aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-04-30ts72xx NAND driverLennert Buytenhek
The TS-72xx is a series of embedded single board computers from Technologic Systems based on the Cirrus ep93xx (arm920t based) CPU. The TS-7200 uses NOR flash, while all the other models in the series (TS-7250, TS-7260) use NAND flash -- included is a driver for the NAND flash on those boards. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-29mtd: SC520CDP should depend on MTD_CONCATDaniel Drake
Toralf Förster found a compile error when CONFIG_MTD_SC520CDP=y and CONFIG_MTD_CONCAT=n: drivers/built-in.o: In function `init_sc520cdp': sc520cdp.c:(.init.text+0xb4de): undefined reference to `mtd_concat_create' drivers/built-in.o: In function `cleanup_sc520cdp': sc520cdp.c:(.exit.text+0x14bc): undefined reference to `mtd_concat_destroy' This patch fixes it. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-04-19mtd: improve parameter parsing for block2mtdJoern Engel
Expand the parameter parsing for block2mtd. It now accepts: Ki, Mi, Gi - the official prefixes for binary multiples, see http://physics.nist.gov/cuu/Units/binary.html, ki - mistake on my side and analog to "k" for decimal multiples, KiB, MiB, GiB - for people that prefer to add a "B" for byte, kiB - combination of the above. There were complaints about not accepting "k" for 1024. This has long been common practice, but is known to lead to confusion. Hence the new SI units and hence block2mtd only accepts units that cannot be confused with decimal units. Diverging from common practice doesn't always please people, even if the change is for the better. Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-04-18MTD: Correct Poodle partition sizeRichard Purdie
Correct the MTD NAND partition size for Poodle (Sharp Zaurus SL-5600) Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2006-04-17[PATCH] Remove unnecessary kmalloc/kfree calls in mtdcharThago Galesi
This patch removes repeated calls to kmalloc / kfree in mtd_write / mtd_read functions, replacing them by a single kmalloc / kfree pair. Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-17Remove unchecked MTD flagsJörn Engel
Several flags are set by some devices, but never checked. Remove them. Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-17Make mtdblock_ro unconditionally readonlyJörn Engel
mtdblock_ro is by definition readonly. Remove the silly checks. Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-17Simplify test for RAM devicesJörn Engel
mtdblock is the only user of aggregate capabilities in mtd. This is clearly bogus and should be changed. In particular, it tries to determine whether the device in question is a piece of RAM. For every single driver that fits the current criteria, an easier test would be to check for the type being MTD_RAM. Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-17Merge with git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
2006-04-14Fix AT91RM9200 build breakageDavid Brownell
The at91_cf driver got out of sync with certain changes in the PCMCIA layer, notably getting rid of some duplication of data ... causing the version merged to kernel.org to fail compiling. This patch gives the at91_cf platform device a new iomem resource, using it so this new pcmcia scheme works. It also cleans up some whitepsace bugs that have accumulated over time (mostly too-long lines). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-14[efficeon-agp] Add missing memory maskH. Peter Anvin
Original patch by Benjamin Herrenschmidt after debugging by Brian Hinz. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Hinz <bphinz@hotmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-14Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (170 commits) commit 3d9dd7564d5d7c28eb87b14c13a23806484667f3 Author: Zach Brown <zach.brown@oracle.com> Date: Fri Apr 14 16:04:18 2006 -0700 [PATCH] ip_output: account for fraggap when checking to add trailer_len During other work I noticed that ip_append_data() seemed to be forgetting to include the frag gap in its calculation of a fragment that consumes the rest of the payload. Herbert confirmed that this was a bug that snuck in during a previous rework. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 08d099974a09faf4cb11ffc46da87073fa132fc0 Author: Linus Walleij <triad@df.lth.se> Date: Fri Apr 14 16:03:33 2006 -0700 [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges ...
2006-04-14Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (679 commits) commit 7676f83aeb774e7a3abe6af06ec92b29488b5b79 Author: James Bottomley <James.Bottomley@steeleye.com> Date: Fri Apr 14 09:47:59 2006 -0500 [SCSI] scsi_transport_sas: don't scan a non-existent end device Any end device that can't support any of the scanning protocols shouldn't be scanned, so set its id to -1 to prevent scsi_scan_target() being called for it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> commit 3c0c25b97c7d020ef07f6366cf1d668a8e980c7c Author: Moore, Eric <Eric.Moore@lsil.com> Date: Thu Apr 13 16:08:17 2006 -0600 [SCSI] mptfusion - fix panic in mptsas_slave_configure Driver panic when RAID logical volume was present when driver loaded, or when a RAID logical volume was created on the fly. ...
2006-04-14Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (78 commits) commit e97b81ddbb8b8c72b85330ac4a454a4513dcba8a Author: Mark M. Hoffman <mhoffman@lightlink.com> Date: Thu Mar 23 16:50:25 2006 +0100 [PATCH] i2c-parport: Make type parameter mandatory This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> ...
2006-04-14Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (169 commits) commit 78a596b4490e17b9990d87b9d468ef5bb70daa10 Author: Adrian Bunk <bunk@stusta.de> Date: Fri Mar 31 01:38:12 2006 -0800 [PATCH] remove kernel/power/pm.c:pm_unregister() Since the last user is removed in -mm, we can now remove this long deprecated function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> commit 21440d313358043b0ce5e43b00ff3c9b35a8616c Author: David Brownell <david-b@pacbell.net> Date: Sat Apr 1 10:21:52 2006 -0800 [PATCH] dma doc updates ...
2006-04-14Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (158 commits) commit 4f705ae3e94ffaafe8d35f71ff4d5c499bb06814 Author: Bjorn Helgaas <bjorn.helgaas@hp.com> Date: Mon Apr 3 17:09:22 2006 -0700 [PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/ dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> ...
2006-04-14[IRDA]: smsc-ircc2, smcinit support for ALi ISA bridgesLinus Walleij
From: Linus Walleij <triad@df.lth.se> This patch enables support for ALi ISA bridges when we run the smcinit code. It is needed to properly configure some Toshiba laptops. Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-14[IRDA]: irda-usb, unregister netdev when patch upload failsSamuel Ortiz
In the STIR421x case, when the firmware upload fails, we need to unregister_netdev. Otherwise we hit a BUG on free_netdev(), if sysfs is enabled. Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-14[SCSI] scsi_transport_sas: don't scan a non-existent end deviceJames Bottomley
Any end device that can't support any of the scanning protocols shouldn't be scanned, so set its id to -1 to prevent scsi_scan_target() being called for it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[PATCH] PCI: Add PCI quirk for SMBus on the Asus A6VA notebookJean Delvare
The Asus A6VA notebook was reported to need a PCI quirk to unhide the SMBus. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] PCI: rpaphp: remove init error conditionJohn Rose
The init function for the RPA PCI Hotplug driver returns -ENODEV in the case that no hotplug-capable slots are detected in the system. This is bad, since hot-capable slots can be added after boot to a purely virtual POWER partition. This is also bad because DLPAR I/O operations depend on the rpaphp module. Change the rpaphp init module to return success for the case of partitions that own no hotplug-capable slots at boot. Such slots can be dynamically added after boot. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] pci_ids.h: correct naming of 1022:7450 (AMD 8131 Bridge)John W. Linville
The naming of the constant defined for PCI ID 1022:7450 does not seem to match the information at http://pciids.sourceforge.net/: http://pci-ids.ucw.cz/iii/?i=1022 There 1022:7450 is listed as "AMD-8131 PCI-X Bridge" while 1022:7451 is listed as "AMD-8131 PCI-X IOAPIC". Yet, the current definition for 0x7450 is PCI_DEVICE_ID_AMD_8131_APIC. It seems to me like that name should map to 0x7451, while a name like PCI_DEVICE_ID_AMD_8131_BRIDGE should map to 0x7450. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] PCI: MSI(X) save/restore for suspend/resumeShaohua Li
Add MSI(X) configure sapce save/restore in generic PCI helper. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/Bjorn Helgaas
dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] pm: print name of failed suspend functionAndrew Morton
Print more diagnostic info to help identify the source of power management suspend failures. Example: usb_hcd_pci_suspend(): pci_set_power_state+0x0/0x1af() returns -22 pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x11b() returns -22 suspend_device(): pci_device_suspend+0x0/0x34() returns -22 Work-in-progress. It needs lots more suspend_report_result() calls sprinkled everywhere. Cc: Patrick Mochel <mochel@digitalimplant.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] driver core: driver_bind attribute returns incorrect valueRyan Wilson
The manual driver <-> device binding attribute in sysfs doesn't return the correct value on failure or success of driver_probe_device. driver_probe_device returns 1 on success (the driver accepted the device) or 0 on probe failure (when the driver didn't accept the device but no real error occured). However, the attribute can't just return 0 or 1, it must return the number of bytes consumed from buf or an error value. Returning 0 indicates to userspace that nothing was written (even though the kernel has tried to do the bind/probe and failed). Returning 1 indicates that only one character was accepted in which case userspace will re-try the write with a partial string. A more correct version of driver_bind would return count (to indicate the entire string was consumed) when driver_probe_device returns 1 and -ENODEV when driver_probe_device returns 0. This patch makes that change. Signed-off-by: Ryan Wilson <hap9@epoch.ncsc.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] driver core: fix unnecessary NULL check in drivers/base/class.cJayachandran C
This patch tries to fix an issue in drivers/base/class.c, please review and apply if correct. Patch Description: "parent_class" is checked for NULL already, so removed the unnecessary check. Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] driver core: safely unbind drivers for devices not on a busAlan Stern
This patch (as667) changes the __device_release_driver() routine to prevent it from crashing when it runs across a device not on any bus. This seems logical, inasmuch as the corresponding bus_add_device() routine has an explicit check allowing it to accept such devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] sysfs: Allow sysfs attribute files to be pollableNeilBrown
It works like this: Open the file Read all the contents. Call poll requesting POLLERR or POLLPRI (so select/exceptfds works) When poll returns, close the file and go to top of loop. or lseek to start of file and go back to the 'read'. Events are signaled by an object manager calling sysfs_notify(kobj, dir, attr); If the dir is non-NULL, it is used to find a subdirectory which contains the attribute (presumably created by sysfs_create_group). This has a cost of one int per attribute, one wait_queuehead per kobject, one int per open file. The name "sysfs_notify" may be confused with the inotify functionality. Maybe it would be nice to support inotify for sysfs attributes as well? This patch also uses sysfs_notify to allow /sys/block/md*/md/sync_action to be pollable Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] i2c-parport: Make type parameter mandatoryMark M. Hoffman
This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] i2c-sis96x: Remove an init-time log messageMark M. Hoffman
This patch removes an init-time kernel log message. http://marc.theaimsgroup.com/?l=linux-kernel&m=114232987208628&w=3 Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] w83792d: Be quiet on misdetectionJean Delvare
Make the w83792d driver keep quiet when misdetecting a chip. This can happen, and the user doesn't need to know. Also renumber the messages, and add one, for consistency. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] i2c: convert m41t00 to use a workqueueMark A. Greer
The m41t00 i2c/rtc driver currently uses a tasklet to schedule interrupt-level writes to the rtc. This patch causes the driver to use a workqueue instead. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] i2c: convert ds1374 to use a workqueueJean Delvare
A tasklet is not suitable for what the ds1374 driver does: neither sleeping nor mutex operations are allowed in tasklets, and ds1374_set_tlet may do both. We can use a workqueue instead, where both sleeping and mutex operations are allowed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: add driver for funsoft usb serial deviceGreg Kroah-Hartman
Cc: David Clare <david@funsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: remove __init from usb_console_setupPaul Fulghum
This prevents an Oops if booted with "console=ttyUSB0" but without a USB-serial dongle, and plugged one in afterwards. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: pl2303: added support for OTi's DKU-5 clone cableTomasz Kazmierczak
This patch adds support for a clone of Nokia DKU-5 cable made by Ours Technology Inc for Nokia phones with PopPort (Nokia 3100 and others). The cable uses PL2303 USB-to-serial converter from Prolific Technology Inc. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: S3C2410: use clk_enable() to ensure 48MHz to OHCI coreBen Dooks
Get the "usb-bus" clock and ensure it is enabled when the OHCI core is in use. It seems that a few bootloaders do not enable the UPLL at startup, which stops the OHCI core having a 48MHz bus clock. The improvements to the clock framework for the s3c24xx now allow the USB PLL to be started and stopped when being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] hid-core.c: fix "input irq status -32 received" for Silvercrest USB ↵Jeffrey Vandenbroucke sign
Keyboard When not using this patch, the kernel will continuously return "input irq status -32 received", while making the keyboard unusable. This can be easely resolved using HID_QUIRK_NOGET. Vendor-ID and Device-ID should be applied to hid-core.c, and making an entry to make use of it. Signed-off-by: Jeffrey Vandenbroucke <jeffrey@wirehead.be> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UHCI: don't track suspended portsAlan Stern
Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: keyspan-remote bugfixMichael Downey
Signed-off-by: Michael Downey <downey@zymeta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: Rename ax8817x_func() to asix_func() and add utility functions ↵David Hollis
to reduce bloat Now that the ASIX code is supporting more than just the AX88172 devices, make the utility function names more generic: ax8817x_func -> asix_func. Functions that are chip specific now indicate as such: ax88772_func. Additionally, pull some common routines used in initialization and such into simple functions to reduce the verbosity of certain functions such as the bind() routines and to make the error handling consistent across the board. Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: linux/usb/net2280.h common definitionsPete Zaitcev
Move common definitions for NET2280 to <linux/usb/net2280.h>, so that I can use them in prism54usb (it is not merged yet, but I plan to do it soon). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: g_ether, highspeed conformance fixDavid Brownell
Be sure to record the peripheral's ep0 maxpacket size BEFORE using that to initialize the (high speed) device qualifier; that helps a lot with USBCV testing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: usbtest: scatterlist OUT data pattern testingDavid Brownell
Previously, scatterlist tests didn't write patterned data. Given how many corner cases are addresed by them, this was a significant gap in Linux-USB test coverage. Moreover, when peripherals checked for correct data patterns, false error reports would drown out the true ones. This adds the pattern on the way OUT from the host, so scatterlist tests can now be used to uncover bugs like host TX or peripheral RX paths failing for back-to-back short packets. It's easy enough to get an error there with at least one of the {DMA,PIO}{RX,TX} code paths, or run into hardware races that need to be defended against. Note this patch doesn't add checking for correct data patterns on the way IN from peripherals, just a FIXME for later. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: at91 usb driver supend/resume fixesDavid Brownell
AT91: the two USB drivers (OHCI, UDC) got out of sync with various usbcore and driver model PM updates; fix. Also minor fixes to ohci: whitespace/style, MODULE_ALIAS so coldplug works using /sys/.../modalias, and turn off _both_ clocks during suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: gadget zero poisons OUT buffersDavid Brownell
Fill OUT buffers with 0x55 before RX, so that controller driver bugs that mangle data can be more readily detected during testing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: gadgetfs highspeed bugfixDavid Brownell
This catches up to a change in the Kconfig support for highspeed modes; the change predated 2.6.10, and anyone using gadgetfs on a highspeed device would see the kernel wrongly reject the alternate descriptors. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: rndis_host whitespace/comment updatesDavid Brownell
This adds a "avoid proprietary protocols" warnoff, identifying several of the known deficiencies in Microsoft's excuse-for-specification, and fixes some whitespace bugs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: net2280 short rx status fixDavid Brownell
Some patch broke short-OUT packet handling for net2280, making it report illegal status values. This updates the status code so it's correct. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 02:11:44 +0000