aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: validate late-added resources pcmcia: allow for extension of resource interval pcmcia: remove useless msleep in ds.c pcmcia: use read_cis_mem return value pcmcia: handle error in serial_cs config calls pcmcia: add locking to pcmcia_{read,write}_cis_mem pcmcia: avoid prod_id memleak pcmcia: avoid sysfs-related lockup for cardbus pcmcia: use state machine for extended requery pcmcia: delay re-scanning and re-querying of PCMCIA bus pcmcia: use pccardd to handle eject, insert, suspend and resume requests pcmcia: use ops_mutex for rsrc_{mgr,nonstatic} locking pcmcia: use mutex for dynid lock pcmcia: assert locking to struct pcmcia_device pcmcia: add locking documentation pcmcia: simplify locking pcmcia: add locking to struct pcmcia_socket->pcmcia_state() pcmcia: protect s->device_count pcmcia: properly lock skt->irq, skt->irq_mask pcmcia: lock ops->set_socket ...
2010-02-27Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits) powerpc: Fix lwsync feature fixup vs. modules on 64-bit powerpc: Convert pmc_owner_lock to raw_spinlock powerpc: Convert die.lock to raw_spinlock powerpc: Convert tlbivax_lock to raw_spinlock powerpc: Convert mpic locks to raw_spinlock powerpc: Convert pmac_pic_lock to raw_spinlock powerpc: Convert big_irq_lock to raw_spinlock powerpc: Convert feature_lock to raw_spinlock powerpc: Convert i8259_lock to raw_spinlock powerpc: Convert beat_htab_lock to raw_spinlock powerpc: Convert confirm_error_lock to raw_spinlock powerpc: Convert ipic_lock to raw_spinlock powerpc: Convert native_tlbie_lock to raw_spinlock powerpc: Convert beatic_irq_mask_lock to raw_spinlock powerpc: Convert nv_lock to raw_spinlock powerpc: Convert context_lock to raw_spinlock powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards powerpc/86xx: Enable VME driver on the GE SBC610 powerpc/86xx: Enable VME driver on the GE PPC9A powerpc/86xx: Add MSI section to GE PPC9A DTS ...
2010-02-27macfb: fix 24-bit visual and stuffFinn Thain
Lots of changes. Remove volatile keywords. Take the advice in the comments and change video_slot to slot_addr. Factor out fifteen or so "channel >> 8" shifts into three shifts higher up the call graph. Make csc_setpalette() atomic, pass the correct color values. Check for ioremap() failure. Add missing break statement, thus fixing 24 bit console visual (blue background bug). Remove some uninformative printk() noise. Add a description for powerbook 140/170 graphics. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27macfb: cleanupFinn Thain
Cleanup whitespace and code style. Remove unused #includes and prototypes. Remove obsolete, redundant or misleading comments. Remove dead code and redundant initialisers. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27fbdev: add some missing mac modesFinn Thain
Add the missing mac video modes for the Portrait and 12" RGB displays. The specs come from the Mac LC III developer note. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: start CUDA earlyFinn Thain
The valkyriefb driver needs the CUDA to work in order to set the video mode at boot. So initialise the device earlier, and bring the m68k code closer to the powermac code. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27valkyriefb: various fixesFinn Thain
Valkyriefb and macfb will adopt the same card if they get the chance, so remove valkyrie support from macfb. Also fix the "valkyriefb: can't do 832x624x8" problem reported by Raylynn Knight some time ago, by adding vmode 13 support for CONFIG_MAC. Also add vmode 11 since that works too. Make use of the monitor sense lines on 68k Macs too. Also some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27fbdev: mac_var_to_mode() fixFinn Thain
The valkyriefb driver assumes that this logic holds: mac_vmode_to_var(X, cmode, &var); mac_var_to_vmode(&var, &vmode, &cmode); assert(vmode == X); But it doesn't hold because mac_var_to_vmode() can return a mode with a slower pixel clock, even when a match is available. So we end up with this failure: using video mode 11 and color mode 0. valkyriefb: vmode 12 not valid. valkyriefb: can't set default video mode valkyriefb: vmode 12 not valid. Rather than have mac_var_to_mode() return the first reasonable mode it finds, have it return the mode that is closest to the requested one (or the mode with the closest longer pixel clock period if there is no exact match). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: move macsonic and macmace platform devicesFinn Thain
Move platform device code from the drivers to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: move mac_esp platform deviceFinn Thain
Move platform device code from the driver to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27pmac-zilog: add platform driverFinn Thain
Add platform driver support to the pmac-zilog driver, for m68k macs. Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27pmac-zilog: cleanupFinn Thain
Whitespace cleanups and comment typo fix. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: rework SWIM platform deviceFinn Thain
Adjust the platform device code to conform with the code style used in the rest of this patch series. No need to name resources nor to register devices which are not applicable. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27ataflop: Killl warning about unused variable flagsGeert Uytterhoeven
After commit e0c0978699a83f26f2341f7eedc1463b79e31aff ("ataflop: remove buggy/commented-out IRQ disable from do_fd_request()") the `flags' variable became unused: drivers/block/ataflop.c:1473: warning: unused variable 'flags' Hence remove it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27m68k: vme_scc - __init annotationsPeter Huewe
Trivial patch which adds the __init macro to the module_init function and all of its helper functions of drivers/char/vme_scc.c Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27Bluetooth: Convert Marvell driver to use per adapter debugfsMarcel Holtmann
The debugfs support of the Marvell driver is buggy. It is limited to one controller per system. Fix this by using the controller specific debugfs directory as parent. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Convert controller hdev->type to hdev->busMarcel Holtmann
The hdev->type is misnamed and should be actually hdev->bus instead. So convert it now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Add missing kfree() on error path in Atheros driverDan Carpenter
Add a couple kfree() calls on an error path. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Make USB device id constantMárton Németh
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make bcm203x_table also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Add __init/__exit macros to Marvell SDIO driverPeter Huewe
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of btmrvl_sdio.c driver. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27MIPS: Alchemy: use 36bit addresses for PCMCIA resources.Manuel Lauss
On Alchemy the PCMCIA area lies at the end of the chips 36bit system bus area. Currently, addresses at the far end of the 32bit area are assumed to belong to the PCMCIA area and fixed up to the real 36bit address before being passed to ioremap(). A previous commit enabled 64 bit physical size for the resource datatype on Alchemy and this allows to use the correct 36bit addresses when registering the PCMCIA sockets. This patch removes the 32-to-36bit address fixup and registers the Alchemy demo board pcmcia socket with the correct 36bit physical addresses. Tested on DB1200, with a CF card (ide-cs driver) and a 3c589 PCMCIA ethernet card. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon: Remove /proc/octeon_ethernet_statsDavid Daney
This file shouldn't be in /proc, so we remove it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon: Reformat a bunch of comments.David Daney
Many of the comments didn't follow kerneldoc guidlines. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/971/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon: Free transmit SKBs in a timely mannerDavid Daney
If we wait for the once-per-second cleanup to free transmit SKBs, sockets with small transmit buffer sizes might spend most of their time blocked waiting for the cleanup. Normally we do a cleanup for each transmitted packet. We add a watchdog type timer so that we also schedule a timeout for 150uS after a packet is transmitted. The watchdog is reset for each transmitted packet, so for high packet rates, it never expires. At these high rates, the cleanups are done for each packet so the extra watchdog initiated cleanups are neither needed nor triggered. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Cc: Eric Dumazet <eric.dumazet@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/968/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> This version has spelling and comment changes based on feedback from Eric Dumazet.
2010-02-27Staging: Octeon: Run phy bus accesses on a workqueue.David Daney
When directly accessing a phy, we must acquire the mdio bus lock. To do that we cannot be in interrupt context, so we need to move these operations to a workqueue. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/965/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: octeon: remove unneeded includesDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/964/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MMC: AU1xMMC: Allow platforms to disable host capabilitiesManuel Lauss
Although the hardware supports a 4/8bit SD interface and the driver unconditionally advertises all hardware caps to the MMC core, not all datalines may actually be wired up. This patch introduces another field to au1xmmc platform data allowing platforms to disable certain advanced host controller features. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: linux-mmc@vger.kernel.org CC: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Implement clock APIFlorian Fainelli
This patch makes the ar7 clock code implement the Linux clk API. Drivers using the various clocks available in the SoC are updated accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> To: linux-mips@linux-mips.org Cc: Wim Van Sebroeck <wim@iguana.be> Cc: netdev@vger.kernel.org Cc: David Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Change the Email address of Wu ZhangjinWu Zhangjin
Currently wuzj@lemote.com is not usable; change it to wuzhangjin@gmail.com. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/829/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Use constants from in.hDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/837/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Enable scatter-gather.David Daney
Octeon ethernet hardware can handle NETIF_F_SG, so we enable it. A gather list of up to six fragments will fit in the SKB's CB structure, so no extra memory is required. If a SKB has more than six fragments, we must linearize it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Convert to NAPI.David Daney
Convert the driver to be a reasonably well behaved NAPI citizen. There is one NAPI instance per CPU shared between all input ports. As receive backlog increases, NAPI is scheduled on additional CPUs. Receive buffer refill code factored out so it can also be called from the periodic timer. This is needed to recover from temporary buffer starvation conditions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Rewrite transmit code.David Daney
Stop the queue if too many packets are queued. Restart it from a high resolution timer. Rearrange and simplify locking and SKB freeing code Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Fix memory allocation.David Daney
After aligning the blocks returned by kmalloc, we need to save the original pointer so they can be correctly freed. There are no guarantees about the alignment of SKB data, so we need to handle worst case alignment. Since right shifts over subtraction have no distributive property, we need to fix the back pointer calculation. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Remove unused code.David Daney
Remove unused code, reindent, and join some spilt strings. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: I2C: Add driver for Cavium OCTEON I2C ports.Rade Bozic
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27NET: au1000-eth: Convert to platform_driver modelFlorian Fainelli
This patch converts the au1000-eth driver to become a full platform-driver as it ought to be. We now pass PHY-speficic configurations through platform_data but for compatibility the driver still assumes the default settings (search for PHY1 on MAC0) when no platform_data is passed. Tested on my MTX-1 board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/619/ Patchwork: http://patchwork.linux-mips.org/patch/963/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: physmap-flash for all devboardsManuel Lauss
Replace the devboard NOR MTD mapping driver with physmap-flash support. Also honor the "swapboot" switch settings wrt. to the layout of the NOR partitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27SERIAL 8250: Fixes for Alchemy UARTs.Manuel Lauss
Limit the amount of address space claimed for Alchemy serial ports to 0x1000. On the Au1300, ports are only 0x1000 apart, and the registers only extend to 0x110 at most on all supported alchemy models. On the Au1300 the autodetect logic no longer works and this makes it necessary to specify the port type through platform data. Because of this the MSR quirk needs to be moved outside the autoconfig() function which will no longer be called when UPF_FIXED_TYPE is specified. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27ixgbe: move TC_PRIO_CONTROL check into ixgbe_select_queue()John Fastabend
Move TC_PRIO_CONTROL check and queue remapping into ixgbe_select_queue(). Remapping queues after the qdisc can result in the wrong qdisc queue being stopped with netif_stop_subqueue(). Even if this is resolved and the correct queue is stopped it can result in a queue being blocked by TC_PRIO_CONTROL frames uneccesarily. Moving this into the select_queue routine maintains alignment between tx_rings and qdisc queues. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27bonding: fix device leak on error in bond_create()Patrick McHardy
When the register_netdevice() call fails, the newly allocated device is not freed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: support specifying device flags on device creationPatrick McHardy
commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27fs_enet: add FEC TX buffer alignment workaround for MPC5121Anatolij Gustschin
MPC5121 FEC requeries 4-byte alignmnent for TX data buffers. This patch is a work around that copies misaligned tx packets to an aligned skb before sending. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27fs_enet: Add support for MPC512x to fs_enet driverAnatolij Gustschin
Extend the fs_enet driver to support MPC512x FEC. Enable it with CONFIG_FS_ENET_MPC5121_FEC option. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27fs_enet: use dev_xxx instead of printkAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-11 20:46:34 +0000