aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-31md/raid6: move raid6 data processing to raid6_pq.koDan Williams
Move the raid6 data processing routines into a standalone module (raid6_pq) to prepare them to be called from async_tx wrappers and other non-md drivers/modules. This precludes a circular dependency of raid456 needing the async modules for data processing while those modules in turn depend on raid456 for the base level synchronous raid6 routines. To support this move: 1/ The exportable definitions in raid6.h move to include/linux/raid/pq.h 2/ The raid6_call, recovery calls, and table symbols are exported 3/ Extra #ifdef __KERNEL__ statements to enable the userspace raid6test to compile Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: raid5 run(): Fix max_degraded for raid level 4.Andre Noll
raid4 allows only one failed disk. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: 'array_size' sysfs attributeDan Williams
Allow userspace to set the size of the array according to the following semantics: 1/ size must be <= to the size returned by mddev->pers->size(mddev, 0, 0) a) If size is set before the array is running, do_md_run will fail if size is greater than the default size b) A reshape attempt that reduces the default size to less than the set array size should be blocked 2/ once userspace sets the size the kernel will not change it 3/ writing 'default' to this attribute returns control of the size to the kernel and reverts to the size reported by the personality Also, convert locations that need to know the default size from directly reading ->array_sectors to <pers>_size. Resync/reshape operations always follow the default size. Finally, fixup other locations that read a number of 1k-blocks from userspace to use strict_blocks_to_sectors() which checks for unsigned long long to sector_t overflow and blocks to sectors overflow. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31md: centralize ->array_sectors modificationsDan Williams
Get personalities out of the business of directly modifying ->array_sectors. Lays groundwork to introduce policy on when ->array_sectors can be modified. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31md: add 'size' as a personality methodDan Williams
In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31md: fix typo in FSF addressAtsushi SAKAI
Hello, I found a typo Bosto"m" in FSF address. And I am checking around linux source code. Here is the only place which uses Bosto"m" (not Boston). Signed-off-by: Atsushi SAKAI <sakaia@jp.fujitsu.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: add takeover support for converting raid6 back into raid5NeilBrown
If a raid6 is still in the layout that comes from converting raid5 into a raid6. this will allow us to convert it back again. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: add takeover support for raid4 -> raid5 conversion.NeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: allow layout/chunksize to be changed on an active 2-drive raid5.NeilBrown
2-drive raid5's aren't very interesting. But if you are converting a raid1 into a raid5, you will at least temporarily have one. And that it a good time to set the layout/chunksize for the new RAID5 if you aren't happy with the defaults. layout and chunksize don't actually affect the placement of data on a 2-drive raid5, so we just do some internal book-keeping. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: add ->takeover method for raid5 to be able to take over raid1NeilBrown
The RAID1 must have two drives and be a suitable size to be a multiple of a chunksize that isn't too small. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: add ->takeover method to support changing the personality managing an arrayNeilBrown
Implement this for RAID6 to be able to 'takeover' a RAID5 array. The new RAID6 will use a layout which places Q on the last device, and that device will be missing. If there are any available spares, one will immediately have Q recovered onto it. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: enable suspend/resume of md devices.NeilBrown
To be able to change the 'level' of an md/raid array, we need to suspend the device so that no requests are active - then move some pointers around etc. The code already keeps counts of active requests and the ->quiesce function can be used to wait until those counts hit zero. However the quiesce function blocks new requests once they are all ready 'inside' the personality module, and that is too late if we want to replace the personality modules. So make all md requests come in through a common md_make_request function that keeps track of how many requests have entered the modules but may not yet be on the internal reference counts. Allow md_make_request to be blocked when we want to suspend the device, and make it possible to wait for all those in-transit requests to be added to internal lists so that ->quiesce can wait for them. There is still a problem that when a request completes, we drop the ref count inside the personality code so there is a short time between when the refcount hits zero, and when the personality code is no longer being used. The personality code never blocks (schedule or spinlock) between dropping the refcount and exiting the routine, so this should be safe (as put_module calls synchronize_sched() before unmapping the module code). Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: md_unregister_thread should cope with being passed NULLNeilBrown
Mostly md_unregister_thread is only called when we know that the thread is NULL, but sometimes we need to check first. It is safer to put the check inside md_unregister_thread itself. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: refactor raid5 "run"NeilBrown
.. so that the code to create the private data structures is separate. This will help with future code to change the level of an active array. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: make sure new_level, new_chunksize, new_layout always have sensible values.NeilBrown
When an md array is undergoing a change, we have new_* fields that show the new values. When no change is happening, it is least confusing if these have the same value as the normal fields. This is true in most cases, but not when the values are set via sysfs. So fix this up. A subsequent patch will BUG_ON if these things aren't consistent. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: finish support for DDF/raid6NeilBrown
DDF requires RAID6 calculations over different devices in a different order. For md/raid6, we calculate over just the data devices, starting immediately after the 'Q' block. For ddf/raid6 we calculate over all devices, using zeros in place of the P and Q blocks. This requires unfortunately complex loops... Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: Add support for new layouts for raid5 and raid6.NeilBrown
DDF uses different layouts for P and Q blocks than current md/raid6 so add those that are missing. Also add support for RAID6 layouts that are identical to various raid5 layouts with the simple addition of one device to hold all of the 'Q' blocks. Finally add 'raid5' layouts to match raid4. These last to will allow online level conversion. Note that this does not provide correct support for DDF/raid6 yet as the order in which data blocks are summed to produce the Q block is significant and different between current md code and DDF requirements. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: simplify raid5_compute_sector interfaceNeilBrown
Rather than passing 'pd_idx' and 'qd_idx' to be filled in, pass a 'struct stripe_head *' and fill in the relevant fields. This is more extensible. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid6: remove expectation that Q device is immediately after P device.NeilBrown
Code currently assumes that the devices in a raid6 stripe are 0 1 ... N-1 P Q in some rotated order. We will shortly add new layouts in which this strict pattern is broken. So remove this expectation. We still assume that the data disks are roughly in-order. However P and Q can be inserted anywhere within that order. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: change raid5_compute_sector and stripe_to_pdidx to take a ↵NeilBrown
'previous' argument This similar to the recent change to get_active_stripe. There is no functional change, just come rearrangement to make future patches cleaner. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md/raid5: simplify interface for init_stripe and get_active_stripeNeilBrown
Rather than passing 'pd_idx' and 'disks' to these functions, just pass 'previous' which tells whether to use the 'previous' or 'current' geometry during a reshape, and let init_stripe calculate disks and pd_idx and anything else it might need. This is not a substantial simplification and even adds a division. However we will shortly be adding more complexity to init_stripe to handle more interesting 'reshape' activities, and without this change, the interface to these functions would get very complex. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: Represent raid device size in sectors.Andre Noll
This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: Make mddev->size sector-based.Andre Noll
This patch renames the "size" field of struct mddev_s to "dev_sectors" and stores the number of 512-byte sectors instead of the number of 1K-blocks in it. All users of that field, including raid levels 1,4-6,10, are adjusted accordingly. This simplifies the code a bit because it allows to get rid of a couple of divisions/multiplications by two. In order to make checkpatch happy, some minor coding style issues have also been addressed. In particular, size_store() now uses strict_strtoull() instead of simple_strtoull(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: be more consistent about setting WriteMostly flag when adding a drive to ↵NeilBrown
an array When a drive is added to an array using ADD_NEW_DISK, there are two places we can get certain flags from: the metadata on the disk or the flags passed through the IOCTL. For the WriteMostly flag (aka MD_DISK_WRITEMOSTLY) we take the value from either of those sources depending on if it is set (i.e. we effectively 'or' the two sources together). This makes it awkward to clear, and is at best inconsistent. As documented code (in mdadm) requires that setting MD_DISK_WRITEMOSTLY in the ioctl will be effective, we resolve the inconsistency by always using the value for this flag from the ioctl, and ignoring the value on disk. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: occasionally checkpoint drive recovery to reduce duplicate effort after ↵NeilBrown
a crash Version 1.x metadata has the ability to record the status of a partially completed drive recovery. However we only update that record on a clean shutdown. It would be nice to update it on unclean shutdowns too, particularly when using a bitmap that removes much to the 'sync' effort after an unclean shutdown. One complication with checkpointing recovery is that we only know where we are up to in terms of IO requests started, not which ones have completed. And we need to know what has completed to record how much is recovered. So occasionally pause the recovery until all submitted requests are completed, then update the record of where we are up to. When we have a bitmap, we already do that pause occasionally to keep the bitmap up-to-date. So enhance that code to record the recovery offset and schedule a superblock update. And when there is no bitmap, just pause 16 times during the resync to do a checkpoint. '16' is a fairly arbitrary number. But we don't really have any good way to judge how often is acceptable, and it seems like a reasonable number for now. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: move md_k.h from include/linux/raid/ to drivers/md/NeilBrown
It really is nicer to keep related code together.. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: move lots of #include lines out of .h files and into .cNeilBrown
This makes the includes more explicit, and is preparation for moving md_k.h to drivers/md/md.h Remove include/raid/md.h as its only remaining use was to #include other files. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: move LEVEL_* definition from md_k.h to md_u.hNeilBrown
.. as they are part of the user-space interface. Also move MdpMinorShift into there so we can remove duplication. Lastly move mdp_major in. It is less obviously part of the user-space interface, but do_mounts_md.c uses it, and it is acting a bit like user-space. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: move headers out of include/linux/raid/Christoph Hellwig
Move the headers with the local structures for the disciplines and bitmap.h into drivers/md/ so that they are more easily grepable for hacking and not far away. md.h is left where it is for now as there are some uses from the outside. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31cleanup drivers/md/MakefileChristoph Hellwig
Use the -y variables instead of the old -objs so we can easily add conditional objects to the modules. Also always use += to add subobjects to avoid problems when placing additional objects in some place in the file. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: stop defining MAJOR_NRChristoph Hellwig
MAJOR_NR was only required for magic in linux/blk.h in 2.4 or earlier kernels, so no need to keep it around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31MD data integrity supportMartin K. Petersen
md: Add support for data integrity to MD If all subdevices support the same protection format the MD device is flagged as integrity capable. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: write bitmap information to devices that are undergoing recovery.NeilBrown
When we add some spares to an array and start recovery, and we have a bitmap which is stored 'internally' on all devices, we call bitmap_write_all to make sure the bitmap is correct on the new device(s). However that doesn't work as write_sb_page only writes to 'In_sync' devices, and devices undergoing recovery are not 'In_sync' until recovery finishes. So extend write_sb_page (actually next_active_rdev) to include devices that are under recovery. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: never clear bit from the write-intent bitmap when the array is degraded.NeilBrown
It is safe to clear a bit from the write-intent bitmap for a raid1 if we know the data has been written to all devices, which is what the current test does. But it is not always safe to update the 'events_cleared' counter in that case. This is because one request could complete successfully after some other request has partially failed. So simply disable the clearing and updating of events_cleared whenever the array is degraded. This might end up not clearing some bits that could safely be cleared, but it is safest approach. Note that the bug fixed here did not risk corrupting data by letting the array get out-of-sync. Rather it meant that when a device is removed and re-added to the array, it might incorrectly require a full recovery rather than just recovering based on the bitmap. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31md: Allow write-intent bitmaps to have chunksize < PAGE_SIZENeilBrown
md currently insists that the chunk size used for write-intent bitmaps (the amount of data that corresponds to one chunk) be at least one page. The reason for this restriction is lost in the mists of time, but a review of the code (and a vague memory) suggests that the only problem would be related to resync. Resync tries very hard to work in multiples of a page, but also needs to sync with units of a bitmap_chunk too. This connection comes out in the bitmap_start_sync call. So change bitmap_start_sync to always work in multiples of a page. If the bitmap chunk size is less that one page, we flag multiple chunks as 'syncing' and generally make them all appear to the resync routines like one chunk. All other code either already works with data ranges that could span multiple chunks, or explicitly only cares about a single chunk. Signed-off-by: Neil Brown <neilb@suse.de>
2009-03-31md: Fix is_mddev_idle test (again).NeilBrown
There are two problems with is_mddev_idle. 1/ sync_io is 'atomic_t' and hence 'int'. curr_events and all the rest are 'long'. So if sync_io were to wrap on a 64bit host, the value of curr_events would go very negative suddenly, and take a very long time to return to positive. So do all calculations as 'int'. That gives us plenty of precision for what we need. 2/ To initialise rdev->last_events we simply call is_mddev_idle, on the assumption that it will make sure that last_events is in a suitable range. It used to do this, but now it does not. So now we need to be more explicit about initialisation. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-09Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
2009-03-09Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."Dave Jones
This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones <davej@redhat.com>
2009-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
2009-03-09lguest: fix for CONFIG_SPARSE_IRQ=yRusty Russell
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y We now need to call irq_to_desc_alloc_cpu() before set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no kmalloc available). So do it as we use interrupts instead. Also means we only alloc for irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
2009-03-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: fix data timeout for SEND_EXT_CSD
2009-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: 'ORION5X_TCLK' undeclared [WATCHDOG] gef_wdt.c: fsl_get_sys_freq() failure not noticed [WATCHDOG] ks8695_wdt.c: 'CLOCK_TICK_RATE' undeclared [WATCHDOG] rc32434_wdt: fix sections [WATCHDOG] rc32434_wdt: fix watchdog driver
2009-03-08Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmatest: fix use after free in dmatest_exit ipu_idmac: fix spinlock type iop-adma, mv_xor: fix mem leak on self-test setup failure fsldma: fix off by one in dma_halt I/OAT: fail self-test if callback test reaches timeout I/OAT: update driver version and copyright dates I/OAT: list usage cleanup I/OAT: set tcp_dma_copybreak to 256k for I/OAT ver.3 I/OAT: cancel watchdog before dma remove I/OAT: fail initialization on zero channels detection I/OAT: do not set DCACTRL_CMPL_WRITE_ENABLE for I/OAT ver.3 I/OAT: add verification for proper APICID_TAG_MAP setting by BIOS dmaengine: update kerneldoc
2009-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ata: add CFA specific identify data words remove stale comment from <linux/hdreg.h> AT91: initialize Compact Flash on AT91SAM9263 cpu ide: add at91_ide driver ide: allow to wrap interrupt handler ide-iops: fix odd-length ATAPI PIO transfers ide: NULL noise: drivers/ide/ide-*.c ide: expiry() returns int, negative expiry() return values won't be noticed
2009-03-08Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Don't trust current capacity values in identify words 57-58 libata: make sure port is thawed when skipping resets sata_nv: fix module parameter description ahci: Add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c libata: don't use on-stack sense buffer libata: align ap->sector_buf libata: fix dma_unmap_sg misuse libata: change drive ready wait after hard reset to 5s
2009-03-08mmc: fix data timeout for SEND_EXT_CSDAdrian Hunter
Commit 0d3e0460f307e84904968aad6cff97bd688583d8 "MMC: CSD and CID timeout values" inadvertently broke the timeout for the MMC command SEND_EXT_CSD. This patch puts it back again. Depending on the characteristics of the controller, this bug may prevent the use of MMC cards. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-06p54: fix race condition in memory managementChristian Lamparter
This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05[WATCHDOG] orion5x_wdt.c: 'ORION5X_TCLK' undeclaredWim Van Sebroeck
orion5x_wdt no longer compiled after the changes in commit ebe35aff883496c07248df82c8576c3b6e84bbbe ("Orion: prepare for runtime-determined timer tick rate"). The tick rate define (ORION5X_TCLK) was removed in favor of a runtime detection. The quick fix is to add the define in the watchdog driver. The fix is not correct for all supported orion5x platforms, but since the supported platforms right now are 133 Mhz and 166 Mhz, it won't be _that_ far off. ;-) A fix that uses the runtime-determined timer tick rate will be applied later. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Kristof Provost <kristof@sigsegv.be> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org>
2009-03-05iwlwifi: fix error flow in iwl*_pci_probeReinette Chatre
Both the agn and 3945 drivers has some problems with dealing with errors in their probe functions. Ensure that a goto will undo only things that was done before the goto was called. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05rt2x00 : more devices to rt73usb.cXose Vazquez Perez
add more usb_dev to rt73usb.c . IDs 'stolen' from the windows inf file(10/21/2008, 1.03.02.0000) plus some from the Ralink linux driver(2009_0206_RT73_Linux_STA_Drv1.1.0.2.tar.bz2) Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>