aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-09-04V4L/DVB (8874): gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's.Hans de Goede
- Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is the same change as done for the other initdata tables in a previous patch. - Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102 drivers are both enabled. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8873): gspca: Bad image offset with rev012a of spca561 and adjust ↵Hans de Goede
exposure. -Make raw bayer header size change from 20 to 16 affect rev072a only, my 2 rev012a cams both have a header size of 20 -While testing this I also tested the new exposure setting (good work on finding the register JF), and after quite a bit of testing have found out the exact meaning of the register, this patch modifies setexposure to control the exposure over a much wider range. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8872): gspca: Bad image format and offset with rev072a of spca561.Jean-Francois Moine
- have 2 pixfmt tables - offset of Bayer frames at 16 instead of 20. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8870): gspca: Fix dark room problem with sonixb.Hans de Goede
When using the sonixb driver in a dark room and given that the autoexposure algorithm starts with a setting most suitable for daylight, the picture produced by the cam may actually be 100% black leading to a avg_lum value of 0, so an avg_lum value of 0 does not always signal an exposure settings change (which it normally does). This patch adds a check for the really black image case and stops dropping all frames as invalid in this case. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8869): gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 ↵Hans de Goede
to gspca. This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca). It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8868): gspca: Support for vga modes with sif sensors in sonixb.Hans de Goede
- Add documentation for some known registers - Add support for vga modes (320x240, 160x120) for sif sensors - Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge only thing and keeping the flag was becoming awkward. - Fixup ov6650 and pas106 auto exposure window settings Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8844): dabusb_fpga_download(): fix a memory leakAdrian Bunk
This patch fixes a memory leak in an error path. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8843): tda10048_firmware_upload(): fix a memory leakAdrian Bunk
This patch fixes a memory leak ("fw" wasn't freed). Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8842): vivi_release(): fix use-after-freeAdrian Bunk
video_device_release() does kfree(), which made the following printk() doing a use-after-free. printk() first and release then. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8840): dib0700: add basic support for Hauppauge Nova-TD-500 (84xxx)Michael Krufky
This adds basic support for the Hauppauge Nova-TD-500 84xxx series. A future patch will allow for one aerial input to supply both tuners. With the current code, an aerial must be plugged into each antannae input in order for both tuners to function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8839): dib0700: add comment to identify 35th USB id pairMichael Krufky
This comment helps to make the code more readable. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8837): dvb: fix I2C adapters name sizeJean Delvare
Some DVB drivers are incorrectly assuming that the size of i2c_adapter.name is I2C_NAME_SIZE. Here's a fix. Also change strncpy to strlcpy, as the former is error-prone (and was indeed incorrectly used.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Uwe Bugla <uwe.bugla@gmx.de> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8835): gspca: Same pixfmt as the sn9c102 driver and raw Bayer added ↵Hans de Goede
in sonixb. 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8834): gspca: Have a bigger buffer for sn9c10x compressed images.Hans de Goede
Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8833): gspca: Cleanup the sonixb code.Hans de Goede
-the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8832): gspca: Bad pixelformat of vc0321 webcams.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8831): gspca: Resolve webcam conflicts between some drivers.Hans de Goede
-remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8830): gspca: Move some probe code to the new init function.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8829): gspca: Have a clean kmalloc-ated buffer for USB exchanges.Jean-Francois Moine
The USB buffer may be used for DMA and there may be a caching problem if the buffer is part of the device structure. Thanks to Alan Stern. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8828): gspca: Set the clock at the end of initialization in sonixj.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8827): gspca: Stop pac7302 autogain oscillation.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8826): gspca: Webcam Labtec 2200 (093a:2626) added in pac7311.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8825): gspca: More controls for pac73xx and new webcam 093a:2624.Hans de Goede
-Add usb id for 093a:2624 (pac7302) -Report some controls to userspace with 7302 only, as they are 7302 only -Add gain and exposure controls -Add autogain -Fix 7302 imaged being mirrored by default Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8824): gspca: Too much code removed in the suspend/resume changeset.Jean-Francois Moine
- the stream must stop when the main application closes the device. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8823): gspca: H and V flips work for ov7670 only in ov519.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8822): gspca: Change some subdriver functions for suspend/resume.Jean-Francois Moine
- new function 'init' called on probe and resume - remove the functions 'open' and 'closed' - 'stopN' and 'stop0' are optional Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8820): gspca: Change initialization and gamma of zc3xx - pas106.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8819): gspca: Initialize the ov519 at open time and source cleanup.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8818): gspca: Reinitialize the device on resume.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8817): gspca: LED and proble changes in sonixb.Hans de Goede
- turn the led of the cam off after plugging in the cam - move the probe code from open to config, so that if the probe fails we never register Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8816): gspca: Set disabled ctrls and fix a register pb with ovxxxx ↵Hans de Goede
in sonixb. - set some controls as disabled instead of copying the device descr. - in the ov6650 / 7650 exposure code clamp reg 11 before (instead of after) using it to calculate reg 10. - disable brightness (instead of ignoring it) for the TAS5110. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8815): gspca: Fix problems with disabled controls.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8814): gspca: Set DISABLED the disabled controls at query control time.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8813): gspca: Adjust SOF detection for pac73xx.Hans de Goede
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8812): gspca: Do pac73xx webcams work.Hans de Goede
- documentation for some registers - some preparations for adding autogain_n_exposure functionality - various pac7311 fixes - disable brightness and colors controls for 7311 - fix contrast control for 7311 - add hflip and vflip controls for 7311 - minimal jpeg header - proper SOF detection Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8810): gspca: Compile error when CONFIG_PM not defined.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8809): gspca: Revert commit 9a9335776548d01525141c6e8f0c12e86bbde982Hans de Goede
the previous patch (sensor upside down). Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8805): Steven Toth email address changeSteven Toth
I need this so I can better isolate my linux email from my corporate email. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8804): s5h1411: Enable QAM_AUTO modeSteven Toth
If apps pass QAM_AUTO then we need to obey it. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8803): s5h1409: Enable QAM_AUTO modeSteven Toth
If apps pass QAM_AUTO then we need to obey it. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8790): saa7115: call i2c_set_clientdata only when state != NULLHans Verkuil
Not a bug as such, but it looks really strange doing this before checking whether the state structure could be allocated. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8779): v4l: fix more incorrect video_register_device result checksHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8778): radio: fix incorrect video_register_device result checkHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8769): cx18: Simplify queue flush logic to prevent oops in ↵Andy Walls
cx18_flush_queues() cx18: Simplify queue flush logic to prevent oops in cx18_flush_queues(). If accounting of a queue is in error, logic borrowed from ivtv will cause an oops when flushing the queues for a stream. This change greatly simplifies the queue flush logic, and sets the queue back to sane defaults on a flush. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warningsHans Verkuil
Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8751): vivi: Fix some issues at vivi register routineMauro Carvalho Chehab
This patch fixes several small issues at vivi register routines: 1) minor and n_devs should be unsigned; 2) n_devs = 0 were not properly handled; 3) if n_devs specify a high number, the driver would just roll back and won't register any device. The proper behaviour is to keep all succeded devices registered; 4) both n_devs and minor were using 0 as permissions. Better to have them with 0444. With the current patch, if n_devs specify a very large value, it will register all possible devices. For example, on a machine without any other V4L drivers loaded, with this patch, we will have something like: vivi: V4L2 device registered as /dev/video0 vivi: V4L2 device registered as /dev/video1 vivi: V4L2 device registered as /dev/video2 ... vivi: V4L2 device registered as /dev/video31 video_register_device_index: get_index failed Video Technology Magazine Virtual Video Capture Board ver 0.5.0 successfully loaded. 5) The number of allocated devices on success is now kept at n_devs: $ cat /sys/module/vivi/parameters/n_devs 32 Thanks to Henne <henne@nachtwindheim.de> for pointing that there were some issues at vivi. Cc: Henne <henne@nachtwindheim.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8750): V4L: check inval in video_register_device_index()Henrik Kretzschmar
Better check the video_device pointer before using it. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8749): Fix error code, when camera is not turned on by sonypiMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8728): 1-make-pms-not-autoprobe-when-builtin updateRene Herman
On 10-08-08 23:37, Alan Cox wrote: > > Would probably make the printk "pms: not enabled, use pms.enable=1 to > probe" > > So you know > a) What is wittering about not being probed > b) How to undo it. > > But thats trivia really. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-09-03V4L/DVB (8727): V4L1: make PMS not autoprobe when builtin.Rene Herman
The old Mediavision Pro Movie Studio legacy ISA V4L1 driver was found to hang the boot during Ingo Molnar's testing of randconfig kernels. Have it require a "pms.enable=1" kernel parameter to enable the driver when builtin which avoids such problems. This is a deprecated and, very likely, unused driver. Nothing changes modular behaviour moreover. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 09:48:55 +0000