aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-11-28rt2x00: Whitespace cleanup.Gertjan van Wingerde
Clean up the use of whitespace in the initialization of the rt2x00_ops structures. This is preparatory for a later patch that adds members to that structure, which require different whitespace alignment. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28rt2x00: Fix typo (lengt --> length) in rt2x00queue.cGertjan van Wingerde
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28rt2x00: Clean up use of rt2x00_intf_is_pci.Gertjan van Wingerde
RT chipsets are unique across both PCI and USB busses, and don't overlap. Therefore there is no need to test for bus type when only checking for chipset type. Remove the redundant checks. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28rt2x00: Remove unused variable frame_control from rt2x00mac_tx.Gertjan van Wingerde
As additional fallout also remove the also unused variable ieee80211hdr. Reported-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28rt2x00: Only initialize HT on rt2800 devices that support it.Gertjan van Wingerde
Some RT28xx/RT30xx devices don't support 802.11n, when they are combined with the RF2020 chipset. Ensure that HT is disabled for these devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Remove REF_CLK hackLuciano Coelho
This hack was totally wrong and was "needed" because of a problem in the way we were sending the GENERAL_PARMS command to the firmware. Now that that problem has been fixed, this hack can be removed. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: remove workaround to ignore -EIO from radio and general paramsLuciano Coelho
We were ignoring the -EIO return value from wl1271_cmd_radio_params() and wl1271_cmd_general_params(), because they were always returning an error and we didn't know why. Now this has been fixed, so the workaround can be removed. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: fix radio and general parameters commandsLuciano Coelho
We were missing the command header in the radio and general parameters commands. This was causing them to fail, resulting in problems in the power levels and other PLT-related commands. Also reorganized the command functions, moving from wl1271_init.c to wl1271_cmd.c where it fits better. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: set radio and general params also for PLTLuciano Coelho
We need to set the radio and general parameters when starting PLT mode. This patch adds calls to TEST_CMD_INI_RADIO_PARAMS and TEST_CMD_INIT_GENERAL_PARAMS when initializing PLT mode. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: fix the inetdev notifier callback return valuesLuciano Coelho
The wl1271_dev_notify() was returning 0 or -ENODEV, when it should return NOTIFY_* instead. Now we use NOTIFY_DONE when we didn't handle the event or NOTIFY_OK when we have handled it. For inetdev notifications, it doesn't matter whether we use NOTIFY_DONE or NOTIFY_OK, because it ignores the return value of the call to blocking_notifier_call_chain(). But the notify.h header says that NOTIFY_DONE is "Don't care" and NOTIFY_OK is "Suits me", so that seems to be the right way to do it. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Set PSM support flags in driver configurationJuuso Oikarinen
Set the PSM support flag in the device configuration for the mac80211 stack. This will enable usage of powersave. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Prevent PSM-entry retry loop if PSM cancelledJuuso Oikarinen
Prevent endless PSM-entry retry loops, if PSM has already been cancelled while PSM entry was attempted. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28wl1271: Decrease BET consecutive terminated beacons value to 10Juuso Oikarinen
Decrease the consecutive terminated beacons value for BET from 100 to 10. According to the vendor, 10 will give a more reliable connection and more reliable detection of connection problems. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: clean up rc rate tableFelix Fietkau
Remove some fields from struct ath_rate_table that are now unused. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28ath9k: properly use the mac80211 rate control apiFelix Fietkau
This patch changes ath9k to pass proper MCS indexes and flags between the RC and the rest of the driver code. sc->cur_rate_table remains, as it's used by the RC code internally, but the rest of the driver code no longer uses it, so a potential new RC for ath9k would not have to update it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-25ath9k: remove warnings related to signed/unsigned type mismatchJohn W. Linville
CC [M] drivers/net/wireless/ath/ath9k/recv.o drivers/net/wireless/ath/ath9k/recv.c: In function `ath_rx_prepare': drivers/net/wireless/ath/ath9k/recv.c:208: warning: comparison is always true due to limited range of data type drivers/net/wireless/ath/ath9k/recv.c:220: warning: comparison is always false due to limited range of data type Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-11-24sfc: Log interrupt and reset type names, not numbersBen Hutchings
Define name tables for these enumerations in a similar way as for loopback. Move the loopback name table together with them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Combine high-level header filesBen Hutchings
All files that include ethtool.h, rx.h or tx.h are also including efx.h, and there is no good reason to separate out the few declarations they contain. Therefore fold them into efx.h. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove redundant efx_xmit() functionBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove unnecessary casts to struct sk_buff *Ben Hutchings
At some point these casts were used to remove const qualification, but they are now unneeded. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Gather link state fields in struct efx_nic into new struct efx_link_stateBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move all I2C stuff into struct falcon_boardBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move struct falcon_board into struct falcon_nic_dataBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move definition of struct falcon_nic_data into falcon.hBen Hutchings
This is preparation for moving Falcon-specific state required by other Falcon-specific code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Make board information explicitly Falcon-specificBen Hutchings
Rename struct efx_board to struct falcon_board. Introduce and use inline function to look up board info from struct efx_nic, in preparation for moving it. Move board init and fini calls into NIC probe and remove functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Rename efx_board::init_leds to init_phy and use for SFN4111TBen Hutchings
efx_board::init_leds was introduced as a second stage of initialisation because of the inter-dependency between the board and PHY. We want to move board initialisation into NIC probing, which is too early to use MDIO, so SFN4111T initialisation also needs to be split. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Use a single blink implementationBen Hutchings
Only some PHYs have firmware support for a LED blink mode, so we currently blink the others in a timer function. Since all PHYs have simple on and off modes, we don't gain anything by using multiple blink implementations. Also, since we have a process context there is no need to use a timer. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: SFT9001: Reset LED configuration correctly after blinkingBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Record RX queue number on GRO pathBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move assertions and buffer cleanup earlier in efx_rx_packet_lro()Ben Hutchings
This removes the need to use a label and goto, and makes the two branches mirror each other more closely. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove ridiculously paranoid assertionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove redundant gotos from __efx_rx_packet()Ben Hutchings
This function no longer has any common cleanup code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove pointless abstraction of memory BAR number (2)Ben Hutchings
Finish the job by removing the structure member. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23ath9k: set ps_default as falseJohn W. Linville
Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 (This is for 2.6.33 and beyond, where the bool was changed to a flag by "cfg80211: convert bools into flags". -- JWL) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23ssb: Fix range check in sprom writeMichael Buesch
The range check in the sprom image parser hex2sprom() is broken. One sprom word is 4 hex characters. This fixes the check and also adds much better sanity checks to the code. We better make sure the image is OK by doing some sanity checks to avoid bricking the device by accident. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23ssb: Fix SPROM writingMichael Buesch
The SPROM writing routines were broken since we rewrote the suspend handling on wireless devices, because SPROM writing depended on suspend. This patch changes it and freezes devices with the driver remove(), probe() callbacks instead. This also simplifies the whole logics a lot. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23rndis_wlan: disable stall workaroundJussi Kivilinna
Stall workaround doesn't work with bcm4320a devices like with bcm4320b. This workaround actually causes more stalls/device freeze on bcm4320a. Therefore disable stall workaround by default. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23rndis_wlan: fix buffer overflow in rndis_query_oidJussi Kivilinna
rndis_query_oid overwrites *len which stores buffer size to return full size of received command and then uses *len with memcpy to fill buffer with command. Ofcourse memcpy should be done before replacing buffer size. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: remove reset led_tpt from iwl_leds_init()Wey-Yi Guy
Current blinking rate is calculated based on the difference between current tx/rx byte counts and priv->led_tpt. priv->led_tpt should not get reset in iwl_leds_init(), this function can be called by bring interface "up" or "down", or when uCode sysassert occurred. resetting the led_tpt parameter will introduce incorrect led blinking behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: change message for cmd queue full errorWey-Yi Guy
Change error message for command queue full Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: print limited number of event log when uCode errorWey-Yi Guy
To help iwlagn uCode debugging, event log will dump to syslog when driver detect uCode error occurred, but this only happen when compile with CONFIG_IWLWIFI_DEBUG and debug flag is enabled; which is not always the case. Also, there is another problem, if the flag is set, the entire event log buffer will be dump to syslog, it can flood the syslog and make it very difficult to debug the problem. Change the default to only dump last 20 entries of event log to syslog unless the following condition meets: 1. both compile with CONFIG_IWLWIFI_DEBUG and debug flag is enabled, and then dump the entire event buffer to syslog. 2. dump event log request from debugfs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: Tell the ucode immediately when association state changesJay Sternberg
When we get a state change of associated or not, we need to tell the ucode via the RX_ON command using the filter flags. This will prevent the ucode from sending any packets when not associated, specifically not sending NULL QOS packets after a deauthentication which causes the AP to repeatedly send deauth's in some situations. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: dump error log when uCode error occurredWey-Yi Guy
uCode error log contain information as to what the error was and where it occurred necessary to debug any uCode issues. Always log the information without special debug flag, this can help to capture the important information when error happened. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: by default, dump entire sram data portionWey-Yi Guy
For "sram" debugfs file, if user did not specify the offset and length, dump the entire data portion of sram by default. Data portion is 0x800000 - 0x80ffff, but the actual data size is known to the driver from the ucode file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: update supported PCI_ID list for 5xx0 seriesWey-Yi Guy
Update the PCI_ID list for 5xx0 series. Remove all the PCI_IDs which never made into production or not longer in production. Also make sure the supported bands(a/b/g/n) match specified PCI_IDs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: separate IO tracingJohannes Berg
Since IO tracing is usually not needed and generates a lot of data, separate it into its own trace system so that we can always enable iwlwifi:* and not have to worry about getting too much data. If IO tracing is then really needed we can enable iwlwifi_io:* in addition and get that data. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: fix reserved2 field in iwl4965_addstaWey-Yi Guy
reserved2 field in "struct iwl4965_addsta_cmd" is __le16. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: dynamically allocate buffer for sram debugfs fileWey-Yi Guy
Dynamically allocate memory for dumping SRAM based on the length of memory to be displayed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: increase tx_queue debugfs buffer sizeWey-Yi Guy
For tx_queue, need to increase the buffer size allocated for it, so all the queues information can be displayed Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 12:29:45 +0000