aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-09-13Fix up more strange byte writes to the PCI_ROM_ADDRESS config wordLinus Torvalds
It's a dword thing, and the value we write is a dword. Doing a byte write to it is nonsensical, and writes only the low byte, which only contains the enable bit. So we enable a nonsensical address (usually zero), which causes the controller no end of problems. Trivial fix, but nasty to find. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 Linus Torvalds
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Linus Torvalds
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Linus Torvalds
2005-09-12Merge master.kernel.org:/home/rmk/linux-2.6-arm Linus Torvalds
2005-09-12Merge master.kernel.org:/home/rmk/linux-2.6-mmc Linus Torvalds
2005-09-12[ARM SMP] Add MPCore watchdog driverRussell King
Add platform independent parts of the ARM MPCore watchdog driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-12[BNX2]: Add support for ETHTOOL_GPERMADDR.John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[TG3]: Add support for ETHTOOL_GPERMADDR.John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[TG3]: Do not count non-error frames dropped by the hardware as rx_errors.John W. Linville
Instead, count them as part of rx_missed_errors. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[AX.25]: Rename ax25_encapsulate to ax25_hard_headerRalf Baechle
Rename ax25_encapsulate to ax25_hard_header which these days more accurately describes what the function is supposed to do. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[HAMRADIO]: driver cleanupsRalf Baechle
Misc related cleanups in hamradio drivers: o Use symbolic constants instead of magic numbers o Don't try to handle the case where AX.25 isn't configured - the kernel configuration doesn't permit that. o Remove useless headers Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[SPARC] drivers/sbus: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 Linus Torvalds
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 Linus Torvalds
2005-09-12Merge ../torvalds-2.6/ Greg KH
2005-09-12[MMC] Clean up wbsd detection handlingPierre Ossman
The wbsd driver's card detection routing is a bit of a mess. This patch cleans up the routine and makes it a bit more comprihensible. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-12[MMC] Remove unused timer.Pierre Ossman
Remove timer that was left from earlier cleanup. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-12[PATCH] crc16: remove w1 specific comments.Evgeniy Polyakov
Remove w1 comments from crc16.h and move specific constants into w1_ds2433.c where they are used. Replace %d with %zd. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: ftdi_sio: custom baud rate fixIan Abbott
ftdi_sio: I messed up the baud_base for custom baud rate support in 2.6.13. The attached one-liner patch fixes it. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: Usbmon setup DMA patchPete Zaitcev
Alan Stern sent me this patch. It goes on top of the patch the adds mon_dmapeek: http://ftp.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb/usb-usbmon-dma-areas.patch Please be warned about ordering requirements or the build may fail. Actually, mon_dmapeek is generic enough to support SETUP packets too. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] usb: fix uss720 schedule with interrupts offThomas Sailer
This patch fixes the long standing schedule with interrupts off problem of the uss720 driver. The problem is caused by the parport layer calling the save and restore methods within a write_lock_irqsave guarded region. The fix is to issue the control transaction requests required by save and restore asynchronously. Signed-off-by: Thomas Sailer, <sailer@ife.ee.ethz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 playerDaniel Drake
Alan Stern wrote: > If the device sometimes reports the correct values, then you should > include NEED_OVERRIDE flag to prevent messages about unnecessary > overrides showing up in the system log. Also, if bInterfaceSubclass > is correct and only bInterfaceProtocol is wrong, then the entry should > say US_SC_DEVICE instead of US_SC_SCSI. Fair points, thanks. When connected over USB2, this device reports a nonsense bInterfaceProtocol value 6 and doesn't work with usb-storage. When connected over USB1, the device reports the correct bInterfaceProtocol value 0x50 (bulk) and works with no problems. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: storage: Add unusual_dev SINGLE_LUN entriesPhil Dibowitz
This patch adds entries for several USB floppies that need the US_FL_SINGLE_LUN flag. These were reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> and Olaf Hering <olh@suse.de>, with rediffing and cleaning from me. Reported-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Reported-by: Olaf Hering <olh@suse.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB Storage: unusual_devs.h request for TranscendPete Zaitcev
The stick replies to the door lock commands with a check condition (e.g. FAIL status in a normal bulk CSW), but the subsequent REQUEST SENSE returns all-zero sense. The situation is documented in our Bugzilla, including usbmon traces. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=162559 The error is purely cosmetic, data integrity is not in danger. But I thought we might as well do it. It looks nicer that way. I discussed this with Phil and he told me to submit directly. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: storage: Fix messed-up lockingMatthew Dharm
This is patch as550 from Alan Stern. Apparently someone changed the SCSI core so that it no longer holds the host lock when doing a device or bus reset. usb-storage was updated at the time, but the change was done carelessly. Some of the code depends on that lock being held. This patch reintroduces the host lock where needed and tries to clarify the comments explaining why the lock is necessary. It also moves the code that clears the TIMED_OUT and ABORTING bitflags so that it executes as soon as the timed-out command has completed (and while the host lock is held). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: relax usbcore reset timingsDavid Brownell
This appears to help some folk, please merge. This patch relaxes reset timings. There are some reports that it helps make enumeration work better on some high speed devices. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: PL2303: CA-42 Phone cableRobert Spanton
This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable to the list of devices handled by the pl2303 driver. The patch is against 2.6.13. Signed-off-by: Robert Spanton <rds204@zepler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI, pxa27x OHCI port power tweaksDavid Brownell
Now that it's in use on other boards, a bug in the original code needs fixing. There is no need for the PXA27x OHCI to set usb power during init, since the hub driver in usbcore handles that. Those platform-specific power control functions are also incorrect, and should therefore be removed. Add a check to clear the OTG pin hold bit until such times OTG is properly implemented. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI relies less on NDP registerDavid Brownell
Some OHCI implementations have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed (except for an AMD756 bug workaround). It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI irq tweakDavid Brownell
Evidently there are some boards which care a lot about this, but as a rule it's been hard to notice. OHCI_INTR_RD wasn't always cleared in the ohci irq handler. On some systems this means certain remote wakeup scenarios could seem to hang (in an interrupt storm, RD never clearing). From: "William Morrow" <William.Morrow@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB gadgetfs: fixes an error on writing to endpoint filePavol Kurina
this patch fixes an "Invalid argument" error returned by a write to an endpoint-file after reopening it in the gadgetfs module in the kernel 2.6.12. This was testet only with dummy_hcd module! Signed-off-by: Pavol Kurina <kurina@gmx.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2005-09-12[PATCH] drivers/usb: fix-up schedule_timeout() usageNishanth Aravamudan
Description: Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: get rid of minor log spammingDavid Brownell
Routine cases like handoff-to-companion shouldn't trigger diagnostics. This gets rid of some recently added log spamming. It's routine for hub_port_wait_reset() to return -ENOTCONN to indicate handoff from highspeed hubs to companions, so an error message is incorrect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: EHCI workaround for NForce and mem > 2GBDavid Brownell
NVidia reports (via Mark Overby) that some of their EHCI controllers don't like certain data structure addresses beyond the 2GB mark. He provided an earlier version of this patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: EHCI port tweaksDavid Brownell
One change may improve some S1 or S3 resume cases, and the other seems mostly to explain some strange state "lsusb" would show. Two fixes: - On resume, don't think about resuming any unpowered port, or resetting any port with OWNER set to the OHCI/UHCI companion. This will make some S1 and S3 resume scenarios work better. - PORT_CSC was not being cleared correctly in ehci_hub_status_data. This was visible at least through current versions of "lsusb", and might have caused some other hub related strangeness. The fix addresses all three write-to-clear bits, using the same approach that UHCI happens to use: a mask of bits that are cleared in most writes to that port status register. Original patch seems to have been from from William.Morrow@amd.com and this version (from David) finishes the write-to-clear changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: CP2101 New Device IDsCraig Shelley
Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB UHCI: remove the FSBR kernel timerAlan Stern
This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] usbcore: small changes to HCD glue layerAlan Stern
This patch (as549) introduces two small changes in the HCD glue layer. The first simply removes a redundant test. The second allows root-hub polling to continue for a single iteration after a host controller dies; this is needed for the patch that follows. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: add apple usb touchpad driverStelian Pop
This is a driver for the USB touchpad which can be found on post-February 2005 Apple PowerBooks. This driver is derived from Johannes Berg's appletrackpad driver [1], but it has been improved in some areas: * appletouch is a full kernel driver, no userspace program is necessary * appletouch can be interfaced with the synaptics X11 driver[2], in order to have touchpad acceleration, scrolling, two/three finger tap, etc. This driver has been tested by the readers of the 'debian-powerpc' mailing list for a few weeks now and I believe it is now ready for inclusion into the mainline kernel. Credits go to Johannes Berg for reverse-engineering the touchpad protocol, Frank Arnold for further improvements, and Alex Harper for some additional information about the inner workings of the touchpad sensors. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: sisusb[vga] updateThomas Winischhofer
here is a new and extended version of the sisusbvga (previously: sisusb) driver. The patch is against 2.6.13 and updates the driver to version 0.0.8. Additions include complete VGA/EGA text console support and a build-in display mode infrastructure for userland applications that don't know about the graphics internals. Fixes include some BE/LE issues and a get/put_dev bug in the previous version. Other changes include a change of the module name from "sisusb" to "sisusbvga". The previous one was too generic IMHO. Please note that the patch also affects the Makefile in drivers/video/console as the driver requires the VGA 8x16 font in case the text console part is selected. Heavily tested, as usual. Please apply. One thing though: I already prepared for removal of the "mode" field and the changed "name" field in the usb_class_driver structure. This will perhaps need some refinement depending on whether you/Linus merge the respective core changes before or after 2.6.14. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12Merge ../torvalds-2.6/ Greg KH
2005-09-12Revert "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new ↵Greg KH
G4 powerbooks" This reverts 22af8878d2d641c6b15fe39fe4de3c05b2c477f0 commit. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] crc16: remove w1 specific comments.Evgeniy Polyakov
Remove w1 comments from crc16.h and move specific constants into w1_ds2433.c where they are used. Replace %d with %zd. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[MMC] Remove trailing whitespace in wbsdPierre Ossman
Clean out trailing whitespace caused by not-so-great editor since it generates a lot of problems with editors configured to automatically strip whitespace. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[PATCH] i810fb: Change option ext_vga to extvga to match documentationAntonino A. Daplas
Reported by: Manuel Lauss <mano@roarinelk.homelinux.net> He was getting random initial video modes depending on the kernel configuration. His option line includes 'extvga'. The i810fb documentation describes the option 'extvga', however the driver accepts 'ext_vga'. Besides 'extvga' being ignored by i810fb, it also confuses the option parser of i810fb and assigns 'extvga' to 'mode_option'. This leads to an incorrect video mode at boot time. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] i810fb: Restore xres and yres option parametersAntonino A. Daplas
If i810fb successfully probed for the EDID, it will disregard the boot option parameters 'xres' and 'yres'. Fix this regression. Excellent testing done by Manuel Lauss <mano@roarinelk.homelinux.net>. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] i810fb: Fix oops if CONFIG_FB_I810_I2C is set to noAntonino A. Daplas
Reported by: Manuel Lauss <mano@roarinelk.homelinux.net> compiled with CONFIG_FB_I810_I2C = n and CONFIG_FB_I810 = y it oopses at boot in file drivers/video/i810/i810_main.c:1884 ... Unable to handle kernel NULL pointer dereference at virtual address 00000054 printing eip: c02543c0 *pde = 00000000 Oops: 0000 [#1] last sysfs file: Modules linked in: CPU: 0 EIP: 0060:[<c02543c0>] Not tainted VLI EFLAGS: 00010286 (2.6.13-mm2) EIP is at i810fb_find_init_mode+0x53/0x93 eax: c113ddd4 ebx: c1194000 ecx: c04be2dd edx: c1194000 esi: c1194008 edi: c113ddd4 ebp: c1194240 esp: c113ddcc ds: 007b es: 007b ss: 0068 struct fb_monspecs *specs is initialized to NULL causing the oops. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] m68knommu: FEC eth definitions support for the 523x Coldfire ↵Greg Ungerer
processor family Add support for the FEC ethernet driver of the Freescale 523x processor family to the FEC header definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] uclinux: remove use of mtd_put_device() in uclinux MTD map driverGreg Ungerer
We should not call mtd_put_device() in the uclinux MTD map driver. Also consistently use phys/virt fields of maps map_info struct, instead of mixing it with map_priv_1. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>