aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-15mmc_block: wait for card even on failuresPierre Ossman
Many failures are non-permanent, but the card might need some time to finish what it is doing before becoming responsive again. Make sure we wait for it to finish programming before dealing with the error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: scatter-gather (ADMA) supportPierre Ossman
Add support for the scatter-gather DMA mode present on newer controllers. As the mode requires 32-bit alignment, non-aligned chunks are handled by using a bounce buffer. Also add some new quirks to handle controllers that have bugs in the ADMA engine. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci-pci: don't penalize newer jmicron chipsPierre Ossman
The upcoming JMicron chips will have solved all the currently known bugs, so don't penalize them for older problems. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc_test: only bind to supported cardsPierre Ossman
We can only perform the tests on MMC and SD cards, so avoid binding to any other type. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdio: clean up handling of byte mode transfer sizePierre Ossman
Make sure that the maximum size for a byte mode transfer is identical in all places. Also tweak the transfer helper so that a single byte mode transfer is preferred over (possibly multiple) block mode request(s). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc,sdio: helper function for transfer paddingPierre Ossman
There are a lot of crappy controllers out there that cannot handle all the request sizes that the MMC/SD/SDIO specifications require. In case the card driver can pad the data to overcome the problems, this commit adds a helper that calculates how much that padding should be. A corresponding helper is also added for SDIO, but it can also deal with all the complexities of splitting up a large transfer efficiently. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15au1xmmc: remove custom carddetect poll implementation.Manuel Lauss
The MMC core provides a carddetect poll feature, time to remove the driver's own implementation of it. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15au1xmmc: abort requests early if no card is present.Manuel Lauss
Don't process an MMC request if no card is present. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15au1xmmc: codingstyle tidying.Manuel Lauss
Clean up the codebase, no functional changes. - merge the au1xmmc.h header contents into the driver file, - indentation, spelling and style fixes. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15au1xmmc: SDIO IRQ support.Manuel Lauss
Wire up the SD controllers' SDIO IRQ capability. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15au1xmmc: enable 4 bit transfer modeManuel Lauss
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15au1xmmc: remove db1200 board code, rewrite probe.Manuel Lauss
Remove the DB1200 board-specific functions (card present, read-only, activity LED methods) and instead add platform data which is passed to the driver. This also allows for platforms to implement other carddetect schemes (e.g. dedicated irq) without having to pollute the driver code. The poll timer (used for pb1200) is kept for compatibility. With the board-specific stuff gone, the driver's ->probe() code can be cleaned up considerably. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15at91_mci: Fix byte mode transitions.Ville Syrjala
The byte mode support fails to clear the byte mode bit in the command register, possibly leaving byte mode enabled with the counters programmed in non-byte mode. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15at91_mci: Cover more AT91RM9200 and AT91SAM9261 errata.Ville Syrjala
According to the documentation the AT91SAM9261 MCI shares the block size limitations of the AT91RM9200 MCI. Also the errata documentation for AT91RM9200 and AT91SAM9261 state that stream commands are not supported. This has not been tested on actual hardware. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15at91_mci: AT91SAM9260/9263 12 byte write erratum (v2)Ville Syrjala
AT91SAM926[0/3] PDC must write at least 12 bytes. The code compiles and runs but the actual condition for this erratum did not trigger in my tests so it's unclear if it actually works as intended. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15at91_mci: manage cmd error and data error independentlyNicolas Ferre
In at91_mci_completed_command() function, this patch distinguishes command error and data error. It reports it in the corresponding error field. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: do not read irq status twice as it will forget some errorsNicolas Ferre
Reading AT91_MCI_SR again at the end of transfer can corrupt the error reporting. Some fields in the SR register are read-and-clear. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: add sdio irq managementEric Benard
Enable SDIO interrupt handling. Signed-off-by: Eric Benard <ebenard@free.fr> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: add multiwrite switchNicolas Ferre
at91_mci is capable of multiwrite. Enable it before it disappears. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: update bytes_xfered value once xfer doneNicolas Ferre
Modify bytes_xfered value after a write. That will report, as accurately as possible, the amount of sectors that are effectively written. This update introduces the check of the busy signal given by the card. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: avoid timeoutsMarc Pignat
The at91 mci controller internal state machine seems to often crash. This can be fixed by resetting the controller after each command for at91rm9200 and by setting the MCI_BLKR register on at91sam926*. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Hans J Koch <hjk@linutronix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: show timeoutsMarc Pignat
Detect command timeout (or mci controller hangs). Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Hans J Koch <hjk@linutronix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: at91_mci: support for block size not modulo 4Marc Pignat
Implement transfer with size not modulo 4 for at91sam9*. Please note that the at91rm9200 simply can't handle this. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15MMC: Trivial comment cleanupDeepak Saxena
Make the variable name in the comments match the actual name of the variable. Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: change .get_ro() callback semanticsAnton Vorontsov
Now get_ro() callback must return 0/1 values for its logical states, and negative errno values in case of error. If particular host instance doesn't support RO/WP switch, it should return -ENOSYS. This patch changes some hosts in two ways: 1. Now functions should be smart to not return negative values in "RO asserted" case (particularly gpio_ calls could return negative values for the outermost GPIOs). Also, board code usually passes get_ro() callbacks that directly return gpioreg & bit result, so at91_mci, imxmmc, pxamci and mmc_spi's get_ro() handlers need take special care when returning platform's values to the mmc core. 2. In case of host instance didn't implement get_ro() callback, it should really return -ENOSYS and let the mmc core decide what to do about it (mmc core thinks the same way as the hosts, so it isn't functional change). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc_spi: add support for card-detection pollingAnton Vorontsov
This patch adds new platform data variable "caps", so platforms could pass theirs capabilities into MMC core (for example, platforms without interrupt on the CD line will most probably want to pass MMC_CAP_NEEDS_POLL). New platform get_cd() callback provided to optimize polling. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: add support for card-detection pollingAnton Vorontsov
Some hosts (and boards that use mmc_spi) do not use interrupts on the CD line, so they can't trigger mmc_detect_change. We want to poll the card and see if there was a change. 1 second poll interval seems resonable. This patch also implements .get_cd() host operation, that could be used by the hosts that are able to report card-detect status without need to talk MMC. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci-pci: unaligned data with ricoh controllersPierre Ossman
The Ricoh controllers cannot handle unaligned data blocks. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc_test: add test case controlPierre Ossman
Add the ability to run just a single test case by writing the test case number into the sysfs "test" file. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: handle hot-removePierre Ossman
Gracefully handle when the device is suddenly removed. Do a test read and avoid any further access if that read returns -1. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: support JMicron secondary interfacePierre Ossman
JMicron chips sometimes have two interfaces to work around limitations in Microsoft's sdhci driver. This patch allows us to use either interface. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: toggle JMicron PMOS settingPierre Ossman
Some of the JMicron chips requires us to manually enable the power output stages of the chip. Add the necessary hooks and functions to manage this. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: make workaround for timeout bug more generalPierre Ossman
Give the quirk for broken timeout handling a better chance of handling more controllers by simply classifying the system as broken and setting a fixed value. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: more complex quirks handlingPierre Ossman
Extend the quirks handling in the PCI driver to be able to have callbacks and not just flags. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: remove forced dma quirksPierre Ossman
Remove the quirk to force DMA on the Ricoh and TI controllers as it is no longer needed. The only bug they have is that they use an incorrect PCI interface value, and that is not respected anymore. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: move pci stuff to separate modulePierre Ossman
The SDHCI interface is not PCI specific, yet the Linux driver was intimitely connected to the PCI bus. This patch properly separates the PCI specific portion from the bus independent code. This patch is based on work by Ben Dooks but he did not have time to complete it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15sdhci: don't check block count for progressPierre Ossman
The specification is insufficiently strict when it comes to how the hardware should update the block count register, making it useless for checking transfer progress. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-14Merge branch 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6Linus Torvalds
* 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6: (64 commits) firmware: convert sb16_csp driver to use firmware loader exclusively dsp56k: use request_firmware edgeport-ti: use request_firmware() edgeport: use request_firmware() vicam: use request_firmware() dabusb: use request_firmware() cpia2: use request_firmware() ip2: use request_firmware() firmware: convert Ambassador ATM driver to request_firmware() whiteheat: use request_firmware() ti_usb_3410_5052: use request_firmware() emi62: use request_firmware() emi26: use request_firmware() keyspan_pda: use request_firmware() keyspan: use request_firmware() ttusb-budget: use request_firmware() kaweth: use request_firmware() smctr: use request_firmware() firmware: convert ymfpci driver to use firmware loader exclusively firmware: convert maestro3 driver to use firmware loader exclusively ... Fix up trivial conflicts with BKL removal in drivers/char/dsp56k.c and drivers/char/ip2/ip2main.c manually.
2008-07-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits) [ARM] 5171/1: ep93xx: fix compilation of modules using clocks [ARM] 5133/2: at91sam9g20 defconfig file [ARM] 5130/4: Support for the at91sam9g20 [ARM] 5160/1: IOP3XX: gpio/gpiolib support [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits. [ARM] 5084/1: zylonite: Register AC97 device [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state [ARM] 5144/1: pxaficp_ir: cleanup includes [ARM] pxa: remove pxa_set_cken() [ARM] pxa: allow clk aliases [ARM] Feroceon: don't disable BPU on boot [ARM] Orion: LED support for HP mv2120 [ARM] Orion: add RD88F5181L-FXO support [ARM] Orion: add RD88F5181L-GE support [ARM] Orion: add Netgear WNR854T support [ARM] s3c2410_defconfig: update for current build [ARM] Acer n30: Minor style and indentation fixes. ...
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
Conflicts: sound/pci/Kconfig
2008-07-14[ARM] Merge most of the PXA work for initial mergeRussell King
This includes PXA work up to the SPI changes for the initial merge, since e172274ccc55d20536fbdceb6131f38e288541e0 depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
2008-07-14Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits) IB/umad: BKL is not needed for ib_umad_open() IB/uverbs: BKL is not needed for ib_uverbs_open() bf561-coreb: BKL unneeded for open() Call fasync() functions without the BKL snd/PCM: fasync BKL pushdown ipmi: fasync BKL pushdown ecryptfs: fasync BKL pushdown Bluetooth VHCI: fasync BKL pushdown tty_io: fasync BKL pushdown tun: fasync BKL pushdown i2o: fasync BKL pushdown mpt: fasync BKL pushdown Remove BKL from remote_llseek v2 Make FAT users happier by not deadlocking x86-mce: BKL pushdown vmwatchdog: BKL pushdown vmcp: BKL pushdown via-pmu: BKL pushdown uml-random: BKL pushdown uml-mmapper: BKL pushdown ...
2008-07-14dsp56k: use request_firmwareJaswinder Singh
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14edgeport-ti: use request_firmware()Jaswinder Singh
Firmware blob looks like this... uint8_t MajorVersion uint8_t MinorVersion __le16 BuildNumber uint8_t data[] Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14edgeport: use request_firmware()Jaswinder Singh
Version number provided in first HEX record. Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14vicam: use request_firmware()Jaswinder Singh
Although it wasn't actually using ihex records before, we use the Intel HEX record format for this firmware -- because that gives us a simple way to split it into separate chunks internally as we need, without loading each part as a separate file. Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14dabusb: use request_firmware()David Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14cpia2: use request_firmware()David Woodhouse
Thanks for Jaswinder Singh for converting the firmware blob itself to ihex. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14Merge commit 'v2.6.26' into bkl-removalJonathan Corbet
2008-07-14Merge branch 'x86/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (821 commits) x86: make 64bit hpet_set_mapping to use ioremap too, v2 x86: get x86_phys_bits early x86: max_low_pfn_mapped fix #4 x86: change _node_to_cpumask_ptr to return const ptr x86: I/O APIC: remove an IRQ2-mask hack x86: fix numaq_tsc_disable calling x86, e820: remove end_user_pfn x86: max_low_pfn_mapped fix, #3 x86: max_low_pfn_mapped fix, #2 x86: max_low_pfn_mapped fix, #1 x86_64: fix delayed signals x86: remove conflicting nx6325 and nx6125 quirks x86: Recover timer_ack lost in the merge of the NMI watchdog x86: I/O APIC: Never configure IRQ2 x86: L-APIC: Always fully configure IRQ0 x86: L-APIC: Set IRQ0 as edge-triggered x86: merge dwarf2 headers x86: use AS_CFI instead of UNWIND_INFO x86: use ignore macro instead of hash comment x86: use matching CFI_ENDPROC ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-08 23:06:30 +0000