accessors to locate them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16PNP: avoid legacy IDE IRQsBjorn Helgaas
If an IDE controller is in compatibility mode, it expects to use IRQs 14 and 15, so PNP should avoid them. This patch should resolve this problem report: parallel driver grabs IRQ14 preventing legacy SFF ATA controller from working https://bugzilla.novell.com/show_bug.cgi?id=375836 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16PNP: convert resource options to single linked listBjorn Helgaas
ISAPNP, PNPBIOS, and ACPI describe the "possible resource settings" of a device, i.e., the possibilities an OS bus driver has when it assigns I/O port, MMIO, and other resources to the device. PNP used to maintain this "possible resource setting" information in one independent option structure and a list of dependent option structures for each device. Each of these option structures had lists of I/O, memory, IRQ, and DMA resources, for example: dev independent options ind-io0 -> ind-io1 ... ind-mem0 -> ind-mem1 ... ... dependent option set 0 dep0-io0 -> dep0-io1 ... dep0-mem0 -> dep0-mem1 ... ... dependent option set 1 dep1-io0 -> dep1-io1 ... dep1-mem0 -> dep1-mem1 ... ... ... This data structure was designed for ISAPNP, where the OS configures device resource settings by writing directly to configuration registers. The OS can write the registers in arbitrary order much like it writes PCI BARs. However, for PNPBIOS and ACPI devices, the OS uses firmware interfaces that perform device configuration, and it is important to pass the desired settings to those interfaces in the correct order. The OS learns the correct order by using firmware interfaces that return the "current resource settings" and "possible resource settings," but the option structures above doesn't store the ordering information. This patch replaces the independent and dependent lists with a single list of options. For example, a device might have possible resource settings like this: dev options ind-io0 -> dep0-io0 -> dep1->io0 -> ind-io1 ... All the possible settings are in the same list, in the order they come from the firmware "possible resource settings" list. Each entry is tagged with an independent/dependent flag. Dependent entries also have a "set number" and an optional priority value. All dependent entries must be assigned from the same set. For example, the OS can use all the entries from dependent set 0, or all the entries from dependent set 1, but it cannot mix entries from set 0 with entries from set 1. Prior to this patch PNP didn't keep track of the order of this list, and it assigned all independent options first, then all dependent ones. Using the example above, that resulted in a "desired configuration" list like this: ind->io0 -> ind->io1 -> depN-io0 ... instead of the list the firmware expects, which looks like this: ind->io0 -> depN-io0 -> ind-io1 ... Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ISAPNP: handle independent options following dependent onesBjorn Helgaas
The ISAPNP spec recommends that independent options precede dependent ones, but this is not actually required. The current ISAPNP code incorrectly puts such trailing independent options at the end of the last dependent option list. This patch fixes that bug by resetting the current option list to the independent list when we see an "End Dependent Functions" tag. PNPBIOS and PNPACPI handle this the same way. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: remove extra 0x100 bit from option priorityBjorn Helgaas
When building resource options, ISAPNP and PNPBIOS set the priority to something like "0x100 | PNP_RES_PRIORITY_ACCEPTABLE", but we immediately mask off the 0x100 again in pnp_build_option(), so that bit looks superfluous. Thanks to Rene Herman <rene.herman@gmail.com> for pointing this out. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: support optional IRQ resourcesBjorn Helgaas
This patch adds an IORESOURCE_IRQ_OPTIONAL flag for use when assigning resources to a device. If the flag is set and we are unable to assign an IRQ to the device, we can leave the IRQ disabled but allow the overall resource allocation to succeed. Some devices request an IRQ, but can run without an IRQ (possibly with degraded performance). This flag lets us run the device without the IRQ instead of just leaving the device disabled. This is a reimplementation of this previous change by Rene Herman <rene.herman@gmail.com>: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b73a223661ed137c5d3d2635f954382e94f5a43 I reimplemented this for two reasons: - to prepare for converting all resource options into a single linked list, as opposed to the per-resource-type lists we have now, and - to preserve the order and number of resource options. In PNPBIOS and ACPI, we configure a device by giving firmware a list of resource assignments. It is important that this list has exactly the same number of resources, in the same order, as the "template" list we got from the firmware in the first place. The problem of a sound card MPU401 being left disabled for want of an IRQ was reported by Uwe Bugla <uwe.bugla@gmx.de>. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: rename pnp_register_*_resource() local variablesBjorn Helgaas
No functional change; just rename "data" to something more descriptive. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNPACPI: ignore _PRS interrupt numbers larger than PNP_IRQ_NRBjorn Helgaas
ACPI Extended Interrupt Descriptors can encode 32-bit interrupt numbers, so an interrupt number may exceed the size of the bitmap we use to track possible IRQ settings. To avoid corrupting memory, complain and ignore too-large interrupt numbers. There's similar code in pnpacpi_parse_irq_option(), but I didn't change that because the small IRQ descriptor can only encode IRQs 0-15, which do not exceed bitmap size. In the future, we could handle IRQ numbers greater than PNP_IRQ_NR by replacing the bitmap with a table or list. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: centralize resource option allocationsBjorn Helgaas
This patch moves all the option allocations (pnp_mem, pnp_port, etc) into the pnp_register_{mem,port,irq,dma}_resource() functions. This will make it easier to rework the option data structures. The non-trivial part of this patch is the IRQ handling. The backends have to allocate a local pnp_irq_mask_t bitmap, populate it, and pass a pointer to pnp_register_irq_resource(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: remove redundant pnp_can_configure() checkBjorn Helgaas
pnp_assign_resources() is static and the only caller checks pnp_can_configure() before calling it, so no need to do it again. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: make resource assignment functions return 0 (success) or -EBUSY (failure)Bjorn Helgaas
This patch doesn't change any behavior; it just makes the return values more conventional. This changes pnp_assign_dma() from a void function to one that returns an int, just like the other assignment functions. For now, at least, pnp_assign_dma() always returns 0 (success), so it appears to never fail, just like before. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: in debug resource dump, make empty list obviousBjorn Helgaas
If the resource list is empty, say that explicitly. Previously, it was confusing because often the heading was followed by zero resource lines, then some "add resource" lines from auto-assignment, so the "add" lines looked like current resources. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: improve resource assignment debugBjorn Helgaas
When we fail to assign an I/O or MEM resource, include the min/max in the debug output to help match it with the options. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: increase I/O port & memory option address sizesBjorn Helgaas
ACPI Address Space Descriptors can be up to 64 bits wide. We should keep track of the whole thing when parsing resource options, so this patch changes PNP port and mem option fields from "unsigned short" and "unsigned int" to "resource_size_t". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: introduce pnp_irq_mask_t typedefBjorn Helgaas
This adds a typedef for the IRQ bitmap, which should cause no functional change, but will make it easier to pass a pointer to a bitmap to pnp_register_irq_resource(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: make resource option structures private to PNP subsystemBjorn Helgaas
Nothing outside the PNP subsystem should need access to a device's resource options, so this patch moves the option structure declarations to a private header file. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: define PNP-specific IORESOURCE_IO_* flags alongside IRQ, DMA, MEMBjorn Helgaas
PNP previously defined PNP_PORT_FLAG_16BITADDR and PNP_PORT_FLAG_FIXED in a private header file, but put those flags in struct resource.flags fields. Better to make them IORESOURCE_IO_* flags like the existing IRQ, DMA, and MEM flags. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: whitespace/coding style fixesBjorn Helgaas
No functional change; just make a couple declarations consistent with the rest of the file. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: add pnp_possible_config() -- can a device could be configured this way?Bjorn Helgaas
As part of a heuristic to identify modem devices, 8250_pnp.c checks to see whether a device can be configured at any of the legacy COM port addresses. This patch moves the code that traverses the PNP "possible resource options" from 8250_pnp.c to the PNP subsystem. This encapsulation is important because a future patch will change the implementation of those resource options. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16PNP: dont sort by type in /sys/.../resourcesBjorn Helgaas
Rather than stepping through all IO resources, then stepping through all MMIO resources, etc., we can just iterate over the resource list once directly. This can change the order in /sys, e.g., # cat /sys/devices/pnp0/00:07/resources # OLD state = active io 0x3f8-0x3ff irq 4 # cat /sys/devices/pnp0/00:07/resources # NEW state = active irq 4 io 0x3f8-0x3ff The old code artificially sorted resources by type; the new code just lists them in the order we read them from the ISAPNP hardware or the BIOS. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16PNP: remove ratelimit on add resource failuresBjorn Helgaas
We used to have a fixed-size resource table. If a device had twenty resources when the table only had space for ten, we didn't need ten warnings, so we added the ratelimit. Now that we can dynamically allocate new resources, we should only get failures if the allocation fails. That should be rare enough that we don't need to ratelimit the messages. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:47:00 +0000