aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-16V4L/DVB (11979): em28xx: don't create audio device if not supportedDevin Heitmueller
In cases where the device does not actually provide a USB audio class *or* vendor audio, do not load the driver that provides vendor audio support (such as the KWorld 2800d). Otherwise, the /dev/audio1 device file gets created and users get confused. Also, reworks the logic a bit so that we don't try to inspect the register content if the register read failed entirely. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11977): em28xx: Add Kworld 315 entryFranklin Meng
Added an entry for Kworld 315 (for while, dvb only) Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11976): em28xx: set up tda9887_conf in em28xx_card_setup()Franklin Meng
Added tda9887_conf set up into em28xx_card_setup() Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11973): gspca - ov534: Do the ov772x work again.Jean-Francois Moine
The scan of the image packets of the sensor ov772x was broken when the sensor ov965x was added. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11972): gspca - main: Skip disabled controls.Hans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11970): gspca - ov519: Add support for the ov518 bridge.Hans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11969): gspca - spca505: Reinitialize the webcam at resume time.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 driversHans Verkuil
Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11966): ov511: Fix unit_video parameter behaviorMauro Carvalho Chehab
Fix a regression caused by changeset 9133:64aed7485a43 - v4l: disconnect kernel number from minor Before the above changeset, ov511_probe used to allow forcing to use a certain specific set of video devices, like: modprobe ov511 unit_video=4,1,3 num_uv=3 So, assuming that you have 5 ov511 devices, and connect they one by one, they'll gain the following device numbers (at the connection order): /dev/video4 /dev/video1 /dev/video3 /dev/video0 /dev/video2 However, this was changed due to this change at video_register_device(): + nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr); With the previous behavior, a trial to register on an already allocated mirror would fail, and a loop would get the next requested minor. However, the current behavior is to get the next available minor instead of failing. Due to that, this means that the above modprobe parameter will give, instead: /dev/video5 /dev/video6 /dev/video7 /dev/video8 /dev/video9 In order to restore the original behavior, a static var were added, storing the amount of already registered devices. While there, it also fixes the locking of the probe/disconnect functions. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11964): b2c2: Fix problems with frontend attachmentTrent Piepho
The frontend attachment code didn't handle cases where the frontend partially failed to attach. For instance, when the demod was attached successfully but the tuner driver wasn't compiled or fails to init for some reason. In these cases we try to clean up the partial attachment and fail instead of proceeding with a broken frontend. If frontend registration fails, clean up with dvb_frontend_detach() rather than just calling the frontend's main release method. The former does some additional stuff, like release an attached tuner and take care of putting symbols when dynamic binding is used. In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that gets set before skystar2_rev23_attach() is called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11961): tvp514x: try_count off by oneRoel Kluin
With `while (try_count-- > 0)' try_count reaches -1 after the loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11960): v4l: generate KEY_CAMERA instead of BTN_0 key events on ↵Lennart Poettering
input devices A bunch of V4L drivers generate BTN_0 instead of KEY_CAMERA key presses. X11 is able to handle KEY_CAMERA automatically these days while BTN_0 is not treated at all. Thus it would be of big benefit if the camera drivers would consistently generate KEY_CAMERA. Some drivers (uvc) already do, this patch updates the remaining drivers to do the same. I only possess a limited set of webcams, so this isn't tested with all cameras. The patch is rather trivial and compile tested, so I'd say it's still good enough to get merged. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11959): se401: Fix unsafe use of sprintf with identical ↵Alan Cox
source/destination Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13435 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11958): usbvision-core.c: vfree does its own NULL checkFigo.zhang
vfree() does it's own NULL checking,so no need for check before calling it. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11957): dsbr100: change radio->muted to radio->status, update ↵Alexey Klimov
suspend/resume Patch renames radio->muted to radio->status, add defines for that variable, and fixes suspend/resume procedure. Radio->status set to STOPPED in usb_dsbr100_probe because of removing open call. Also, patch increases driver version. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11956): dsbr100: no need to pass curfreq value to dsbr100_setfreq()Alexey Klimov
Small cleanup of dsbr100_setfreq(). No need to pass radio->curfreq value to this function. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11955): dsbr100: remove usb_dsbr100_open/close callsAlexey Klimov
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11954): dsbr100: remove radio->users counterAlexey Klimov
Patch removes radio->users counter because it is not in use. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11953): videobuf-dma-sg: return -ENOMEM if vmalloc failsFigo.zhang
it is better return -ENOMEM than -EIO Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 HAndy Walls
This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog TV capture from the tuner working properly as well. DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of Leadtek. DVB-T 7 MHz has also been verified working with a change developed by Terry to the tuner-xc2028.c driver. Special thanks go to Terry Wu <terrywu2009@gmail.com> of Leadtek who provided the needed information and testing to get digital TV working for the Leadtek DVR3100 H. Reported-by: Terry Wu <terrywu2009@gmail.com> Tested-by: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11950): cx18: Split LeadTek PVR2100 and DVR3100 H into 2 separate ↵Andy Walls
card entries Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11948): uvcvideo: Ignore non-UVC trailing interface descriptors.Laurent Pinchart
Herton Ronaldo Krzesinski from Mandriva reported that one Bison Electronics webcam exposes a non-UVC interface descriptor. Instead of failing completely, ignore trailing non-UVC descriptors and move on. Thanks to Herton for reporting the problem and submitting a patch proposal. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11947): uvcvideo: Add support for FSC V30S webcamsLaurent Pinchart
The FSC WebCam V30S (18ec:3288) requires the MINMAX quirk. Add a corresponding entry in the device IDs list. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11946): uvcvideo: Add support for Aveo Technology webcamsLaurent Pinchart
The Aveo Technology USB 2.0 Camera (1871:0306) requires the PROBE_EXTRAFIELDS quirk. Add a corresponding entry in the device IDs list. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11945): uvcvideo: Don't accept to change the format when buffers ↵Laurent Pinchart
are allocated. Setting a new frame format or size will likely change the buffer size required to store a complete video frame. To avoid a buffer overflow, don't allow VIDIOC_S_FMT calls when video buffers are already allocated. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11944): uvcvideo: Add generic control blacklist.Laurent Pinchart
Another device (5986:0241) has been reported to advertise a UVC control it does not support. Rework the control blacklist to match devices by their VID:PID instead of trying to be clever about which controls might not be supported properly. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11942): gspca - m5602-ov9650: Reorder quirk list and add A7V quirkErik Andrén
The quirk list has grown and was in need of sorting. This is now done. Add a new vflip quirk for the ASUS A7V while we're at it. Thanks to Carsten Menzel for reporting. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11941): gspca - m5602-ov9650: Add vflip quirk for the ASUS A6VAErik Andrén
Add vflip quirk for the ASUS A6VA. Thanks to Salvo Di Rosa for reporting. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11940): gspca - m5602-s5k4aa: Add vflip quirk for the Lenovo Y300Erik Andrén
The Lenovo Y300 has its sensor upside down. Quirk it to gain normal functionality. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11938): big rework of TS for saa7134Dmitri Belimov
1. Add start/stop TS function. 2. Move setup DMA of TS to DMA function. 3. Write support cupture via MMAP 4. Rework startup and finish process, remove simple FSM. Tested-by: Hermann Pitton <hermann-pitton@arcor.de> Tested-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11937): vino: replace dma_sync_single with dma_sync_single_for_cpuFUJITA Tomonori
This replaces dma_sync_single() with dma_sync_single_for_cpu() because dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says: /* Backwards compat, remove in 2.7.x */ Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11936): Fix v4l2-device usage of i2c_unregister_device()Randy Dunlap
Fix v4l2-device usage of i2c_unregister_device() and handle the case of CONFIG_I2C=m & CONFIG_MEDIA_VIDEO=y. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11934): Change order for FM tuneDmitri Belimov
Change order data of buffer in FM simple_tune function. It is usefull for: 1. Set data of tuner with CP bit UP. 0xCE for MK5 or 0xC6 for MK3 2. When call simple_fm_tune, read this byte from config and overwrite this byte in function simple_radio_bandswitch for set CP bit to OFF. Of course it can be usefull for other tuner for overwrite default settings of FM. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11933): tuner-simple, tveeprom: Add Philips FQ1216LME MK3 analog tunerAndy Walls
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11932): ivtv: Add missing newlineAndy Walls
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11931): lnbp21: Add missing newlineAndy Walls
Reported-by: VDR User <user.vdr@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11930): TS continuity check: show error message when discontinuity ↵Abylay Ospan
detected or TEI flag detected in header Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11928): au0828: provide module option to disable USB speed checkDevin Heitmueller
Add an au0828 module option that allows a user to override the USB speed check. Intended for advanced users who understand the consequences of trying to use the device with a 12Mbps bus. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11927): em28xx: provide module option to disable USB speed checkDevin Heitmueller
Add an em28xx module option that allows a user to override the USB speed check. Intended for advanced users who understand the consequences of trying to use the device with a 12Mbps bus. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11926): tuner-core: fix warning introduced when cleaning up xc5000 ↵Devin Heitmueller
init routine This patch removes some remaining dead code. Warning showed up in Hans Verkuil's daily report after I committed hg changeset 7f2eea75118b. Thanks to Michael Krufky for bringing the warning to my attention. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11925): em28xx: Add support for the K-World 2800dDevin Heitmueller
Make the KWorld 2800d work properly. In this case, that means making the profile more generic so that it works for both the Pointnix Intra-Oral USB camera and the KWorld device. The device provides the audio through a pass-thru cable, so we don't need an actual audio capture profile (neither the K-World device nor the Pointnix have an onboard audio decoder). Thanks to Paul Thomas for providing sample hardware. Cc: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11924): au0828: Don't let device work unless connected to a high ↵Devin Heitmueller
speed USB port The au0828 basically just doesn't work at 12 Mbps. The isoc pipe needs nearly 200 Mbps for analog support, so users would see garbage video, and on the DVB/ATSC side scanning is likely to work but if the user tried to tune it would certainly appear to have failed. It's better to fail explicity up front and tell the user to plug into a USB 2.0 port, than to let the driver load and the user have weird problems with tuning and garbage video. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11923): em28xx: Don't let device work unless connected to a high ↵Devin Heitmueller
speed USB port The em28xx basically just doesn't work at 12 Mbps. The isoc pipe needs nearly 200 Mbps for analog support, so users would see garbage video, and on the DVB/ATSC side scanning is likely to work but if the user tried to tune it would certainly appear to have failed. It's better to fail explicity up front and tell the user to plug into a USB 2.0 port, than to let the driver load and the user have weird problems with tuning and garbage video. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11922): tuner-xc2028: cleanup: better use tuner type definesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11918): tuner-xc2028: Fix offset frequencies for DVB @ 6MHzMauro Carvalho Chehab
Both ATSC and DVB @ 6MHz bandwidth require the same offset. While we're fixing it, let's cleanup the bandwidth setup to better reflect the fact that it is a function of the bandwidth. Thanks to Terry Wu <terrywu2009@gmail.com> for pointing this issue and to Andy Walls <awalls@radix.net> for an initial patch for this fix. Cc: Terry Wu <terrywu2009@gmail.com> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11917): Fix firmware load for DVB-T @ 6MHz bandwidth for xc3028/xc3028LMauro Carvalho Chehab
The only two countries that are known to use 6MHz bandwidth are Taiwan and Uruguay. Both use QAM subcarriers at OFTM. This patch fixes the firmware load for such countries, where the required firmware is the QAM one. This also confirms the previous tests where it was noticed that the 6MHz QAM firmware doesn't work for cable. So, this patch also removes support for DVB-C, instead of just printing a warning. Thanks to Terry Wu <terrywu2009@gmail.com> for pointing this issue and to Andy Walls <awalls@radix.net> for an initial patch for this fix. Cc: Terry Wu <terrywu2009@gmail.com> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11915): af9015: support for Genius TVGo DVB-T03Antti Palosaari
Add USB ID (0458:4012) for Genius TVGo DVB-T03. Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing. Tested-by: Petr Vodicka <vodicka.petr@email.cz> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11898): cx18: Perform 64 bit divide so it works for 32 bit systemsAndy Walls
Thanks to David Ward and Mike Krufky for reporting the problem and debugging this as an unresolved symbol due to a 64 bit divide on a 32 bit system. David Ward provided the content of this patch; Andy Walls only performed some cosmetic edits. Reported-by: David Ward <david.ward@gatech.edu> Signed-off-by: David Ward <david.ward@gatech.edu> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11896): em28xx: Fix for Slow Memory LeakRobert Krakora
Test Code: (Provided by Douglas) v4l-dvb/v4l2-apps/test/stress-buffer.c The audio DMA area was never being freed and would slowly leak over time as the v4l device was opened and closed by an application. Thanks again to Douglas for generating the test code to help locate memory leaks!!! Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11895): bt8xx: remove always false ifFilipe Rosset
Remove always false if over unsigned int variable Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 02:44:36 +0000