aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-06[MTD] [NAND] Avoid deadlock in erase callback; release chip lock first.David Woodhouse
When the erase callback performs some other action on the flash, it's highly likely to deadlock unless we actually release the chip lock before calling it. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-06[MTD] [NAND] Resume method for CAFÉ NAND controllerDavid Woodhouse
Originally from Marcelo; modified to put the original timing registers back instead of 0xFFFFFFFF. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-06[MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller.David Woodhouse
It was only the very early prototypes which made the mistake of using the same device ident for all three functions on the device -- don't bother trying to express that in the PCI match table, since the tools don't cope. We can check in the probe routine instead, just in case. Also remember to terminate the table. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-06Merge branch 'master' of ssh://git.infradead.org/srv/git/mtd-2.6David Woodhouse
2007-09-25[MTD] [NAND] s3c2410: fix arch movesBen Dooks
Fixup the includes which have been moved around when changing the s3c24xx arch support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-23[MTD] [OneNAND] fix numerous racesArtem Bityutskiy
This patch make the OneNAND driver much less racy. It fixes our "onenand_wait: read timeout!" heisenbugs. The reason of these bugs was that the driver did not lock the chip when accessing OTP, and it screwed up OneNAND state when the OTP was read while JFFS2 was doing FS checking. This patch also fixes other races I spotted: 1. BBT was not protected 2. Access to ecc_stats was not protected Now the chip is locked when BBT is accessed. To fix all of these I basically split all interface functions on 'function()' and 'function_nolock()' parts. I tested this patch on N800 hardware - it fixes our problems. But I tested a little different version because our OneNAND codebase is slightly out-of-date. But it should be OK. This patch also includes the prin fixes I posted before. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-23[MTD] map driver for NOR flash on the Intel Vermilion Range chipsetDavid Woodhouse
The Vermilion Range Expansion Bus supports four chip selects, each of which has 64MiB of address space. The 2nd BAR of the Expansion Bus PCI Device is a 256MiB memory region containing the address spaces for all four of the chip selects, with start addresses hardcoded on 64MiB boundaries. This map driver only supports NOR flash on chip select 0. The buswidth (either 8 bits or 16 bits) is determined by reading the Expansion Bus Timing and Control Register for Chip Select 0 (EXP_TIMING_CS0). Signed-off-by: Andy Lowe <alowe@mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-23[MTD] fix CFI point method for discontiguous mapsAndy Lowe
The CFI probe routine is capable of detecting flash banks consisting of identical chips mapped to physically discontiguous addresses. (One common way this can occur is if a flash bank is populated with chips of less capacity than the hardware was designed to support.) The CFI point() routine currently ignores any such gaps. This patch fixes the CFI point() routine so that it truncates any request that would span a gap. Signed-off-by: Andy Lowe <alowe@mvista.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-23[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driverTodd Poynor
Replace Lubbock and Mainstone board drivers with common PXA2xx driver, convert to platform driver (corresponding platform device changes merged to kernel.org for 2.6.15), add power management callbacks. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-09[MTD] Remove Momenco Ocelot NOR flash supportYoichi Yuasa
This patch has removed Momenco Ocelot support from MTD. Ocelot support has already removed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-06[MTD] [NAND] nandsim: avoid deadlocking FSArtem Bityutskiy
Make nandsim use GFP_NOFS when allocating memory, because it might be used by a file-system (e.g. UBIFS2) which means, if we are short of memory, we may deadlock. Indee, UBIFS is holding a lock, writes to the media, reaches this place in NANDsim, kmalloc does not find the requested amount of RAM, calls memory shrinker, which decides to writeback inodes, calls FS, and it deadlocks on the lock which is already being held. Below is the UBIFS backtrace which demonstrates that: [<c03717dc>] __mutex_lock_slowpath+0xc8/0x2e6 [<c0371a16>] mutex_lock+0x1c/0x1f [<f8b9d076>] reserve_space+0x3d/0xa9 [ubifs] [<f8b9d1bd>] make_one_reservation+0x2b/0x86 [ubifs] [<f8b9d3fc>] ubifs_jrn_write_block+0xda/0x12f [ubifs] [<f8b9ff3a>] ubifs_writepage+0x11d/0x1ec [ubifs] [<c015d6ab>] shrink_inactive_list+0x7fa/0x969 [<c015d8c8>] shrink_zone+0xae/0x10c [<c015e3b4>] try_to_free_pages+0x159/0x251 [<c015980a>] __alloc_pages+0x125/0x2f0 [<c016ff6a>] cache_alloc_refill+0x380/0x6ba [<c01703f3>] __kmalloc+0x14f/0x157 [<f885722a>] do_state_action+0xab7/0xc74 [nandsim] [<f885760c>] switch_state+0x225/0x402 [nandsim] [<f8857e7e>] ns_hwcontrol+0x3e2/0x620 [nandsim] [<f8862f53>] nand_command+0x2e/0x1a5 [nand] [<f8861ad8>] nand_write_page+0x4a/0x9a [nand] [<f88617b4>] nand_do_write_ops+0x1cf/0x343 [nand] [<f8861a70>] nand_write+0x88/0xa6 [nand] [<f8850b0e>] part_write+0x72/0x8b [mtd] [<f88e19c5>] ubi_io_write+0x189/0x29c [ubi] [<f88dfb98>] ubi_eba_write_leb+0xb6/0x699 [ubi] [<f88def93>] ubi_leb_write+0xe4/0xe9 [ubi] [<f8ba3b82>] ubifs_wbuf_write_nolock+0x333/0x4c9 [ubifs] [<f8b9d28c>] write_node+0x74/0x8e [ubifs] [<f8b9d422>] ubifs_jrn_write_block+0x100/0x12f [ubifs] [<f8b9ff3a>] ubifs_writepage+0x11d/0x1ec [ubifs] [<c0159e5b>] __writepage+0xb/0x26 [<c015a318>] write_cache_pages+0x203/0x2d9 [<c015a411>] generic_writepages+0x23/0x2d [<c015a452>] do_writepages+0x37/0x39 [<c018e24a>] __writeback_single_inode+0x96/0x399 [<c018e903>] sync_sb_inodes+0x1a3/0x274 [<c018ebf3>] writeback_inodes+0xa6/0xd8 [<c015a9dd>] background_writeout+0x86/0x9e [<c015ae9c>] pdflush+0xfb/0x1b6 [<c01387d7>] kthread+0x37/0x59 [<c0104dc3>] kernel_thread_helper+0x7/0x14 The deadlock is funny because it starts in pdflush/writeback, and comes back to writeback, then deadlocks. It seems we should look carefully for other places in UBI and MTD and use GFP_NOFS instead of GFP_KERNEL. Caught-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-09-06[MTD] [OneNAND] main read/write ops support for yaffs2Kyungmin Park
Now we can use yaffs2 on OneNAND Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-30[MTD] [OneNAND] Use mtd_oob_ops at oob functionsKyungmin Park
To enable the main read/write at oob ops Next time we will commit the main read/write support for yaffs2 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-29[MTD] [NAND] Driver for Olympus MAUSB-10 and Fujifilm DPC-R1 card readersJörn Engel
Unlike most stuff on the market the chip inside these two allows raw flash access and doesn't implement and FTL, leaving that functionality to the device driver. Raw flash access in a cheap USB cardreader! An MTD test device one can attach to a PC! What a deal! The command set of the chip is not documented, so information was obtained from the existing mass-storage driver (drivers/usb/storage/alauda.c), its documentation (http://alauda.sourceforge.net/wikka.php?wakka=BulkCommandReference), additional reverse engineering and comparison with a vendor driver for a related chip (http://www.ratocsystems.com/english/download/driver/linux/sma03u.html). Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-23Merge branch 'mtd-2.6.24' of ↵David Woodhouse
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
2007-08-23Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2007-08-22[MTD] Remove dead mapsKumar Gala
The tqm834x map Kconfig options depends on TQM834x which does not exist anywhere else in the kernel. The pq2fads map Kconfig/makefile support was removed a while ago but the actual file persisted. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22[MTD] 4xx: Don't build arch/ppc dependent drivers in arch/powerpcJosh Boyer
These drivers are specific to 4xx support in arch/ppc at the moment. Make sure they don't get built on arch/powerpc. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()Yoichi Yuasa
au1100fb_fb_blank() should come before au1100fb_setmode(). drivers/video/au1100fb.c: In function 'au1100fb_setmode': drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank' Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22newport_con warning fixAndrew Morton
drivers/video/console/newport_con.c: In function `newport_console_init': drivers/video/console/newport_con.c:743: warning: return makes integer from pointer without a cast Although one wonders whether that should have been -ENODEV... Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Check for PPC32 in imsttfbStephen Rothwell
This is the correct fix according to Paul Mackerras and allows an allyesconfig on PPC64 to build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22rtc-max6902 minor fixesDavid Brownell
Minor tweaks to rtc-max6902: make it hotplug correctly, and fix a few space-before-tab whitespace botches. This driver has no current in-tree users, so the hotplug fix changes the driver name. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22cfag12864b fixMiguel Ojeda
This one-liner patch fixes a bug in drivers/auxdisplay/cfag12864b.c At cfag12864b_init(), the driver tries to kalloc some memory in the variable cfag12864b_cache. Then, as usual, it checks if the call failed. However, it checks cfag12864b_buffer instead. This patch changes the "cfag12864b_buffer" to "cfag12864b_cache" so the correct variable is checked. Signed-off-by: Miguel Ojeda <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial: add pci ids for PA Semi PWRficient onchip uartsOlof Johansson
Add PCI IDs for the onchip UARTs on PA Semi PWRficient. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22md: correctly update sysfs when a raid1 is reshapedNeilBrown
When a raid1 array is reshaped (number of drives changed), the list of devices is compacted, so that slots for missing devices are filled with working devices from later slots. This requires the "rd%d" symlinks in sysfs to be updated. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22md: make sure a re-add after a restart honours bitmap when resyncingNeilBrown
Commit 1757128438d41670ded8bc3bc735325cc07dc8f9 was slightly bad. If an array has a write-intent bitmap, and you remove a drive, then readd it, only the changed parts should be resynced. However after the above commit, this only works if the array has not been shut down and restarted. This is because it sets 'fullsync' at little more often than it should. This patch is more careful. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22w1: fix w1_remove_master_device() searchingEvgeniy Polyakov
In case bus master driver provided bogus value as its private data, search can be incorrect. Problem found by Adrian Bunk. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22synclink_gt fix module referencePaul Fulghum
Get module reference on open() by generic HDLC to prevent module from unloading while interface is active. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22IPMI: fix warning in ipmi_si_intf.cMijo Safradin
trivial change: fix warning Signed-off-by: Mijo Safradin <safradin@de.ibm.com> Acked-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Introduce CONFIG_CHECK_SIGNATUREGeert Uytterhoeven
Introduce CONFIG_CHECK_SIGNATURE to control inclusion of check_signature() and avoid problems on platforms that don't have readb(). Let the few legacy (ISA || PCI || X86) drivers that need check_signature() select CONFIG_CHECK_SIGNATURE. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visibleGeert Uytterhoeven
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible drivers/char/keyboard.c: In function 'kbd_keycode': drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons' The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on m68k because it's hidden in the middle of a big #ifdef block. Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and include <linux/kbd_kern.h> where needed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22zorro: Make sysfs config attribute read-onlyGeert Uytterhoeven
zorro: Make the sysfs `config' attribute read-only, as you cannot write to it (there's no .write function neither). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22m68k: Fix a few hickups in drivers/scsi/KconfigGeert Uytterhoeven
m68k: Fix a few hickups in drivers/scsi/Kconfig Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22remove dead code in via-pmu68kJohannes Berg
When suspend is ever implemented for pmu68k it really should follow the generic pm_ops concept and not mirror the platform-specific /dev/pmu device with ioctls on it. Hence, this patch removes the unused code there; should the implementers need it they can look at via-pmu.c and/or the history of the file. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22correct name for rtc-m41t80David Brownell
The new rtc-m41t80 driver name doesn't match its module name, which prevents it from properly hotplugging. Since it's new, no platforms yet depend on that name ... so this patch fixes the driver name to match its module name, rather than going the other way around with a MODULE_ALIAS(). NOTE: This sort of bug is a new thing to watch out for with new-style I2C drivers; previously I2C couldn't hotplug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Add blacklisting capability to serial_pci to avoid misdetection of serial portsChristian Schmidt
The serial_pci driver tries to guess serial ports on unknown devices based on the PCI class (modem or serial). On certain softmodems (AC'97 modems) this can lead to the recognition of non-existing serial ports. This patch adds a blacklist of PCI IDs that are to be ignored by the driver. [akpm@linux-foundation.org: cleanups] Signed-off-by: Christian Schmidt <schmidt@digadd.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Yinghai Lu <yinghai.lu@sun.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Serial 8250: handle saving the clear-on-read bits from the LSR and MSRCorey Minyard
Reading the LSR clears the break, parity, frame error, and overrun bits in the 8250 chip, but these are not being saved in all places that read the LSR. Same goes for the MSR delta bits. Save the LSR bits off whenever the lsr is read so they can be handled later in the receive routine. Save the MSR bits to be handled in the modem status routine. Also, clear the stored bits and clear the interrupt registers before enabling interrupts, to avoid handling old values of the stored bits in the interrupt routines. [akpm@linux-foundation.org: clean up pre-existing code] Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Yinghai Lu <yinghai.lu@sun.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial_txx9: Fix modem control line handlingAtsushi Nemoto
This chip does not have modem control lines. Return TIOCM_CAR and TIOCM_DSR always on get_mctrl() and ajust some bits in termios cflag. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial: add support for ITE 887x chipsNiels de Vos
Add support for the it887x-chips (PCI) manufactured by ITE. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial: don't optimise away baud rate changes when BOTHER is usedDavid Woodhouse
The uart_set_termios() function will bail out early without bothering to touch the hardware, if it decides that nothing "relevant" has changed. Unfortunately, its idea of "relevant" doesn't include c_[io]speed. So if the baud rate bits are BOTHER and you just change the speed, the change gets optimised away. This patch makes it ignore the old Bfoo bits in c_cflag and just check whether c_ispeed and c_ospeed have changed. Those integers are always set appropriately for us by set_termios(). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22tpmdd maintainersKent Yoder
Fix up the maintainers info in the tpm drivers. Kylene will be out for some time, so copying the sourceforge list is the best way to get some attention. Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Add support for 1533 bridge to alim1535_wdt [WATCHDOG] Add a 00-INDEX file to Documentation/watchdog/ [WATCHDOG] Eurotechwdt.c - clean-up comments
2007-08-22Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA] irda_nl_get_mode: always results in failure [PPP]: Fix output buffer size in ppp_decompress_frame(). [IRDA]: Avoid a label defined but not used warning in irda_init() [IPV6]: Fix kernel panic while send SCTP data with IP fragments [SNAP]: Check packet length before reading [DCCP]: Allocation in atomic context
2007-08-22[S390] vmur: fix reference counting for vmur device structureMichael Holzheu
When a vmur device is removed due to a detach of the device, currently the ur device structure is freed. Unfortunately it can happen, that there is still a user of the device structure, when the character device is open during the detach process. To fix this, reference counting for the vmur structure is introduced. In addition to that, the online, offline, probe and remove functions are serialized now using a global mutex. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] vmur: fix diag14 exceptions with addresses > 2GB.Michael Holzheu
There are several s390 diagnose calls, which must be executed below the 2GB memory boundary. In order to enforce this, those diagnoses must be compiled into the kernel. Currently diag 14 can be called within the vmur kernel module from addresses above 2GB. This leads to specification exceptions. This patch moves diag10, diag14 and diag210 into the new diag.c file. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] qdio: Refresh buffer states for IQDIO Asynchronous output queueKlaus D. Wacker
Hipersocket Multicast queue works asynchronously. When sending buffers, the buffer state change may happen delayed. The tasklet for checking changes in the outbound queue excluded IQDIO async queues from this process. This created either a hang situation when the queue ran full, or presented a hang situation a interface close time. The tasklet processing is changed to include IQDIO async queues when requesting buffer state refresh. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] qdio: fix EQBS handling on CCQ96Klaus D. Wacker
QDIO returned from EQBS instruction in any case after return code CCQ=96 was issued regardless whether buffer states for at least one buffer were extracted or not. This caused FCP devices to hang when running under z/VM and having QIOASSASIST=ON and having high I/O rates. In order to fix this qdio return code processing of EQBS instruction after CCQ=96 is changed that buffers are returned and if no buffers where extracted the instruction is repeated at once. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] cio: change confusing message in cmf.Cornelia Huck
cmf currently prints a message that more than 4096 channels are not allowed in basic mode - however, this can only be enforced if cmf was a module (which is no longer possible). It makes much more sense to not check the specified number of channels and just print a message if the block for basic mode could not be allocated (which may happen for any number of specified channels). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] cio: dont forget to set last slot to NULL in ccw_uevent().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[MTD] mtdoops printk warning fixesAndrew Morton
drivers/mtd/mtdoops.c: In function 'mtdoops_inc_counter': drivers/mtd/mtdoops.c:109: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/mtd/mtdoops.c: In function 'mtdoops_console_sync': drivers/mtd/mtdoops.c:277: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' someone buy Dave an x86_64 box. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 23:02:31 +0000