aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-09i2c-mpc: do not allow interruptions when waiting for I2C to completeTimur Tabi
The i2c_wait() function is using wait_event_interruptible_timeout() to wait for the I2C controller to signal that it has completed an I2C bus operation. If the process that causes the I2C operation terminated abruptly, the wait will be interrupted, returning an error. It is better to let the I2C operation finished before the process exits. It is safe to use wait_event_timeout() instead, because the timeout will allow the process to exit if the I2C bus hangs. It's also better to allow the I2C operation to finish, because unacknowledged I2C operations can cause the I2C bus to hang. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-18Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/include/asm/pgtable-ppc32.h
2009-02-17Add support for VT6415 PCIE PATA IDE Host ControllerZlatko Calusic
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17USB/PCI: Fix resume breakage of controllers behind cardbus bridgesRafael J. Wysocki
If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu: fix Intel IOMMU write-buffer flushing futex: fix reference leak Trivial conflicts fixed manually in drivers/pci/intel-iommu.c
2009-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Documentation: fix minor PCIe HOWTO thinko PCI: fix missing kernel-doc and typos PCI: fix struct pci_platform_pm_ops kernel-doc PCI: fix rom.c kernel-doc warning PCI/MSI: fix msi_mask() shift fix
2009-02-17Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_nv: give up hardreset on nf2 libata-sff: fix 32-bit PIO ATAPI regression
2009-02-17Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: MAINTAINERS: Switch hdaps to Frank Seidel hwmon: Fix ACPI resource check error handling hwmon: (f71882fg) Hide misleading error message
2009-02-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10626): ivtv: fix regression in get sliced vbi format V4L/DVB (10625): ivtv: fix decoder crash regression V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time. V4L/DVB (10572): Revert commit dda06a8e4610757def753ee3a541a0b1a1feb36b V4L/DVB (10533): fix LED status output V4L/DVB (10532): Correction of Stereo detection/setting and signal strength indication V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup V4L/DVB (10516a): zoran: Update MAINTAINERS entry
2009-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix bus endianity in file2alias HID: move tmff and zpff devices from ignore_list to blacklist HID: unlock properly on error paths in hidraw_ioctl() HID: blacklist Powercom USB UPS
2009-02-17Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Fix sm501_register_gpio section mismatch mfd: fix sm501 section mismatches mfd: terminate pcf50633 i2c_device_id list mfd: Ensure all WM8350 IRQs are masked at startup mfd: fix htc-egpio iomem resource handling using resource_size mfd: Fix TWL4030 build on some ARM variants mfd: wm8350 tries reaches -1 mfd: Mark WM835x USB_SLV_500MA bit as accessible mfd: Improve diagnostics for WM8350 ID register probe mfd: Initialise WM8350 interrupts earlier mfd: Fix egpio kzalloc return test
2009-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2
2009-02-17Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: wusb: whci-hcd: always lock whc->lock with interrupts disabled
2009-02-17Fix Intel IOMMU write-buffer flushingDavid Woodhouse
This is the cause of the DMA faults and disk corruption that people have been seeing. Some chipsets neglect to report the RWBF "capability" -- the flag which says that we need to flush the chipset write-buffer when changing the DMA page tables, to ensure that the change is visible to the IOMMU. Override that bit on the affected chipsets, and everything is happy again. Thanks to Chris and Bhavesh and others for helping to debug. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Chris Wright <chrisw@sous-sol.org> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17hwmon: Fix ACPI resource check error handlingHans de Goede
This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-02-17hwmon: (f71882fg) Hide misleading error messageJean Delvare
If the F71882FG chip is at address 0x4e, then the probe at 0x2e will fail with the following message in the logs: f71882fg: Not a Fintek device This is misleading because there is a Fintek device, just at a different address. So I propose to degrade this message to a debug message. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
2009-02-17V4L/DVB (10626): ivtv: fix regression in get sliced vbi formatHans Verkuil
The new v4l2_subdev_call used s_fmt instead of g_fmt. Thanks-to: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10625): ivtv: fix decoder crash regressionHans Verkuil
The video_ioctl2 conversion of ivtv in kernel 2.6.27 introduced a bug causing decoder commands to crash. The decoder commands should have been handled from the video_ioctl2 default handler, ensuring correct mapping of the argument between user and kernel space. Unfortunately they ended up before the video_ioctl2 call, causing random crashes. Thanks to hannes@linus.priv.at for testing and helping me track down the cause! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time.Adam Baker
If a device using the gspca framework is unplugged while it is still streaming then the call that is used to free the URBs that have been allocated occurs after the pointer it uses becomes invalid at the end of gspca_disconnect. Make another cleanup call in gspca_disconnect while the pointer is still valid (multiple calls are OK as destroy_urbs checks for pointers already being NULL. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10572): Revert commit dda06a8e4610757def753ee3a541a0b1a1feb36bMauro Carvalho Chehab
On Mon, 02 Feb 2009, Hartmut wrote: This change set is wrong. The affected functions cannot be called from an interrupt context, because they may process large buffers. In this case, interrupts are disabled for a long time. Functions, like dvb_dmx_swfilter_packets(), could be called only from a tasklet. This change set does hide some strong design bugs in dm1105.c and au0828-dvb.c. Please revert this change set and do fix the bugs in dm1105.c and au0828-dvb.c (and other files). On Sun, 15 Feb 2009, Oliver Endriss wrote: This changeset _must_ be reverted! It breaks all kernels since 2.6.27 for applications which use DVB and require a low interrupt latency. It is a very bad idea to call the demuxer to process data buffers with interrupts disabled! On Mon, 16 Feb 2009, Trent Piepho wrote: I agree, this is bad. The demuxer is far too much work to be done with IRQs off. IMHO, even doing it under a spin-lock is excessive. It should be a mutex. Drivers should use a work-queue to feed the demuxer. Thank you for testing this changeset and discovering the issues on it. Cc: Trent Piepho <xyzzy@speakeasy.org> Cc: Hartmut <e9hack@googlemail.com> Cc: Oliver Endriss <o.endriss@gmx.de> Cc: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10533): fix LED status outputTobias Lorenz
This patch closes one of my todos that was since long on my list. Some people reported clicks and glitches in the audio stream, correlated to the LED color changing cycle. Thanks to Rick Bronson <rick@efn.org>. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10532): Correction of Stereo detection/setting and signal strength ↵Tobias Lorenz
indication Thanks to Bob Ross <pigiron@gmx.com> - correction of stereo detection/setting - correction of signal strength indicator scaling Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17V4L/DVB (10527): tuner: fix TUV1236D analog/digital setupMauro Carvalho Chehab
As reported by David Engel <david@istwok.net>, ATSC115 doesn't work fine with mythtv. This software opens both analog and dvb interfaces of saa7134. What happens is that some tuner commands are going to the wrong place, as shown at the logs: Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: using tuner params #0 (ntsc) Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01 Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808 Feb 12 20:37:48 opus kernel: tuner 1-0061: tv freq set to 67.25 Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: using tuner params #0 (ntsc) Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01 Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808 Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: tv 0x07 0x10 0xce 0x01 Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: tv 0x07 0x10 0xce 0x01 This happens due to a hack at TUV1236D analog setup, where it replaces tuner address, at 0x61 for 0x0a, in order to save a few memory bytes. The code assumes that nobody else would try to access the tuner during that setup, but the point is that there's no lock to protect such access. So, this opens the possibility of race conditions to happen. Instead of hacking tuner address, this patch uses a temporary var with the proper tuner value to be used during the setup. This should save the issue, although we should consider to write some analog/digital lock at saa7134 driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17HID: move tmff and zpff devices from ignore_list to blacklistAnssi Hannula
The devices handled by hid-tmff and hid-zpff were added in the hid_ignore_list[] instead of hid_blacklist[] in hid-core.c, thus disabling them completely. hid_ignore_list[] causes hid layer to skip the device, while hid_blacklist[] indicates there is a specific driver in hid bus. Re-enable the devices by moving them to the correct list. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17HID: unlock properly on error paths in hidraw_ioctl()Dan Carpenter
We can't return immediately because lock_kernel() is held. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17HID: blacklist Powercom USB UPSMichael Tokarev
For quite some time users with various UPSes from Powercom were forced to play magic with bind/unbind in /sys in order to be able to see the UPSes. The beasts does not work as HID devices, even if claims to do so. cypress_m8 driver works with the devices instead, creating a normal serial port with which normal UPS controlling software works. The manufacturer confirmed the upcoming models with proper HID support will have different device IDs. In any way, it's wrong to have two completely different modules for one device in kernel. Blacklist the device in HID (add it to hid_ignore_list) to stop this mess, finally. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17mfd: Fix sm501_register_gpio section mismatchRakib Mullick
WARNING: drivers/mfd/built-in.o(.text+0x1706): Section mismatch in reference from the function sm501_register_gpio() to the function .devinit.text:sm501_gpio_register_chip() The function sm501_register_gpio() references the function __devinit sm501_gpio_register_chip(). This is often because sm501_register_gpio lacks a __devinit annotation or the annotation of sm501_gpio_register_chip is wrong. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: fix sm501 section mismatchesAlexey Dobriyan
drv => driver renaming is needed otherwise modpost will spit false positives re pointing to __devinit function from regular data. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: terminate pcf50633 i2c_device_id listJean Delvare
The i2c_device_id list is supposed to be zero-terminated. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Balaji Rao <balajirrao@openmoko.org> Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-02-17mfd: Ensure all WM8350 IRQs are masked at startupMark Brown
The IRQs might have been left enabled in hardware, generating spurious IRQs before the drivers have registered. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: fix htc-egpio iomem resource handling using resource_sizePhilipp Zabel
Fixes an off-by-one error in the iomem resource mapping. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Fix TWL4030 build on some ARM variantsMark Brown
Many ARM platforms do not provide a mach/cpu.h so rather than guarding the use of that header with CONFIG_ARM guard it with the guards used when testing for the OMAP variants in the body of the code. Signed-off-by: Mark Brown <broonie@sirena.org.uk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: wm8350 tries reaches -1Roel Kluin
With a postfix decrement tries will reach -1 rather than 0, so the warning will not be issued even upon timeout. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Mark WM835x USB_SLV_500MA bit as accessibleMark Brown
The code is out of sync with the silicon. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Improve diagnostics for WM8350 ID register probeMark Brown
Check the return value of the device I/O functions when reading the ID registers so we can provide a more useful diagnostic when we're having trouble talking to the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Initialise WM8350 interrupts earlierMark Brown
Ensure that the interrupt handling is configured before we do platform specific init. This allows the platform specific initialisation to configure things which use interrupts safely. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Fix egpio kzalloc return testJulia Lawall
Since ei is already known to be non-NULL, I assume that what was intended was to test the result of kzalloc. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-16sata_nv: give up hardreset on nf2Tejun Heo
Kernel bz#12176 reports that nf2 hardreset simply doesn't work. Give up. Argh... Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Robert Hancock <hancockr@shaw.ca> Reported-by: Saro <saro_v@hotmail.it> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-16libata-sff: fix 32-bit PIO ATAPI regressionSergei Shtylyov
Commit 871af1210f13966ab911ed2166e4ab2ce775b99d (libata: Add 32bit PIO support) has caused all kinds of errors on the ATAPI devices, so it has been empirically proven that one shouldn't try to read/write an extra data word when a device is not expecting it already. "Don't do it then"; however, still use a chance to do 32-bit read/write one last time when there are exactly 3 trailing bytes. Oh, and stop pointlessly swapping the bytes to and fro on big-endian machines by using io*_rep() accessors which shouldn't byte-swap. This patch should fix the kernel.org bug #12609. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-16wusb: whci-hcd: always lock whc->lock with interrupts disabledDavid Vrabel
Always lock whc->lock with spin_lock_irq() or spin_lock_irqsave(). Signed-off-by: David Vrabel <david.vrabel@csr.com>
2009-02-14iommu: fix Intel IOMMU write-buffer flushingDavid Woodhouse
This is the cause of the DMA faults and disk corruption that people have been seeing. Some chipsets neglect to report the RWBF "capability" -- the flag which says that we need to flush the chipset write-buffer when changing the DMA page tables, to ensure that the change is visible to the IOMMU. Override that bit on the affected chipsets, and everything is happy again. Thanks to Chris and Bhavesh and others for helping to debug. Should resolve: https://bugzilla.redhat.com/show_bug.cgi?id=479996 http://bugzilla.kernel.org/show_bug.cgi?id=12578 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Tested-and-acked-by: Chris Wright <chrisw@sous-sol.org> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14[WATCHDOG] iTCO_wdt: fix SMI_EN regression 2Wim Van Sebroeck
bugzilla: #12363 commit 7cd5b08be3c489df11b559fef210b81133764ad4 added a second regression: some Dell's and Compaq's lockup on boot. So we revert most of the code. The ICH9 reboot issue remains in place and will need some more fixing... :-( Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-02-13PCI: fix missing kernel-doc and typosRandy Dunlap
Fix pci kernel-doc parameter missing notation, correct function name, and fix typo: Warning(linux-2.6.28-git10//drivers/pci/pci.c:1511): No description found for parameter 'exclusive' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13PCI: fix struct pci_platform_pm_ops kernel-docRandy Dunlap
Fix struct pci_platform_pm_ops kernel-doc notation. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13PCI: fix rom.c kernel-doc warningRandy Dunlap
Fix PCI kernel-doc warning: Warning(linux-2.6.29-rc4-git1/drivers/pci/rom.c:67): No description found for parameter 'pdev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13PCI/MSI: fix msi_mask() shift fixMatthew Wilcox
Hidetoshi Seto points out that commit bffac3c593eba1f9da3efd0199e49ea6558a40ce has wrong values in the array. Rather than correct the array, we can just use a bounds check and perform the calculation specified in the comment. As a bonus, this will not run off the end of the array if the device specifies an illegal value in the MSI capability. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) wimax: fix oops in wimax_dev_get_by_genl_info() when looking up non-wimax iface net: 4 bytes kernel memory disclosure in SO_BSDCOMPAT gsopt try #2 netxen: fix compile waring "label ‘set_32_bit_mask’ defined but not used" on IA64 platform bnx2: Update version to 1.9.2 and copyright. bnx2: Fix jumbo frames error handling. bnx2: Update 5709 firmware. bnx2: Update 5706/5708 firmware. 3c505: do not set pcb->data.raw beyond its size Documentation/connector/cn_test.c: don't use gfp_any() net: don't use in_atomic() in gfp_any() IRDA: cnt is off by 1 netxen: remove pcie workaround sun3: print when lance_open() fails qlge: bugfix: Add missing rx buf clean index on early exit. qlge: bugfix: Fix RX scaling values. qlge: bugfix: Fix TSO breakage. qlge: bugfix: Add missing dev_kfree_skb_any() call. qlge: bugfix: Add missing put_page() call. qlge: bugfix: Fix fatal error recovery hang. qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb(). ...
2009-02-12netxen: fix compile waring "label ‘set_32_bit_mask’ defined but not ↵Yang Hongyang
used" on IA64 platform When compile the latest kernel on IA64 platform,I got a warning: drivers/net/netxen/netxen_nic_main.c:203: warning: label ‘set_32_bit_mask’ defined but not used We do not need label ‘set_32_bit_mask’ on IA64 platform,So move it to #else. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12bnx2: Update version to 1.9.2 and copyright.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12bnx2: Fix jumbo frames error handling.Michael Chan
If errors are reported on a frame descriptor, we need to account for the buffer pages that may have been used for this error packet and recycle them. Otherwise, we may get the wrong pages for the next packet. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 23:20:41 +0000