aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-02-03qlge: Add check for eeh failure when closing device.Ron Mercer
Fix crash where resources are freed twice on an eeh recovery failure. If eeh recovery fails we set a flag to indicate to close() that resources have been freed. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03qlge: Move reset from eeh io_resume to slot_reset.Ron Mercer
Issue asic reset and verify functionality before continuing to the resume call. This allows proper error code to be returned in the case the asic does not recover. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03ixgbe: Make descriptor ring allocations NUMA-awarePJ Waskiewicz
This patch allocates the ring structures themselves on each NUMA node along with the buffer_info structures. This way we don't allocate the entire ring memory on a single node in one big block, thus reducing NUMA node memory crosstalk. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03ixgbe: Allocate driver resources per NUMA nodeJesse Brandeburg
The default policy for the current driver is to do all its memory allocation on whatever processor is running insmod/modprobe. This is less than optimal. This driver's default mode of operation will be to use each node for each subsequent transmit/receive queue. The most efficient allocation will be to then have the interrupts bound in such a way as to match up the interrupt of the queue to the cpu where its memory was allocated. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03e1000: call pci_save_state after pci_restore_stateNick Nunley
This patch adds a call to pci_save_state() immediately after the call to pci_restore_state(). Due to a change in the behavior of pci_restore_state() it is necessary to call pci_save_state() to keep the state_saved flag. This patch is based on a similar patch for ixgbe. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03e1000: Report link status in ethtool when interface is downNick Nunley
With this change ethtool will correctly report link status when the interface is down. Currently ethtool reports the link as not detected when the interface is down. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03ixgbe: only process one ixgbe_watchdog_task at a time.John Fastabend
Processing multiple ixgbe_watchdog_task calls may cause the link_up variable and IXGBE_FLAG_NEED_LINK_UPDATE flag to be set incorrectly. In the worse case this is causing the netif_carrier_off to be called inappropriately which results in an interface that can't be brought up. Although schedule_work() will only schedule the task if it is not already on the work queue the WORK_STRUCT_PENDING bits are cleared just before calling the work function. This allows WORK_STRUCT_PENDING to be cleared, the work function to start and meanwhile schedule another task. This patch adds a mutex to the watchdog task. This bug is actualized by changing DCB settings or doing extended cable pull or reset tests. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-03ixgbe: Fix return of invalid txqKrishna Kumar
a developer had complained of getting lots of warnings: "eth16 selects TX queue 98, but real number of TX queues is 64" http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html As there was no follow up on that bug, I am submitting this patch assuming that the other return points will not return invalid txq's, and also that this fixes the bug (not tested). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03ixgbe: Fix ixgbe_tx_map error pathAnton Blanchard
Commit e5a43549f7a58509a91b299a51337d386697b92c (ixgbe: remove skb_dma_map/unmap calls from driver) looks to have introduced a bug in ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards through count until it becomes -1 and return that. The caller of ixgbe_tx_map expects 0 on error, so return that instead. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03netxen: protect resource cleanup by rtnl lockAmit Kumar Salecha
o context resources can be in used, while resource cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03netxen: fix tx timeout recovery for NX2031 chipAmit Kumar Salecha
For NX2031, first try to scrub interrupt before requesting firmware reset. Return statement was missing after scrubbbing interrupt. Signed-off-by: Vernon Mauery <vernux@us.ibm.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Do not include unneeded headersBen Hutchings
Earlier refactoring has made these inclusions unnecessary. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Fix some incorrect or redundant commentsBen Hutchings
In particular, the comment about EVQ_RPTR_REG is based on inconsistent preliminary hardware documentation, though the following code was fixed long before release. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Remove declarations of nonexistent functionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Add some missing bits to register self-test masksSteve Hodgson
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Survive ISR0=0 bug in the shared IRQ caseGuido Barzini
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Implement NVRAM selftest for SFC9000 familyBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Replace PHY MDIO test with an 'alive' testBen Hutchings
SFC9000-family boards do not all use MDIO PHYs, so we need a different test for PHY aliveness. Introduce a PHY operation test_alive(). For PHYs attached to Falcon, use a common implementation based on the existing PHY MDIO test. For PHYs managed through MCDI, use the appropriate MCDI request. Change test name in ethtool from 'core mdio' to 'phy alive'. Rename test_results::mdio to phy_alive and test_results::phy to phy_ext. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Enable autonegotiated flow-control by default if supportedSteve Hodgson
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Handle firmware assertion failure while resettingSteve Hodgson
This allows the driver to recover if the MC firmware has crashed due to an assertion failure. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sfc: Update MCDI protocol definitionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03drivers/net/amd8111e.c: Fix continuation line formatsJoe Perches
String constants that are continued on subsequent lines with \ are not good. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03can: add support for CAN interface cards based on the PLX90xx PCI bridgePavel Cheblakov
This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) Changes since v1: - Added some defines for static inline int plx_pci_check_sja1000(...) - static struct pci_device_id plx_pci_tbl[] replaced by static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) - Typo fixed Signed-off-by: Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03cxgb3: add memory barriersDivy Le Ray
Add memory barriers to fix crashes observed on newest PowerPC platforms. The HW and driver state of the receive rings were getting out of sync. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sky2: fix transmit DMA map leakagestephen hemminger
The book keeping structure for transmit always had the flags value cleared so transmit DMA maps were never released correctly. Based on patch by Jarek Poplawski, problem observed by Michael Breuer. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03MCS7830 USB-Ether: resume _with_ working link, via .reset_resume supportAndreas Mohr
ChangeLog: Implement .reset_resume support to retain a live network connection during suspend despite USB power loss. - rework operation to reference cached data in mcs7830_data and netdev->dev_addr - update netdev->dev_addr only in case new MAC was set successfully . Tests done: . ethtool -d pre-/post-suspend: register values match . running ssh session suspend, resume: works . ifdown device, suspend, resume: works . ifup, suspend, unplug, resume: WORKS (eth1 is removed, re-ifup of eth1 after card replug works) . verified identical MAC in ifconfig post-resume (ok, should be verified on network side to be fully certain...) Keywords: suspend resume network connection dead interface down Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03MCS7830 USB-Ether: change register defineAndreas Mohr
ChangeLog: - rename register, add comment Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03MCS7830 USB-Ether: Spelling correctionsAndreas Mohr
ChangeLog: - spelling corrections / whitespace Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03MCS7830 USB-Ether: add Rx error supportAndreas Mohr
ChangeLog: - evaluate Rx error statistics from trailing Rx status byte - add driver TODO list - add myself to authors Quilt series run-tested, based on 2.6.33-rc4 (net-2.6.git mcs7830 has idle history, should be good to go). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02connector: Delete buggy notification code.Evgeniy Polyakov
On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote: > > There are at least two ways to fix it: using a big cannon and a small > > one. The former way is to disable notification registration, since it is > > not used by anyone at all. Second way is to check whether calling > > process is root and its destination group is -1 (kind of priveledged > > one) before command is dispatched to workqueue. > > Well if no one is using it, removing it makes the most sense, right? > > No objection from me, care to make up a patch either way for this? Getting it is not used, let's drop support for notifications about (un)registered events from connector. Another option was to check credentials on receiving, but we can always restore it without bugs if needed, but genetlink has a wider code base and none complained, that userspace can not get notification when some other clients were (un)registered. Kudos for Sebastian Krahmer <krahmer@suse.de>, who found a bug in the code. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add loopback diagnostic testAmit Kumar Salecha
Loopback test (offline) added in ethtool self test. o Set device in loopback mode o Send packets o Process receive packets in qlcnic_process_rcv_ring_diag() o Compare packets o Reset device in normal mode. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add interrupt diagnostic testAmit Kumar Salecha
Interrupt test (offline) added in ethtool self test. Register a temporary interrupt handler and then send command to fw to raise an interrupt. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: support LED blink for device identificationSucheta Chakraborty
Added support of device identification by blinking LED for specified time. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: protect resoruce cleanup by rtnl lockAmit Kumar Salecha
o context resources can be in used, while resoruce cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump and FW health registers should be dump in any case. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: clear device reset state after fw recoveryAmit Kumar Salecha
o After firmware recovery, clear device reset state transition register. Otherwise firmware reload can occur unnecessary. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add ethernet identifier in board infoAmit Kumar Salecha
Added missing identifier that distinguishes between FCOE/ISCSI/ETHERNET functions. Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: use DEFINE_PCI_DEVICE_TABLEAmit Kumar Salecha
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02sky2: Fix TX_MAP_PAGE misspellingJarek Poplawski
Btw of the dma-debug problem reported by Michael Breuer I spotted a tiny misspelling in TX_MAP_PAGE definition introduced by commit 6b84dacadbdc3. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02virtio_net: Defer skb allocation in receive path Date: Wed, 13 Jan 2010 ↵Shirley Ma
12:53:38 -0800 virtio_net receives packets from its pre-allocated vring buffers, then it delivers these packets to upper layer protocols as skb buffs. So it's not necessary to pre-allocate skb for each mergable buffer, then frees extra skbs when buffers are merged into a large packet. This patch has deferred skb allocation in receiving packets for both big packets and mergeable buffers to reduce skb pre-allocations and skb frees. It frees unused buffers by calling detach_unused_buf in vring, so recv skb queue is not needed. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02virtio: Add ability to detach unused buffers from vringsShirley Ma
There's currently no way for a virtio driver to ask for unused buffers, so it has to keep a list itself to reclaim them at shutdown. This is redundant, since virtio_ring stores that information. So add a new hook to do this. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02be2net: use eq-id to calculate cev-isr reg offsetSathya Perla
cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02net/irda: sh_sir: Add SuperH IrDA driverKuninori Morimoto
This is very simple IrDA SIR driver for SuperH. This driver was tested by irdaping/ircp on SH7724 EcoVec24 board Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6
2010-01-31tulip/xircom_cb.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME and xircom_cb from pr_<level> Convert embedded function names in logging messages to %s, __func__ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/winbond-840.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Convert %d.%d.%d.%d to %pI4 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/uli526x.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from logging messages Add do {} while(0) to ULI526X_DBUG macro Make SHOW_MEDIA_TYPE macro more readable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/timer.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/pnic2.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31tulip/pnic.c: Use dev_<level> and pr_<level>Joe Perches
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-26 05:56:24 +0000