aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-05-23mpc52xx_psc_spi: fix it for CONFIG_PPC_MERGEDomen Puncer
Fix mpc5200 PSC SPI driver to actually work for CONFIG_PPC_MERGE - s/mpc52xx/mpc5200/, as this was changed in device tree some time ago - fix spi id detection The move from 'ppc' to 'powerpc' didn't quite match the latest kernel.org code. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Dragos Carp <dragos.carp@toptica.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-24ide serverworks warning fixesAndrew Morton
gcc-4.3: drivers/ide/pci/serverworks.c: In function 'svwks_tune_chipset': drivers/ide/pci/serverworks.c:176: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:190: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:211: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:212: warning: overflow in implicit constant conversion Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24Match DMA blacklist entries between ide-dma.c and libata-core.cJunio C Hamano
There are a few entries in ata_device_blacklist[] in libata-core.c marked with HORKAGE_NODMA but are missing from drive_blacklist[] in ide-dma.c. This patch makes the lists in sync. Also remove a duplicated entry for "SanDisk SDP3B-64". Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24Add two missing chipsets to drivers/ide/ide-proc.cMika Kukkonen
Compiling with '-Wswitch-enum' I noticed following: CC drivers/ide/ide-proc.o drivers/ide/ide-proc.c: In function ‘proc_ide_read_imodel’: drivers/ide/ide-proc.c:54: warning: enumeration value ‘ide_etrax100’ not handled in switch drivers/ide/ide-proc.c:54: warning: enumeration value ‘ide_acorn’ not handled in switch How about the following patch? Signed-off-by: Mika Kukkonen <mikukkon@iki.fi> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24ide/pci/serverworks.c: Fix corruption/timeouts with MegaIDEAlan Cox
It turns out from customer reports to Red Hat and some PCI dumps that the MegaIDE in RAID mode doesn't provide the drive tuning data that the serverworks driver expects but sometimes does provide something that fools the code. For the RAID class case skip the oem setup and don't trust the BIOS data. We then tune from scratch and this sorts it out. (This has been confirmed on an afflicted IBM blade) [libata serverworks.c never trusts the BIOS in the first place so is accidentally immune] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24add the IDE device ID for ATI SB700Henry Su
Add the IDE device ID to atiixp_pci_tbl struct in atiixp.c for ATI SB700. From: Henry Su <henry.su@amd.com> Signed-off-by: Luugi Marsan <luugi.marsan@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits) USB: Add support for Olimex arm-usb-ocd JTAG interface serial port USB: Add support for Sierra Wireless Aircard 595U USB: ldusb bugfix USB: ftdi_sio: Add USB Product Id for OpenDCC USB: fix ratelimit call semantics USB: handle errors in power/level attribute USB: make the autosuspend workqueue thread freezable USB: Fix USB OHCI Subvendor for Toshiba Portege 4000 USB: usblp: Use correct DMA address in case of probe error USB: Fix debug output of ark3116 USB: Onetouch - switch to using input_dev->dev.parent USB: don't try to kzalloc 0 bytes USB: remove short initial timeout for device descriptor fetch USB: Deref URB after usbmon is done with it USB: Remove duplicate IDs from option card driver USB: auerswald: fix file release handler USB: fsl_usb2_udc: Fix UMTI_WIDE support and a compile warning USB: set the correct Interrupt interval in usb_bulk_msg USB: New device PID for ftdi_sio driver USB: remove unneeded WARN_ON ...
2007-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - SPI_CPHA mode bugfix Input: ads7846 - document that it handles tsc2046 too Input: input-polldev - add module info Input: ucb1x00-ts - remove commented out code Input: ucb1400_ts - use sched_setscheduler() Input: ALPS - force stream mode Input: iforce - minor clean-ups Input: iforce - fix force feedback not working Input: adbhid - do not access input_dev->private directly Input: logips2pp - add type 72 (PS/2 TrackMan Marble)
2007-05-22USB: Add support for Olimex arm-usb-ocd JTAG interface serial portTony Lindgren
This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Add support for Sierra Wireless Aircard 595UDanny Budik
This patch adds support for the newly released Aircard 595U EVDO modem to the Sierra Wireless driver (sierra.c) in kernel 2.6.21. I suspect that my mailer may be mangling patches so let me know and I'll try to resend it. From: Danny Budik <dbudik@ist-traffic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: ldusb bugfixOliver Neukum
This patch fixes a problem reported with consecutive reads in the ldusb driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: ftdi_sio: Add USB Product Id for OpenDCCGuido Scholz
USB product id registration for the OpenDCC (www.opendcc.de) model railway central unit. Applies to 2.6.21.1. Signed-off-by: Guido Scholz <guido.scholz@bayernline.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix ratelimit call semanticsAlan Stern
This patch (as910) fixes a ratelimit modification so that the original error-handling path will be followed even when the log-rate limitation kicks in. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: handle errors in power/level attributeAlan Stern
This patch (as906) improves the error handling for the USB power/level attribute file. If an error occurs, the original power-level settings will be restored. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: make the autosuspend workqueue thread freezableAlan Stern
This patch (as881b) makes the ksuspend_usb_wq workqueue freezable. We don't want a rogue workqueue thread running around, unexpectedly suspending or resuming USB devices in the middle of a system sleep transition. This fixes Bugzilla #8498. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Fix USB OHCI Subvendor for Toshiba Portege 4000Andrey Borzenkov
This fixes a bug in an OHCI quirk handler for Portege 4000; the Subvendor is 0x1179 (PCI_VENDOR_ID_TOSHIBA) not 0x102f (PCI_VENDOR_ID_TOSHIBA_2) bugid 8510 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:0004] Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at f7eff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: usblp: Use correct DMA address in case of probe errorPete Zaitcev
Looks like the error path had a copy-paste error. The normal exit path uses correct URB already. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Fix debug output of ark3116Jan Engelhardt
Fix debug output. Previously, it would output "0xFFFFFFB0" on 32-bit archs (and probably "0xFFFFFFFFFFFFFFB0" on 64-bits), because buf is taken as signed char, which is promoted to signed int, while %x always expects an unsigned int. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Onetouch - switch to using input_dev->dev.parentDmitry Torokhov
In preparation for struct class_device -> struct device input core conversion, switch to using input_dev->dev.parent when specifying device position in sysfs tree. Also, do not access input_dev->private directly, use helpers. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: don't try to kzalloc 0 bytesAlan Stern
This patch (as907) prevents us from trying to allocate 0 bytes when an interface has no endpoint descriptors. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: remove short initial timeout for device descriptor fetchAlan Stern
This patch (as905) removes a micro-optimization from the hub port initialization code. Previously we had been using a short timeout on the first attempt the read the device descriptor; now we will use the standard timeout length. It's not clear that the short timeout ever provided any benefit. And now we know of one case where it actually hurts: The device can't meet the short timeout and then it gets terminally confused. This fixes Bugzilla #8444. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Deref URB after usbmon is done with itPete Zaitcev
I haven't personally run across an oops because of this, but I feel safer with this fix in place. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Remove duplicate IDs from option card driverBen Collins
Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: auerswald: fix file release handlerAndrew Morton
If this down_interruptible() does fail due to signal_pending() then the state of the driver will get trashed in interesting ways, because userspace cannot and will not retry the close(). Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fsl_usb2_udc: Fix UMTI_WIDE support and a compile warningLi Yang
Change PORT_WIDTH bit for UMTI_WIDE mode and fix a compile warning introduced in last revision. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: set the correct Interrupt interval in usb_bulk_msgAlan Stern
This patch (as902) fixes a mistake I introduced into usb_bulk_msg(). usb_fill_int_urb() already does the bit-shifting calculation for high-speed Interrupt intervals; it shouldn't be done twice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
2007-05-22USB: New device PID for ftdi_sio driverNeil \"Superna\" ARMSTRONG
Hello, I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for usb2serial communication, here are the patches for handling Maxstream's modules. The VID & PID to use with the open-source driver are provided on the CD-ROM bundled with the modules. From: Neil Superna ARMSTRONG <superna@na-prod.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: remove unneeded WARN_ONAlan Stern
This patch (as883) removes an out-of-date WARN_ON from the main HCD endpoint-disable routine. The warning is triggered whenever an endpoint is disabled while the root hub is suspended. In the past that may not have been legal, but it definitely is legal now. Merely unbinding a USB driver will do it. Furthermore, I've never seen any occurrences of this warning that really did signal an actual bug or error condition. At this point it has outlived its purpose. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2007-05-22USB: more autosuspend timer stuffAlan Stern
This patch (as879) ties up some loose ends from an earlier patch. These are things I didn't think to include at the time but which clearly belonged there. If an autosuspend fails because driver activity races with the autosuspend call, restart the autosuspend timer. When a device is resumed by an external request, it counts as device activity and should update the last_busy time so that the next autoresume won't occur immediately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22EHCI: fix problem with BIOS handoffAlan Stern
This patch (as882) fixes a problem with the EHCI BIOS handoff. On my machine, the BIOS configures the controller and the handoff fails, leaving the controller configured. During resume-from-disk, this confuses ehci-hcd into thinking that the controller has not been tampered with. The problem is fixed by turning off the Configured Flag whenever a BIOS handoff is attempted, whether it succeeds or not. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: address FIXME in usbnet w.r.t drivers claiming multiple interfacesOliver Neukum
This fixes the issue of drivers claiming multiple interfaces. Operations are stopped as soon as an interface is suspend and resumed only as all interfaces have been resumed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: handle more rndis_host odditiesDavid Brownell
Workaround another device firmware bug, wherein CDC descriptors get placed in a wrong place never previously observed in the wild. Fix a bug where a seeming RNDIS device returns a bogus response during device initialization. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix more ftdi-elan/u132-hcd #include lossageDavid Brownell
Partial fix for bogosity in the ftdi-elan and u132-hcd drivers ... these have no business including with the internals of other drivers, much less doing so in a broken way!! A previous patch resolved one build fix, this resolves another... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22usb-storage: ignore Sitecom WL-117 USB-WLANMatthew Davidson
The Sitecom WL-117 is another "driverless" ZD1211 device where the virtual windows driver CD must be ejected before the WLAN device appears. zd1211rw takes care of the ejecting, but usb-storage must be told not to claim the device. From: Matthew Davidson <mj.davidson@gmail.com> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: remove useless check in mos7840 found by coverityOliver Neukum
this useless check should be removed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: fix omninet memory leak found by coverityOliver Neukum
the transfer of allocating the descriptor in attach and no longer in open was incomplete resulting in a memory leak coverity spotted. This fix is against the patch set you posted. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22Input: ads7846 - SPI_CPHA mode bugfixSemih Hazar
In commit [1] the SPI mode is set to 1, but it should be 0. As stated in the commit, ads784x samples the data on the rising edge. SPI mode 1 samples on the falling edge [2] though. The root cause of this is a bug in the omap_uwire code, which treats CPHA=1 incorrectly; so these two bugs cancel each other out on one of the main regression test platforms for this driver. [1] kernel.org GIT 7937e86a70235e1584486654687dc9908a11e00a [2] http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ads7846 - document that it handles tsc2046 tooDavid Brownell
The TSC2046 is an updated version of the ADS7846 ... mention that in the Kconfig helptext and driver source. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: input-polldev - add module infoEric Piel
This is required to load it as a module, as GPL-compatible license is necessary to use workqueues. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ucb1x00-ts - remove commented out codeDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ucb1400_ts - use sched_setscheduler()Satoru Takeuchi
Fix Philips UCB1400 driver to use sched_setscheduler() instead of setting the fields of task_struct directly. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ALPS - force stream modeDmitry Torokhov
ALPS appears to need SETSTREAM command after reset, otherwise it does not produce any data. Now that we do not request stream mode by default individual drivers need to take care of it. [Jason Riedy <ejr@cs.berkeley.edu> - fix oops] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: iforce - minor clean-upsJohann Deneux
Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: iforce - fix force feedback not workingJohann Deneux
Use an interrupt URB to send force-feedback data to the device instead of a bulk URB. This was broken since 2.6.18. Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-s3c2410: Fix build warning i2c-tiny-usb: Fix truncated adapter name i2c: Legacy i2c drivers shouldn't issue uevents
2007-05-22Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix dreamcast build for IRQ changes. sh: Fix clock multiplier on SH7722. sh: Wire up kdump crash kernel exec in die(). sh: sr.bl toggling around idle sleep. sh: disable genrtc support. fs: Kill sh dependency for binfmt_flat. sh: Disable psw support for R7785RP. sh: Fix page size alignment in __copy_user_page(). sh: Fix up various compile warnings for SE boards. sh: Wire up signalfd/timerfd/eventfd syscalls. sh: revert addition of page fault notifiers spelling fixes: arch/sh/ input: hp680_ts compile fixes. sh: landisk: Header cleanups. sh: landisk: rtc-rs5c313 support. sh: Kill off pmb slab cache destructor. sh: Fix up psw build rules for r7780rp. sh: Shut up compiler warnings in __do_page_fault().
2007-05-22V4L/DVB (5691): Ov7670: reset clkrc in rgb565 modeJonathan Corbet
A bug in the ov7670 sensor causes it to introduce noise unless the CLKRC register is rewritten *after* setting the image mode. Naturally, resetting CLKRC in this way will cause other modes to fail. So carefully poke the register only when indicated. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-22V4L/DVB (5690): Cafe_ccic: Properly power down the sensorJonathan Corbet
The proper method for powering down the sensor on OLPC systems has changed somewhat; in particular, the sensor must be powered down completely (rather than simply told to power down) or the associated "camera active" LED will stay on. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-22V4L/DVB (5680): Tuner-simple.c fix suport for SECAM with FI1216MFmatthieu castet
Allow to use SECAM-BG with the FI1216MF tuner. The selection is done with the secam=B module argument. The default behaviour should be the same as before. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-22V4L/DVB (5630): Dvb-core: Handle failures to create devicesSimon Arlott
dvb-core is not started early enough when device drivers that use dvb are compiled in so dvb_register_device fails (silently) since dvb_class is NULL, this runs dvb_init using subsys_initcall instead of module_init. dvb_register_device will now check the return value of class_device_create. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 21:59:29 +0000