aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-01-29p54: upgrade memrecord to p54_tx_infoChristian Lamparter
mac80211 reserves 24 bytes in skb->cb for the driver. So far, we only used them to keep track of used and free device memory. But p54spi will need a slice of it, as well as the stuck frame detection. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: refactor p54_alloc_skbChristian Lamparter
Old firmwares had no problems processing frames which filled eighth of the memory window. However we have to be a bit more careful with fat frames when we talk to new firmwares. Apart from that, I confess the old logic was a bit weird and not very sophisticated. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29IWL: fix WARN typoJiri Slaby
new kew -> a new key Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: Update libertas core with GSPI constantsColin McCabe
Add GSPI constants to libertas core. Fix misleading comment in lbs_setup_firmware. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Fix iwl3945_init_drv()Samuel Ortiz
iwl3945_init_drv() initialises the wrong lock, and sets the wrong power saving default level. With this power saving mode, we are losing a lot of frames in Ad-Hoc mode. This is a bug fix for bug #1873. ( http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1873 ) Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: update copyright year to 2009Reinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Change crypto parameter nameSamuel Ortiz
Now that we're using iwl_mod_params, we want our module parameters names to be in sync with the structure. So, to set iwl_mod_params.sw_crypto, we'd better use a "swcrypto" parameter name instead of the "hwcrypto" current one. Moreover, by setting the decrypted flag properly, this patch also fixes the HW crypto path for 3945 (the current code is not setting it when running HW crypto). This is a bug fix for bug #1872 ( http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1872 ) Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: use hw_params.rx_buf_sizeWinkler, Tomas
This patch makes 3945 use of hw_params.rx_buf_size instead of IWL_RX_BUF_SIZE. It also renames IWL_RX_BUF_SIZE to IWL_RX_BUF_SIZE_3K and moves rx buffer defines into iwl-fh.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: remove double defined 3945 tfd structuresWinkler, Tomas
This patch removes doubly defined struct iwl3945_tfd_frame_data and struct iwl3945_tfd_frame. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_x2_queue_usedWinkler, Tomas
This patch replaces iwl3945_x2_queue_used with iwl_queue_used. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_rx_queue_spaceWinkler, Tomas
This patch replaces iwl3945_rx_queue_space with iwl_rx_queue_space. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_rx_queue_restockWinkler, Tomas
This patch kills iwl3945_rx_queue_restock function on prise of new hw_params.rx_wrt_ptr_reg which holds per NIC RX write pointer register. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill hw_params.tx_ant_numWinkler, Tomas
This patch removes tx_ant_num for hw_params structure. It is not used. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211_hwsim: Report driver as MFP capableJouni Malinen
mac80211_hwsim has no problems with MFP, so report it as MFP capable. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Setup MFP options for CCMPJouni Malinen
Configure hardware CCMP for management frame protection and use software crypto when needed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix set_key error codesJouni Malinen
Return -EOPNOTSUPP if the algorithm is not supported and -ENOSPC if there is no room in the key cache. This avoids KERN_ERR printk in mac80211 for "errors" that are actually expected to happen in normal operating conditions. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Use BIP (AES-128-CMAC)Jouni Malinen
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: extend/document powersave APIJohannes Berg
This modifies hardware flags for powersave to support three different flags: * IEEE80211_HW_SUPPORTS_PS - indicates general PS support * IEEE80211_HW_PS_NULLFUNC_STACK - indicates nullfunc sending in software * IEEE80211_HW_SUPPORTS_DYNAMIC_PS - indicates dynamic PS on the device It also adds documentation for all this which explains how to set the various flags. Additionally, it fixes a few things: * a spot where && was used to test flags * enable CONF_PS only when associated again Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: return NETDEV_TX_OK in p54_tx and fix sparse warningsChristian Lamparter
This patch addresses all recent comments from Johannes Berg: 1st: (reference http://marc.info/?l=linux-wireless&m=123124685019631 ) >First off: all those should return NETDEV_TX_OK/BUSY. >iwl-agn: returns 0 (== NETDEV_TX_OK, but still should be changed) >[...] >p54: same (some paths) 2nd: > due to your PS patch ("p54: power save management"), please run sparse: > make C=2 CF=-D__CHECK_ENDIAN__ M=... > +drivers/net/wireless/p54/p54common.c:1753:8: warning: incorrect type in assignment (different base types) > +drivers/net/wireless/p54/p54common.c:1769:29: warning: incorrect type in assignment (different base types) The cpu_to_le16 ended up in the wrong line... Sorry! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Only register rfkill input when key is presentIvo van Doorn
rt2x00 should only register the RFKILL input device when the hardware indicated the key was present. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: clean up channel type configJohannes Berg
The channel_type really doesn't need to be the only member in a new structure, so remove the struct. Additionally, remove the _CONF_CHANGE_HT flag and use _CONF_CHANGE_CHANNEL when the channel type changes, since that's enough of a change to require reprogramming the hardware anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29orinoco: Remove unused variable rx_dataDavid Kilroy
Probably something leftover from experimentation with tasklets. Now the structure declaration orinoco_rx_data can be relocated to orinoco.c Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Minor QCU updatesNick Kossifidis
* Sync qcu.c with legacy-hal * Add some more comments * Set QCU mask to save power (QCU mask controls which QCUs are attached to each DCU, we do a 1:1 mapping) TODO: Use max QCU from EEPROM, further sync with legacy-hal and sam's hal and a few more minor fixes. I think after this we are ready to implement WME on the driver part. Anyone interested ? Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Replace RFKILL with INPUTIvo van Doorn
As discussed on linux-wireless rt2x00 does not offer a true RFKILL key, for that reason RFKILL support should be entirely removed. The key which is attached to the hardware should be treated as normal input device instead. Implement input_poll_dev support to poll the device frequently. When the key status has changed report it as a SW event. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Enable Bluetooth Coexistence supportVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix off-by-one in gpio checksBob Copeland
Sanity checks against AR5K_NUM_GPIO were all broken. This doesn't currently cause any problems since we only use the first four gpios. Changes-licensed-under: ISC Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: support LEDs on Acer Aspire One netbookBob Copeland
Add vendor ID for Foxconn and use it to set the ath5k LED gpio and polarity for Acer branded laptops. base.c: Changes-licensed-under: 3-Clause-BSD Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: power save managementChristian Lamparter
This patch implements dynamic power save feature for p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: implement FIF_OTHER_BSS filter settingChristian Lamparter
According to STMicroelectronics' LMAC documentation, the P54_FILTER_TYPE_TRANSPARENT flag "configures the receive frame filter to pass all frames without regard to type and address matching." Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: enable rx/tx antenna diversity by eeprom bitsChristian Lamparter
Respect all documented bits in the eeprom about the device diversity features. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: use signed format to print HAL statusGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: clean up set_key callbackJohannes Berg
The set_key callback now seems rather odd, passing a MAC address instead of a station struct, and a local address instead of a vif struct. Change that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Bob Copeland <me@bobcopeland.com> [ath5k] Acked-by: Ivo van Doorn <ivdoorn@gmail.com> [rt2x00] Acked-by: Christian Lamparter <chunkeey@web.de> [p54] Tested-by: Kalle Valo <kalle.valo@nokia.com> [iwl3945] Tested-by: Samuel Ortiz <samuel@sortiz.org> [iwl3945] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Change schedule for old-fw support removalMichael Buesch
The scheduled date for the removal of old fw support was in July 2008. However, we're not going to remove the support unless it causes a major headache. So change the schedule from "July 2008" to "when it causes headaches". Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: regulatory domain hintsChristian Lamparter
This patch adds a sub-routine that parses the default country eeprom entry and forwards the obtained Alpha2 identifier to the regulatory sub-system. Note: I dropped the p54 specific regdomain<->alpha2 conversion code for now. But it will be added as soon as there's the common library function is ready. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: prevent upload of wrong firmwaresChristian Lamparter
This patch will prevent anyone to upload a firmware which was not designed for his device. There's still a catch: There is no easy way to detect if a firmware is for PCI or for USB (1st Gen), because they all share the same LM86 identifier. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54usb: utilize usb_reset_device for 3887Christian Lamparter
Sometimes on unload or reboot the 3887 USB devices become stuck. <usual log entry> kernel: usbcore: registered new interface driver p54usb kernel: usb 2-10: (p54usb) reset failed! (-110) kernel: p54usb: probe of 2-10:1.0 failed with error -110 [...] and a physical unplug and replug was necessary. However we should be able to do this in software as well, without any user interaction. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43/ssb: Add SPROM8 extraction and LP-PHY detectionMichael Buesch
This adds detection code for the LP-PHY and SPROM extraction code for version 8, which is needed by the LP-PHY and newer N-PHY. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: detect N PHY revision/radioJohannes Berg
Does nothing unless you enable the hidden N PHY config. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: INI update for Atheros AR9280 and AR9285 chipset.Senthil Balasubramanian
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ssb/b43: add new N PHY deviceJohannes Berg
This is used on my macbook. N PHY, obviously nothing works yet, but we can detect the chip with this patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: fix sparse warningsLuis R. Rodriguez
Fix sparse warnings: drivers/net/wireless/ath9k/hw.c:1850:17: warning: symbol 'tmp' shadows an earlier one drivers/net/wireless/ath9k/hw.c:1713:6: originally declared here drivers/net/wireless/ath9k/hw.c:2051:17: warning: symbol 'tmp' shadows an earlier one drivers/net/wireless/ath9k/hw.c:1961:6: originally declared here drivers/net/wireless/ath9k/eeprom.c:195:6: warning: symbol 'ath9k_fill_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:463:5: warning: symbol 'ath9k_check_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1219:6: warning: symbol 'ath9k_hw_set_def_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1510:6: warning: symbol 'ath9k_hw_set_4k_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2007:5: warning: symbol 'ath9k_set_txpower' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2106:6: warning: symbol 'ath9k_set_addac' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2543:6: warning: symbol 'ath9k_eeprom_set_board_values' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2606:5: warning: symbol 'ath9k_get_eeprom_antenna_cfg' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2622:4: warning: symbol 'ath9k_hw_get_4k_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2628:4: warning: symbol 'ath9k_hw_get_def_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2647:4: warning: symbol 'ath9k_get_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2790:5: warning: symbol 'ath9k_get_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:962:30: warning: symbol 'iq_cal_multi_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:969:30: warning: symbol 'iq_cal_single_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:976:30: warning: symbol 'adc_gain_cal_multi_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:983:30: warning: symbol 'adc_gain_cal_single_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:990:30: warning: symbol 'adc_dc_cal_multi_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:997:30: warning: symbol 'adc_dc_cal_single_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:1004:30: warning: symbol 'adc_init_dc_cal' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: remove superfluous check on changing channelLuis R. Rodriguez
When we try to change the channel in ath9k its because either the configuration indicates we *have* changed channels or HT configuration has changed. In both cases we want to do a reset. Either way mac80211 will inform us when we want to actually change the channel so trust those calls. Although in the patch it may seem as I am doing more code changes I am not, all I am doing is removing the initial branch conditional and shifting the code to the left. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: remove ath9k_hw_check_chan()Luis R. Rodriguez
The only check we care about in ath9k_hw_check_chan() is the internal regulatory check so use that. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: remove ath9k_hw_chan2wmode()Luis R. Rodriguez
The only left users are for timing for ACK timeout, slotime and CTS timeout. We currently use an array CLOCK_RATE to keep these values per mode and since as only will use A and G we can depend on the band to get the appropriate values. We note that we should be using a different clock rate value for CCK, we can do this in separate patch, currently this is being disregarded and should only affect when we want to change the default ACK/CTS timeout or slot time and stuck with using using 802.11b. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: remove mode specific default noise floor valuesLuis R. Rodriguez
The NOISE_FLOOR array we have is mode specific, and the only possible indexed values are A, B and G. The mode routine only can return G or A, so this is band specific. Then since the values for A and G (5ghz or 2ghz) are the same (-96) we simply remove the array and use a static value. If we later determine we want to use special values for HT configurations we can use the new mac80211 conf_is_ht*() helpers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Make ANI CCK and OFDM error triggers band specificLuis R. Rodriguez
The CCK and OFDM ANI error triggers are not mode specific but rather band specific so just make use of the already available band from ieee80211_conf. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: make use of conf_is_ht*() helpersLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: make use of conf_is_ht*() in the rest of the driverLuis R. Rodriguez
Use shiny new conf_is_ht*() helpers, we can later remove ht.enabled if desired. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: use ieee80211_conf on ath9k_hw_iscal_supported()Luis R. Rodriguez
ath9k_hw_iscal_supported() just needs to be aware of your band and if HT20 is being used so lets abandon our internal channel, HT appended values and internal mode values and use ieee80211_conf which already carries this information. This works as calibration is being done for the currently configured channel. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: make request to get the noisefloor threshold band specificLuis R. Rodriguez
Lets make the request to get the current noise floor threshold from the EEPROM band specific as it is band specific, not mode specific. This also adds a backpointer on the private channel structure back to the ieee80211_channel structure as this is now needed during ath9k_hw_getnf(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 19:04:07 +0000