aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: [PATCH] Generic HID layer - update MAINTAINERS input/hid: Supporting more keys from the HUT Consumer Page [PATCH] Generic HID layer - build: USB_HID should select HID
2006-12-18[CONNECTOR]: Replace delayed work with usual work queue.Evgeniy Polyakov
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[CONNECTOR]: Fix compilation breakage introduced recently.Evgeniy Polyakov
Linus has changed work queue structure and has not tested it with connector compiled in, his changes break the build. Attached patch fixes compilation error. Patch is against commit 99f5e9718185f07458ae70c2282c2153a2256c91. Thanks to Toralf Förster for pointing this out. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: Update version and reldate.Michael Chan
Update version to 3.71. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: Power down/up 5906 PHY correctly.Michael Chan
The 5906 PHY requires a special register bit to power down and up the PHY. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: Fix race condition when calling register_netdev().Michael Chan
Hot-plug scripts can call tg3_open() as soon as register_netdev() is called in tg3_init_one(). We need to call pci_set_drvdata() before register_netdev(), and netif_carrier_off() needs to be moved to tg3_open() to avoid race conditions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: Assign tp->link_config.orig_* values.Michael Chan
tp->link_config.orig_* values must be assigned during tg3_set_settings() because these values will be used to setup the link speed during tg3_open(). Without these assignments, the link speed settings will be all messed by if tg3_set_settings() is called when the device is down. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[BNX2]: Fix minor loopback problem.Michael Chan
Use the configured MAC address instead of the permanent MAC address for loopback frames. Update version to 1.5.2. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[BNX2]: Fix bug in bnx2_nvram_write().Michael Chan
Length was not calculated correctly if the NVRAM offset is on a non- aligned offset. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[BNX2]: Fix panic in bnx2_tx_int().Michael Chan
There was an off-by-one bug in bnx2_tx_avail(). If the tx ring is completely full, the producer and consumer indices may be apart by 256 even though the ring size is only 255. One entry in the ring is unused and must be properly accounted for when calculating the number of available entries. The bug caused the tx ring entries to be reused by mistake, overwriting active entries, and ultimately causing it to crash. This bug rarely occurs because the tx ring is rarely completely full. We always stop when there is less than MAX_SKB_FRAGS entries available in the ring. Thanks to Corey Kovacs <cjk@techma.com> and Andy Gospodarek <agospoda@redhat.com> for reporting the problem and helping to collect debug information. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[TG3]: replace kmalloc+memset with kzallocYan Burman
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] longhaul compile fix. [CPUFREQ] Advise not to use longhaul on VIA C7. [CPUFREQ] set policy->curfreq on initialization [CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c [CPUFREQ] fixes typo in cpufreq.c
2006-12-17[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.Fabrice Knevez
"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled = enable" in sunkbd_enable (obvious) Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[PATCH] m68k trivial build fixesAl Viro
amikbd: missing declaration sun3_NCR5380: more work_struct mess sun3_NCR5380: cast is not an lvalue Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-16Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Use DEFINE_MUTEX() instead of mutex_init() IB/mthca: Add HCA profile module parameters IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G IB: Fix ib_dma_alloc_coherent() wrapper
2006-12-16[PATCH] pata_via: Cable detect errorAlan
The UDMA66 VIA hardware has no controller side cable detect bits we can use. This patch minimally fixes the problem by reporting unknown in this case and using drive side detection. The old drivers/ide code does some additional tricks but those aren't appropriate now we are in -rc. Without this update UDMA66 via controllers run slowly. They don't fail so it's a borderline call whether this is -rc material or not. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] Fix help text for CONFIG_ATA_PIIXAlan
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] initializer entry defined twice in pata_rz1000Ira Snyder
This removes the extra definition of the .error_handler member in the pata_rz1000 driver. Signed-off-by: Ira W. Snyder <kernel@irasnyder.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata: fix platform_device_register_simple() error checkAkinobu Mita
The return value of platform_device_register_simple() should be checked by IS_ERR(). Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ahci: do not mangle saved HOST_CAP while resetting controllerTejun Heo
Do not mangle with HOST_CAP while resetting controller. The code is there for a historical reason. The mangling breaks controller feature detection and 0 PORTS_IMPL workaround code. This problem was spotted by Manoj Kasichainula. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Manoj Kasichainula <manoj@io.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)Tejun Heo
Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)Jeff Garzik
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] use kmap_atomic(KM_IRQ0) in SCSI simulatorJeff Garzik
We are inside spin_lock_irqsave(). quoth akpm's debug facility: [ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 232.232000] ata1.00: configured for UDMA/33 [ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic() [ 232.404000] [<c01162e6>] kmap_atomic+0xa9/0x1ab [ 232.404000] [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30 [ 232.404000] [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87 [ 232.404000] [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309 [ 232.404000] [<c01729d5>] end_bio_bh_io_sync+0x0/0x37 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f [...] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata_piix: use piix_host_stop() in ich_pata_opsTejun Heo
piix_init_one() allocates host private data which should be freed by piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop() while merging, leaking 4 bytes on driver detach. Fix it. This was spotted using Kmemleak by Catalin Marinas. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Catalin Marinas <catalin.marinas@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9Jason Gaston
This updated patch adds the Intel ICH9 IDE mode SATA controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-15IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()Roland Dreier
mthca_device_mutex() can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). This saves a bit of text and shrinks the source by a line, so we may as well do it.... Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15IB/mthca: Add HCA profile module parametersLeonid Arsh
Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4GRoland Dreier
struct srp_device.fmr_page_mask was unsigned long, which means that the top part of addresses above 4G was being chopped off on 32-bit architectures. Of course nothing good happens when data from SRP targets is DMAed to the wrong place. Fix this by changing fmr_page_mask to u64, to match the addresses actually used by IB devices. Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen <davem@systemfabricworks.com> for help diagnosing the bug and testing the fix. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15[S390] cio: css_register_subchannel race.Stefan Bader
Asynchronous probe can release memory of a subchannel before css_get_ssd_info is called. To fix this call css_get_ssd_info before registering with driver core. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] Fix reboot hang on LPARsMichael Holzheu
Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] sclp_cpi module license.Christian Borntraeger
sclp_cpi is GPL. Make the module not taint the kernel Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] zcrypt: module unload fixes.Ralph Wuerthner
Add code to reset all queues for a domain and add missing tasklet_kill call to ap bus module exit code. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] Hipersocket multicast queue: make sure outbound handler is calledUrsula Braun
A HiperSocket multicast queue works asynchronously. When sending buffers, the buffer state change from PRIMED to EMPTY may happen delayed. Reschedule the checking for changes in the outbound queue, if there are still PRIMED buffers. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-14input/hid: Supporting more keys from the HUT Consumer PageFlorian Festi
On USB keyboards lots of hot/internet keys are not working. This patch adds support for a number of keys from the USB HID Usage Table (http://www.usb.org/developers/devclass_docs/Hut1_12.pdf). It also adds several new key codes. Most of them are used on real world keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE, NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes". I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a remote control in parallel and it makes sense to have them behave differently. Signed-off-by: Florian Festi <ffesti@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2006-12-14[PATCH] Generic HID layer - build: USB_HID should select HIDJiri Kosina
Let CONFIG_USB_HID imply CONFIG_HID. Making it only dependent might confuse users to choose CONFIG_HID, but no particular HID transport drivers. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2006-12-13Driver core: Make platform_device_add_data accept a const pointerScott Wood
platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13Driver core: "platform_driver_probe() can save codespace": save codespaceAndrew Morton
This function can be __init Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13driver core: delete virtual directory on class_unregister()Akinobu Mita
Class virtual directory is created as the need arises. But it is not deleted when the class is unregistered. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] Add support for Korenix 16C950-based PCI cardsRussell King
This adds initial support to 8250-pci for the Korenix Jetcard PCI serial cards. The JC12xx cards are standard RS232-based serial cards utilising the Oxford 16C950 device. The JC14xx are RS422/RS485-based cards, but in order for these to be supported natively, we will need additional tweaks to the 8250 layers so we can specify some values for the 950's registers. Hence, these two entries are commented out. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Fixup cciss error handling [PATCH] Allow as-iosched to be unloaded [PATCH 2/2] cciss: remove calls to pci_disable_device [PATCH 1/2] cciss: map out more memory for config table [PATCH] Propagate down request sync flag Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
2006-12-13Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add MAINTAINERS entry for new ams driver hwmon: New AMS hardware monitoring driver hwmon/w83793: Add documentation and maintainer hwmon: New Winbond W83793 hardware monitoring driver hwmon: Update Rudolf Marek's e-mail address hwmon/f71805f: Fix the device address decoding hwmon/f71805f: Always create all fan inputs hwmon/f71805f: Add support for the Fintek F71872F/FG chip hwmon: New PC87427 hardware monitoring driver hwmon/it87: Remove the SMBus interface support hwmon/hdaps: Update the list of supported devices hwmon/hdaps: Move the DMI detection data to .data hwmon/pc87360: Autodetect the VRM version hwmon/f71805f: Document the fan control features hwmon/f71805f: Add support for "speed mode" fan speed control hwmon/f71805f: Support DC fan speed control mode hwmon/f71805f: Let the user adjust the PWM base frequency hwmon/f71805f: Add manual fan speed control hwmon/f71805f: Store the fan control registers
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] sstfb: add sysfs interfaceHelge Deller
Modify the sstfb (Voodoo1/2) driver: - fix a memleak when removing the sstfb module - fix sstfb to use the fbdev default videomode database - add module option "mode_option" to set initial screen mode - add sysfs-interface to turn VGA-passthrough on/off via /sys/class/graphics/fbX/vgapass - remove old debug functions from ioctl interface Signed-off-by: Helge Deller <deller@gmx.de> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] fbdev: remove references to non-existent fbmon_valid_timings()Geert Uytterhoeven
Remove references to non-existent fbmon_valid_timings() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] HPT37x: read f_CNT saved by BIOS from portSergei Shtylyov
The undocumented register BIOS uses for saving f_CNT seems to only be mapped to I/O space while all the other HPT3xx regs are dual-mapped. Looks like another HighPoint's dirty trick. With this patch, the deadly kernel oops on the cards having the modern HighPoint BIOSes is now at last gone! Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: HPT3xx: fix PCI clock detectionSergei Shtylyov
Use the f_CNT value saved by the HighPoint BIOS if available as reading it directly would give us a wrong PCI frequency after DPLL has already been calibrated by BIOS. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix the case of multiple HPT3xx chips presentSergei Shtylyov
init_chipset_hpt366() modifies some fields of the ide_pci_device_t structure depending on the chip's revision, so pass it a copy of the structure to avoid issues when multiple different chips are present. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix HPT3xx hotswap supportSergei Shtylyov
Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when tristating the bus (the MISC control 3/6 and soft control 2 need to be written to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF ioctl() handler was called instead which treated the state argument wrong. Also, get rid of the soft control reg. 1 wtite to enable IDE interrupt -- this is done in init_hpt37x() already... Have been tested on HPT370 and 371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: optimize HPT37x timing tablesSergei Shtylyov
Save some space on the timing tables by introducing the separate transfer mode table in which the mode lookup is done to get the index into the timing table itself. Get rid of the rest of the obsolete/duplicate tables and use one set of tables for the whole HPT37x chip family like the HighPoint open-source drivers do. Documnent the different timing register layout for the HPT36x chip family (this is my guesswork based on the timing values). Have been tested and works fine on HPT370/302/371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix HPT37x timing tablesSergei Shtylyov
Fix/remove bad/unused timing tables: HPT370/A 66 MHz tables weren't really needed (the chips are not UltraATA/133 capable and shouldn't support 66 MHz PCI) and had many modes over- and underclocked, HPT372 33 MHz table was in fact for 66 MHz and 50 MHz table missed UltraDMA mode 6, HPT374 33 MHz table was really for 50 MHz... (Actually, HPT370/A 33 MHz tables also have issues. e.g. HPT370 has PIO modes 0/1 overlocked.) There's also no need in the separate HPT374 tables because HPT372 timings should be the same (and those tables has UltraDMA mode 6 which HPT374 supports depending on HPT374_ALLOW_ATA133_6 #define)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>