aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-02-12drivers/net/skge.c: Use netif_printk macrosJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12drivers/net/qlge: Use netif_printk helpersJoe Perches
Convert QPRINTK macros to netif_<level> equivalents. Expands and standardizes the logging message output. Removes __func__ from most logging messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12drivers/net/jme: Use netif_printk helpersJoe Perches
Convert uses of msg_<type> to netif_<level>( Remove msg_<type> macros Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12drivers/net/r8196.c: Use netif_printk macrosJoe Perches
Simplify the logic a bit, make the message logs a bit more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12drivers/net/atl1e: Use netdev_printk helpersJoe Perches
Logging messages sometimes had duplicated "ATL1E" output. For instance: ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> is now: ATL1E 0000:03:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex> Add some consistency to logging messages Add some missing \n's to logging messages Miscellaneous typo spelling corrections Change atl1e_validate_option argument from pdev to adapter Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix in be_read_eepromAjit Khaparde
The offset to read the eeprom data was missing and wrong eeprom data was being dumped. This patch fixes this. >From Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: remove ASIC generation number from KconfigAjit Khaparde
Since the driver is supporting multiple generations of the ASIC don't mention any ASIC generation number. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: change the driver descriptionAjit Khaparde
Since the driver is supporting multiple generations of the ASIC remove ASIC generation information from the driver description. This information is displayed by modinfo. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: fix to limit max vlans supported in certain skewsAjit Khaparde
In certain skews the ASIC can support only 16 vlans per interface. Once the limit is crossed, the ASIC is programmed in vlan promiscuous mode. Switch off the vlan promiscuous mode once the number of vlans falls back to the max vlans supported. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: minor code optimizationsAjit Khaparde
Couple of code optimizations in the Rx path (to avoid a memset). From: Sathya P <sathyap@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix in be_change_mtuAjit Khaparde
Current code allows the new mtu to cross the supported value. This patch fixes the boundary checks. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix for flashing the BladeEngine3 ASICAjit Khaparde
Now flashing both BE2 and BE3 devices is supported. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: remove unused pci device idAjit Khaparde
We are not going to use this device id. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12virtio_net: remove send queueShirley Ma
Now we have a virtio detach API (in commit f9bfbebf34eab707b065116cdc9699d25ba4252a), we don't need to track xmit skbs in the virio_net driver, which improves transmission performance. Signed-off-by: Shirley Ma <xma@us.ibm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: Makefile change for KSZ884X driverTristram Ha
Add Micrel KSZ884X network driver for KSZ8841/KSZ8842 PCI Ethernet chips. Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: Kconfig change for KSZ884X driverTristram Ha
Add Micrel KSZ8841/KSZ8842 PCI Ethernet chip support. Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: Micrel KSZ8841/2 PCI Ethernet driverTristram Ha
This is a new network driver for Micrel KSZ8841/KSZ8842 PCI Ethernet chips. The same driver can run both chips at the same time. It supports IPv4 TCP hardware checksumming and so can use scatter/gather transmission. The KSZ8842 switch has 2 ports. Some users like to take direct control of those ports. So KSZ8842 has a multiple devices mode in which the driver creates another network device so that users can specify which port to send packets. This mode is enabled by passing the "multi_dev=1" parameter to the driver during loading. The KSZ884X can receive huge frames with size up to 1916 bytes. To use this feature change the network device MTU from 1500 to 1898. The KSZ884X driver has 3 packet receive processing functions for the normal mode, multiple devices mode, and huge frame mode. Those functions are identical except for more checking for the new features. In normal programming point of view the huge frame version is the one to use because it covers all the cases, but this is done for performance consideration because the target clients for the KSZ884X chips are embedded systems, which unlike desktop PC may not have powerful CPU. Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: move am79c961's probe function to .devinit.textUwe Kleine-König
A pointer to am79c961_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12macb: straighten out macb_mii_probe functionJiri Pirko
Use "phy_find_first" instead of manual lookup. Also use "phy_connect_direct" instead of "phy_connect" since we already have phy_device pointer here. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10ixgbe: Bump driver version upPeter Waskiewicz
Driver has gone under significant changes, the version should reflect that. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10ixgbe: Add support for the new ethtool n-tuple programming interfacePeter Waskiewicz
This patch adds n-tuple filter programming to 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10sky2: receive checksum refactoringstephen hemminger
Break the largish case for handling receive checksum into a separate function, and if there is a problem use dev_XXX routines to show which hardware is the problem. Turn one corner case into a BUG(). This only happens if the driver is expecting one behavior but the chip does the old behavior; only ever saw this when bringing up a new chip type and driver was buggy. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10sky2: disable ASF on Yukon Supremestephen hemminger
Clone of vendor code to disable ASF on Extreme and Supreme chips. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10sky2: resume clocksstephen hemminger
Change the resume path to use pci write config for a couple of reasons: 1. pci_write_config_dword() allows for more error checking of PCI health after resume. 2. better to toggle this register on all chip types, since that is what vendor driver does. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10fec: Add ARCH_MX5 as a dependencyAmit Kucheria
i.MX51 babbage board has a FEC ethernet controller Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10fec: Add LAN8700 phy supportAmit Kucheria
The i.MX51 babbage board has a FEC ethernet controller with this phy. In the long term we should resurrect the phylib patches for fec. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10fec: fix uninitialized rx buffer usageRob Herring
The fec driver was enabling receive buffer descriptor without allocating the buffers. Make sure the buffer descriptors are initialized to not start receiving packets. Open also calls fec_restart after the rx buffers are allocated. With the code in fec_restart, it zeroes out the buffer descriptors that have just been setup. Signed-off-by: Rob Herring <r.herring@freescale.com> Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6
2010-02-08drivers/net: Correct NULL testJulia Lawall
Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08cxgb3: fix GRO checksum checkDivy Le Ray
Verify the HW checksum state for frames handed to GRO processing. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-05net: e1000e: convert to use mc helpersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-05net: dm9601: convert to use mc helpersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-05net: 8139too: convert to use mc helpersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-05net: 8139cp: convert to use mc helpersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04e1000e: Fix namespace conflicts wrt. e1000_has_linkDavid S. Miller
Reported by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04qlge: Code clean upBreno Leitao
Just reordering this assignment that doesn't depend on any condition. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04qlge: removing unreachable block of codeBreno Leitao
Currently the qlge_change_mtu() is never called if the new_mtu is equal current MTU, due this condition on dev_set_mtu(): if (new_mtu == dev->mtu) return 0; So, this block of code is never reached and is being removed. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04qlge: Add watchdog timer.Ron Mercer
Add periodic heartbeat register read to trigger the eeh recovery process. We see cases where an eeh error was injected and the slot was suspended. An asic access attempt is required to flush the recovery process, but without interrupts the process can stall. Adding this periodic register read causes the recovery process to begin. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04libphy: add phy_find_first functionJiri Pirko
Many drivers do this in them manually. Now they can use this function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04igb: make certain to reassign legacy interrupt vectors after resetAlexander Duyck
This change corrects an issue that will cause false hangs when using either 82575 or 82580 in legacy interrupt mode. The issue is caused when there is a slow traffic flow and an "ethtool -r" is executed while using legacy or MSI interrupts. MSI-X is not affected by this issue due to the fact that we were already reconfiguring the vectors after reset. If possible it would be best to push this for net-2.6 since it is resolving a bug but if that is not possible then net-next-2.6 will be fine. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04stmmac: fix 'lenght' typo in comments and codeGiuseppe Cavallaro
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04can: ems_usb: removed duplicated code setting local echo supportThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-03sky2: Flow control frames recorded as dropped packetsStephen Hemminger
Thanks for your patch. A more general solution would be to move the rx_dropped up into sky2_receive. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sky2: hand receive DMA mapping failuresstephen hemminger
If receive buffer mapping failed, then it was possible to get stuck with unmapped receive buffer in DMA ring. This would be an extremely rare condition because the driver had just released the map for the last receive so it should be able to get another map again (in soft-irq). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03can: mcp251x: Move to threaded interrupts instead of workqueues.Christian Pellegrin
This patch addresses concerns about efficiency of handling incoming packets. Handling of interrupts is done in a threaded interrupt handler which has a smaller latency than workqueues. This change needed a rework of the locking scheme that was much simplified. Some other (more or less longstanding) bugs are fixed: utilization of just half of the RX buffers, useless wait for interrupt on open, more reliable reset sequence. The MERR interrupt is not used anymore: it overloads the CPU in error-passive state without any additional information. One shot mode is disabled because it's not clear if it can be handled efficiently on this CAN controller. Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03bonding: Remove net_device_stats from bonding structAjit Khaparde
There is no need to maintain stats in the bonding structure. Use the instance of net_device_stats in netdevice. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03drivers/net/davinci_emac.c: Fix continuation line formatsJoe Perches
String constants that are continued on subsequent lines with \ are not good. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-17 22:48:39 +0000