aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-25[MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partitionAtsushi Nemoto
add_mtd_partition was a 150+ line monster consisting mostly of a single loop. Seperate the loop from most of the body. Now it should be obvious which variables are carried around from iteration to iteration. Signed-off-by: Jörn Engel <joern@logfs.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25[MTD] physmap: resume already suspended chips on failure to suspendUwe Kleine-König
A nice side effect of this patch is that the return value of physmap_flash_suspend in the error path is the value of the first failing suspend callback and not the bitwise OR of all of them. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25[MTD] physmap: Fix suspend/resume/shutdown bugs.Robert Jarzmik
Don't call suspend/resume functions if they have not been defined. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Acked-By: Jörn Engel <joern@logfs.org> Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25[MTD] [NOR] Fix -ETIMEO errors in CFI driverAlexey Korolev
Existing CFI driver has problems with excessive writes during erase. If CFI driver does many writes during one erase cycle we may face the messages with -ETIMEO error on erase operation. It may cause the following data corruption and kernel panics. The reason of the issue is related to specifics of suspend operation: if we write to flash during erase, suspend operation will cost some time to erase procedure (for P30 it could be significant). In current version of cfi driver the problem of many suspends is partially workarounded by adding some time reserv to any operation (8xerase_time) but if we have many writes during one erase the problem appears. This patch detects the suspend and resets timer if suspend occured. It has been well verified on different chips. No problems were found. Could you please include the patch as it is simple and fixes bad issue. Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25[MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=yAnton Vorontsov
With CONFIG_MTD_OF_PARTS=y I'm getting this new section mismatch in reference from the function fsl_elbc_chip_probe() to the function .devinit.text:of_mtd_parse_partitions() This patch fixes the mismatch by providing __devinit annotation to the fsl_elbc_chip_probe() function. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-By: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] Fix const assignment in the MTD command line partitioning driverDavid Howells
Fix const to non-const pointer assignment in the MTD command line partitioning driver. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NOR] gen_probe: No debug message when debugging is disabledJean Delvare
Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message is only printed when debugging is enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: John stoffel <john@stoffel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip driversMilton Miller
Such a hardcoded address can cause a checkstop or machine check if the driver is in the kernel but the address is not acknowledged. Both drivers allow an address to be specified as either a module parameter or config option. Any future powerpc board should either use one of these methods or find the address in the device tree. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [MAPS] Remove the bast-flash driver.Ben Dooks
Remove the Simtec BAST flash driver as this has been replaced by using the platform flash driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] fsl_elbc_nand: ecclayout cleanupsAnton Vorontsov
This patch deletes oobavail assignments, they're calculated by the nand core code in nand_scan_tail, plus current oobavail values are wrong for the LP NANDs. Also remove mtd->ecclayout and mtd->oobavail assignments, mtd core handles this all by itself. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBTAnton Vorontsov
This patch implements support for flash-based BBT for chips working through ELBC NAND controller, so that NAND core will not have to re-scan for bad blocks on every boot. Because ELBC controller may provide HW-generated ECCs we should adjust bbt pattern and bbt version positions in the OOB free area. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chipsAnton Vorontsov
For large page chips, nand_bbt is looking into OOB area, and checking for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be reserved for bbt means. But ELBC driver is specifying ecclayout so that oobfree area starts at offset 1, so only one byte left for the bbt purposes. This causes problems with any OOB users, namely JFFS2: after first mount JFFS2 will fill all OOBs with "erased marker", so OOBs will contain: OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff And on the next boot, NAND core will rescan for bad blocks, then will see "0xff 0x19" pattern, and will mark all blocks as bad ones. To fix the issue we should implement our own bad block pattern: just one byte at OOB start. Though, this will work only for x8 chips. For x16 chips two bytes must be checked. Since ELBC driver does not support x16 NANDs (yet), we're safe for now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] atmel_nand can be modularDavid Brownell
There's no reason to prevent the Atmel NAND driver from building as a module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] atmel_nand: Work around AT32AP7000 ECC erratumHaavard Skinnemoen
The ALE signal isn't correctly wired up to the ECC controller on the AP7000, so it starts calculating ECC during the address cycles. Work around this by resetting the ECC controller between the address and data cycles. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] atmel_nand speedup via {read,write}s{b,w}()David Brownell
This uses __raw_{read,write}s{b,w}() primitives to access data on NAND chips for more efficient I/O. On an arm926 with memory clocked at 100 MHz, this reduced the elapsed time for a 64 MiB read by 16%. ("dd" /dev/mtd0 to /dev/null, with an 8-bit NAND using hardware ECC and 128KiB blocksize.) Also some minor section tweaks: - Use platform_driver_probe() so no pointer to probe() lingers after that code has been removed at run-time. - Use __exit and __exit_p so the remove() code will normally be removed by the linker. Since these buffer read/write calls are new, this increases the runtime code footprint (by 88 bytes on my build, after the section tweaks). [haavard.skinnemoen@atmel.com: rebase onto atmel_nand rename] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] mtdchar.c remove shadowed variable warningsHarvey Harrison
Use einfo, oinfo for the inner erase_info and otp_info structs used in individual case statements. drivers/mtd/mtdchar.c:582:26: warning: symbol 'info' shadows an earlier one drivers/mtd/mtdchar.c:380:23: originally declared here drivers/mtd/mtdchar.c:596:26: warning: symbol 'info' shadows an earlier one drivers/mtd/mtdchar.c:380:23: originally declared here drivers/mtd/mtdchar.c:704:19: warning: symbol 'info' shadows an earlier one drivers/mtd/mtdchar.c:380:23: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] mtdchar.c silence sparse warningHarvey Harrison
The copy_to_user was casting away the address space to get the offset of the length member. Use offsetof() instead and add it to the void __user *argp. drivers/mtd/mtdchar.c:527:23: warning: cast removes address space of expression drivers/mtd/mtdchar.c:527:23: warning: incorrect type in argument 1 (different address spaces) drivers/mtd/mtdchar.c:527:23: expected void [noderef] <asn:1>*to drivers/mtd/mtdchar.c:527:23: got unsigned int *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] m25p80: fix bug - ATmel spi flash fails to be copied toMichael Hennerich
Atmel serial flash tends to power up with the protection status bits set. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4089 [michael.hennerich@analog.com: remove duplicate code] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) tun: Persistent devices can get stuck in xoff state xfrm: Add a XFRM_STATE_AF_UNSPEC flag to xfrm_usersa_info ipv6: missed namespace context in ipv6_rthdr_rcv netlabel: netlink_unicast calls kfree_skb on error path by itself ipv4: fib_trie: Fix lookup error return tcp: correct kcalloc usage ip: sysctl documentation cleanup Documentation: clarify tcp_{r,w}mem sysctl docs netfilter: nf_nat_snmp_basic: fix a range check in NAT for SNMP netfilter: nf_conntrack_tcp: fix endless loop libertas: fix memory alignment problems on the blackfin zd1211rw: stop beacons on remove_interface rt2x00: Disable synchronization during initialization rc80211_pid: Fix fast_start parameter handling sctp: Add documentation for sctp sysctl variable ipv6: fix race between ipv6_del_addr and DAD timer irda: Fix netlink error path return value irda: New device ID for nsc-ircc irda: via-ircc proper dma freeing sctp: Mark the tsn as received after all allocations finish ...
2008-07-10tun: Persistent devices can get stuck in xoff stateMax Krasnyansky
The scenario goes like this. App stops reading from tun/tap. TX queue gets full and driver does netif_stop_queue(). App closes fd and TX queue gets flushed as part of the cleanup. Next time the app opens tun/tap and starts reading from it but the xoff state is not cleared. We're stuck. Normally xoff state is cleared when netdev is brought up. But in the case of persistent devices this happens only during initial setup. The fix is trivial. If device is already up when an app opens it we clear xoff state and that gets things moving again. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10Merge branch 'for-2.6.26' of git://neil.brown.name/mdLinus Torvalds
* 'for-2.6.26' of git://neil.brown.name/md: md: ensure all blocks are uptodate or locked when syncing
2008-07-10md: ensure all blocks are uptodate or locked when syncingDan Williams
Remove the dubious attempt to prefer 'compute' over 'read'. Not only is it wrong given commit c337869d (md: do not compute parity unless it is on a failed drive), but it can trigger a BUG_ON in handle_parity_checks5(). Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb3: Fix regression caused by class_device -> device conversion
2008-07-09libertas: fix memory alignment problems on the blackfinIhar Hrachyshka
Fixing unaligned memory access on the blackfin architecture. Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09zd1211rw: stop beacons on remove_interfaceLuis Carlos Cobo
If a mesh or ad-hoc interface is brought up and later it is replaced by managed interface, the managed interface will keep transmitting the beacons that were configured for the former interface. This patch fixes that behaviour. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09rt2x00: Disable synchronization during initializationIvo van Doorn
As soon as init_registers() was called, the rt2400/rt2500 would start raising beacondone interrupts. Since this is highly premature since no beacons were provided yet, we should initialize the synchronization register to 0. This will make all drivers initialize it to 0 regardless if they are raising beacondone interrupts or not, since it only makes sense to have it completely disabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08RDMA/cxgb3: Fix regression caused by class_device -> device conversionSteve Wise
The change to iwch_provider.c in commit f4e91eb4 ("IB: convert struct class_device to struct device") undid the fix done in commit 7f049f2f ("RDMA/cxgb3: Hold rtnl_lock() around ethtool get_drvinfo call"). It removed the calls to rtnl_lock() that serialized the iw_cxgb3 ethtool ops calls into the cxgb3 driver. This locking is needed to avoid messing up the internal state of the cxgb3 driver. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-08Fix broken fix for fsl-diu-dbTakashi Iwai
On 2.6.26-rc9, the commit 05946bce839b4fed5442dbfab77060fb75e051f3 ("fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings") breaks its previous fix f969c5672b16b857e5231ad3c78f08d8ef3305aa ("fsl-diu-db: compile fix") This patch reverts the broken part. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-08it8213: fix return value in it8213_init_one()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-08palm_bk3710: fix IDECLK period calculationSergei Shtylyov
The driver uses completely bogus rounding formula for calculating period from the IDECLK frequency which gives one-off period values (e.g. 11 ns with 100 MHz IDECLK) which in turn can lead to overclocked IDE transfer timings. Actually, rounding is just wrong in this case, so use a mere division for a safe result. While at it, also: - give 'ide_palm_clk' variable a more suitable name; - get rid of the useless 'ideclkp' variable; - drop the LISP stype 'p' postfix from the 'clkp' variable's name. :-) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: mcherkashin@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-08ide: add __ide_default_irq() inline helperBartlomiej Zolnierkiewicz
Add __ide_default_irq() inline helper and use it instead of ide_default_irq() in ide-probe.c and ns87415.c (all host drivers except IDE PCI ones always setup hwif->irq so it is enough to check only for I/O bases 0x1f0 and 0x170). This fixes post-2.6.25 regression since ide_default_irq() define could shadow ide_default_irq() inline. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-08irda: New device ID for nsc-irccVille Syrjala
HP OmniBook 500's DSDT code changes the HID of the FIR device from NSC6001 to HWPC224 when run under an "NT" operating system. Add the new ID to the pnp device id table. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08irda: via-ircc proper dma freeingWang Chen
1. dma should be freed when dma2 request fail. 2. dma2 should be freed too when device close. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-07ssb-pcicore: Fix IRQ-vector init on embedded devicesMichael Buesch
On embedded devices we must not route the interrupts through the PCI core, if our host-bus is not PCI. Reported-by: Steve Brown <sbrown@cortland.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07zd1211rw: add ID for AirTies WUS-201Firat Birlik
I would like to inform you of our zd1211 based usb wifi adapter (AirTies WUS-201), which works with the zd1211rw driver with the following device id definition. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07drivers/net/wireless/iwlwifi/iwl-3945.c Fix type issue on 64bitDarren Jenkins
Coverity CID: 2265 NEGATIVE_RETURNS "rate" is of an unsigned type, and the code requires a signed type. The following patch makes it so. Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07hostap_cs: correct poor NULL checks in suspend/resume routinesJohn W. Linville
This corrects this kernel.org bug: http://bugzilla.kernel.org/show_bug.cgi?id=9701 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: can: add sanity checks fs_enet: restore promiscuous and multicast settings in restart() ibm_newemac: Fixes entry of short packets ibm_newemac: Fixes kernel crashes when speed of cable connected changes pasemi_mac: Access iph->tot_len with correct endianness ehea: Access iph->tot_len with correct endianness ehea: fix race condition ehea: add MODULE_DEVICE_TABLE ehea: fix might sleep problem forcedeth: fix lockdep warning on ethtool -s Add missing skb->dev assignment in Frame Relay RX code bridge: fix use-after-free in br_cleanup_bridges() tcp: fix a size_t < 0 comparison in tcp_read_sock tcp: net/ipv4/tcp.c needs linux/scatterlist.h libertas: support USB persistence on suspend/resume (resend) iwlwifi: drop skb silently for Tx request in monitor mode iwlwifi: fix incorrect 5GHz rates reported in monitor mode
2008-07-06pxamci: fix byte aligned DMA transfersPhilipp Zabel
The pxa27x DMA controller defaults to 64-bit alignment. This caused the SCR reads to fail (and, depending on card type, error out) when card->raw_scr was not aligned on a 8-byte boundary. For performance reasons all scatter-gather addresses passed to pxamci_request should be aligned on 8-byte boundaries, but if this can't be guaranteed, byte aligned DMA transfers in the have to be enabled in the controller to get correct behaviour. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-06Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds
This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 ACPI: fix resume from suspend to RAM on uniprocessor x86-64 x86 ACPI: normalize segment descriptor register on resume
2008-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: ide_unregister() locking bugfix ide: ide_unregister() warm-plug bugfix ide: fix hwif->gendev refcounting
2008-07-05ahci: give another shot at clearing all bits in irq_statTejun Heo
Commit ea0c62f7cf70f13a67830471b613337bd0c9a62e tried to clear all bits in irq_stat but it didn't actually achieve that as irq_stat was anded with port_map right after read. This patch makes ahci driver always use the unmasked value to clear irq_status. While at it, add explanation on the peculiarities of ahci IRQ clearing. This was spotted by Linus Torvalds. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-05ide: ide_unregister() locking bugfixBartlomiej Zolnierkiewicz
Holding ide_lock for ide_release_dma_engine() call is unnecessary and triggers WARN_ON(irqs_disabled()) in dma_free_coherent(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-05ide: ide_unregister() warm-plug bugfixBartlomiej Zolnierkiewicz
Fix ide_unregister() to work for ports with no devices attached to them. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-05ide: fix hwif->gendev refcountingBartlomiej Zolnierkiewicz
class->dev_release is called by device_release() iff dev->release is not present so ide_port_class_release() is never called and the last hwif->gendev reference is not dropped. Fix it by removing ide_port_class_release() and get_device() call from ide_register_port() (device_create_drvdata() takes a hwif->gendev reference anyway). This patch fixes hang on wait_for_completion(&hwif->gendev_rel_comp) in ide_unregister() reported by Pavel Machek. Cc: Pavel Machek <pavel@suse.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-05x86 ACPI: normalize segment descriptor register on resumeH. Peter Anvin
Some Dell laptops enter resume with apparent garbage in the segment descriptor registers (almost certainly the result of a botched transition from protected to real mode.) The only way to clean that up is to enter protected mode ourselves and clean out the descriptor registers. This fixes resume on Dell XPS M1210 and Dell D620. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10927 Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: pm list <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-04mmc: don't use DMA on newer ENE controllersPierre Ossman
Even the newer ENE controllers have bugs in their DMA engine that make it too dangerous to use. Disable it until someone has figured out under which conditions it corrupts data. This has caused problems at least once, and can be found as bug report 10925 in the kernel bugzilla. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04mm: switch node meminfo Active & Inactive pages to KbytesJohn Blackwood
There is a bug in the output of /sys/devices/system/node/node[n]/meminfo where the Active and Inactive values are in pages instead of Kbytes. Looks like this occurred back in 2.6.20 when the code was changed over to use node_page_state(). Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>