aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-10-12iwlwifi: change the order of freeing memoryWey-Yi Guy
Need to free the dynamic allocated memory before ieee80211_free_hw(); once call ieee80211_free_hw(), should not reference to "priv" data structure. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-12acenic: Pass up error code from ace_load_firmware()Ben Hutchings
If ace_load_firmware() fails, ace_init() cleans up but still returns 0, leading to an oops as seen in <http://bugs.debian.org/521383>. It should pass the error code up. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add main functions to support bnx2x devices.Michael Chan
Add iSCSI support for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Add bnx2x data structures.Michael Chan
Add hardware and software structures for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11cnic: Refactor some code.Michael Chan
Refactor ring init. code for subsequent 10G patches. Also add rtnl_lock() in cnic_uio_open() to prevent race condition with netdev events. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Add main CNIC interface functions.Michael Chan
Add the main CNIC registration, callback, MAC addr. setup functions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Add hw init code to support iSCSI.Michael Chan
Add code to initialize hardware blocks used for iSCSI. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Refactor MAC address setup code.Michael Chan
For iSCSI MAC address setup in later patches. Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11bnx2x: Refactor bnx2x_sp_post().Michael Chan
Some of the SPQ (slow-path queue) operations will be used by the cnic code in later patches. Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Add CBFC pause frame counters to ethtool stats.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Don't fail open when port is not initialized.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Get rid of firmware handler debug code.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Remove inline math for small rx buf mapping.Ron Mercer
rx_ring->sbq_buf_len now holds the length of the mapped portion of the buffer rather than the overall length. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Store firmware revision as early as possible.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Add handler for DCBX firmware event.Ron Mercer
The driver has nothing to do, but this marker prevents the event from showing up 'not handled'. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Set PCIE max read request size.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11qlge: Remove explicit setting of PCI Dev CTL reg.Ron Mercer
Remove explicit setting of error reporting bits. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-10-09net: Link in PHY drivers before others.David S. Miller
We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09wireless: make wireless drivers select coreJohannes Berg
It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09libertas: depend on CONFIG_CFG80211Holger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09libertas: remove double assignment of dev->netdev_opsLuis R. Rodriguez
This came in through the patch titled: libertas: first stab at cfg80211 support I only noticed it because it breaks compat-wireless :) Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-09ath9k: use right parameter for MODULE_PARM_DESC() for debugLuis R. Rodriguez
Reported-by: sujith.manoharan@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ixgbe: Fix KR to KX fail over for Mezzanine cardsDon Skidmore
This patch allows the recently added backplane device IDs that support KR to fail over to KX during link setup. This is accomplished by the new MAC link setup function ixgbe_setup_mac_link_smartspeed(). Comments were also updated to better document the reason for the delays chosen for KX, KX4, BX, BX4 and KR connections. Signed-off-by: Don Skidmore <don.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ixgbe: add support for 82599 based Express Module X520-P2Don Skidmore
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ibm_newemac: Added 16K Tx FIFO size support for EMAC4Dave Mitchell
Some of the EMAC V4 implementations support 16K Tx FIFOs. This patch adds support for this functionality and fixes typos in the Tx FIFO size error messages. Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Add disable/enable firmare irqs to handler.Ron Mercer
This was accidentally omitted from one of the previous patches for firmware event handling. The handler needs to the enable firmware irq mask when it's done processing or it may not get any more events interrupts. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Restore rx mode after internal reset.Ron Mercer
Call set_multi API after reset recovery. This was exposed by tripping tx_timeout. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix chip reset process.Ron Mercer
Add wait for NIC fifo and MGMNT fifo to empty before applying reset. Otherwise broken frames can be processed by management processor and cause it to hang. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix RX multicast filter settings.Ron Mercer
The addresses were being added to the filter properly, but were not being enabled. This adds enable bit to filter write. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix frame routing for multicast frames.Ron Mercer
Broadcast/multicast should always be routed to the default (zeroeth) rx ring. Broadcast frames are already routed correctly. This fixes routing for multicast frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix frame routing issue related to bonding.Ron Mercer
Currently frames are routed based on their type and MAC address. This patch adds the port number on which the frame arrived to the routing. This prevents problems in the case where both interfaces have the same MAC address in a routing configuration. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08qlge: Fix RSS hashing values.Ron Mercer
Fix RX queue table size and change from random to default hash values. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-07znet: Don't claim DMA lock around free_dma() calls.David S. Miller
It's not necessary and it's illegal too. Reported-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07can: add TI CAN (HECC) driverAnant Gole
TI HECC (High End CAN Controller) module is found on many TI devices. It has 32 hardware mailboxes with full implementation of CAN protocol 2.0B with bus speeds up to 1Mbps. Specifications of the module are available on TI web <http://www.ti.com> Signed-off-by: Anant Gole <anantgole@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ixgb: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07qlge: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07e1000: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07igb: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ixgbe: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07myri10ge: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private myri10ge_priv structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07netxen: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07e1000e: Use the instance of net_device_stats from net_device.Ajit Khaparde
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: remove useless assignmentNicolas de Pesloüan
The variable old_active is first set to bond->curr_active_slave. Then, it is unconditionally set to new_active, without being used in between. The first assignment, having no side effect, is useless. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: fix a parameter name in error messageNicolas de Pesloüan
When parsing module parameters, bond_check_params() erroneously use 'xor_mode' as the name of a module parameter in an error message. The right name for this parameter is 'xmit_hash_policy'. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07libertas: remove extraneous select FW_LOADERHolger Schurig
As kindly pointed out by Andrey Yurovsky, CONFIG_LIBERTAS already selects FW_LOADER. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: Use lbs_is_cmd_allowed() check in command handling routines.Amitkumar Karwar
lbs_is_cmd_allowed() check is added in __lbs_cmd_async() and lbs_prepare_and_send_command(). The check is removed from other places. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: rename ath_beaconq_setup() to ath9k_hw_beaconq_setup()Luis R. Rodriguez
And move it to hw code on mac.c where it belongs. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 15:27:13 +0000