aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-07-09[libata] Use ATA_UDMAx standard masks when filling driver's udma_mask infoJeff Garzik
The ATA_UDMAx masks are self-documenting, and far better than manually writing in the hex mask. Note that pata_it8213 mask differed from the comment. Added a FIXME there. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)Jeff Garzik
Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] Clean up driver udma_mask initializersJeff Garzik
* Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata: Support chips with 64K PRD quirkAlan Cox
Add ata_dumb_qc_prep and supporting logic so that a driver can just specify it needs to be helped in this area. 64K entries are split as with drivers/ide. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09Add a PCI ID for santa rosa's PATA controller.Christian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09sata_sil24: sil24_interrupt() micro-optimisationMikael Pettersson
sil24_interrupt() loads host->ports[i] into a local variable, validates it, and then loads the value again in the call to sil24_host_intr(). This patch replaces the second load by a reference to the local variable. This is safe since no side-effects have occurred since the initial load. It also improves readability since it makes it clear that the parameter to sil24_host_intr() is the same value which was just validated. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09Add irq_flags to struct pata_platform_infoSonic Zhang
On some embedded platforms, such as blackfin, the gpio interrupt for IDE interface is designed to be triggered with high voltage. The gpio port should be configured properly by set_irq_type() when register the irq. This patch enable the generic pata platform driver to accept platform irq flags data. Signed-off-by: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09sata_promise: cleanupsMikael Pettersson
This patch applies some trivial cleanups to sata_promise: - repair whitespace damage - correct comment at board_2057x_pata definition - pull SATAII TX4 support code out to separate functions - rename ata_nr to ata_no for consistency with libata's port_no - remove some init-time debug printks (requested by Jeff) This patch should cause no behavioural changes, except for the removed printks. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> -- drivers/ata/sata_promise.c | 56 ++++++++++++++++++--------------------------- 1 files changed, 23 insertions(+), 33 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] pata_ixp4xx: kill unused varJeff Garzik
Reported by Michael-Luke Jones. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09ata_piix: fix pio/mwdma programmingTejun Heo
Fix various bugs in pio/mwdma mode programming. * Control bits in the timing register wasn't cleared properly while programming PIO mode. * MWDMA mode programming cleared the wrong part of control bits. * MWDMA mode programming cleared udma_mask even when the controller doesn't support UDMA. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Art Haas <ahaas@airmail.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] ahci: minor internal cleanupsJeff Garzik
Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] sata_sx4, sata_via: minor documentation updatesJeff Garzik
sata_sx4: - describe overall driver theory of operation - add a few constants that will be used in the future sata_via: - remove mention of an old-EH function that is going away Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] ahci: minor internal cleanupsJeff Garzik
Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] ahci: Factor out SATA port init into a separate functionJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] pata_sil680: minor cleanups from benhJeff Garzik
Merge unrelated cleanups (__devinit, dev_dbg, hardware constant) from changeset "pata_sil680: Add MMIO support" authored by Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] sata_sx4: named constant cleanupJeff Garzik
* convert tabs to spaces * convert some hex numbers to (1 << n) preferred format * document i2c and timer control register bits Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] pata_ixp4xx: convert to new EHAlessandro Zummo
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] pdc_adma: Reorder initializers with a couple structsJeff Garzik
Make it easier to verify which struct initializers are present, by presenting them in the order in which they are defined in the API header. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] drivers: remove 'void __iomem *' casts from pre-iomap daysJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] PATA drivers: remove ATA_FLAG_SRSTJeff Garzik
This flag only has meaning in old-EH drivers, and these drivers have already been converted to the new EH. Remove. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] sata_sil: register table cleanupJeff Garzik
Make the register offset table more maintainable. From the 'sii-lbt' branch, which enables the LBT chip feature. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09use_clustering (sht) bit set to 0 in AHCI ?Jens Axboe
ahci: enable sg segment clustering The specification states that ahci supports segments up to 4MiB in size, so enable clustering. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata: replace ap->cbl tests with ATA_FLAG_SATA testsTejun Heo
ap->cbl == ATA_CBL_SATA indicates SATA cable while ap->flags & ATA_FLAG_SATA indicates SATA host port. Till now they always gave the same result but SATA/PATA bridge handling will change that. Switch to ATA_FLAG_SATA test if we're testing for host port type. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09[libata] pata_atiixp: add SB700 PCI IDJeff Garzik
From AMD. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: implement _GTM/_STM supportTejun Heo
Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: remove redundant checksTejun Heo
Remove remaining unnecessary feature and status checks. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata: reimplement ACPI invocationTejun Heo
This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: miscellaneous cleanupsTejun Heo
* Add missing LOCKING: and RETURNS: to function comment. * Don't conditionalize warning messages with ata_msg_probe(). Print directly with KERN_WARNING. * Drop duplicate debug messages. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: clean up ata_acpi_exec_tfs()Tejun Heo
This patch cleans up ata_acpi_exec_tfs() and its friends. * Rename taskfile_array to ata_acpi_gtf and make it __packed as it's used as argument to ACPI method, and use pointer to ata_acpi_gtf and number of taskfiles to represent _GTF taskfiles instead of a pointer casted into unsigned long and byte count. This makes argument re-checking in do_drive_set_taskfiles() unnecessary. * Pointer in void * not in unsigned long. * Clean up do_drive_get_GTF() error handling and make do_drive_get_GTF() return number of taskfiles on success, 0 if _GTF doesn't exist or doesn't contain valid ata. -errno on other errors. * Remove superflous check for acpi->buffer.pointer. * Update taskfile_load_raw() such that printed messages look similar to the messages printed by ata_eh_report(). * s/do_drive_get_GTF/ata_dev_get_GTF/ s/do_drive_set_taskfiles/ata_dev_set_taskfiles/ Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: implement ata_acpi_associate()Tejun Heo
* Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08qd65xx: fix PIO mode selectionBartlomiej Zolnierkiewicz
PIO4 is a maximum PIO mode supported by a driver. Using "255" as a max_mode argument to ide_get_best_pio_mode() could result in wrong timings being used by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2007-07-08sis5513: adding PCI-IDUwe Koziolek
The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-06potential compiler error, irqfunc caller sites updateYoann Padioleau
In 7d12e780e003f93433d49ce78cfedf4b4c52adc5 David Howells performed this evolution: "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers" He correctly updated many of the function definitions that were using this extra regs pointer parameter but forgot to update some caller sites of those functions. The reason the modifications was not properly done on all drivers is that some drivers were rarely compiled because they are for AMIGA, or that some code sites were inside #ifdefs where the option is not set or inside #if 0. Here is the semantic patch that found the occurences and fixed the problem. @ rule1 @ identifier fn; identifier irq, dev_id; typedef irqreturn_t; @@ static irqreturn_t fn(int irq, void *dev_id) { ... } @@ identifier rule1.fn; expression E1, E2, E3; @@ fn(E1, E2 - ,E3 ) Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issuesBjorn Helgaas
When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims the device is working, but it really isn't configured correctly. The BIOS *will* configure it, but only if we call _SRS after (1) reversing the order of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high to active-low. This patch addresses the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" I tested this on a Portege 4000. The smsc-ircc2 driver correctly detects the device, and "irattach irda0 -s && irdadump" shows transmitted and received packets. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document some of keycodes Input: add a new EV_SW SW_RADIO event, for radio switches on laptops Input: serio - take drv_mutex in serio_cleanup() Input: atkbd - use printk_ratelimit for spurious ACK messages Input: atkbd - throttle LED switching Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklist
2007-07-05Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Update defconfigs [POWERPC] Uninline and export virq_to_hw() for the pasemi_mac driver [POWERPC] Fix PMI breakage in cbe_cbufreq driver [POWERPC] Disable old EMAC driver in arch/powerpc
2007-07-04Remove the blink driverLinus Torvalds
Yeah, we could have just disabled it, but there's work on a new one that isn't as fundamentally broken, so there really doesn't seem to be any point in keeping it around. The recent timer cleanup broke the only valid use, and when I say "valid", I obviously mean "totally broken". So it's not like it works, or really even can work in the current format that uses the unsafe "panic" LED blinking routines.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-03Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: ide_scan_pcibus(): check __pci_register_driver return value ide: pdc202xx_new PLL input clock fix it821x: fix incorrect SWDMA mask amd74xx: resume fix hpt366: use correct enablebits for HPT36x hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66 ide: Fix a theoretical Ooops case ide: never called printk statement in ide-taskfile.c::wait_drive_not_busy
2007-07-03ide: ide_scan_pcibus(): check __pci_register_driver return valueAndrew Morton
drivers/ide/setup-pci.c: In function 'ide_scan_pcibus': drivers/ide/setup-pci.c:879: warning: ignoring return value of '__pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: pdc202xx_new PLL input clock fixAlbert Lee
Recently the PLL input clock of Promise 2027x is sometimes detected higher than expected (e.g. 20.027 MHz compared to 16.714 MHz). It seems sometimes the mdelay() function is not as precise as it used to be. Per Alan's advice, HT or power management might affect the precision of mdelay(). This patch calls gettimeofday() to measure the time elapsed and calculate the PLL input clock accordingly. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bahadir Balban <bahadir.balban@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03it821x: fix incorrect SWDMA maskBartlomiej Zolnierkiewicz
SWDMA modes are unsupported by it821x. Attempts to tune SWDMA modes always fail (due to sanity check in ->speedproc) and result in PIO being tuned. * Fix incorrect SWDMA mask so core code won't try these modes and will just tune PIO if no other DMA modes are available. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-03amd74xx: resume fixBartlomiej Zolnierkiewicz
* Driver can't skip programming transfer mode on the device in amd_set_drive() (similar fix has been applied to via82cxxx driver ages ago). * While at it remove redundant warning (ide_config_drive_speed() already produces more valuable one). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03hpt366: use correct enablebits for HPT36xSergei Shtylyov
The HPT36x chips finally turned out to have the channel enable bits -- however, badly implemented. Make use of them despite it's probably only going to burden the driver's code -- assuming both channels are always enabled by the HighPoint BIOS anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Cc: michal.kepien@poczta.onet.pl Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66Sergei Shtylyov
Add the MAXTOR STM3320620A drive into the UltraDMA/66 mode blacklist for the HPT36x chips. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: Fix a theoretical Ooops caseAlan Cox
Found by a static analyser. It is in theory possible we dereference dev->id when it has become invalid. Re-order to avoid this. Not needed for new-ide as we no longer support the crazy exabyte nest stuff Signed-off-by: Alan Cox <alan@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03ide: never called printk statement in ide-taskfile.c::wait_drive_not_busyMasatake YAMATO
Look at wait_drive_not_busy in drivers/ide/ide-taskfile.c: static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 100; u8 stat; /* * Last sector was transfered, wait until drive is ready. * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) udelay(10); if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } `printk' is never called because `retries' never holds zero at the outside of `while' loop: when `retries' holds zero at the while's loop condition, `retries' will hold -1 at the if condition. Signed-off-by: Masatake YAMATO <jet@gyve.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: joe@perches.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-03V4L/DVB (5822): Fix the return value in ttpci_budget_init()Hartmut Birr
if the call to budget_register() fails in ttpci_budget_int(), ttpci_budget_init() returns success. The attached patch will fix this problem. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03V4L/DVB (5818): CinergyT2: fix flush_workqueue() vs work->func() deadlockOleg Nesterov
Spotted and tested by Thomas Sattler <tsattler@gmx.de>. cinergyT2.c does cancel_delayed_work() + flush_scheduled_work() while holding cinergyt2->sem. This leads to deadlock because work->func() needs the same mutex to complete. Another bug is that this code in fact can't reliably stop the re-arming delayed_work. Convert this code to use cancel_rearming_delayed_work() and move it out of ->sem. Another mutex, ->wq_sem, was added to protect against the concurrent open/resume. This patch is a horrible hack to fix the lockup which happens in practice. As Dmitry Torokhov pointed out this driver has other problems and needs further changes. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03V4L/DVB (5816): Cx88-blackbird: fix vidioc_g_tuner never ending list of tunersJelle Foks
v4l-info and other programs would loop indefinitely while querying the tuners for cx88-blackbird cards. The cause was that vidioc_g_tuner didn't return an error value for qctrl->id != 0, making the application think there is a never ending list of tuners... This patch adds the same index check as done in vidioc_g_tuner() in cx88-video. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-03V4L/DVB (5808): Bttv: fix v4l1 breaking the driverTrent Piepho
If one uses a V4L *one* application, such as vlc or mplayer's v4l driver, as the first user after the driver is loaded, the driver wedges itself and will never capture properly. Even if one uses a V4L2 application later, it still won't work. If one uses a V4L *two* application first, such as tvtime or mplayer's v4l2 driver, then the driver will be ok. One can then run a V4L1 application, and it will work. It turns out the problem is with norm changing and the crop support that was added in 2.6.21. The driver defaults to PAL, and keeps the last norm it was set too across opens. If one changes the norm via V4L1, the cropping parameters are not reset like they should be, and they'll remain broken across device opens. This patch removes the direct setting of btv->tvnorm in the V4L1 ioctl VIDIOCSCHAN handler. The norm is set via the existing call to set_input(), which calls set_tvnorm(), which will reset the cropping values now that it is able to detect the norm change. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>