aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-03-24Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: panel-generic: re-implement mode changing OMAP: DSS2: initialize dss clk sources properly OMAP: DSS2: VRAM: Fix early_param for vram
2010-03-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTON [ARM] Kirkwood: WPS button keycode mapping pxa168fb: fix incorrect resource calculation [ARM] pxa/raumfeld: fix button name [ARM] pxa/raumfeld: remove duplicated #include [ARM] locomo: fix unpaired spin_lock_irqsave [ARM] locomo: fix SPI register offset [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms [ARM] pxa: remove spi cs gpio direction to avoid clash with driver [ARM] mmp: fix for variables in uncompress.h being discarded [ARM] pxa: fix for variables in uncompress.h being discarded ARM: Update mach-types ARM: Fix IXP23xx build error in mach/memory.h
2010-03-24Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-sff: fix spurious IRQ handling pata_via: Add VIA VX900 support
2010-03-24Merge branch 'sh/for-2.6.34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Silence unintialized variable warnings in dwarf unwinder. sh: Tidy up a couple of section mismatches. sh: Fix build after dynamic PMB rework sh: Replace unsafe manipulation of MMUCR sh: Flush ITLB too in PTEAEX's flush_tlb_page() sh64: Remove long unused mid_sched macro SH: remove superfluous warning from the serial driver SH: fix SCIFA SCASCR register bit definitions serial: sh-sci: fix SH-Mobile SH breakage sh: Add watch-dog register address for SH7722/SH7723/SH7724 sh: ms7724: Add tiny-document for sound sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init
2010-03-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: fix dangling pointers lp3971: Fix BUCK_VOL_CHANGE_SHIFT logic lp3971: Fix setting val for LDO2 and LDO4 regulator: Get rid of lockdep warning regulator: handle kcalloc() failure Regulators: max8925-regulator - clean up driver data after removal
2010-03-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Stop trying to use ACPI lid status to determine LVDS connection. drm/intel: fix up set_tiling for untiled->tiled transition drm/i915: Set up the documented clock gating on Sandybridge and Ironlake. agp/intel: Don't do the chipset flush on Sandybridge. agp/intel: Respect the GTT size on Sandybridge for scratch page setup. drm/i915: fix small leak on overlay error path drm/i915: Avoid NULL deref in get_pages() unwind after error. drm/i915: Fix check with IS_GEN6 drivers/gpu/drm/i915/intel_bios.c: fix continuation line formats drm/i915: Enable VS timer dispatch. drm/i915: Rename FBC_C3_IDLE to FBC_CTL_C3_IDLE to match other registers drm/i915: remove an unnecessary wait_request() drm/i915: Don't bother with the BKL for GEM ioctls.
2010-03-24Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-scmi: Provide module aliases for automatic loading i2c-scmi: Support IBM SMBus CMI devices acpi: Support IBM SMBus CMI devices
2010-03-24Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix boot failures with compressed kernels [S390] fix broken proc interface for sclp_async [S390] sclp: avoid 64 bit division [S390] dasd: check tsb validity [S390] dasd: fix alignment of transport mode recovery TCW [S390] system.h: Fix compile error for 1 and 2 byte cmpxchg [S390] smp: fix lowcore allocation [S390] zcore: CPU registers are not saved under LPAR
2010-03-24lxfb: set the H- and V-SYNC polarity of the flatpanel outputMichael Grzeschik
Fixup for the flatpanel output. The geode_modedb attribute flags are used to set the SYNC polarity of the flatpanel. Without this patch our flatpanel registers stayed unconfigured, so we just saw garbage output. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24mmc: fix incorrect interpretation of card type bitsAdrian Hunter
In the extended CSD register the CARD_TYPE is an 8-bit value of which the upper 6 bits were reserved in JEDEC specifications prior to version 4.4. In version 4.4 two of the reserved bits were designated for identifying support for the newly added High-Speed Dual Data Rate. Unfortunately the mmc_read_ext_csd() function required that the reserved bits be zero instead of ignoring them as it should. This patch makes mmc_read_ext_csd() ignore the CARD_TYPE bits that are reserved or not yet supported. It also stops the function jumping to the end as though an error occurred, when it is only warns that the CARD_TYPE bits (that it does interpret) are invalid. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24c2port: fix device_create() return value checkJani Nikula
Use IS_ERR() instead of comparing to NULL. [akpm@linux-foundation.org: preserve the error code] Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24drivers/gpio/max730x.c: add license macroRichard Röjfors
According to the header in max730x it is licensed GPLv2. Add a MODULE_LICENSE to avoid getting the kernel tainted. [w.sang@pengutronix.de: add MODULE_AUTHOR and MODULE_DESCRIPTION also] Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24rtc/mc13783: fix use after free bugUwe Kleine-König
This was introduced by v2.6.34-rc1~38: 4c014e8 (rtc/mc13783: protect rtc {,un}registration by mc13783 lock) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24firewire: core: align driver match with modaliasStefan Richter
The driver match strategy was: - Match vendor/model/specifier/version of the unit directory. - If that was a miss, match vendor from the root directory and model/specifier/version of the unit directory. This was inconsistent with how the modalias string was constructed until recently (take vendor/model from root directory and specifier/ version from unit directory). It was also inconsistent with how it is done since the parent commit: - Use vendor/model/specifier/version of the unit directory if possible, - fall back to one or more of vendor/model/specifier/version from the root directory depending on which ones are not present at the unit directory. Fix this inconsistency by sharing the ROM scanner function between modalias printer function and driver match function. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-24firewire: core: fix Model_ID in modaliasStefan Richter
The modalias string of devices that represent units on a FireWire node did not show Module_ID entries within unit directories. This was because firewire-core searched only the root directory of the configuration ROM for a Model_ID entry. We now search first the root directory, then the unit directory. IOW honor a unit directory's Model_ID if present, otherwise fall back to the root directory's model ID (if present). Furthermore, apply the same change to Vendor_ID. This had the same issue but it was less apparent because most devices provide Vendor_ID only in the root directory. And finally, also use this strategy for the remaining two IDs in the modalias, Specifier_ID and Version. It does not actually make sense to look for them elsewhere than in the unit directory because they are mandatory there. However, a uniform search order simplifies the implementation and has no adverse affect in practice. Side notes: - The older counterpart of this, nodemgr.c of ieee1394, looked for Vendor_ID first in the root directory, then in the unit directory, and for Model_ID only in the unit directory. - There is a single mainline driver which requires Vendor_ID and Model_ID --- the firedtv driver. This one worked because FireDTVs provide Vendor_ID in the root directory and Model_ID identically in root directory and unit directory. - Apart from firedtv, there are currently no drivers known to me (including userspace drivers) that look at the Vendor_ID or Model_ID of the modalias. Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-24PCI quirk: RS780/RS880: work around missing MSI initializationClemens Ladisch
AMD says in section 2.5.4 (GFX MSI Enable) of #43291 (AMD 780G Family Register Programming Requirements): The SBIOS must enable internal graphics MSI capability in GCCFG by setting the following: NBCFG.NB_CNTL.STRAP_MSI_ENABLE='1' Quite a few BIOS writers misinterpret this sentence and think that enabling MSI is an optional feature. However, clearing that bit just prevents delivery of MSI messages but does not remove the MSI PCI capabilities registers, and so leaves these devices unusable for any driver that attempts to use MSI. Setting that bit is not possible after the BIOS has locked down the configuration registers, so we have to manually disable MSI for the affected devices. This fixes the codec communication errors in the HDA driver when accessing the HDMI audio device, and allows us to get rid of the overcautious quirk in radeon_irq_kms.c. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Alex Deucher <alexdeucher@gamil.com> Cc: <stable@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is presentTim Yamin
Apply the CX700 quirk only when an external VT6212L is present (which is the case for the errant hardware the quirk was written for), don't touch the settings otherwise -- Hauppage PVR-500 tuners need PCI Bus Parking in order to work and when that's turned on everything seems to behave fine. I guess the underlying problem is a combination of an external VT6212L and the CX700 rather than the CX700's PCI being broken completely for all cases... Reported-by: Jeroen Roos <jeroen@roosnl.com> Signed-off-by: Tim Yamin <plasm@roo.me.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: complain about devices that seem to be brokenBjorn Helgaas
If we can tell that a device isn't working correctly, we should tell the user to make debugging easier. Otherwise, it can take a lot of work to determine whether the problem is in the driver, PCMCIA, PCI, hardware, etc., as in http://bugzilla.kernel.org/show_bug.cgi?id=12006 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: print resources consistently with %pRBjorn Helgaas
No functional change; just print resources in the conventional style. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: make disabled window printk style match the enabled onesBjorn Helgaas
No functional change; this just tweaks the changes from 349e1823a405 so the new printks for disabled PCI-to-PCI bridge windows match the ones for the enabled windows. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: break out primary/secondary/subordinate for readabilityBjorn Helgaas
No functional change; just add names for the primary/secondary/subordinate bus numbers read from config space rather than repeatedly masking/shifting. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: for address space collisions, show conflicting resourceBjorn Helgaas
With request_resource_conflict(), we can learn what the actual conflict is, so print that info for debugging purposes. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24i2c-scmi: Provide module aliases for automatic loadingDarrick J. Wong
Provide module aliases for automatic loading. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-24i2c-scmi: Support IBM SMBus CMI devicesCrane Cai
*) add a new HID for IBM SMBus CMI devices *) add methods for IBM SMBus CMI devices *) hook different HID with different control methods set *) minor tweaks as suggested by Jean Delvare Slightly modified by Darrick to use #define'd IBM SMBUS HID from Darrick's ACPI scan quirk patch. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-24acpi: Support IBM SMBus CMI devicesDarrick J. Wong
On some old IBM workstations and desktop computers, the BIOS presents in the DSDT an SMBus object that is missing the HID identifier that the i2c-scmi driver looks for. Modify the ACPI device scan code to insert the missing HID if it finds an IBM system with such an object. Affected machines: IntelliStation Z20/Z30. Note that the i2c-i801 driver no longer works on these machines because of ACPI resource conflicts. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-24[S390] fix broken proc interface for sclp_asyncHans-Joachim Picht
This patch now allows the use of the proc interface to either activate or deactivate call home on panic. e.g. echo 1 > /proc/sys/kernel/callhome strict_strtoul() requires _either_'\n\0' _or_ '\0' termination. This was missing and therefore the interface did not recognise valid input. Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24[S390] sclp: avoid 64 bit divisionHeiko Carstens
Avoid 64 bit division to fix this compile error on 32 bit: drivers/s390/char/sclp_cmd.c:711: undefined reference to `__udivdi3' Also move the whole arch_get_memory_phys_device function to the memory hotplug related functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24[S390] dasd: check tsb validityStefan Haberland
Check tsb validity before the tcw_get_tsb function is called. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24[S390] dasd: fix alignment of transport mode recovery TCWStefan Weinhuber
All TCWs need to be aligned on a 64 byte boundary or the I/O will be rejected. For recovery requests we create fresh TCWs, so we need to do the proper alignment here as well. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24[S390] zcore: CPU registers are not saved under LPARMichael Holzheu
To save the registers for all CPUs a sigp "store status" is done that stores the registers to address absolute zero. To access storage at absolute zero, normally the address of the prefix register of the accessing CPU has to be used. This does not work when large pages are active (currently only under LPAR). In order to fix that problem, instead of memcpy memcpy_real is used, which switches to real mode where prefixing works. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24pcmcia: use dev_pm_ops for class pcmcia_socket_classDominik Brodowski
Instead of requiring PCMCIA socket drivers to call various functions during their (bus) resume and suspend functions, register an own dev_pm_ops for this class. This fixes several suspend/resume bugs seen on db1xxx-ss, and probably on some other socket drivers, too. With regard to the asymmetry with only _noirq suspend, but split up resume, please see bug 14334 and commit 9905d1b411946fb3 . Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-24power: support _noirq actions on device types and classesDominik Brodowski
The new-style dev_pm_ops provide callbacks for both IRQs enabled and disabled. However, the _noirq variants were only called for buses registered with a device, not for classes and types. In order to properly use dev_pm_ops in class pcmcia_socket_class, support _noirq actions also on classes and types. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-03-24pcmcia: allow for four multifunction subdevices (again)Dominik Brodowski
Commit aa584ca4 broke what 6cf5be51 had already fixed: there may be four multifunction devices, but just two pseudo-multifunction devices per PCMCIA card. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23igb: only use vlan_gro_receive if vlans are registeredAlexander Duyck
This change makes it so that vlan_gro_receive is only used if vlans have been registered to the adapter structure. Previously we were just sending all vlan tagged frames in via this function but this results in a null pointer dereference when vlans are not registered. [ This fixes bugzilla entry 15582 -Eric Dumazet] Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23igb: do not modify tx_queue_len on link speed changeEmil Tantilov
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23igb: count Rx FIFO errors correctlyMitch Williams
Don't aggregate rx_no_buffer_count into rx_fifo_errors. RNBC counts packets that get queued temporarily in the adapter's FIFO. These packets are not dropped and are not errors. The correct counter is rx_missed_errors (MPC). Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23bnx2: Use proper handler during netpoll.Michael Chan
Netpoll needs to call the proper handler depending on the IRQ mode and the vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23bnx2: Fix netpoll crash.Benjamin Li
The bnx2 driver calls netif_napi_add() for all the NAPI structs during ->probe() time but not all of them will be used if we're not in MSI-X mode. This creates a problem for netpoll since it will poll all the NAPI structs in the dev_list whether or not they are scheduled, resulting in a crash when we access structure fields not initialized for that vector. We fix it by moving the netif_napi_add() call to ->open() after the number of IRQ vectors has been determined. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23ksz884x: fix return value of netdev_set_eepromJens Rottmann
ksz884x: fix return value of netdev_set_eeprom netdev_set_eeprom() confused ethtool by just returning 1 on error instead of a proper -EINVAL. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23drm/i915: Stop trying to use ACPI lid status to determine LVDS connection.Eric Anholt
I've been getting more and more quirk reports about this. It seems clear at this point that other OSes are not using this for determining whether the integrated panel should be turned on, and it is not reliable for doing so. Better to light up an unintended panel than to not light up the only usable output on the system. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-23pcmcia: do not use ioports < 0x100 on x86Dominik Brodowski
On x86 systems using ACPI _CRS information -- now the default for post-2008 systems -- the PCI root bus no longer pretends to be offering the root ioport_resource. To avoid accidentally hitting some platform / system device, use only I/O ports >= 0x100 for PCMCIA devices on x86. Reported-by: Komuro <komurojun-mbn@nifty.com> CC: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23pd6729: Coding Style fixesKomuro
Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23libata-sff: fix spurious IRQ handlingTejun Heo
Commit 27943620cbd960f710a385ff4a538e14ed3f1922 introduced spurious IRQ handling but it has a race condition where valid completion can be lost while trying to clear spurious IRQ leading to occassional command timeouts. This patch improves SFF interrupt handler such that 1. Once BMDMA HSM is stopped, the condition is never considered spurious. As there's no way to resume stopped BMDMA HSM, if device status doesn't agree with BMDMA status, the only way out is aborting the command (otherwise, it will just end up timing out). 2. ap->ops->sff_check_status() can be safely called to clear spurious device IRQ as it atomically returns completion status but BMDMA IRQ status can't be cleared in safe way if command is in flight. After a spurious IRQ, call ap->ops->sff_irq_clear() only if the respective device is idle and retry completion if sff_check_status() indicates command completion. Please note that ata_piix uses bmdma_status for sff_irq_check() and #2 won't weaken spurious IRQ handling even with in-flight command because if bmdma_status indicates IRQ pending but device status is not on spurious check, the next IRQ handler invocation will abort the command due to #1. This fixes bko#15537. https://bugzilla.kernel.org/show_bug.cgi?id=15537 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrew Benton <b3nton@gmail.com> Cc: Petr Uzel <petr.uzel@centrum.cz> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-23SH: remove superfluous warning from the serial driverGuennadi Liakhovetski
This warning has been introduced during the SCI DMA support developmenr and is not needed any more. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23SH: fix SCIFA SCASCR register bit definitionsGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23serial: sh-sci: fix SH-Mobile SH breakageMagnus Damm
The follwing commit breaks SH-Mobile on non-ARM platforms: "8a77b8d serial: sh-sci: Support ARM-based SH-Mobile CPUs." The commit assumed that CONFIG_ARCH_SHMOBILE only was set on ARM platforms, but it turns out that this kconfig is also set by all SH-based SoCs. Sh7724 and other older SH-Mobile SoCs are all broken without this fix. This patch converts the "defined(CONFIG_ARCH_SHMOBILE)" into one "defined()" per SoC model - similar to existing SH code. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-22netxen: The driver doesn't work on NX_P3_B1 so cause probe to fail.Eric W. Biederman
I haven't been able to get link up on a NX_P3_B1 since 2.6.31. The driver complains about a firmware hang instead. When I asked I was told rev 0x41 was a preproduction rev. So disable support in the driver so no one is surprised the code doesn't work. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22can: bfin_can: switch to common Blackfin can headerMike Frysinger
The MMR bits are being moved to this header, so include it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22pata_via: Add VIA VX900 supportJosephChan@via.com.tw
Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-22regulator: fix dangling pointersWolfram Sang
Fix I2C-drivers which missed setting clientdata to NULL before freeing the structure it points to. Also fix drivers which do this _after_ the structure was freed already. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>