aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-07-10Input: xpad - fix report for dpad and inverted Y and RY axes on xbox 360Dmitry Torokhov
Make the driver report Y/RY up as positive value and down as negative. Also make DPAD mapping the same as classic xpad. Reported-by: Brian Magnuson <bdmagnuson@gmail.com> Tested-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - make xpad_play_effect() staticAdrian Bunk
xpad_play_effect() does not need to be global. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix check for succesful usb_buffer_allocJan Kratochvil
Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: grip-mp - use ARRAY_SIZEAndi Drebes
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wacom - add support for the new Bamboo tabletsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: add gpio-mouse driverHans-Christian Egtvedt
Adds support for simulating a mouse using GPIO lines. The driver needs an appropriate platform device to be created by architecture code. The driver has been tested on AT32AP7000 microprocessor using the ATSTK1000 development board. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: convert from class devices to standard devicesDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - add support for querying/changing keymapDmitry Torokhov
Implement getkeycode and setkeycode methods for the device so EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - convert to use input-polldevDmitry Torokhov
Switch to using input-polldev skeleton instead of implementing polling loop by itself. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - add LED supportEric Piel
Add support to wistron_btns for leds that come with the multimedia keys. Mail and wifi leds are supported, on laptops which have them. Depending on the laptop, wifi subsystem may control just the led, or both the led and the wifi card. Wifi led interface is activated only for the former type of laptops, as the latter type is already managed. Leds are controled by the interface in /sys/class/leds. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wriston - reduce polling frequencyEric Piel
Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of latency should be still fine for the user. In order to keep fluent the feeling when the user is pressing several keys in a raw (such as changing the volume), the frequency is increased for a short duration after a key is pressed. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - update driver versionRene van Paassen
Update credits and version number to 2.3 Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - rework the function key codeRene van Paassen
Function keys (also called macro keys) code corrected. Using a lastMacro variable to keep track of key currently pressed. This ensures proper resetting when dragging the pen in the drawing area or to another key. Also suppress sending pressure reports when over the macro key area. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - tolerate newlines in sysfs filesRene van Paassen
Now echo "some value" > /sys/......./somefile is also acceptable. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct the tool switching codeRene van Paassen
Now the old tool is remembered, and reset when a new tool is selected via the sysfs files. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use only absolute misc reportsRene van Paassen
To get an on - off reporting for proximity, absolute misc reports are used. The mixture of absolute and relative reports is awkward Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - put sensible warnings in probeRene van Paassen
Added warnings to the points where the tablet probe may fail Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use set_bit instead of bitwise orRene van Paassen
Have to use set_bit since some bit values are over 32, and bitwise or won't work on these. To be safe for the future too, use set_bit for all input dev capabilities Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - fix relative mode parsingMark Vytlacil
Corrections to relative mode, was looking at wrong byte Signed-off-by: Mark Vytlacil <mrv@wi.rr.com> Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - fixed mouse button definesRene van Paassen
Mouse button defines tested the wrong bits, now fixed Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct the proximity and validity checksRene van Paassen
Calculation of proximity bit and of data valid bits were reversed for stylus reports. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct documentation on reportsRene van Paassen
Small fix that corrects the documentation on the report byte format produced by the mouse Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use array to list all buttonsDmitry Torokhov
When setting up input device use an array to list all the buttons instead of setting every bit separately. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - kill aiptek_convert_from_2s_complement()Dmitry Torokhov
There is no reason to do that, just tell the compiler that we are dealing with signed values in buffer, that's it. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use maps in attributesDmitry Torokhov
Use maps to convert for strings to internal constants and vice versa in aiptek's sysfs attribute methods instead of open-coding it. This results in smaller code that is also easier to maintain. [Rene: fix a typo - stylys instead of stylus] Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - do not check for NULL in attribute methodsDmitry Torokhov
It makes no sense to check for NULL in attribute methods - we do usb_set_intfdata before creating attributes and once attributes have been removed we are guaranteed to not be called. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use attribute groupDmitry Torokhov
Use attribute group to simplify error handling and reduce code. [Rene: add missing NULL to properly terminate aiptek_attributes] Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - remove vendor and product attributes from sysfsDmitry Torokhov
They are already exported by input core; there is no need to do it twice. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - do not try to export associated event deviceDmitry Torokhov
Do not try to export via sysfs associated event device - it does not work when evdev is a module that is loaded after aiptek; also it pokes too deply into input core internals. Userspace should rely on udev to set up permanent device name for the tablet. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: psmouse - add support for Cortron PS/2 TrackballsAristeu Rozanski
Cortron PS/2 Trackballs (700-0001A) report the 4th button using the 4th bit of the first packet (yes, it breaks the standard PS/2 protocol). This patch adds an extra protocol to generate BTN_SIDE based on the 4th bit. There's no way to detect those trackballs using any kind of special sequence, thus the protocol must be activated explicitely by writing into 'protocol' sysfs attribute: echo -n "cortps" > /sys/devices/platform/i8042/serio1/protocol Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add Xbox360 gamepad rumble supportJan Kratochvil
Implementation is using force feedback support for memoryless devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add support for Xbox 360 gamepadJan Kratochvil
Xbox 360 gamepad is slightly different then the previous model so it has its own version of process_packet method. Detection of this new device relies on USB_DEVICE_INTERFACE_PROTOCOL macro. This device got vendor specific subclass so it can't be matched with USB_INTERFACE_INFO and we need only one interface protocol from four availaible. It means USB_DEVICE can't be used either. Added xpad360_btn structure with additional buttons for x360 gamepad. Added xtype into xpad_device structure to distinguish between different types of xbox devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (31 commits) firewire: fw-sbp2: fix DMA mapping of management ORBs firewire: fw-sbp2: fix DMA mapping of command ORBs firewire: fw-sbp2: fix DMA mapping of S/G tables firewire: fw-sbp2: add a boundary check firewire: fw-sbp2: correctly align page tables firewire: fw-sbp2: memset wants string.h firewire: fw-sbp2: use correct speed in sbp2_agent_reset firewire: fw-sbp2: correctly dereference by container_of firewire: Document userspace ioctl interface. firewire: fw-sbp2: implement nonexclusive login firewire: fw-sbp2: let SCSI shutdown commands through before logout firewire: fw-sbp2: implement max sectors limit for some old bridges firewire: simplify a struct type firewire: support S100B...S400B and link slower than PHY firewire: optimize gap count with 1394b leaf nodes firewire: remove unused macro firewire: missing newline in printk firewire: fw-sbp2: remove unused struct member ieee1394: remove old isochronous ABI ieee1394: sbp2: change some module parameters from int to bool ...
2007-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: handle cases of volume knobs generating relative values HID: Logitech keyboard 0xc311 needs reset leds quirk HID: support for logitech cordless desktop LX500 special mapping HID: fix autocentering of PID devices HID: separate quirks for report descriptor fixup HID: Add NOGET quirk for all NCR devices HID: support for Petalynx Maxter remote control HID: fix mismatch between hid-input HUT find/search mapping and the HUT HID: support for Gameron dual psx adaptor USB HID: avoid flush_scheduled_work() HID: Use menuconfig objects HID: force hid-input for Microsoft SideWinder GameVoice device HID: input mapping for Chicony KU-0418 tactical pad HID: make debugging output runtime-configurable
2007-07-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (75 commits) Ethernet driver for EISA only SNI RM200/RM400 machines Extract chip specific code out of lasi_82596.c ehea: Whitespace cleanup pasemi_mac: Fix TX interrupt threshold spidernet: Replace literal with const r8169: perform RX config change after mac filtering r8169: mac address change support r8169: display some extra debug information during startup r8169: add endianess annotations to [RT]xDesc r8169: align the IP header when there is no DMA constraint r8169: add bit description for the TxPoll register r8169: cleanup r8169: remove the media option r8169: small 8101 comment r8169: confusion between hardware and IP header alignment r8169: merge with version 8.001.00 of Realtek's r8168 driver r8169: merge with version 6.001.00 of Realtek's r8169 driver r8169: prettify mac_version r8169: populate the hw_start handler for the 8110 r8169: populate the hw_start handler for the 8168 ...
2007-07-10firewire: fw-sbp2: fix DMA mapping of management ORBsStefan Richter
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: fix DMA mapping of command ORBsStefan Richter
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: fix DMA mapping of S/G tablesStefan Richter
- The CPU must not touch the buffer after it was DMA-mapped. - The size argument of dma_unmap_single(...page_table...) was bogus. - Move a comment closer to the code to which it refers to. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: add a boundary checkStefan Richter
Add rudimentary check for the case that the page table overflows due to merging of s/g elements by the IOMMU. This would have lead to overwriting of arbitrary memory. After this change I expect that an offending command will be unsuccessfully retried until the scsi_device is taken offline by SCSI core. It's a border case and not worth to implement a recovery strategy. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: correctly align page tablesStefan Richter
This is required per SBP-2 clause 5.2. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: memset wants string.hStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: use correct speed in sbp2_agent_resetStefan Richter
noticed by Jay Fenlason Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: correctly dereference by container_ofJay Fenlason
Replace a cast with a container_of(). As long as nobody reorders the structure elements, they do the same thing, but container_of() is more readable. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added complete_command_orb) Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: implement nonexclusive loginStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: let SCSI shutdown commands through before logoutStefan Richter
This affects of course only the "soft shutdown" case, e.g. "modprobe -r firewire-sbp2", while it doesn't matter for hot unplug. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: implement max sectors limit for some old bridgesStefan Richter
This currently only affects one bridge in the hardwired blacklist. I don't own one of those, hence haven't tested it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10firewire: simplify a struct typeStefan Richter
cleanup after "firewire: support S100B...S400B and link slower than PHY" Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: support S100B...S400B and link slower than PHYStefan Richter
Use a speed probe to determine the speed over 1394b buses and of nodes which report a link speed less than their PHY speed. Log the effective maximum speed of newly created nodes in dmesg. Also, read the config ROM (except bus info block) at the maximum speed rather than S100. This isn't a real optimization though because we still only use quadlet read requests for the entire ROM. The patch also adds support for S1600 and S3200, although such hardware does not exist yet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: optimize gap count with 1394b leaf nodesStefan Richter
Table-based gap count optimization cannot be used if 1394b repeater PHYs are present. But it does work with 1394b leaf nodes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: remove unused macroStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 18:15:28 +0000