aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-02-05s2io: Removed enabling of some of the unused interrupts.Sivakumar Subramani
Removed unused code in en_dis_able_nic_intrs(), TX_DMA_INTR, RX_DMA_INTR, TX_XGXS_INTR, MC_INTR Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05s2io: Fixes in updating skb->truesize and code cleanup.Sivakumar Subramani
1. Fix for updating skb->truesize properly. 2. Disable NAPI only if more than one ring configured in case of MSI/MSI-X interrupts. Previously we were disabling NAPI irrespective of number of rings when MSI/MSI-X interrupts were used. 3. Code cleanup. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05S2IO: Fixes for reset and link handling.Sivakumar Subramani
1. Fix for reset and link handling. 2. Allow for promiscuos mode and multicast state be maintained through ifconfig up and down. 3. Support to print adapter serial number. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05s2io: Making LRO and UFO as module loadable parameter.Sivakumar Subramani
This patch adds two load parameters napi and ufo. Previously NAPI was compilation option with these changes wan enable disable NAPI using load parameter. Also we are introducing ufo load parameter to enable/disable ufo feature Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05PC300too alternative WAN driverKrzysztof Halasa
The attached patch adds an alternative driver "pc300too" for PCI WAN cards PC300/RSV and PC300/X21 made by Cyclades Corp. (now Avocent Corp). Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - Add dual licensingDivy Le Ray
Dual licensing, needed for OFED 1.2 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - Add <linux/mutex.h>Divy Le Ray
Include <linux/mutex.h> in adapter.h Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - Remove BUG_ON from t3b_intr_napiDivy Le Ray
In some cases, SG_DATA_INTR won't clear on read and the following interrupt may cause us to assert because NAPI is already scheduled. Remove the assertion, NAPI can handle attempts to rearm it while it's already scheduled. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - white space to tabsDivy Le Ray
Use tabs in comments. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - Clean up HW init routineDivy Le Ray
Clean up the tp_config() routine. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - bogus status error stringDivy Le Ray
Remove a status error string from the pci-x context and add it where it belongs - the pci-e context. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - remove SW Tx credits coalescingDivy Le Ray
Remove tx credit coalescing done in SW. The HW is caring care of it already. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - bind qsets on multiport adapterDivy Le Ray
Inform FW about the queue set->interface mapping. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05cxgb3 - FW versioningDivy Le Ray
Clean up FW version checking. The supported FW version is now 3.1. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05git-netdev-all: chelsio fixAndrew Morton
Cc: "Sunil Naidu" <akula2.shark@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove one remaining "#define BCM_TSO 1"Adrian Bunk
Since it's no longer used, this "#define BCM_TSO 1" can now be removed. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05UCC Ether driver: kmalloc casting cleanupsAhmed S. Darwish
A kmalloc casting cleanup patch. Signed-off-by: Ahmed Darwish <darwish.07@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05sky2: handle network device allocation failureshemminger@linux-foundation.org
If alloc_etherdev() failed, then sky2_init_netdev will return NULL, and sky2_probe would end up returning 0 instead of -ENOMEM. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05sky2: software rx/tx statsshemminger@linux-foundation.org
Maintain packet statistics in software rather than hardware. This is slightly slower, but allows easier debugging of problems where packets are still being received by PHY but not being handled by hardware. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05sky2: version 1.11.1shemminger@linux-foundation.org
Version update to 1.11.1. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05PEGASUS: Fix typo in Corega products.YOSHIFUJI Hideaki / 吉藤英明
s/FEter/FEther/. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05ASIX: Add IO-DATA ETG-US2 Support.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: statistics optimizationAyaz Abdulla
This patch optimizes the data paths that can support hw counters. It removes the sw counted statistics. This is the last patch for the optimization set. Bumping up version of driver. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: statistics supportedAyaz Abdulla
This patch introduces hw statistics for older devices that supported it. It breaks up the counters supported into separate versions. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: tx max workAyaz Abdulla
This patch adds a limit to how much tx work can be done in each iteration of tx processing. If the max limit is reached, remaining tx completions will be handled by timer interrupt. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: irq data path optimizationAyaz Abdulla
This patch optimizes the irq data paths and cleans up the code. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: rx data path optimizationAyaz Abdulla
This patch optimizes the rx data paths and cleans up the code. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: tx data path optimizationAyaz Abdulla
This patch optimizes the tx data paths and cleans up the code (removes vlan from descr1/2 since only valid for desc3, changes to make code easier to read, etc). Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: tx limitingAyaz Abdulla
This patch optimizes the logic for tx limiting. It adds a flag to check on the completion side instead of recalculating the number of empty slots. Also, it removes the fields that were previous used for limiting since they have no value. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: optimized routinesAyaz Abdulla
This patch breaks up the routines into two versions, one for legacy descriptor versions (ver 1 and ver 2) and one for desc ver 3. This will make the new desc functions more leaner and further reductions will be made in next few patches. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05bonding: update versionJay Vosburgh
Update version number to reflect recent changes. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05bonding: modify sysfs support to permit multiple loadsJay Vosburgh
The existing code would blindly attempt to create the bonding_masters file (in /sys/class/net) every time the module was loaded. When the module is loaded multiple times (which is the historical method used by initscripts and sysconfig to create multiple bonding interfaces), this caused load failure of the second module load attempt, as the creation request would fail. This changes the code to note the failure, arrange to not remove the bonding_masters file upon module exit, and then return success. Bonding interfaces created by the second or subsequent loads of the module will not exist in bonding_masters. This is not a significant change, as previously only the interfaces from the most recent load of the module would be listed. Both situations are less than optimal, but this case permits compatibility with existing distro configuration scripts, and is consistent. Note that previously, the sysfs create request would overwrite the exsting bonding_masters file and succeed, allowing multiple loads of the module. The sysfs code has recently changed to return an error if the file being created already exists. Patrick McHardy <kaber@trash.net>, who reported this problem, observed crashes on the old kernel (before sysfs checked for duplicates). I did not experience such crashes, but this change should resolve them. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05bonding: fix error check in sysfs creationJay Vosburgh
The existing code did not correctly handle failures to create the per-interface sysfs group for bonding. Modified code to notice errors, and correctly unwind. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05bonding: fix device name allocation errorJay Vosburgh
The code to select names for the bonding interfaces was, for the non-sysfs creation case, always using a hard-coded set of bond0, bond1, etc, up to max_bonds. This caused conflicts for the second or subsequent loads of the module. Changed the code to obtain device names from dev_alloc_name(). Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05net: use bitrev8Akinobu Mita
Use bitrev8 for bmac, mace, macmace, macsonic, and skfp drivers. [akpm@osdl.org: use the API, not the array] Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mirko Lindner <mlindner@syskonnect.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05bonding.h: "extern inline" -> "static inline"Adrian Bunk
"extern inline" generates a warning with -Wmissing-prototypes and I'm currently working on getting the kernel cleaned up for adding this to the CFLAGS since it will help us to avoid a nasty class of runtime errors. If there are places that really need a forced inline, __always_inline would be the correct solution. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05qla3xxx: Add support for Qlogic 4032 chip.Ron Mercer
Qlogic 4032 chip is an incremental change from the 4022. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove the broken OAKNET driverAdrian Bunk
The OAKNET driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05chelsio: more rx speedupStephen Hemminger
Cleanup receive processing some more: * do the reserve padding of skb during setup * don't pass constants to get_packet * do smart prefetch of skb * make copybreak a module parameter Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05chelsio: NAPI speed improvementStephen Hemminger
Speedup and cleanup the receive processing by eliminating the mmio read and a lock round trip. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05Add support for the latest 1G/10G Chelsio adapter, T3.Divy Le Ray
This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05make hdlc_setup() static againAdrian Bunk
hdlc_setup was exported, but this export was never used. If a driver using it actually shows up it can still be exported again. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: rx skb recycleAyaz Abdulla
This patch removes the code that recycled the skb on error. This will help in reducing the branches in the main data paths. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: tx lockingAyaz Abdulla
This patch reduces the amount of code within the lock to only the critical sections. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: ring accessAyaz Abdulla
This patch modifys ring access by using pointers. This avoids computing the current index and avoids accessing the base address of the rings. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05forcedeth: dma accessAyaz Abdulla
This patch allows the hardware to fetch the tx and rx ring descriptors with 64 bytes per access instead of 32 bytes. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove the broken SKMC driverAdrian Bunk
The SKMC driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05driver for Silan SC92031 netdevCesar Eduardo Barros
This is a driver for the Silan SC92031/Rsltek 8139D NIC chip. This chip is found on at least one counterfeit Encore ENL832-TX-RENT NIC [1], which came with a mini-CD with the 2.4 driver. A slightly older version of the driver was found at [2]. The main difference between them is that the newer one has a small bugfix in the RX path, a lot of gratuitous renaming of functions, all the printable strings changed to show as a "Rsltek 8139D" [sic], and a PCI ID of 8139 instead of 2031. The driver on this patch is a rewrite of the vendor drivers (based mostly on the older one). Changes from the previous patch sent to netdev: - Use MMIO instead of PIO - Changed TX bounce buffers allocation - Use skb_copy_and_csum_dev - Several small bug fixes - Tested for more than just a few minutes each time [1] See http://www.encore-usa.com/faq.php under ENL832-TX-RENT for more information [2] Look for SL_LINUX.ZIP (which is really a .tar.gz) at http://broadbandforum.in/dataone_Intex_LAN_cardlinux-t4207-s15.html [3] To compile on 2.6.17, simply add back the last argument to the interrupt handler in two places, and copy the boolean declarations from 2.6.19 [akpm@osdl.org: build fixes] Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05sky2: better power state managementStephen Hemminger
Improve power management and error handling by using pci_set_power_state(), instead of driver doing PCI PM register changes in the driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05remove NETIF_F_TSO ifdeferyArjan van de Ven
Remove the NETIF_F_TSO #ifdef-ery in drivers/net; this was for old-old-2.4 compat (even current 2.4 has NETIF_F_TSO) but it's time to get rid of it by now. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 03:13:58 +0000