aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-21USB: quirks for known quirky audio devicesOliver Neukum
RESET_RESUME entries for some sound devices that need it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix previous sparse fix which was incorrectDavid Brownell
The previous fix for a "sparse" warning in ehci_urb_dequeue() was incorrect. After rescheduling interrupt transfers it returned the URB's completion status, not status for the dequeue operation itself. This patch resolves that issue, cleans up the code in the reschedule path, and shrinks the object code by a dozen bytes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix error handling in trancevibratorOliver Neukum
trancevibrator should not pretend success if it returns an error. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: g_printer, fix empty if statementAdrian Bunk
A bug every C programmer makes at some point in time... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Craig W. Nadler <craig@nadler.us> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: ehci-fsl: mpc834x config symbol is PPC_MPC834x, not MPC834xPeter Korsgaard
The config symbol for mpc834x processors is CONFIG_PPC_MPC834x, not CONFIG_MPC834x. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix usb open suspend race in cdc-acmOliver Neukum
this fixes a race between open and disconnect in the CDC ACM driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: usb: yet another Dell wireless CDMA/EVDO modemAndy Shevchenko
Add native support of the Dell wireless CDMA/EVDO modem. # modprobe usbserial vendor=0x413c product=0x8129 Following seesion lines describe modem itself at OK ati3 Manufacturer: NOVATEL WIRELESS INCORPORATED Model: EXPEDITE ET620 Revision: M6500C-BBIRD_TLS_MINI_DELL-Q40306.166 [Aug 25 2006 14:00:00] ESN: 0x5B39071D +GCAP: +CIS707-A, CIS-856, +MS, +ES, +DS, +FCLASS OK Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix pm counter leak in usblpOliver Neukum
if you fail in open() you must decrement the pm counter again. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
2008-02-21USB: Sane memory allocation in option driverOliver Neukum
The option driver - violates DMA coherency rules - allocates ~16500 bytes in one chunk This patch splits out the buffers and uses __get_free_page() to avoid higher order allocations. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-By: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: ftdi_sio.c add missing '|'Roel Kluin
add missing '|' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20libata: fix kernel-doc parameter warningRandy Dunlap
Fix libata kernel-doc parameter: Warning(linux-2.6.25-rc2-git3//drivers/ata/libata-scsi.c:845): No description found for parameter 'rq' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20sata_mv: remove iounmap in mv_platform_remove and use devm_iomapSaeed Bishara
this will fix crash bug when doing rmmod to the driver, this is because the port_stop function get called later and it could access the device's registers. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20libata: implement libata.force module parameterTejun Heo
This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20sata_mv: use hpriv->base instead of the host->iomapSaeed Bishara
this fixes crash bug as the iomap table is not valid for integrated controllers. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20sata_mv: Define module alias for platform deviceMartin Michlmayr
The sata_mv driver can be loaded as a platform device, as is done by various Orion (ARM) based devices. The driver needs to define a module alias for the platform driver so udev will load it automatically. Tested with Debian on a QNAP TS-209. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20ata: fix sparse warnings in pata_legacy.cHarvey Harrison
Use ld_qdi and ld_winbond to avoid shadowing static int variables qdi and winbond. The ld_ prefix refers to legacy_data. drivers/ata/pata_legacy.c:777:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:811:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:848:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:882:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:1040:21: warning: symbol 'winbond' shadows an earlier one drivers/ata/pata_legacy.c:129:12: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19Merge branch 'agp-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp: fix missing casts that produced a warning. agp: add support for 662/671 to agp driver fix historic ioremap() abuse in AGP agp/sis: Suspend support for SiS AGP agp/sis: Clear bit 2 from aperture size byte as well
2008-02-19Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/sis: add pciid for SiS 662/671 chipset drm: add new rv380 pciid drm: add support for passing state into the suspend hooks. drm/i915: Fix hibernate save/restore of VGA attribute regs drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE) drm/i915: restore pipeconf regs unconditionally drm/i915: save/restore interrupt state drm: convert drm from nopage to fault. i915: wrap chipset types requiring hw status set ioctl drm/radeon: add initial rs690 support to drm.
2008-02-20agp: fix missing casts that produced a warning.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20agp: add support for 662/671 to agp driverChaoyu Chen
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20drm/sis: add pciid for SiS 662/671 chipsetChaoyu Chen
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20drm: add new rv380 pciidMirko
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20drm: add support for passing state into the suspend hooks.Dave Airlie
fix i915 driver to use state for hibernate save avoidance. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-19dm-raid1.c: fix NULL dereferencesAdrian Bunk
This patch fixes two NULL dereferences introduced by commit 06386bbfd2441416875d0403d405c56822f6ebac and spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc() IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times out
2008-02-20drm/i915: Fix hibernate save/restore of VGA attribute regsJesse Barnes
In hibernate, we may end up calling the VGA save regs function twice, so we need to make sure it's idempotent. That means leaving ARX in index mode after the first save operation. Fixes hibernate on 965. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)Keith Packard
Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on the VGA output on my HP 2510p after resume. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20drm/i915: restore pipeconf regs unconditionallyJesse Barnes
On many chipsets, the checks for DPLL enable or VGA mode will prevent the pipeconf regs from being restored, which could result in a blank display or X failing to come back after resume. So restore them unconditionally along with actually restoring pipe B's palette correctly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-20drm/i915: save/restore interrupt stateJesse Barnes
On resume, if the interrupt state isn't restored correctly, we may end up with a flood of unexpected or ill-timed interrupts, which could cause the kernel to disable the interrupt or vblank events to happen at the wrong time. So save/restore them properly. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-20drm: convert drm from nopage to fault.Nick Piggin
Remove redundant vma range checks. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-20i915: wrap chipset types requiring hw status set ioctlZhenyu Wang
Also applys to recent added new chipset. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-20drm/radeon: add initial rs690 support to drm.Maciej Cencora
This adds support for configuring the RS690 GART. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-19IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc()Roland Dreier
When mthca_fmr_alloc() returns an error, it should free the MPT at the index key, not mr->ibmr.lkey, since the lkey has been mangled by hw_index_to_key() and no longer is the real index. This bug causes corruption of the MPT table free bitmap when mthca_fmr_alloc() fails. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-19IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times outPradeep Satyanarayana
Commit efcd9971 ("IPoIB/cm: Factor out ipoib_cm_free_rx_reap_list()") introduced a bug in ipoib_cm_dev_stop() when the receive drain times out. In that case, the function moves all the pending rx stuff into a private list but then calls ipoib_cm_free_rx_reap_list(), which handles a different list. Fix this by moving everything to the rx_reap_list that will actually get freed up. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=906>. Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-19Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] qdio: FCP/SCSI write I/O stagnates on LPAR [S390] Fix futex_atomic_cmpxchg_std inline assembly. [S390] dcss: Fix Unlikely(x) != y [S390] sclp: clean up send/receive naming scheme [S390] etr: fix compile error on !SMP [S390] qdio: fix qdio_activate timeout handling. [S390] Initialize per cpu lowcores on cpu hotplug. [S390] find bit corner case. [S390] dasd: fix locking in __dasd_device_process_final_queue [S390] Make sure enabled wait psw is loaded in default_idle. [S390] Let NR_CPUS default to 32/64 on s390/s390x. [S390] cio: Do timed recovery on workqueue. [S390] cio: Remember to initialize recovery_lock.
2008-02-19Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: libata: implement drain buffers libata: eliminate the home grown dma padding in favour of block: clear drain buffer if draining for write command block: implement request_queue->dma_drain_needed block: add request->raw_data_len block: update bio according to DMA alignment padding libata: update ATAPI overflow draining elevator: make elevator_get() attempt to load the appropriate module cfq-iosched: add hlist for browsing parallel to the radix tree block: make blk_rq_map_user() clear ->bio if it unmaps it fs/block_dev.c: remove #if 0'ed code make struct def_blk_aops static make blk_settings_init() static make blk_ioc_init() static make blk-core.c:request_cachep static again
2008-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] HP ProLiant WatchDog driver [WATCHDOG] blackfin Watchdog driver: relocate all strings used in __init functions to __initdata [WATCHDOG] Convert mtx1 wdt to be a platform device and use generic GPIO API [WATCHDOG] Add support for SB1 hardware watchdog
2008-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add regs_return_value(). [SPARC64]: Kill pcic_present(). [SPARC]: Kill 'prom_palette'. [ATYFB]: Kill 'prom_palette' sparc code. [SPARC64]: Kill 'prom_keyboard'. [SPARC]: Kill extern decl of 'panic_setup'. [SPARC64]: Delete 'boot_flags'. [SPARC64]: Kill unused function 'kernel_enter_debugger'. [SPARC64] arch/sparc64/kernel/unaligned.c: Use time_* macros [SPARC64]: Always register a PROM based early console. [SPARC64]: Update defconfig. [SPARC64]: Add -mtune=ultrasparc3 if possible. [SPARC64]: Remove Makefile code for ancient gcc and binutils. [SPARC64]: Remove DEBUG_BOOTMEM. [SPARC64]: Use shorter "get_zeroed_page" call. [SPARC]: Use shorter form of "get_zeroed_page". [SPARC]: video/cg14.c and video/sbuslib.c build fixes
2008-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits) [NIU]: Bump driver version and release date. [NIU]: Fix BMAC alternate MAC address indexing. net: fix kernel-doc warnings in header files [IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route. [IPV6]: dst_entry leak in ip4ip6_err. (resend) bluetooth: do not move child device other than rfcomm bluetooth: put hci dev after del conn [NET]: Elminate spurious print_mac() calls. [BLUETOOTH] hci_sysfs.c: Kill build warning. [NET]: Remove MAC_FMT net/8021q/vlan_dev.c: Use print_mac. [XFRM]: Fix ordering issue in xfrm_dst_hash_transfer(). [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros [IPV6]: Fix hardcoded removing of old module code [NETLABEL]: Move some initialization code into __init section. [NETLABEL]: Shrink the genl-ops registration code. [AX25] ax25_out: check skb for NULL in ax25_kick() [TCP]: Fix tcp_v4_send_synack() comment [IPV4]: fix alignment of IP-Config output Documentation: fix tcp.txt ...
2008-02-19[S390] qdio: FCP/SCSI write I/O stagnates on LPARUrsula Braun
If running on LPAR, qdio might overlook an incoming buffer in certain scenarios. The patch makes sure that incoming buffers are detected immediately in all situations. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] dcss: Fix Unlikely(x) != yRoel Kluin
Fix Unlikely(x) != y Cc: Gerald Schaefer <geraldsc@de.ibm.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] sclp: clean up send/receive naming schemePeter Oberparleiter
Make state change events adjust the correct mask by cleaning up naming inconsistencies. Also remove chance for lockup by removing unnecessary mask related check before reading events. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] qdio: fix qdio_activate timeout handling.Heiko Carstens
Current code in qdio_activate waits for at least 5 seconds until it returns. It may return earlier if an error occurs, but not if everything is ok. This large timeout value became visible with commit dfa77f611ff295598e218aa0eb6efa73a5cf26d0 "qdio: set QDIO_ACTIVATE_TIMEOUT to 5s", which intended to fix the timeout value which was zero. In turn setting an FCP adapter online took 5 seconds. In practice waiting for 5ms before continuing is sufficient as pointed out by Utz Bacher and Cornelia Huck. Cc: Utz Bacher <utz.bacher@de.ibm.com> Cc: Jan Glauber <jan.glauber@de.ibm.com> Cc: Ursula Braun <braunu@de.ibm.com> Cc: Martin Peschke <mp3@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] dasd: fix locking in __dasd_device_process_final_queueStefan Weinhuber
After setting the status of the cqr and releasing the lock for the block cqr queue, we call the cqr callback function, which will usually just trigger the dasd_block_tasklet. But when the tasklet is already running the cqr might be processed before we invoke the callback function. In rare cases the callback pointer may already be invalid by the time we want to call it, which will result in a panic. Solution: Call the callback function first and then release the lock. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] cio: Do timed recovery on workqueue.Cornelia Huck
We can't do our recovery in softirq context, so we schedule it from our timer function. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] cio: Remember to initialize recovery_lock.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19libata: implement drain buffersJames Bottomley
This just updates the libata slave configure routine to take advantage of the block layer drain buffers. It also adjusts the size lengths in the atapi code to add the drain buffer to the DMA length so the driver knows it can rely on it. I suspect I should also be checking for AHCI as well as ATA_DEV_ATAPI, but I couldn't see how to do that easily. tj: * atapi_drain_needed() added such that draining is applied to only misc ATAPI commands. * q->bounce_gfp used when allocating drain buffer. * Now duplicate ATAPI PIO drain logic dropped. * ata_dev_printk() used instead of sdev_printk(). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19libata: eliminate the home grown dma padding in favour ofJames Bottomley
that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19block: add request->raw_data_lenTejun Heo
With padding and draining moved into it, block layer now may extend requests as directed by queue parameters, so now a request has two sizes - the original request size and the extended size which matches the size of area pointed to by bios and later by sgs. The latter size is what lower layers are primarily interested in when allocating, filling up DMA tables and setting up the controller. Both padding and draining extend the data area to accomodate controller characteristics. As any controller which speaks SCSI can handle underflows, feeding larger data area is safe. So, this patch makes the primary data length field, request->data_len, indicate the size of full data area and add a separate length field, request->raw_data_len, for the unmodified request size. The latter is used to report to higher layer (userland) and where the original request size should be fed to the controller or device. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19libata: update ATAPI overflow drainingTejun Heo
For misc ATAPI commands which transfer variable length data to the host, overflow can occur due to application or hardware bug. Such overflows can be ignored safely as long as overflow data is properly drained. libata HSM implementation has this implemented in __atapi_pio_bytes() and recently updated for 2.6.24-rc but it requires further improvements. Improve drain logic such that... * Report overflow errors using ehi desc mechanism instead of printing directly. * Properly calculate the number of bytes to be drained considering actual number of consumed bytes for partial draining. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 23:09:05 +0000