aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-25ACPI: remove acpi_device.flags.compatible_idsBjorn Helgaas
We now keep a single list of IDs that includes both the _HID and any _CIDs. We no longer need to keep track of whether the device has a _CID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: maintain a single list of _HID and _CID IDsBjorn Helgaas
There's no need to treat _HID and _CID differently. Keeping them in a single list makes code that uses the IDs a little simpler because it can just traverse the list rather than checking "do we have a HID?", "do we have any CIDs?" Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: make sure every acpi_device has an IDBjorn Helgaas
This makes sure every acpi_device has at least one ID. If we build an acpi_device for a namespace node with no _HID or _CID, we sometimes synthesize an ID like "LNXCPU" or "LNXVIDEO". If we don't even have that, give it a default "device" ID. Note that this means things like: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:04/device:00 (a PCI slot SxFy device) will have "hid" and "modprobe" entries, where they didn't before. These aren't very useful (a HID of "device" doesn't tell you what *kind* of device it is, so it doesn't help find a driver), but I don't think they're harmful. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: use acpi_device_hid() when possibleBjorn Helgaas
Use acpi_device_hid() rather than accessing acpi_device.pnp.hardware_id directly. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: fix synthetic HID for \_SB_Bjorn Helgaas
This makes \_SB_ show up as /sys/devices/LNXSYSTM:00/LNXSYBUS:00 rather than "device:00". This has been broken for a loooong time (at least since 2.6.13) because device->parent is an acpi_device pointer, not a handle. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: handle re-enumeration, when acpi_devices might already existBjorn Helgaas
acpi_bus_scan() traverses the namespace to enumerate devices and uses acpi_add_single_object() to create acpi_devices. When the platform notifies us of a hot-plug event, we need to traverse part of the namespace again to figure out what appeared or disappeared. (We don't yet call acpi_bus_scan() during hot-plug, but I plan to do that in the future.) This patch makes acpi_add_single_object() notice when we already have an acpi_device, so we don't need to make a new one. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: factor out device type and status checkingBjorn Helgaas
This patch adds acpi_bus_type_and_status(), which determines the type of the object and whether we want to build an acpi_device for it. If it is acpi_device-worthy, it returns the type and the device's current status. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add acpi_bus_get_status_handle()Bjorn Helgaas
Add acpi_bus_get_status_handle() so we can get the status of a namespace object before building a struct acpi_device. This removes a use of "device->flags.dynamic_status", a cached indicator of whether _STA exists. It seems simpler and more reliable to just evaluate _STA and catch AE_NOT_FOUND errors. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: use acpi_walk_namespace() to enumerate devicesBjorn Helgaas
acpi_bus_scan() currently walks the namespace manually. This patch changes it to use acpi_walk_namespace() instead. Besides removing some complicated code, this means we take advantage of the namespace locking done by acpi_walk_namespace(). The locking isn't so important at boot-time, but I hope to eventually use this same path to handle hot-addition of devices, when it will be important. Note that acpi_walk_namespace() does not actually visit the starting node first, so we need to do that by hand first. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPEBjorn Helgaas
We can identify the root of the ACPI device tree by the fact that it has no parent. This is simpler than passing around ACPI_BUS_TYPE_SYSTEM and will help remove special treatment of the device tree root. Currently, we add the root by hand with ACPI_BUS_TYPE_SYSTEM. If we traverse the tree treating the root as just another device and use acpi_get_type(), the root shows up as ACPI_TYPE_DEVICE. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: enumerate namespace before adding functional fixed hardware devicesBjorn Helgaas
This patch changes the order so we enumerate in the "root, namespace, functional fixed" order instead of the "root, functional fixed, namespace" order. When I change acpi_bus_scan() to use acpi_walk_namespace(), it will use the former order, so this patch isolates the order change for bisectability. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: convert acpi_bus_scan() to operate on an acpi_handleBjorn Helgaas
This patch changes acpi_bus_scan() to take an acpi_handle rather than an acpi_device pointer. I plan to use acpi_bus_scan() in the hotplug path, and I'd rather not assume that notifications only go to nodes that already have acpi_devices. This will also help remove the special case for adding the root node. We currently add the root by hand before acpi_bus_scan(), but using a handle here means we can start the acpi_bus_scan() directly with the root even though it doesn't have an acpi_device yet. Note that acpi_bus_scan() currently adds and/or starts the *children* of its device argument. It doesn't do anything with the device itself. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add acpi_bus_get_parent() and remove "parent" argumentsBjorn Helgaas
This patch adds acpi_bus_get_parent(), which ascends the namespace until it finds a parent with an acpi_device. Then we use acpi_bus_get_parent() in acpi_add_single_object(), so callers don't have to figure out or keep track of the parent acpi_device. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove unnecessary argument checkingBjorn Helgaas
acpi_add_single_object() is static, and all callers supply a valid "child" argument, so we don't need to check it. This patch also remove some unnecessary initializations. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove redundant "type" argumentsBjorn Helgaas
We now save the ACPI bus "device_type" in the acpi_device structure, so we don't need to pass it around explicitly anymore. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device_set_context() "type" argumentBjorn Helgaas
We only pass the "type" to acpi_device_set_context() so we know whether the device has a handle to which we can attach the acpi_device pointer. But it's safer to just check for the handle directly, since it's in the acpi_device already. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: use device_type rather than comparing HIDBjorn Helgaas
Check the acpi_device device_type rather than the HID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: save device_type in acpi_deviceBjorn Helgaas
Most uses of the ACPI bus device_type (ACPI_BUS_TYPE_DEVICE, ACPI_BUS_TYPE_POWER, etc) are during device initialization, but we do need it later for notify handler installation, since that is different for fixed hardware devices vs. namespace devices. This patch saves the device_type in the acpi_device structure, so we can check that rather than comparing against the _HID string. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove redundant "handle" and "parent" argumentsBjorn Helgaas
In several cases, functions take handle and parent device pointers in addition to acpi_device pointers. But the acpi_device structure contains both the handle and the parent pointer, so it's pointless and error-prone to pass them all. This patch removes the unnecessary "handle" and "parent" arguments. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove unused acpi_bus_scan_fixed() argumentBjorn Helgaas
We never use the "root" argument, so just remove it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add debug for device additionBjorn Helgaas
Add debug output for adding an ACPI device. Enable this with "acpi.debug_layer=0x00010000" (ACPI_BUS_COMPONENT). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPICA: fixup after acpi_get_object_info() changeBjorn Helgaas
Commit 15b8dd53f5ffa changed info->hardware_id from a static array to a pointer. If hardware_id is non-NULL, it points to a NULL-terminated string, so we don't need to terminate it explicitly. However, it may be NULL; in that case, we *can't* add a NULL terminator. This causes a NULL pointer dereference oops for devices without _HID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Bob Moore <robert.moore@intel.com> CC: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh_mobile_ceu_camera: fix compile breakage, caused by a bad merge sh: Add support DMA Engine to SH7780 sh: Add support DMA Engine to SH7722 sh: enable onenand support in kfr2r09 defconfig. sh: update defconfigs. sh: add FSI driver support for ms7724se sh: Fix up uninitialized variable use caught by gcc 4.4. sh: Handle unaligned 16-bit instructions on SH-2A. sh: mach-ecovec24: Add active low setting for sh_eth sh: includecheck fix: dwarf.c
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits) genetlink: fix netns vs. netlink table locking (2) 3c59x: Get rid of "Trying to free already-free IRQ" tunnel: eliminate recursion field ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2 net: fix htmldocs sunrpc, clnt.c Phonet: error on broadcast sending (unimplemented) Phonet: fix race for port number in concurrent bind() pktgen: better scheduler friendliness pktgen: T_TERMINATE flag is unused ipv4: check optlen for IP_MULTICAST_IF option ath9k: Initialize txgain and rxgain for newer AR9287 chipsets. iwlagn: fix panic in iwl{5000,4965}_rx_reply_tx ath9k: Fix RFKILL bugs drivers/net/wireless: Use usb_endpoint_dir_out cfg80211: don't overwrite privacy setting wl12xx: fix kconfig/link errors rt2x00: fix the definition of rt2x00crypto_rx_insert_iv iwlwifi: reduce noise when skb allocation fails iwlwifi: do not send sync command while holding spinlock mac80211: fix DTIM setting ...
2009-09-25[WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.Thierry Reding
This patch adds support for the watchdog timer on Avionic Design Xanthos boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-25sh_mobile_ceu_camera: fix compile breakage, caused by a bad mergeGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: Fix build of cpm_uart due to core changes powerpc/8xx: Fix regression introduced by cache coherency rewrite powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx powerpc/mm: Fix 40x and 8xx vs. _PAGE_SPECIAL powerpc: Cleanup linker script using new linker script macros. powerpc: Fix ibm,client-architecture-support printout powerpc: Increase NODES_SHIFT on 64bit from 4 to 8 powerpc/perf_counter: Fix vdso detection powerpc: Move 64bit heap above 1TB on machines with 1TB segments powerpc: Change archdata dma_data to a union powerpc: Rename get_dma_direct_offset get_dma_offset powerpc/mm: Remove duplicated #include powerpc/book3e-64: Remove duplicated #include powerpc: Check for unsupported relocs when using CONFIG_RELOCATABLE powerpc/pmc: Don't access lppaca on Book3E powerpc: kmalloc failure ignored in vio_build_iommu_table() hvc_console: Provide (un)locked version for hvc_resize()
2009-09-24Merge branch 'for-linus' of git://repo.or.cz/cris-mirrorLinus Torvalds
* 'for-linus' of git://repo.or.cz/cris-mirror: CRIS: Cleanup linker script using new linker script macros. ARRAY_SIZE changes CRIS: convert to asm-generic/hardirq.h CRISv10: Don't autonegotiate if autonegotiation is off CRIS: fix defconfig build failure CRIS: add pgprot_noncached
2009-09-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits) ARM: 5719/1: [AT91] Fix AC97 breakage ARM: 5721/1: MMCI enable the use of a regulator ARM: 5720/1: Move MMCI header to amba include dir ARM: 5718/1: Sane busids for RealView board components ARM: 5715/1: Make kprobes unregistration SMP safe ARM: 5711/1: locomo.c: CodingStyle cleanups ARM: 5710/1: at91: add AC97 support to at91sam9rl and at91sam9rlek board ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and at91sam9m10g45ek board ARM: 5621/1: at91/dmaengine: integration of at_hdmac driver in at91sam9g45 series ARM: 5620/1: at91/dmaengine: integration of at_hdmac driver in at91sam9rl ARM: Add support for checking access permissions on prefetch aborts ARM: Separate out access error checking ARM: Ensure correct might_sleep() check in pagefault path ARM: Update page fault handling for new OOM techniques ARM: Provide definitions and helpers for decoding the FSR register ARM: 5712/1: SA1100: initialise spinlock in DMA code ARM: s3c: fix check of index into s3c_gpios[] ARM: spitz: fix touchscreen max presure ARM: STMP3xxx: deallocation with negative index of descriptors[] Thumb-2: Correctly handle undefined instructions in the kernel ...
2009-09-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Don't turn on carrier for a non-active port IB/mthca: Fix access to freed memory in catastrophic event handling mlx4_core: Pass cache line size to device FW RDMA/nes: Remove duplicate .ndo_set_mac_address field initialization IB/mad: Fix lock-lock-timer deadlock in RMPP code
2009-09-243c59x: Get rid of "Trying to free already-free IRQ"Anton Vorontsov
Following trace pops up if we try to suspend with 3c59x ethernet NIC brought down: root@b1:~# ifconfig eth16 down root@b1:~# echo mem > /sys/power/state ... 3c59x 0000:00:10.0: suspend 3c59x 0000:00:10.0: PME# disabled Trying to free already-free IRQ 48 ------------[ cut here ]------------ Badness at c00554e4 [verbose debug info unavailable] NIP: c00554e4 LR: c00554e4 CTR: c019a098 REGS: c7975c60 TRAP: 0700 Not tainted (2.6.31-rc4) MSR: 00021032 <ME,CE,IR,DR> CR: 28242422 XER: 20000000 TASK = c79cb0c0[1746] 'bash' THREAD: c7974000 ... NIP [c00554e4] __free_irq+0x108/0x1b0 LR [c00554e4] __free_irq+0x108/0x1b0 Call Trace: [c7975d10] [c00554e4] __free_irq+0x108/0x1b0 (unreliable) [c7975d30] [c005559c] free_irq+0x10/0x24 [c7975d40] [c01e21ec] vortex_suspend+0x70/0xc4 [c7975d60] [c017e584] pci_legacy_suspend+0x58/0x100 This is because the driver manages interrupts without checking for netif_running(). Though, there are few other issues with suspend/resume in this driver. The intention of calling free_irq() in suspend() was to avoid any possible spurious interrupts (see commit 5b039e681b8c5f30aac9cc04385 "3c59x PM fixes"). But, - On resume, the driver was requesting IRQ just after pci_set_master(), but before vortex_up() (which actually resets 3c59x chips). - Issuing free_irq() on a shared IRQ doesn't guarantee that a buggy HW won't trigger spurious interrupts in another driver that requested the same interrupt. So, if we want to protect from unexpected interrupts, then on suspend we should issue disable_irq(), not free_irq(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2Sebastian Haas
The driver mapped only 128 bytes of the CAN controller address space when a CPC-PCI v2 was detected (incl. CPC-104P). This patch will fix it by always mapping the whole address space (4096 bytes on all boards) of the corresponding PCI BAR. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
2009-09-24Merge branch 'origin' into for-linusRussell King
Conflicts: MAINTAINERS
2009-09-24Merge branches 'ipoib', 'mad', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier
2009-09-24IPoIB: Don't turn on carrier for a non-active portMoni Shoua
Multicast joins can succeed even if the IB port is down. This happens when the SM runs on the same port with the requesting port. However, IPoIB calls netif_carrier_on() when the join of the broadcast group succeeds, without caring about the state of the IB port. The result is an IPoIB interface in RUNNING state but without an active IB port to support it. If a bonding interface uses this IPoIB interface as a slave it might not detect that this slave is almost useless and failover functionality will be damaged. The fix checks the state of the IB port in the carrier_task before calling netif_carrier_on(). Adresses: https://bugs.openfabrics.org/show_bug.cgi?id=1726 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24IB/mthca: Fix access to freed memory in catastrophic event handlingJack Morgenstein
catas_reset() uses a pointer to mthca_dev, but mthca_dev is not valid after the call to __mthca_restart_one(). Based on a similar patch for mlx4 (634354d7, "mlx4: Fix access to freed memory") by Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24mlx4_core: Pass cache line size to device FWEli Cohen
ConnectX can work more efficiently if the CPU cache line size is passed to it with the INIT_HCA firmware command. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24RDMA/nes: Remove duplicate .ndo_set_mac_address field initializationJulia Lawall
The definition of nes_netdev_ops has initializations of a local function and eth_mac_addr for its ndo_set_mac_address field. This change uses only the local function. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column): cocci.print_main(fld,p0) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-24Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits) drm/i915: Handle ERESTARTSYS during page fault drm/i915: Warn before mmaping a purgeable buffer. drm/i915: Track purged state. drm/i915: Remove eviction debug spam drm/i915: Immediately discard any backing storage for uneeded objects drm/i915: Do not mis-classify clean objects as purgeable drm/i915: Whitespace correction for madv drm/i915: BUG_ON page refleak during unbind drm/i915: Search harder for a reusable object drm/i915: Clean up evict from list. drm/i915: Add tracepoints drm/i915: framebuffer compression for GM45+ drm/i915: split display functions by chip type drm/i915: Skip the sanity checks if the current relocation is valid drm/i915: Check that the relocation points to within the target drm/i915: correct FBC update when pipe base update occurs drm/i915: blacklist Acer AspireOne lid status ACPI: make ACPI button funcs no-ops if not built in drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks drm/i915: intel_display.c handle latency variable efficiently ... Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
2009-09-24Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits) x86/PCI: make 32 bit NUMA node array int, not unsigned char x86/PCI: default pcibus cpumask to all cpus if it lacks affinity MAINTAINTERS: remove hotplug driver entries PCI: pciehp: remove slot capabilities definitions PCI: pciehp: remove error message definitions PCI: pciehp: remove number field PCI: pciehp: remove hpc_ops PCI: pciehp: remove pci_dev field PCI: pciehp: remove crit_sect mutex PCI: pciehp: remove slot_bus field PCI: pciehp: remove first_slot field PCI: pciehp: remove slot_device_offset field PCI: pciehp: remove hp_slot field PCI: pciehp: remove device field PCI: pciehp: remove bus field PCI: pciehp: remove slot_num_inc field PCI: pciehp: remove num_slots field PCI: pciehp: remove slot_list field PCI: fix VGA arbiter header file PCI: Disable AER with pci=nomsi ... Fixed up trivial conflicts in MAINTAINERS
2009-09-24Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits) microblaze: Disable heartbeat/enable emaclite in defconfigs microblaze: Support simpleImage.dts make target microblaze: Fix _start symbol to physical address microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C microblaze: Actually show KiB rather than pages in "Freeing initrd memory:" microblaze: Support ptrace syscall tracing. microblaze: Updated CPU version and FPGA family codes in PVR microblaze: Generate correct signal and siginfo for integer div-by-zero microblaze: Don't be noisy when userspace causes hardware exceptions microblaze: Remove ipc.h file which points to non-existing asm-generic file microblaze: Clear sticky FSR register after generating exception signals microblaze: Ensure CPU usermode is set on new userspace processes microblaze: Use correct kbuild variable KBUILD_CFLAGS microblaze: Save and restore msr in hw exception microblaze: Add architectural support for USB EHCI host controllers microblaze: Implement include/asm/syscall.h. microblaze: Improve checking mechanism for MSR instruction microblaze: Add checking mechanism for MSR instruction ...
2009-09-24Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: (97 commits) md: raid-1/10: fix RW bits manipulation md: remove unnecessary memset from multipath. md: report device as congested when suspended md: Improve name of threads created by md_register_thread md: remove sparse warnings about lock context. md: remove sparse waring "symbol xxx shadows an earlier one" async_tx/raid6: add missing dma_unmap calls to the async fail case ioat3: fix uninitialized var warnings drivers/dma/ioat/dma_v2.c: fix warnings raid6test: fix stack overflow ioat2: clarify ring size limits md/raid6: cleanup ops_run_compute6_2 md/raid6: eliminate BUG_ON with side effect dca: module load should not be an error message ioat: driver version 4.0 dca: registering requesters in multiple dca domains async_tx: remove HIGHMEM64G restriction dmaengine: sh: Add Support SuperH DMA Engine driver dmaengine: Move all map_sg/unmap_sg for slave channel to its client fsldma: Add DMA_SLAVE support ...
2009-09-24Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (13039): dib0700: not building CONFIG_DVB_TUNER_DIB0070 breaks compilation V4L/DVB (13038): dvbdev: Remove an anoying/uneeded warning V4L/DVB (13037): go7007: Revert compatibility code added at the wrong place media: video: Fix build in saa7164
2009-09-24drivers/usb/serial/sierra.c: fix CONFIG_PM=n buildAndrew Morton
drivers/usb/serial/sierra.c: In function 'sierra_suspend': drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm' Repairs commit e6929a9020acbeb04d9a3ad9a88234c15be808fd Author: Oliver Neukum <oliver@neukum.org> Date: Fri Sep 4 23:19:53 2009 +0200 USB: support for autosuspend in sierra while online Cc: Greg KH <greg@kroah.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24drivers/vlynq/vlynq.c: fix resource size off by 1 errorJulia Lawall
In this case, the calls to request_mem_region, ioremap, and release_mem_region all have a consistent length argument, len, but since in other files (res->end - res->start) + 1, equivalent to resource_size(res), is used for a resource-typed structure res, one could consider whether the same should be done here. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24gru: allocation may fail in quicktest1()Roel Kluin
The allocation may fail. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24gru: use proc_create()Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24memstick: move dev_dbgJiri Slaby
id_reg.if_mode might be unitialized when (*mrq)->error is nonzero. move dev_dbg() inside the if so that we are sure we can use id_reg values. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-06 10:49:29 +0000