aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-02-26libertas: fix misuse of netdev_priv() and dev->ml_privKiran Divekar
The mesh and radiotap interfaces need to use the same private data as the main wifi interface. If the main wifi interface uses netdev_priv(), but the other interfaces ->ml_priv, there's no way to figure out where the private data actually is in the WEXT handlers and netdevice callbacks. So make everything use ->ml_priv. Fixes botched netdev_priv() conversion introduced by "netdevice libertas: Fix directly reference of netdev->priv", though admittedly libertas' use of ->priv was somewhat "special". Signed-off-by: Kiran Divekar <dkiran@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-02-24asix: new device idsGreg Kroah-Hartman
This patch adds two new device ids to the asix driver. One comes directly from the asix driver on their web site, the other was reported by Armani Liao as needed for the MSI X320 to get the driver to work properly for it. Reported-by: Armani Liao <aliao@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-02-24netxen: handle pci bar 0 mapping failureDhananjay Phadke
PCI bar 0 is used for memory mapped register access. If ioremap fails (returns NULL), register access results in crash. Use pci_ioremap_bar() instead of ioremap(), the latter fails on on 32 bit powerpc where pci resource address is > 32 bits. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24netxen: fix physical port mappingDhananjay Phadke
The PCI function to physical port mapping is valid only for old firmware. New firmware (4.0.0+) abstracts this. So driver should never try to access phy using invalid mapping. The behavior is unpredictable when PCI functions 4-7 are enabled on the same NIC. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-23i915: suspend/resume interrupt stateJesse Barnes
In the KMS case, enter/leavevt won't fix up the interrupt handler for us, so we need to do it at suspend/resume time. Make sure we don't fail the resume if the chip is hung either. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-23Fix an oops in i915_gem_retire_requests()Karsten Wiese
dev_priv->hw_status_page can be NULL, if i915_gem_retire_requests() is called from i915_gem_busy_ioctl(). Signed-off-by Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: fix double free at netns creation veth : add the set_mac_address capability sunlance: Beyond ARRAY_SIZE of ib->btx_ring sungem: another error printed one too early ISDN: fix sc/shmem printk format warning SMSC: timeout reaches -1 smsc9420: handle magic field of ethtool_eeprom sundance: missing parentheses? smsc9420: fix another postfixed timeout wimax/i2400m: driver loads firmware v1.4 instead of v1.3 vlan: Update skb->mac_header in __vlan_put_tag(). cxgb3: Add support for PCI ID 0x35. tcp: remove obsoleted comment about different passes TG3: &&/|| confusion ATM: misplaced parentheses? net/mv643xx: don't disable the mib timer too early and lock properly net/mv643xx: use GFP_ATOMIC while atomic atl1c: Atheros L1C Gigabit Ethernet driver net: Kill skb_truesize_check(), it only catches false-positives. net: forcedeth: Fix wake-on-lan regression
2009-02-23rtl8187: New USB ID's for RTL8187LLarry Finger
Add new USB ID codes. These come from two postings on forums and mailing lists, and four are derived from the .inf that accompanies the latest Realtek Windows driver for the RTL8187L. Thanks to Viktor Ilijašić <viktor.ilijasic@gmail.com> and Xose Vazquez Perez <xose.vazquez@gmail.com> for reporting these new ID's. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-23ath9k: Fix panic upon attach failureVasanthakumar Thiagarajan
[246916.338046] [246916.338048] Pid: 29265, comm: insmod Not tainted (2.6.29-rc4-wl #64) 9461DUU [246916.338051] EIP: 0060:[<c02ca274>] EFLAGS: 00010202 CPU: 0 [246916.338055] EIP is at rollback_registered+0x24/0x220 [246916.338057] EAX: 00000001 EBX: 00000000 ECX: 00000000 EDX: f122e8fc [246916.338059] ESI: 00000000 EDI: 00000000 EBP: f6595d30 ESP: f6595d1c [246916.338062] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [246916.338064] Process insmod (pid: 29265, ti=f6594000 task=f7343fe0 task.ti=f6594000) [246916.338067] Stack: [246916.338068] c04a2920 22222222 f6595d48 00000000 f122f080 f6595d48 c02ca489 f122e8fc [246916.338076] f122e220 f122f080 f122e220 f6595d5c f8a03156 f122e220 f122f080 f122e220 [246916.338085] f6595d80 f87359af f122f080 00002000 f874e129 f122f150 f122f080 f6290000 [246916.338094] Call Trace: [246916.338096] [<c02ca489>] ? unregister_netdevice+0x19/0x70 [246916.338100] [<f8a03156>] ? ieee80211_unregister_hw+0x36/0xd0 [mac80211] [246916.338112] [<f87359af>] ? ath_detach+0xcf/0x250 [ath9k] [246916.338127] [<f8735d9c>] ? ath_attach+0x26c/0x740 [ath9k] [246916.338139] [<f873c33a>] ? ath_pci_probe+0x13a/0x310 [ath9k] [246916.338151] [<c0233e28>] ? _raw_spin_unlock+0x68/0x80 [246916.338158] [<c023ab8e>] ? local_pci_probe+0xe/0x10 [246916.338162] [<c023b8e0>] ? pci_device_probe+0x60/0x80 [246916.338169] [<c029e042>] ? driver_probe_device+0x82/0x1b0 [246916.338174] [<c029e1f9>] ? __driver_attach+0x89/0x90 [246916.338180] [<c029d97b>] ? bus_for_each_dev+0x4b/0x70 [246916.338184] [<c023b820>] ? pci_device_remove+0x0/0x40 [246916.338190] [<c029ded9>] ? driver_attach+0x19/0x20 [246916.338193] [<c029e170>] ? __driver_attach+0x0/0x90 [246916.338197] [<c029d317>] ? bus_add_driver+0x1b7/0x230 [246916.338203] [<c023b820>] ? pci_device_remove+0x0/0x40 [246916.338206] [<c029e399>] ? driver_register+0x69/0x140 [246916.338212] [<f859d000>] ? ath9k_init+0x0/0x54 [ath9k] [246916.338221] [<c023bb4e>] ? __pci_register_driver+0x4e/0x90 [246916.338225] [<f859d000>] ? ath9k_init+0x0/0x54 [ath9k] [246916.338232] [<f859d06b>] ? ath_pci_init+0x17/0x19 [ath9k] [246916.338238] [<f859d017>] ? ath9k_init+0x17/0x54 [ath9k] [246916.338245] [<c017148e>] ? tracepoint_update_probe_range+0x7e/0xb0 [246916.338249] [<c010111a>] ? do_one_initcall+0x2a/0x170 [246916.338252] [<c0149f26>] ? up_read+0x16/0x30 [246916.338256] [<c014aa9d>] ? __blocking_notifier_call_chain+0x4d/0x60 [246916.338265] [<c0162b1a>] ? sys_init_module+0x8a/0x1c0 [246916.338269] [<c022f888>] ? trace_hardirqs_on_thunk+0xc/0x10 [246916.338272] [<c0103ebf>] ? sysenter_do_call+0x12/0x43 [246916.338276] Code: 8d bc 27 00 00 00 00 55 89 e5 56 89 c6 53 83 ec 0c a1 74 27 4a c0 85 c0 0f 85 4b 01 00 00 e8 04 7d 00 00 85 c0 0f 84 c9 01 00 00 <8b> 86 18 03 00 00 85 c0 0f 84 86 01 00 00 83 e8 01 0f 85 71 01 [246916.338328] EIP: [<c02ca274>] rollback_registered+0x24/0x220 SS:ESP 0068:f6595d1c [246916.338335] ---[ end trace 76357c56a75ea34e ]--- Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-23orinoco: do not resgister NULL pm_notifier functionAndrey Borzenkov
With DEBUG_NOTIFIERS it results in [11330.890966] WARNING: at /home/bor/src/linux-git/kernel/notifier.c:88 notifier_call_chain+0x91/0xa0() [11330.890977] Hardware name: PORTEGE 4000 [11330.890983] Invalid notifier called! ... Without DEBUG_NOTIFIERS it most likely crashes on NULL pointer. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-23drm/i915: Add missing mutex_lock(&dev->struct_mutex)Pierre Willenbrock
there might be a nicer way to fix this but this is the simplest for now. Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: fix WC mapping in non-GEM i915 code.Jesse Barnes
[airlied - taken from mailing list posting] Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Fix regression in 95ca9dChris Wilson
The object is dereferenced before the NULL check. Oops. Fixes http://bugs.freedesktop.org/show_bug.cgi?id=20235 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Retire requests from i915_gem_busy_ioctl.Eric Anholt
This ensures that the user gets the latest information from the hardware on whether the buffer is busy, potentially reducing the working set of objects that the user chooses. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: suspend/resume GEM when KMS is activeJesse Barnes
In the KMS case, we need to suspend/resume GEM as well. So on suspend, make sure we idle GEM and stop any new rendering from coming in, and on resume, re-init the framebuffer and clear the suspended flag. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Don't let a device flush to prepare buffers clear new write_domains.Eric Anholt
The problem was that object_set_to_gpu_domain would set the new write_domains that are getting set by this batchbuffer, then the accumulated flushes required for all the objects in preparation for this batchbuffer were posted, and the brand new write domain would get cleared by the flush being posted. Instead, hang on to the new (or old if we're not changing it) value and set it after the flush is queued. Results from this noticably included conformance test failures from reads shortly after writes (where the new write domain had been lost and thus not flushed and waited on), but is a suspected cause of hangs in some apps when a write domain is lost on a buffer that gets reused for instruction or commmand state. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Cut two args to set_to_gpu_domain that confused this tricky path.Eric Anholt
While not strictly required, it helped while thinking about the following change. This change should be invariant. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-22PM: Split up sysdev_[suspend|resume] from device_power_[down|up], fixIngo Molnar
Impact: module build fix Fix: ERROR: "sysdev_resume" [arch/x86/kernel/apm.ko] undefined! ERROR: "sysdev_suspend" [arch/x86/kernel/apm.ko] undefined! As these APIs are now used by the APM driver, which can be built as a module. Also fix a few extra (and inconsistent) newlines in comment blocks preceding these functions. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: remove CONFIG_ACPI_SYSTEM fujitsu-laptop: Use RFKILL support bitmask from firmware x86_64: Fix S3 fail path x86_64: acpi/wakeup_64 cleanup battery: don't assume we are fully charged when not charging or discharging ACPI: EC: Add delay for slow MSI controller
2009-02-22m68k: atari - Rename "mfp" to "st_mfp"Geert Uytterhoeven
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22veth : add the set_mac_address capabilityDaniel Lezcano
Fix lost set_mac_address capability. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-21sunlance: Beyond ARRAY_SIZE of ib->btx_ringRoel Kluin
Do not go beyond ARRAY_SIZE of ib->btx_ring Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-21Merge branches 'release', 'bugzilla-12011', 'bugzilla-12632', 'misc' and ↵Len Brown
'suspend' into release
2009-02-21ACPI: remove CONFIG_ACPI_SYSTEMBjorn Helgaas
Remove CONFIG_ACPI_SYSTEM. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Some things under CONFIG_ACPI_SYSTEM (acpi_irq_handled, acpi_os_gpe_count(), event_is_open, register_acpi_notifier(), etc.) are used unconditionally by the CA, the OSPM, and drivers, so we depend on them always being present. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21fujitsu-laptop: Use RFKILL support bitmask from firmwareTony Vroon
Up until now, we polled the rfkill status for every incoming FUJ02E3 ACPI event. It turns out that the firmware has a bitmask which indicates what rfkill-related state it can report. The rfkill_supported bitmask is now used to avoid polling for rfkill at all in the notification handler if there is no support. Also, it is used in the platform device callbacks. As before we register all callbacks and report "unknown" if the firmware does not give us status updates for that particular bit. This was fed through checkpatch.pl and tested on the S6420, S7020 and P8010 platforms. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Stephen Gildea <stepheng+linux@gildea.com> Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21Merge branch 'hibernate'Linus Torvalds
* hibernate: PM: Fix suspend_console and resume_console to use only one semaphore PM: Wait for console in resume PM: Fix pm_notifiers during user mode hibernation swsusp: clean up shrink_all_zones() swsusp: dont fiddle with swappiness PM: fix build for CONFIG_PM unset PM/hibernate: fix "swap breaks after hibernation failures" PM/resume: wait for device probing to finish Consolidate driver_probe_done() loops into one place
2009-02-21Consolidate driver_probe_done() loops into one placeArjan van de Ven
there's a few places that currently loop over driver_probe_done(), and I'm about to add another one. This patch abstracts it into a helper to reduce duplication. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-21battery: don't assume we are fully charged when not charging or dischargingRichard Hughes
On hardware like the T61 it can take a couple of seconds for the battery to start charging after the power is connected, and we incorrectly tell userspace that we are fully charged, and then go back to charging. Only mark a battery as fully charged when the preset charge matches either the last full charge, or the design charge. http://bugzilla.kernel.org/show_bug.cgi?id=12632 Signed-off-by: Richard Hughes <hughsient@gmail.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21ACPI: EC: Add delay for slow MSI controllerAlexey Starikovskiy
http://bugzilla.kernel.org/show_bug.cgi?id=12011 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-20Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (26 commits) drm/radeon: update sarea copies of last_ variables on resume. drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap. drm/i915: take struct mutex around fb unref drm: Use spread spectrum when the bios tells us it's ok. drm: Collapse identical i8xx_clock() and i9xx_clock(). drm: Bring PLL limits in sync with DDX values. drm: Add locking around cursor gem operations. drm: Propagate failure from setting crtc base. drm: Check for a NULL encoder when reverting on error path drm/i915: Cleanup the hws on ringbuffer constrution failure. drm/i915: Don't add panel_fixed_mode to the probed modes list at LVDS init. drm: Release user fbs in drm_release drm/i915: Unpin the fb on error during construction. drm/i915: Unpin the hws if we fail to kmap. drm/i915: Unpin the ringbuffer if we fail to ioremap it. drm/i915: unpin for an invalid memory domain. drm/i915: Release and unlock on mmap_gtt error path. drm/i915: Set framebuffer alignment based upon the fence constraints. drm: Do not leak a new reference for flink() on an existing name drm/i915: Fix potential AB-BA deadlock in i915_gem_execbuffer() ...
2009-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Update version number to 8.03.00-k3. [SCSI] qla2xxx: Mask out 'reserved' bits while processing FLT regions. [SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion. [SCSI] qla2xxx: Properly acknowledge IDC notification messages. [SCSI] qla2xxx: Remove interrupt request bit check in the response processing path in multiq mode. [SCSI] lpfc: introduce missing kfree [SCSI] libiscsi: Fix scsi command timeout oops in iscsi_eh_timed_out [SCSI] qla2xxx: fix Kernel Panic with Qlogic 2472 Card. [SCSI] ibmvfc: Increase cancel timeout [SCSI] ibmvfc: Fix rport relogin [SCSI] ibmvfc: Fix command timeout errors [SCSI] sg: fix device number in blktrace data [SCSI] scsi_scan: add missing interim SDEV_DEL state if slave_alloc fails [SCSI] ibmvscsi: Correct DMA mapping leak
2009-02-208250: fix boot hang with serial console when using with Serial Over Lan portMauro Carvalho Chehab
Intel 8257x Ethernet boards have a feature called Serial Over Lan. This feature works by emulating a serial port, and it is detected by kernel as a normal 8250 port. However, this emulation is not perfect, as also noticed on changeset 7500b1f602aad75901774a67a687ee985d85893f. Before this patch, the kernel were trying to check if the serial TX is capable of work using IRQ's. This were done with a code similar this: serial_outp(up, UART_IER, UART_IER_THRI); lsr = serial_in(up, UART_LSR); iir = serial_in(up, UART_IIR); serial_outp(up, UART_IER, 0); if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) up->bugs |= UART_BUG_TXEN; This works fine for other 8250 ports, but, on 8250-emulated SoL port, the chip is a little lazy to down UART_IIR_NO_INT at UART_IIR register. Due to that, UART_BUG_TXEN is sometimes enabled. However, as TX IRQ keeps working, and the TX polling is now enabled, the driver miss-interprets the IRQ received later, hanging up the machine until a key is pressed at the serial console. This is the 6 version of this patch. Previous versions were trying to introduce a large enough delay between serial_outp and serial_in(up, UART_IIR), but not taking forever. However, the needed delay couldn't be safely determined. At the experimental tests, a delay of 1us solves most of the cases, but still hangs sometimes. Increasing the delay to 5us was better, but still doesn't solve. A very high delay of 50 ms seemed to work every time. However, poking around with delays and pray for it to be enough doesn't seem to be a good approach, even for a quirk. So, instead of playing with random large arbitrary delays, let's just disable UART_BUG_TXEN for all SoL ports. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20atyfb: remove unused local variable `pwr_command'Yang Hongyang
Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20sx.c: avoid referencing freed memory if copy_from_user() failsDan Carpenter
The "break" would just result in reusing a free'd pointer. I don't have the cards myself to test it though. :/ Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20sx.c: fix dbl statement if - add missing bracesIlpo Järvinen
Caused by 736d54533aed (sx.c: fix missed unlock_kernel() on error path in sx_fw_ioctl()). You guys keep breaking things this way in every single kernel release in at least couple of places... :-( Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20sungem: another error printed one too earlyroel kluin
Another error was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20ISDN: fix sc/shmem printk format warningRandy Dunlap
Fix isdn/sc/shmem.c printk format warning: drivers/isdn/sc/shmem.c:57: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20SMSC: timeout reaches -1Roel Kluin
With a postfix decrement timeouts will reach -1 rather than 0, so the error path does not appear. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20smsc9420: handle magic field of ethtool_eepromSteve Glendinning
ethtool.h says the driver should set the magic field in get_eeprom and verify it in set_eeprom. This patch adds this functionality using an arbitary driver-specific magic value constant (0x9420). Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20sundance: missing parentheses?Roel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20smsc9420: fix another postfixed timeoutSteve Glendinning
Roel Kluin recently fixed several instances where variables reach -1, but 0 is tested afterwards. This patch fixes another, so the timeout will be correctly detected and a warning printed. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20wimax/i2400m: driver loads firmware v1.4 instead of v1.3Inaky Perez-Gonzalez
This is a one liner change to have the driver use by default the v1.4 of the i2400m firmware instead of v1.3. The v1.4 version of the firmware has been submitted to David Woodhouse for inclusion in the linux-firmware tree and it is already available at http://linuxwimax.org/Download. The reason for this change is that the 1.3 release of the user space software and firmware has a few issues that will make it difficult to use with currently deployed commercial networks such as Xohm and Clearwire. As well, the new 1.4 release of the user space software (which matches the 1.4 firmware) has intermitent issues with the 1.3 firmware. The 1.4 release in http://linuxwimax.org/Download has been widely deployed and tested with the codebase in 2.6.29-rc, the 1.4 firmware and the 1.4 user space components. We understand it is quite late in the rc process for such a change, but would like to ask for the change to be taken into consideration. Alternatively, a user could always force feed a 1.4 firmware into a driver that doesn't have this modification by: $ cd /lib/firmware $ mv i2400m-fw-usb-1.3.sbcf i2400m-fw-usb-1.3.real.sbcf $ ln -sf i2400m-fw-usb-1.4.sbc i2400m-fw-usb-1.3.sbcf Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20drm/radeon: update sarea copies of last_ variables on resume.etienne
This fixes a regression reported in bug #12613. [airlied: not I tweaked the patch slightly and fixed it by etienne did all the hardwork so gets authorship] Signed-off-by: etienne <etienne.basset@numericable.fr> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap.Jesse Barnes
This fixes potential fault at fault time if the object was unreferenced while the mapping still existed. Now, while the mmap_offset only lives for the lifetime of the object, the object also stays alive while a vma exists that needs it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm/i915: take struct mutex around fb unrefJesse Barnes
Need to do this in case the unref ends up doing a free. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Use spread spectrum when the bios tells us it's ok.Kristian Høgsberg
Lifted from the DDX modesetting. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Collapse identical i8xx_clock() and i9xx_clock().Kristian Høgsberg
They used to be different. Now they're identical. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 21:11:04 +0000