aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-13[PATCH] bonding: expose some structsMitch Williams
The sysfs code needs to know what these structs look like, so make them not static, and move the definition to the header. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: explicitly clear RLB flag during ALB initMitch Williams
Explicitly clear RLB flag during ALB init. This is needed for sysfs support, since the bond mode can be changed at runtime via sysfs. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: move kmalloc out of spinlock in ALB initMitch Williams
Move memory allocations out of the spinlock during ALB init. This gets rid of a sleeping-inside-spinlock warning and accompanying stack dump. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: get slave name from actual slave instead of param listMitch Williams
Take the primary slave name shown in /proc from the actual slave dev instead of from the command-line parameter, which won't be present if the bond is created via sysfs. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: Add transmit policy to /procMitch Williams
Adds information about the recently-added transmit policy setting to each bond's /proc file. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: expand module param descriptionsMitch Williams
Expand and correct the parameter descriptions shown by modinfo. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-13[PATCH] bonding: add bond name to all error messagesMitch Williams
Add the bond name to all error messages so we can tell which one is complaining. Also reformats some error messages to be more consistent. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2005-11-11[PATCH] kill libata scsi_wait_req usage (make libata compile with scsi-misc ↵Mike Christie
changes) scsi_wait_req does not exist any more in the SCSI layer. This patch makes it so libata can compile again. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-11-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-11-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-11-11Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
2005-11-11[PATCH] ipmi: fix inconsistent spinlock usageHironobu Ishii
Part of a patch was accidentally reverted, this corrects an inconsistent spinlock use in the IPMI message handler. Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
2005-11-11[PATCH] Input: convert hdaps to dynamic input_dev allocation.Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11[PATCH] gt96100eth.c: Don't concatenate __FUNCTION__ with strings.Ralf Baechle
As part of the ISO C9x conversion gcc deprecates concatenation with __FUNCTION__ because __FUNCTION__ is not a preprocessor macro. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] smc91x: DB1200 support.Pete Popov
The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] SAA9730: Driver overhaulRalf Baechle
o Try to work around some of the undocumented "features" of the SAA9730 o Use netdev_priv() instead of the previous broken mechanism to allocate the private data structure. o Try to make sure we don't leak resources on exit. o No more need to call SET_MODULE_OWNER in 2.6. o Use pci_free_consistent instead of homegrown architecture-specific allocation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 531 +++++++++++++++++++++++--------------------------- 1 files changed, 249 insertions(+), 282 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] SAA9730: Whitespace cleanup.Ralf Baechle
Kill trailing whitespace, replace leading whitespace with tabs. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 98 +++++++++++++++++++++++++------------------------- 1 files changed, 49 insertions(+), 49 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[netdrvr forcedeth] phy address scan rangeAyaz Abdulla
Added phy address 0 to the phy scan. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
2005-11-11[netdrvr forcedeth] support for irq mitigationAyaz Abdulla
This patch contains support for different modes of interrupt mitigation of forcedeth. It includes changes based on Jeff's comments. Currently, the modes are changed through module parameters since ethtool does not support something similar. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
2005-11-11[netdrvr forcedeth] remove superfluous rx engine stop/startAyaz Abdulla
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
2005-11-11[PATCH] gianfar mii needs to zero out the mii_bus structureKumar Gala
To ensure that phy_mask and any future elements of the mii_bus structure are initialized use kzalloc() instead of kmalloc(). This fixes an issue in which phy_mask was not being initialized and we would skip random phy addresses when scanning. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: mail address changedFrank Pavlic
[patch 7/7] s390: mail address changed From: Frank Pavlic <fpavlic@de.ibm.com> - mail address changed to fpavlic@de.ibm.com Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: lcs.c | 4 ++-- qeth_main.c | 4 ++-- qeth_mpc.c | 2 +- qeth_mpc.h | 2 +- qeth_sys.c | 2 +- qeth_tso.h | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: introduce guestLan sniffer support in qethFrank Pavlic
[patch 6/7] s390: introduce guestLan sniffer support in qeth From: Peter Tiedemann <ptiedem@de.ibm.com> - introduce guestLan sniffer support in qeth feature allows a linux in a virtual machine guest to become a network LAN sniffer, monitoring and recording the networking traffic within an entire guestLan. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 2 + qeth_main.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qeth_mpc.h | 11 ++++--- 3 files changed, 102 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: fix recovery failure of non-guestLAN devicesFrank Pavlic
[patch 5/7] s390: fix recovery failure of non-guestLAN devices From: Frank Pavlic <fpavlic@de.ibm.com> - Recovery of non-guestLAN Layer 2 device failed due to trying to register the real MAC address we got from the READ_MAC adapter parameters command. We have to keep the "old" MAC address when we process the reply of a READ_MAC. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 12 ++++++------ qeth_main.c | 27 ++++++++++++++++----------- 2 files changed, 22 insertions(+), 17 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: some more qeth fixesFrank Pavlic
[patch 4/7] s390: some more qeth fixes From: Frank Pavlic <fpavlic@de.ibm.com> From: Peter Tiedemann <ptiedem@de.ibm.com> - possible race on list fixed by reset list processing after every operation - traffic hang fixed Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: qeth multicast address registration fixedFrank Pavlic
[patch 3/7] s390: qeth multicast address registration fixed From: Klaus Dieter Wacker <kdwacker@de.ibm.com> - when running in Layer2 mode we don't have to register the multicast IP address but only group mac address. Therefore for Layer 2 devices it is enough to go through dev->mc_list list and register these entries. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 106 +++++++++++++++++++++++++++++++++++++++++++++--------------- 1 files changed, 80 insertions(+), 26 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: minor modification in qeth layer2 codeFrank Pavlic
[patch 2/7] s390: minor modification in qeth layer2 code From: Frank Pavlic <fpavlic@de.ibm.com> - use qeth_layer2_send_setdelvlan_cb to check return code of a SET/DELVLAN IP Assist command. It fits better in qeth's design and mechanism of IP Assist command handling. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 40 ++++++++++++++++++++++++++-------------- 1 files changed, 26 insertions(+), 14 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: synthax checking for VIPA addresses fixedFrank Pavlic
[patch 1/7] s390: synthax checking for VIPA addresses fixed From: Peter Tiedemann <ptiedem@de.ibm.com> - synthax checking for VIPA addresses fixed Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 65 ++++++++++++++++++++++++++++++++++++++++++++++++------------- qeth_sys.c | 6 ++--- 2 files changed, 55 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] libata: propogate host private data from probe functionAlan Cox
This will let me chop the code size of several drivers right down. In many cases the actual private data is very useful and constant for a given host controller so being able to just pass it at probe time would be very useful indeed (eg with the via driver would could pass the udma clocking and reduce the code size, or with the AMD one the UDMA multiplier and the offset) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11Merge branch 'atmel'Jeff Garzik
2005-11-11[PATCH] Atmel wireless updatesimon@thekelleys.org.uk
* Merge PCMCIA card table with new Brodowski PCMCIA id table. * Add missing entries to PCMCIA id table. * Other tweaks to conform with Documentation/driver-changes.txt (types, call request_region, etc) * Fix size of requested IO region. * Reduce printk verbosity. * Remove EXPERIMENTAL * tweak to association code - don't force shared key authentication when wep in use. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[libata sata_mv] add Adaptec 1420SA PCI IDJeff Garzik
Contributed by Jeroen <dekien@pandora.be>
2005-11-11Merge branch 'master'Jeff Garzik
2005-11-11[PATCH] disable DEBUG in ibmvethAnton Blanchard
At the moment ibmveth has DEBUG enabled which is rather verbose. Disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-10[PATCH] lpfc build fixJeff Garzik
Current upstream 'allmodconfig' build is broken. This is the obvious patch... Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[SPARC]: display7seg build fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[PATCH] PCI: fix namespace clashesRajesh Shah
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: Change MSI to use physical delivery mode alwaysAshok Raj
MSI hardcoded delivery mode to use logical delivery mode. Recently x86_64 moved to use physical mode addressing to support physflat mode. With this mode enabled noticed that my eth with MSI werent working. msi_address_init() was hardcoded to use logical mode for i386 and x86_64. So when we switch to use physical mode, things stopped working. Since anyway we dont use lowest priority delivery with MSI, its always directed to just a single CPU. Its safe and simpler to use physical mode always, even when we use logical delivery mode for IPI's or other ioapic RTE's. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: drivers/pci/: small cleanupsAdrian Bunk
This patch contains the following cleanups: - access.c should #include "pci.h" for getting the prototypes of it's global functions - hotplug/shpchp_pci.c: make the needlessly global function program_fw_provided_values() static Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] dlpar regression for ppc64 - probe changeJohn Rose
This patch contains the driver bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe. This functionality was regressed when the new PCI approach was introduced. Please apply if appropriate. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: removed unneeded .owner field from struct pci_driverGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: automatically set device_driver.ownerLaurent riffard
A nice feature of sysfs is that it can create the symlink from the driver to the module that is contained in it. It requires that the device_driver.owner is set, what is not the case for many PCI drivers. This patch allows pci_register_driver to set automatically the device_driver.owner for any PCI driver. Credits to Al Viro who suggested the method. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> -- drivers/ide/setup-pci.c | 12 +++++++----- drivers/pci/pci-driver.c | 9 +++++---- include/linux/ide.h | 3 ++- include/linux/pci.h | 10 ++++++++-- 4 files changed, 22 insertions(+), 12 deletions(-)
2005-11-10[PATCH] pci-driver: store_new_id() not inlineRandy Dunlap
store_new_id() should not be (and cannot be) inline; the function pointer is stored in a device_attribute table. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: NCR 53c810 quirkIvan Kokshaysky
Move the PPC fixup for old NCR 810 controllers to generic quirks - it's needed for Alpha, x86 and other architectures that use setup-bus.c. Thanks to Jay Estabrook for pointing out the issue. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: Fix VIA 686 PCI quirk namesMeelis Roos
The quirk names for VIA 686 are mistyped in 2.6.14 (686 vs 868). S3 868 influence? :) Here is a patch to correct them. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: fix handling of power faults during hotplugrajesh.shah@intel.com
The current pciehp implementation reports a power-fail error even if the condition has cleared by the time the corresponding interrupt handling code gets a chance to run. This patch fixes this problem. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: clean-up how we request control of hotplug hardwarerajesh.shah@intel.com
This patch further tweaks how we request control of hotplug controller hardware from BIOS. We first search the ACPI namespace corresponding to a specific hotplug controller looking for an _OSC or OSHP method. On failure, we successively move to the ACPI parent object, till we hit the highest level host bridge in the hierarchy. This allows for different types of BIOS's which place the _OSC/OSHP methods at various places in the acpi namespace, while still not encroaching on the namespace of some other root level host bridge. This patch also introduces a new load time option (pciehp_force) that allows us to bypass all _OSC/OSHP checking. Not supporting these methods seems to be be the most common ACPI firmware problem we've run into. This will still _not_ allow the pciehp driver to work correctly if the BIOS really doesn't support pciehp (i.e. if it doesn't generate a hotplug interrupt). Use this option with caution. Some BIOS's may deliberately not build any _OSC/OSHP methods to make sure it retains control the hotplug hardware. Using the pciehp_force parameter for such systems can lead to two separate entities trying to control the same hardware. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 10:28:10 +0000