aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-06-11[PATCH] libertas: fixed transmission flow control on the mesh interfaceJavier Cardona
This patch implements proper transmission flow control on mshX. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: split wlan_add_card()Holger Schurig
Split wlan_add_card() into a part that just setups kernel parameters and into the function libertas_activate_card(), which will implizitly use hardware functions by the started thread. This allows us later to do something like this: priv = libertas_add_card(); priv->hw_command_to_host = if_usb_command_to_host; priv->hw_xxxx = if_usb_xxxx; priv->hw_yyyy = if_usb_yyyy; wlan_activate_card() and of course the CF driver can set it's own functions. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move reset_device() code main.c to if_usb.cHolger Schurig
The reset_device() logic is only needed for USB devices, not for CF devices. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to ↵Holger Schurig
kzalloc() The subject says it all. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix SSID outputHolger Schurig
* a newline was missing * changed %32s to '%s', no need to right justify the ESSID Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: get rid of libertas_sbi_get_priv()Holger Schurig
It's not really needed, because we can call wlan_remove_card() with wlan_private* anyway. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: change debug output of libertas_interrupt()Holger Schurig
It used to be LBS_DEB_MAIN, now it's LBS_DEB_THREAD Also fixed a missing ":" in lbs_deb_enter() Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: single out mesh codeHolger Schurig
This patches adds the two functions wlan_add_mesh() and wlan_remove_mesh(), which are responsible for the mshX interface. In a CF driver with a non- mesh-aware firmware you can omit the calls to this functions. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: tune debug codeHolger Schurig
* renamed module parameter back to libertas_debug * change from bit shifts to constants, that way it's easier to look at the source and specify the libertas_debug=0xXXXX module parameter * moved module_param from fw.c to main.c, where it belongs better Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make debug configurableHolger Schurig
The debug output of libertas was either not present or it was overwhelming. This patch adds the possibility to specify a bitmask for the area of interest. One should then only get the desired output. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: exclude non-used code when PROC_DEBUG is not setHolger Schurig
This reduces usb8xxx.ko by 951 bytes (text) and 256 bytes (data) when PROC_DEBUG isn't defined. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix scanning from associate pathMarcelo Tosatti
The previous scan fix did not account for scan paths other than set_scan() that need to do a full scan at once. Add a "full_scan" parameter to wlan_scan_networks() to control such behaviour. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make libertas_wlan_data_rates staticHolger Schurig
Move libertas_wlan_data_rates into wext.c and make it static. wext.c is the only user of this array. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move vendor & product id's into if_usb.cHolger Schurig
For me it looks cleaner, because it removes one level of indirection. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove unused/superfluous definitions of DEV_NAME_LENHolger Schurig
DEV_NAME_LEN is already defined in defs.h and that is sufficient. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove __FILE__ from debug outputHolger Schurig
Remove filename from debug output because it's way too long. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove deprecated pm_register and associated codeMarcelo Tosatti
Subject says it all. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix removal of all debugfs filesHolger Schurig
rmmod did not remove /sys/kernel/debug/libertas_wireless/eth1/ subscribed_events/high_snr. After I fixed this, I noticed that it also didn't remove /sys/kernel/debug/libertas_wireless/eth1 as well. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: a debug output was missing a newlineHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: rename wlan_association_workerHolger Schurig
Renames wlan_association_worker into libertas_association_worker Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: scan two channels per scan commandMarcelo Tosatti
Scan two channels per each command on set_scan(), then bail out and let get_scan() continue the scanning work up to the last channel. This gives time to the firmware so it can go back to the association channel and keep the connection alive. Fixes http://dev.laptop.org/ticket/841 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-04Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [JFFS2] Fix obsoletion of metadata nodes in jffs2_add_tn_to_tree() [MTD] Fix error checking after get_mtd_device() in get_sb_mtd functions [JFFS2] Fix buffer length calculations in jffs2_get_inode_nodes() [JFFS2] Fix potential memory leak of dead xattrs on unmount. [JFFS2] Fix BUG() caused by failing to discard xattrs on deleted files. [MTD] generalise the handling of MTD-specific superblocks [MTD] [MAPS] don't force uclinux mtd map to be root dev
2007-06-04libata: always use polling SETXFERTejun Heo
Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] JAZZ ESP and SUN ESP need SPI_ATTRS [SCSI] atari_NCR5380: update_timeout removal [SCSI] aacraid: fix shutdown handler to also disable interrupts. [SCSI] qla2xxx: fix timeout in qla2x00_down_timeout [SCSI] fix CONFIG_SCSI_WAIT_SCAN=m
2007-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: reduce raciness when input handlers disconnect Input: ucb1x00 - do not access input_dev->private directly Input: logips2pp - fix typo in Kconfig Input: db9 - do not ignore dev2 module parameter
2007-06-04Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ICMP]: Fix icmp_errors_use_inbound_ifaddr sysctl [IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP [NET] gso: Fix GSO feature mask in sk_setup_caps [TCP]: Fix GSO ignorance of pkts_acked arg (cong.cntrl modules) [NET]: Fix comparisons of unsigned < 0. [NET]: Make net watchdog timers 1 sec jiffy aligned. [ATM]: Fix warning. [TCP]: Use default 32768-61000 outgoing port range in all cases. [AF_UNIX]: Fix datagram connect race causing an OOPS. [TG3]: Fix link problem on Dell's onboard 5906. [AF_UNIX]: Make socket locking much less confusing.
2007-06-04Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [ATA]: Don't allow to enable this for SPARC64 without PCI. [VIDEO]: XVR500 and XVR2500 require FB=y
2007-06-04SPI dynamic busid generation bugfixDavid Brownell
Fix SPI dynamic bus ID assignment to start at 2^15-1 rather than a negative number. Valid bus ids are supposed to be positive, and are (now) stored in an 's16' value. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-04[SCSI] JAZZ ESP and SUN ESP need SPI_ATTRSDavid S. Miller
Reported by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-04[SCSI] atari_NCR5380: update_timeout removalMichael Schmitz
Atari SCSI driver fixes: remove update_timeout kludge Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-03Input: reduce raciness when input handlers disconnectDmitry Torokhov
There is a race between input handler's release() and disconnect() methods: when input handler disconnects it wakes up all regular users and then process to walk user list to wake up async. users. While disconnect() walks the list release() removes elements of the same list causing oopses. While this is not a substibute for proper locking we can reduce odds of getting an oops if we wake up normal readers after walking the list. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-03Input: ucb1x00 - do not access input_dev->private directlyDmitry Torokhov
Use input_get_drvdata() and input_set_drvdata() helpers to do that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Pavel Machek <pavel@ucw.cz>
2007-06-03[ATA]: Don't allow to enable this for SPARC64 without PCI.David S. Miller
Based upon a report from Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03[VIDEO]: XVR500 and XVR2500 require FB=yDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03[ATM]: Fix warning.Jeff Garzik
The compiler warning drivers/atm/firestream.c: In function ‘top_off_fp’: drivers/atm/firestream.c:1505: warning: cast to pointer from integer of different size does indicate a bug, albeit a minor one. Fixed, by using a 32-bit temporary prior to the call to bus_to_virt(). The larger bug is still present: the entire driver assumes that machine pointers are 32-bit, as it stores pointers in 32-bit hardware registers. This is obvious to anyone who knows the driver well, but for the casual readers it is helpfully noted with FIXME. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03[TG3]: Fix link problem on Dell's onboard 5906.Michael Chan
The bug is caused by code that always set (TG3_FLAG_USE_MI_INTERRUPT | TG3_FLAG_USE_LINKCHG_REG) on all Dell's onboard devices. With these 2 flags set, the link status is polled by tg3_timer() and will only work when the PHY is set up to interrupt the MAC on link changes. This breaks 5906 because the 5906 PHY does not support TG3_FLAG_USE_MI_INTERRUPT the same as other PHYs. For correctness, only Dell's onboard 5701 needs these 2 flags to be set. This change will fix the 5906 problem and will change other Dell devices except 5700 and 5701 to use the more efficient interrupt-driven link changes. Update version to 3.77. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: NET: add MAINTAINERS entry for ucc_geth driver myri10ge: report link up/down in standard ethtool way NetXen: Removal of extra free_irq call Update tulip maintainer email address smc91x: sh solution engine fixes. e1000: disable polling before registering netdevice network drivers: eliminate unneeded kill_vid code atl1: eliminate unneeded kill_vid code 8139cp: fix VLAN unregistration sky2: Fix VLAN unregistration VLAN: kill_vid is only useful for VLAN filtering devices qla3xxx: device doesnt do hardware checksumming.
2007-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] clean-up watchdog documentation [WATCHDOG] ks8695_wdt.c - new KS8695 watchdog driver
2007-06-03Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix zImage.coff generation for 32-bit pmac [POWERPC] Fix compile breakage for IBM/AMCC 4xx arch/ppc platforms [POWERPC] Don't allow PMAC_APM_EMU for 64-bit [POWERPC] Compare irq numbers with NO_IRQ not IRQ_NONE [POWERPC] Fix return from pte_alloc_one() in out-of-memory case [POWERPC] Fix compile warning in pseries xics code [POWERPC] Don't use HOSTCFLAGS in BOOTCFLAGS [POWERPC] Create a zImage for legacy iSeries [POWERPC] pasemi idle uses hard_smp_processor_id [POWERPC] ps3/interrupt.c uses get_hard_smp_processor_id [POWERPC] Fix possible access to free pages [POWERPC] Fix compiler/assembler flags for Ebony platform boot files [POWERPC] Fix ppc32 single-stepping out of syscalls [POWERPC] Update documentation for of_find_node_by_type()
2007-06-03myri10ge: report link up/down in standard ethtool wayBrice Goglin
Report link up/down in standard ethtool way Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03NetXen: Removal of extra free_irq callMithlesh Thukral
NetXen: Removal of redundant free_irq This patch removes a redundant free_irq() call from remove() routine. This will also eliminate a warning during unload of driver. Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03smc91x: sh solution engine fixes.Paul Mundt
The current smc91x I/O routines ifdef the solution engine subtypes individually, which is rather bogus, as they can simply use CONFIG_SOLUTION_ENGINE instead. This fixes it for some of the other solution engines that weren't included in the ifdef list (SH7206 specifically). There are also inb/outb definitions which are totally bogus (missing brackets in _both_ cases, SMC_CAN_USE_8BIT == 0, and even better, they try to use a 16-bit access to fake 8-bit access). Kill that nonsense off completely. Signed-off-by: Paul Mundt <lethal@linux-sh.org> -- drivers/net/smc91x.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03e1000: disable polling before registering netdeviceAuke Kok
To assure the symmetry of poll enable/disable in up/down, we should initialize the netdevice to be poll_disabled at load time. Doing this after register_netdevice leaves us open to another race, so lets move all the netif_* calls above register_netdevice so the stack starts out how we expect it to be. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Doug Chapman <doug.chapman@hp.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03network drivers: eliminate unneeded kill_vid codeStephen Hemminger
Many drivers had code that did kill_vid, but they weren't doing vlan filtering. With new API the stub is unneeded unless device sets NETIF_F_HW_VLAN_FILTER. Bad habit: I couldn't resist fixing a couple of nearby style things in acenic, and forcedeth. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03atl1: eliminate unneeded kill_vid codeStephen Hemminger
This driver has unneeded stubs for VLAN filtering. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-038139cp: fix VLAN unregistrationStephen Hemminger
The 8139cp driver did VLAN unregistration incorrectly. It disables VLAN completely when the first VID is unregistered. It should instead disable VLAN when the group is unregistered by calling cp_vlan_rx_register with a NULL grp. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03sky2: Fix VLAN unregistrationStephen Hemminger
Fix sky2 disabling VLAN completely when the first vid is unregistered. sky2 disables VLAN completely when the first VID is unregistered. It should instead disable VLAN when the group is unregistered by calling sky2_vlan_rx_register with grp = NULL. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> drivers/net/sky2.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03qla3xxx: device doesnt do hardware checksumming.Stephen Hemminger
Reading the code for ql_hw_csum_setup(), it is obvious that this driver is broken for IPV6. The driver sets the NETIF_F_HW_SUM flag, but the code for checksum setup only deals with IPV4. Compile tested only, no hardware available. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-02[POWERPC] Don't allow PMAC_APM_EMU for 64-bitJohannes Berg
In b302887854d6f0c6f9fc3f1080535e7c1bd53134 I switched the apm emulation code to use the generic code but accidentally dropped the PPC32 dependency from the configuration symbol. This adds it back. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02Pull osi-now into release branchLen Brown
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 22:39:33 +0000