aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-26[NET]: Marking struct pernet_operations __net_initdata was inappropriateEric W. Biederman
It is not safe to to place struct pernet_operations in a special section. We need struct pernet_operations to last until we call unregister_pernet_subsys. Which doesn't happen until module unload. So marking struct pernet_operations is a disaster for modules in two ways. - We discard it before we call the exit method it points to. - Because I keep struct pernet_operations on a linked list discarding it for compiled in code removes elements in the middle of a linked list and does horrible things for linked insert. So this looks safe assuming __exit_refok is not discarded for modules. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (40 commits) USB: open disconnect race in usblcd USB: disconnect open race in legousbtower USB: open disconnect race in iowarrior USB: missing error check in emi62 USB: missing error check in emi26 USB: usb_serial_resume bug fix USB: remove new OHCI build warnings USB: amd5536udc - remove set_mwi() compiler warning USB: usbserial - fix potential deadlock between write() and IRQ usb: serial/pl2303: support for IO Data Device RSAQ5 USB: fix read vs. disconnect race in cytherm driver USB: fix locking in idmouse USB: fix interface sysfs file-creation bug USB: fix ssb_ohci_probe() build bug USB: pl2303: remove can't happen checks, set speed properly and report baud rate USB: mos7840: Clean up old checks and stuff USB rio500.c: fix check-after-use USB iowarrior.c: fix check-after-use USB: add URB_FREE_BUFFER to permissible flags USB: isd200: sort out USB/IDE dependancy mess ...
2007-10-25Merge branch 'warnings-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'warnings-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ISDN/sc: fix longstanding warning
2007-10-25Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Explicitly call fib_get_table() in fib_frontend.c [NET]: Use BUILD_BUG_ON in net/core/flowi.c [NET]: Remove in-code externs for some functions from net/core/dev.c [NET]: Don't declare extern variables in net/core/sysctl_net_core.c [TCP]: Remove unneeded implicit type cast when calling tcp_minshall_update() [NET]: Treat the sign of the result of skb_headroom() consistently [9P]: Fix missing unlock before return in p9_mux_poll_start [PKT_SCHED]: Fix sch_prio.c build with CONFIG_NETDEVICES_MULTIQUEUE [IPV4] ip_gre: sendto/recvfrom NBMA address [SCTP]: Consolidate sctp_ulpq_renege_xxx functions [NETLINK]: Fix ACK processing after netlink_dump_start [VLAN]: MAINTAINERS update [DCCP]: Implement SIOCINQ/FIONREAD [NET]: Validate device addr prior to interface-up
2007-10-25Merge branch 'sg' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'sg' of git://git.kernel.dk/linux-2.6-block: fix sg_phys to use dma_addr_t ub: add sg_init_table for sense and read capacity commands x86: pci-gart fix blackfin: fix sg fallout xtensa: dma-mapping.h is using linux/scatterlist.h functions, so include it SG: audit of drivers that use blk_rq_map_sg() arch/um/drivers/ubd_kern.c: fix a building error SG: Change sg_set_page() to take length and offset argument AVR32: Fix sg_page breakage mmc: sg fallout m68k: sg fallout More SG build fixes sg: add missing sg_init_table calls to zfcp SG build fix
2007-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguestLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: documentation update lguest: Add to maintainers file. lguest: build fix lguest: clean up lguest_launcher.h lguest: remove unused "wake" element from struct lguest lguest: use defines from x86 headers instead of magic numbers lguest: example launcher header cleanup.
2007-10-25Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_nv: SWNCQ should not apply to MCP61 libata-core: Be a bit more relaxed about early DMA zero devices ahci: ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset(), take #2 Fix pata_icside build for recent libata API changes libata: cosmetic clean up in ata_eh_reset() libata-core.c: make 2 functions static [libata] Create internal helper ata_dev_set_feature()
2007-10-25Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [netdrvr] forcedeth: add MCP77 device IDs rndis_host: reduce MTU instead of refusing to talk to devices with low max packet size cpmac: update to new fixed phy driver interface cpmac: convert to napi_struct interface cpmac: use print_mac() instead of MAC_FMT natsemi: fix oops, link back netdevice from private-struct ehea: fix port_napi_disable/enable bonding/bond_main.c: fix cut'n'paste error make bonding/bond_main.c:bond_deinit() static drivers/net/ipg.c: cleanups remove Documentation/networking/net-modules.txt
2007-10-25Fix /proc/acpi/alarm BCD alarm encodingsLinus Torvalds
This fixes some totally illogical and wrong code that converts things to and from BCD mode essentially randomly, does math on values in BCD mode etc etc. Introduce a few helper functions to make it a bit more obvious what is going on, and make sure that we always do all the arithmetic (and anythign else, for that matter) in binary, not BCD. Tested by Mark Lord, who found the problem originally, and also pushed the patch back and reminded me about it. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-25USB: open disconnect race in usblcdOliver Neukum
this driver has a possible use after free due to a race when disconnect and open handle intfdata without a lock. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: disconnect open race in legousbtowerOliver Neukum
again, possible use after free due to touching intfdata without lock. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: open disconnect race in iowarriorOliver Neukum
the driver sets intfdata to NULL without lock. Data structures can be freed and accessed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: missing error check in emi62Oliver Neukum
the emi62 also lacks an error check. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: missing error check in emi26Oliver Neukum
this drivers lacks an error check. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: usb_serial_resume bug fixSarah Sharp
Avoid potential null pointer dereference. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: remove new OHCI build warningsDavid Brownell
Remove various newly-introduced compiler warnings for OHCI. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: amd5536udc - remove set_mwi() compiler warningDavid Brownell
Get rid of pointless pci_set_mwi() compiler warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: usbserial - fix potential deadlock between write() and IRQJiri Kosina
USB: usbserial - fix potential deadlock between write() and IRQ usb_serial_generic_write() doesn't disable interrupts when taking port->lock, and could therefore deadlock with usb_serial_generic_read_bulk_callback() being called from interrupt, taking the same lock. Fix it. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25usb: serial/pl2303: support for IO Data Device RSAQ5Masakazu Mokuno
This patch adds support for the IO Data Device USB-RSAQ5, PL2303 based USB-serial converter, to pl2303 driver Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix read vs. disconnect race in cytherm driverOliver Neukum
the disconnect method of this driver set intfdata to NULL before removing attribute files. The attributes' read methods will happily follow the NULL pointer. Here's the correct ordering. Signed-off-by : Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix locking in idmouseOliver Neukum
Pete caused me to lock at buggy drivers in this respect. The idmouse has a race between open and disconnect. This patch - solves the open/disconnect race - switches locking to mutexes Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix interface sysfs file-creation bugAlan Stern
This patch (as1005) fixes a rather subtle problem. When usb_set_configuration() registers the interfaces and their files in sysfs, it doesn't expect those files to exist already. But when an interface is registered, its driver may call usb_set_interface() and thereby cause the sysfs files to be created. The result is an error when usb_set_configuration() goes on to create those same files again. The (not-so-great) solution is to have usb_set_configuration() remove any existing files before creating them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix ssb_ohci_probe() build bugIngo Molnar
fix ssb_ohci_probe() build bug: drivers/built-in.o: In function `ssb_ohci_probe': ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable' ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base' ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size' ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable' [...] the reason was that this Kconfig combination was allowed: CONFIG_SSB=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_SSB=y the fix is to require a modular USB_OHCI_HCD build when SSB is modular. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: pl2303: remove can't happen checks, set speed properly and report baud rateAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: mos7840: Clean up old checks and stuffAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB rio500.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we have already oops'ed if "dev" was NULL in these places. Since "dev" being NULL isn't possible at these places this patch removes the NULL checks. Additionally, I've fixed the formatting of the if's. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB iowarrior.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we have already oops'ed if "dev" was NULL. Since "dev" being NULL doesn't seem to be possible here this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: add URB_FREE_BUFFER to permissible flagsOliver Neukum
URB_FREE_BUFFER needs to be allowed in the sanity checks to use drivers that use that flag. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: isd200: sort out USB/IDE dependancy messAlan Cox
The ISD200 driver imports a single trivial routine from the IDE layer and in doing so creates a mess of dependancies that drag in the entire old IDE layer. Even more sad - it does this for a routine which is usually (little endian) a null function! - Copy the function into ISD200 - Rename it so it doesn't clash with the ide header prototype - Remove all the depend constraints Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: FTDI Elan driver: Convert ftdi->u132_lock to mutexMatthias Kaehlcke
FTDI Elan driver: Convert the semaphore ftdi->u132_lock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix scheduling of Iso URBs in uhci-hcdAlan Stern
This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag the same as other host controller drivers, namely, to schedule an Iso URB for the first available time slot that hasn't already expired. URBs in which the flag isn't set will be scheduled for the first slot following the last URB, even if it has expired. This fixes a problem reported by Martin Bachem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: io_edgeport: cleanups, and tty speed reportingAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ftd_sio cleanups and updates for new termios work checkpatch fixesAndrew Morton
WARNING: line over 80 characters #23: FILE: drivers/usb/serial/ftdi_sio.c:297: + speed_t force_baud; /* if non-zero, force the baud rate to this value */ ERROR: use tabs not spaces #31: FILE: drivers/usb/serial/ftdi_sio.c:881: +^I$ ERROR: use tabs not spaces #39: FILE: drivers/usb/serial/ftdi_sio.c:890: +^I$ WARNING: line over 80 characters #111: FILE: drivers/usb/serial/ftdi_sio.c:1956: + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ftd_sio: cleanups and updates for new termios workAlan Cox
- Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: cp2101: convert to new termiosAlan Cox
- Convert to new baud rate functions - Add baud rate reporting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: whiteheat: clean up can't happen checks and encode baud rateAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25usb-serial: handle NULL termios methods as "no hardware changing support"Alan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: sierra: termiosAlan Cox
No hardware termios setting in this case so keep the old settings Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: option: termios handlingAlan Cox
For the devices that have no hardware settings set up the termios return properly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: kobil_sct: termios encoding fixupsAlan Cox
- Clear unsupported CMSPAR - Encode resulting speeds Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: keyspan termios tidyAlan Cox
- Clear unsupported CMSPAR bit - Clean up long chains of a->b-> a bit - Encode baud rate back into tty structure properly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ir_usb: termios handlingAlan Cox
- Clean up paranoia checks - Propogate back a correct fixed termios Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: empeg: clean up and handle speedsAlan Cox
The empeg is pretty fixed. Tidy up the long foo->bar->baz stuff and encode the fixed speed properly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: digi_acceleport: fix termios and also readability a bitAlan Cox
- Expand some x&y to x & y so I could read it when checking - Clear CMSPAR bit in the termios (as the driver does not support it) - Encode the speed using the new tty_encode_baud_rate facility Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ch341: fix termios handlingAlan Cox
The ch341 currently doesn't support most of the hardware setting. So to keep the termios data right we propogate the old termios hardware values back then encode the speed. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25usb serial: kill another case we pass NULL and shouldn'tAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: ark3116: update termios handlingAlan Cox
- Set the i/ospeed in the initial termios properly - Use the tty_encode_baud_rate functions to report resulting rates properly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25serial: stop passing NULL to functions that expect dataAlan Cox
Earlier patches have removed the checking for old v new differences from the USB drivers so we can now pass in a valid blank old termios so that we don't to fill the drivers with magic hacks for console support Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: add new Novatel device ids to option driverGreg Kroah-Hartman
This adds support for the U727 and MC950 devices. Cc: Rony Sarkis <rsarkis@nvtl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25[netdrvr] forcedeth: add MCP77 device IDsAyaz Abdulla
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 05:24:09 +0000