aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-05-06sata_mv NCQ and SError fixes for mv_err_intrMark Lord
Sigh. Undo some earlier changes to mv_port_intr(), so that we now read/clear SError again in all cases. Arrange the top of the function to be as close as possible to what we need for a later update (in this series) for ERR_DEV handling. Fix things so that libata-eh can attempt a READ_LOG_EXT_10H in response to a failed NCQ command, by just doing a local mv_eh_freeze() rather than ata_port_freeze(). This will now fully handle NCQ errors much of the time, but more fixes are needed for FBS/PMP, and for certain chip errata. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06sata_mv rearrange mv_config_fbsMark Lord
Rearrange mv_config_fbs() to more closely follow the (corrected) datasheet recommendations for NCQ and FIS-based switching (FBS). Also, maintain a port flag to let us know when FBS is enabled. We will make more use of that flag later in this patch series. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06sata_mv errata workaround for sata25 part 1Mark Lord
Part 1 of workaround for errata "sata#25" for the 60x1 series (the second half of this errata workaround is still in development. Bit22 of the GPIO port has to be set "on" when in NCQ mode. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06sata_mv new mv_qc_defer methodMark Lord
The EDMA engine cannot tolerate a mix of NCQ/non-NCQ commands, and cannot be used for PIO at all. So we need to prevent libata from trying to feed us such mixtures. Introduce mv_qc_defer() for this purpose, and use it for all chip versions. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06sata_mv wait for empty+idleMark Lord
When performing EH, it is recommended to wait for the EDMA engine to empty out requests-in-progress before disabling EDMA. Introduce code to poll the EDMA_STATUS register for idle/empty bits before disabling EDMA. For non-EH operation, this will normally exit without delay, other than the register read. A later series of patches may focus on eliminating this and various other register reads (when possible) throughout the driver, but for now we're focussing on solid reliablity. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06sata_mv pci featuresMark Lord
Some of the GenIIe EDMA optimizations should not be used for non-PCI (SOC) devices, and nor for certain configurations of conventional PCI (non PCI-X, PCIe) buses. Logic taken/simplified from that in the Marvell proprietary driver. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06sata_mv more cosmetic changesMark Lord
More cosmetic changes; no code changes. -- try and improve consistency of naming. -- add missing _OFS to tails of register offset definitions. -- rename mv_setup_ifctl() to mv_setup_ifcfg(), since that's what it really does. -- remove/move some dead comments Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06libata: Add Intel SCH PATA driverAlek Du
This patch adds Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L) PATA controller support. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06ata_piix: verify SIDPR access before enabling itTejun Heo
On certain configurations (certain macbooks), even though all the conditions for SIDPR access described in the datasheet are met, actually reading those registers just returns 0 and have no effect on write. Verify SIDPR is actually working before enabling it. This is reported by Ryan Roth in bz#10512. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ryan Roth <ryan.roth@ch2m.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06libata: improve post-reset device ready testTejun Heo
Some controllers (jmb and inic162x) use 0x77 and 0x7f to indicate that the device isn't ready yet. It looks like they use 0xff if device presence is detected but connection isn't established. 0x77 or 0x7f after connection is established and use the value from signature FIS after receiving it. This patch implements ata_check_ready(), which takes TF status value and determines whether the port is ready or not considering the above and other conditions, and use it in @check_ready() functions. This is safe as both 0x77 and 0x7f aren't valid ready status value even though they have BSY bit cleared. This fixes hot plug detection failures which can be triggered with certain drives if they aren't already spun up when the data connector is hot plugged. Tested on sil, sil24, ahci (jmb/ich), piix and inic162x combined with eight drives from all major vendors. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net_cls_act: act_simple dont ignore realloc code iwlwifi: make IWLWIFI a tristate Revert "atm: Do not free already unregistered net device." dccp: return -EINVAL on invalid feature length irda: fix !PNP support for drivers/net/irda/smsc-ircc2.c irda: fix !PNP support in drivers/net/irda/nsc-ircc.c net_cls_act: Make act_simple use of netlink policy. ip: Use inline function dst_metric() instead of direct access to dst->metric[] ip: Make use of the inline function dst_metric_locked() atm: Bad locking on br2684_devs modifications. atm: Do not free already unregistered net device. mac80211: Do not free net device after it is unregistered. bridge: Consolidate error paths in br_add_bridge(). bridge: Net device leak in br_add_bridge(). niu: Fix probing regression for maramba on-board chips. lapbeth: Release ->ethdev when unregistering device. xfrm: convert empty xfrm_audit_* macros to functions net: Fix useless comment reference loop. sch_htb: remove from event queue in htb_parent_to_leaf()
2008-05-06iwlwifi: make IWLWIFI a tristateAdrian Bunk
IWLWIFI should be a tristate so that if IWLCORE and/or IWL3945 are m and none of them is y kbuild doesn't create an empty drivers/net/wireless/built-in.o This patch also removes the pointless "default n". Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Support creation of FMRs with pages smaller than 4K IB/ehca: Fix function return types RDMA/cxgb3: Bump up the MPA connection setup timeout. RDMA/cxgb3: Silently ignore close reply after abort. RDMA/cxgb3: QP flush fixes IB/ipoib: Fix transmit queue stalling forever IB/mlx4: Fix off-by-one errors in calls to mlx4_ib_free_cq_buf()
2008-05-05mlx4_core: Support creation of FMRs with pages smaller than 4KOren Duer
Don't hard code a test against a minimum page shift of 12, since the device may support smaller pages. Test against the actual smallest page size from the device capabilities. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-05IB/ehca: Fix function return typesStefan Roscher
Also remove duplicate assignment of local_ca_ack_delay and change min_t check for local_ca_ack_delay to u8 instead of int. Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-05Merge branch 'powerpc-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'powerpc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Assign PDE->data before gluing PDE into /proc tree [POWERPC] devres: Add devm_ioremap_prot() [POWERPC] macintosh: ADB driver: adb_handler_sem semaphore to mutex [POWERPC] macintosh: windfarm_smu_sat: semaphore to mutex [POWERPC] macintosh: therm_pm72: driver_lock semaphore to mutex
2008-05-05dev_name introduction fall out fixStephen Rothwell
Commit 06916639e2fed9ee475efef2747a1b7429f8fe76 ("driver-core: add dev_name() to help transition away from using bus_id") added a static inline dev_name() and used it in dev_printk. Unfortunately, drivers/edac/edac_core.h defines a macro called dev_name(). Rename the latter. Diagnosis by Tony Breeds and Michael Ellerman. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86 PCI: call dmi_check_pciprobe() x86/pci: add pci=skip_isa_align command lines. x86/pci: remove flag in pci_cfg_space_size_ext x86: fix section mismatch in pci_scan_bus
2008-05-05CONFIG_SCSI_MAC_ESP needs CONFIG_SCSI_SPI_ATTRSGeert Uytterhoeven
The new mac_esp scsi driver needs CONFIG_SCSI_SPI_ATTRS, just like all other drivers using the new esp_scsi core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05m68k: drivers/input/serio/hp_sdc.c needs <linux/semaphore.h>Geert Uytterhoeven
drivers/input/serio/hp_sdc.c: In function 'hp_sdc_take': drivers/input/serio/hp_sdc.c:198: error: implicit declaration of function 'up' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05m68k: serial167 missing return value in cy_put_char()Geert Uytterhoeven
commit a5b08c66194fba02a865b397579b7204688bcb1e Author: Alan Cox <alan@lxorguk.ukuu.org.uk> Date: Wed Apr 30 00:54:05 2008 -0700 serial167: switch to int put_char method missed one case when adding return values. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05m68k: Fix falconide `data_adr' typoGeert Uytterhoeven
commit 9567b349f7e7dd7e2483db99ee8e4a6fe0caca38 Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Mon Apr 28 23:44:36 2008 +0200 ide: merge ->atapi_*put_bytes and ->ata_*put_data methods introduced a typo (`data_adr' instead of `data_addr'), leading to a compile failure. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05kgdb: 1000 loops for the single step test in kgdbtsJason Wessel
The single step test is not terribly costly and it should be able to pass at 1000 loops successfully in under 1 second. A non-kgdb timing regression was found using this test, but it did not occur frequently because by default the test was only executed a single time. This patch changes the default for the single step test to 1000 iterations and allows for individual configuration of the single step test to further exercise the kgdb subsystem when needed. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-05-05kgdb: trivial sparse fixes in kgdb test-suiteHarvey Harrison
Shadowed variable and integer as NULL pointer fixes: drivers/misc/kgdbts.c:877:6: warning: symbol 'sys_open_test' shadows an earlier one drivers/misc/kgdbts.c:537:27: originally declared here drivers/misc/kgdbts.c:378:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:386:22: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:468:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:472:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:502:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:506:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:509:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:523:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:527:20: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:530:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:541:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:545:21: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:548:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:559:30: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:563:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:573:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:574:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:578:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:588:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:589:19: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:593:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:602:16: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:604:15: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:925:3: warning: Using plain integer as NULL pointer drivers/misc/kgdbts.c:938:3: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-05-05irda: fix !PNP support for drivers/net/irda/smsc-ircc2.cIngo Molnar
x86.git testing found this build bug on v2.6.26-rc1: ERROR: "pnp_get_resource" [drivers/net/irda/smsc-ircc2.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 the driver did not anticipate the case of !CONFIG_PNP which is rare but still possible. Instead of restricting the driver to PNP-only in the Kconfig space, add the (trivial) dummy struct pnp_driver - this is that other drivers use in the !PNP case too. The driver itself can in theory be initialized on !PNP too in certain cases, via smsc_ircc_legacy_probe(). Patch only minimally build tested, i dont have this hardware. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05irda: fix !PNP support in drivers/net/irda/nsc-ircc.cIngo Molnar
x86.git testing found the following build failure in latest -git: drivers/built-in.o: In function `nsc_ircc_pnp_probe': nsc-ircc.c:(.text+0xdf1b6): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf1d4): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf1ee): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf237): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf24c): undefined reference to `pnp_get_resource' drivers/built-in.o:nsc-ircc.c:(.text+0xdf266): more undefined references to `pnp_get_resource' follow make: *** [.tmp_vmlinux1] Error 1 triggered via this config: http://redhat.com/~mingo/misc/config-Sat_May__3_20_53_13_CEST_2008.bad while generally most users will have PNP enabled, drivers can support non-PNP build mode too - and most drivers implement it. That is typically done by providing a dummy pnp_driver structure that will not probe anything. The fallback routines in the driver will handle this dumber mode of operation too. This patch implements that. I have not tested whether this actually works on real hardware so take care. It does resolve the build bug. [ Another solution that is used by a few drivers is to exclude the driver in the Kconfig if PNP is disabled, via "depends on PNP", but this would limit the availability of the driver needlessly. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05sbus: Fix bpp driver build.David S. Miller
Using the variable name 'dev_name' in the top-level namespace is a bad idea. This conflicts with linux/device.h's inline function of the same name. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05[POWERPC] macintosh: ADB driver: adb_handler_sem semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05[POWERPC] macintosh: windfarm_smu_sat: semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05[POWERPC] macintosh: therm_pm72: driver_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-04ide: IDE_HFLAG_SERIALIZE_DMA bugfixBartlomiej Zolnierkiewicz
Patch re-ordering could be harmful: commit 1fd1890594bd355a4217f5658a34763e77decee3 Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Sat Apr 26 22:25:24 2008 +0200 ide: add IDE_HFLAG_SERIALIZE_DMA host flag ... is buggy because ->init_dma method / ide_hwif_setup_dma() is called before IDE_HFLAG_SERIALIZE_DMA host flag is checked. Fix it by checking IDE_HFLAG_SERIALIZE[_DMA] after DMA initialization. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-04[ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driverLinus Walleij
This fixes some two minor clk issues. The first is a comparison where a byte will probably wrap around to 0 instead of being saturated to 255, shouldn't be triggered very often but need fixing. The second is an attempt by the driver to adjust MCLK down to the maximum frequency according to the spec, so we don't accidentally overclock the PL18x block. None of the mach-{versatile|integrator|lh7a40x} that use it in-tree seem to have a problem with this (all are well below 100MHz, typically 33MHz), but some day there will be a problem. This is not applied on top of the earlier mmci patch for race condition but rather a clean 2.6.25, but I guess it applies without major protests anyway. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-04niu: Fix probing regression for maramba on-board chips.David S. Miller
Changeset 7f7c4072ea552f97a0898331322f71986a97299c ("niu: Determine the # of ports from the card's VPD data") caused maramba on-board NIU ports to stop probing properly. The old code had a fallback that would use a num_ports value of 4 if all the probing methods failed, but that was removed. This restores the fallback of 4 ports, to get things working again. Bump driver version and release date. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03sparc video: make blank use proper constantRobert Reif
Make blank functions use proper constant for unblanking. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03lapbeth: Release ->ethdev when unregistering device.David S. Miller
Otherwise it leaks forever. Based upon a report by Roland <devzero@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03sparc: tcx.c remove unnecessary functionRobert Reif
From: Robert Reif <reif@earthlink.net> Replaced tcx_init_one with tcx_probe. Fixed some checkpatch problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: PMU battery: filenames in sysfs with spaces pda_power: add init and exit function callbacks
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) rose: Wrong list_lock argument in rose_node seqops netns: Fix reassembly timer to use the right namespace netns: Fix device renaming for sysfs bnx2: Update version to 1.7.5. bnx2: Update RV2P firmware for 5709. bnx2: Zero out context memory for 5709. bnx2: Fix register test on 5709. bnx2: Fix remote PHY initial link state. bnx2: Refine remote PHY locking. bridge: forwarding table information for >256 devices tg3: Update version to 3.92 tg3: Add link state reporting to UMP firmware tg3: Fix ethtool loopback test for 5761 BX devices tg3: Fix 5761 NVRAM sizes tg3: Use constant 500KHz MI clock on adapters with a CPMU hci_usb.h: fix hard-to-trigger race dccp: ccid2.c, ccid3.c use clamp(), clamp_t() net: remove NR_CPUS arrays in net/core/dev.c net: use get/put_unaligned_* helpers bluetooth: use get/put_unaligned_* helpers ...
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Delete prom_stdin and prom_stdout. sparc32: More memory probing consolidation. sparc32: Kill totally unused memory information tables. sparc64: Fix syscall restart, for real... serial: Fix sparc driver name strings. sparc64: Stop creating dummy root PCI host controller devices.
2008-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Remove unsupported wakeup sources [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static [POWERPC] PS3: Add time include to lpm [POWERPC] Fix slb.c compile warnings [POWERPC] Xilinx: Fix compile warnings [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c [RAPIDIO] fix current kernel-doc notation [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot Fix a potential issue in mpc52xx uart driver [POWERPC] mpc5200: Allow for fixed speed MII configurations [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-02bnx2: Update version to 1.7.5.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Update RV2P firmware for 5709.Michael Chan
The new RV2P firmware fixes 2 issues: 1. The jumbo rx buffer page size is now configurable and set to the proper PAGE_SIZE. Before, it was assumed to be always 4K. 2. Driver sometimes would crash when receiving jumbo packets mixed with firmware management packets. This was caused by the old firmware DMA'ing to the wrong address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Zero out context memory for 5709.Michael Chan
We should zero out the context memory for 5709 before each reset. When we resume after suspend for example, the memory may not be zero and the chip may not function correctly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Fix register test on 5709.Michael Chan
The register BNX2_CTX_STATUS (0x1004) should be skipped on 5709 as it contains reserved bits. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Fix remote PHY initial link state.Michael Chan
On some remote PHY blade systems, the driver receives no initial link interrupt. As a result, the GMII/MII MAC mode does not get setup properly. To fix this problem, we add an initial poll of the link state after chip reset. With this change, the setting of the initial carrier state in the init code can be eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Refine remote PHY locking.Michael Chan
bnx2_set_remote_link() should be called under bp->phy_lock to protect against concurrent polling and interrupt calls. This change is needed by the next patch which will add one initial poll of the remote PHY link status. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Update version to 3.92Matt Carlson
This patch updates the version number to 3.92. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Add link state reporting to UMP firmwareMatt Carlson
All variants of the 5714, 5715, and 5780 offer a feature called the "Universal Management Port". This feature is implemented in firmware and is largely transparent to the driver, except... It turns out that the UMP firmware needs to know the current status of the link. Because the firmware cannot touch the PHY registers while the driver is in control of the device, it needs the driver to report link status changes through an additional handshaking mechanism. Without this handshake, it has been observed in the field that the UMP firmware will not operate correctly. This patch implements the new handshake with the UMP firmware. Since the handshake uses the same mechanism ASF heartbeats use, code was added to detect and wait for completion of a pending previous event. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Fix ethtool loopback test for 5761 BX devicesMatt Carlson
A CPMU related loopback test bug existed for AX revisions of the 5761. While that errata has been fixed, the CPMU still slows down the core clock too far to run the loopback test successfully. This patch disables the CPMU LINK_SPEED mode just like we do with the AX revisions of the 5761 and all revisions of the 5784. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Fix 5761 NVRAM sizesMatt Carlson
The 5761 NVRAM sizes assigned to the nvram_size member are half as big as they should be. This patch corrects the NVRAM sizes and replaces the hardcoded constants with preprocessor constants for readability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-06 01:42:37 +0000