aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13303): gspca - sonixj: Change sensor and om6802 exchanges.Jean-Francois Moine
- the sensors are now initialized sooner - om6802: . set some parameters in factory mode . lack of some parameters . gpio adjustments Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13302): gspca - sonixj: Fix some bad values of sensor om6802.Jean-Francois Moine
- sensor address is 0x34 - sensor i2c is 100 kHz Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13301): gspca - sonixj: Simplify the sensor init exchanges.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13300): gspca - pac7302/pac7311: Separate the two subdrivers.Marton Nemeth
All PAC7311 specific functions remain in pac7311.c. All PAC7302 specific functions are moved to pac7302.c. The USB device table is also divided into two parts. This makes it possible to remove the sensor specific decisions from different functions and also remove sensor infromation from the USB device table. The common functions are just copied to both subdrivers. These common functions can be separated later to a common file or helper module. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13299): gspca - pac7311: Extract pac_start_frame.Marton Nemeth
Creating the start of the frame is done in the same way for pac7302 and for pac7311. Extract this common part to the pac_start_frame() function. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13298): gspca - pac207/pac7311/mr97310a: Simplify pac_find_sof.Marton Nemeth
Remove struct sd dependency from pac_find_sof() function implementation. This step prepares separation of pac7302 and pac7311 specific parts of struct sd. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13297): dib0700_devices: EvolutePC TvWay+ USB ISDB-Tb remote ↵Sergio C Fortier
control support Patch for EvolutePC TvWay+ USB ISDB-Tb remote control support. [dougsland@redhat.com: fixed malformed patch] Cc: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Sergio C Fortier <sergiofortier@yahoo.com.br> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13295): sms1xxx: load smsdvb also for the hauppauge tiger cardsÉric Piel
load smsdvb also for the hauppauge tiger cards [dougsland@redhat.com: fixed rejects due changes in sms-cards.c] Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Acked-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13294): dvb-usb-friio: cleaning up unnecessary functionsAkihiro Tsukada
This patch removes some fe->ops.X() functions which do nothing more useful than the default. Signed-off-by: Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13293): dvb-usb-friio: return the correct DTV_DELIVERY_SYSTEMAkihiro Tsukada
This patch makes the driver return the correct DTV_DELIVERY_SYSTEM. The driver previously returned SYS_UNDEFINED for DTV_DELIVERY_SYSTEM property, as it lacked any driver specific S2API support. Signed-off-by: Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13292): tvp514x: recognize the error case in tvp514x_read_reg()Sebastian Andrzej Siewior
i2c_smbus_read_byte_data() returns a negative value on error. It is very likely to be != -1 (-EPERM). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13290): em28xx-dvb: Convert printks to em28xx_err and em28xx_infoFilipe Rosset
Convert printks to em28xx_err and em28xx_info Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13289): em28xx-audio: Convert printks to em28xx_errFilipe Rosset
Convert printks to em28xx_err. Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13288): adding __init/__exit macros to various driversPeter Huewe
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following drivers in media video: drivers/media/video/ivtv/ivtv-driver.c drivers/media/video/cx18/cx18-driver.c drivers/media/video/davinci/dm355_ccdc.c drivers/media/video/davinci/dm644x_ccdc.c drivers/media/video/saa7164/saa7164-core.c drivers/media/video/saa7134/saa7134-core.c drivers/media/video/cx23885/cx23885-core.c Cc: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Andy Walls <awalls@radix.net> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13285): vpfe_capture: keep index within bound in vpfe_cropcap()Roel Kluin
If vpfe_dev->std_index equals ARRAY_SIZE(vpfe_standards), that is one too large. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13271a): Fix a badly solved merge conflictMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13271): TS speed check. Logging transport stream speed in Kbits per ↵Abylay Ospan
second [mchehab@redhat.com: add asm/div64.h and allocate vars only if dvb_demux_speedcheck specified] Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13269): saa7134: codingstyle: use /* style comments */ instead of //Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13267): gspca_mr97310a: Change brightness for VGA type 1 cameras ↵Theodore Kilgore
downward gspca_mr97310a: Change brightness for VGA type 1 cameras downward Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13266): gspca_mr97310a: Fix / update some commentsTheodore Kilgore
gspca_mr97310a: Fix / update some comments Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13265): gspca_mr97310a: Partly back off red gain change for Sakar ↵Theodore Kilgore
Digital VGA camera gspca_mr97310a: Partly back off red gain change for Sakar Digital VGA camera Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13262): tda18271: fix regression preventing std map override from ↵Michael Krufky
taking effect In the changeset entitled, "tda18271: add support for the set_config method", the initialization order was changed such that the standard map overrides were being applied before loading the default standard map, based on the stepping of the silicon. This changeset restores the proper order by processing the standard map overrides both within the tda18271_set_config() and the tda18271_attach() functions, after we read the id register of the tuner. Thanks to Michael Obst for his testing, helping me to identify the regression. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Michael Obst <mike.obst@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13260): saa7134: add support for Leadtek Winfast DTV-1000S remote ↵Michael Obst
control Signed-off-by: Michael Obst <mike.obst@gmail.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13259): saa7134: fix badly merged DTV1000S patchMichael Krufky
As pointed out by Hermann Pitton, it turns out that the DTV1000S card's analog entry made it into the #if 0 flyvideo tweaks in saa7134-cards.c and is not valid there. This patch fixes the problem. Cc: hermann pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13253): cx23885: CodingStyle fixAndy Walls
Add whitespace around binary operators in cx23888-ir.c Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13251): gspca - sonixj: Cleanup code and change some comments.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13250): gspca - zc3xx: Add some delays and warn on i2c errors.Jean-Francois Moine
This patch fixes the kernel bug 14195 (random errors - bad images - with the webcam 10fd:8050 - sensor tas5130cxx). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13249): gspca - pac7311: Webcam 093a:2628 added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13247): tuner-core: dont force every tuner to set frequency at startupMichael Krufky
Setting the tuner frequency at the same time as initializing the other devices on the i2c bus can cause problems on devices that require firmware download or extensive calibration proceduces during initialization. This change allows us to prevent the tune at startup for devices that perform better without it. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13245): gspca_mr97310a: Change blue gain setting for Sakar Digital ↵Theodore Kilgore
VGA camera gspca_mr97310a: Change blue gain setting for Sakar Digital VGA camera Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13244): gspca_mr97310a: Fix / update some commentsTheodore Kilgore
gspca_mr97310a: Fix / update some comments Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13243): gscpa_mr97310a: Add Trust Spyc@m 100 USB IDAurelien Jacobs
gscpa_mr97310a: Add Trust Spyc@m 100 USB ID Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13242): gspca_mr97310a: Add minimum clock divider controlHans de Goede
When "shooting" certain (quite rare) scenes, the mr97310's compression is not effective and it cannot keep up with the data stream. This patch adds a minimum clock divider control, which influences the maximum framerate, libv4l will automatically increase this minimum clockdiv control when it detect the cam cannot keep up. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13241): Cleanup redundant tests on unsignedRoel Kluin
The variables are unsigned so the test `>= 0' is always true, the `< 0' test always fails. In these cases the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13239): saa7146: fix memory leakage in pagetable-handlingJohann Friedrichs
In buffer_release() the previously allocated pagetables are not freed, which might result in a memory leak in certain application use-cases, where the frame format is changed from planar format to non-planar format. The fix explicitely frees the page tables when a format change is done and when buffer_release() is called. Signed-off-by: Johann Friedrichs <johann.friedrichs@web.de> Signed-off-by: Michael Hunold <hunold@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_powerLaurent Pinchart
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice power state from the core. This use case is already partially covered by the tuner s_standby operation, but no way to explicitly come back from the standby state is available. Rename the tuner s_standby operation to core s_power, and fix tuner drivers accordingly. The tuner core will call s_power(0) instead of s_standby(). No explicit call to s_power(1) is required for tuners as they are supposed to wake up from standby automatically. [mchehab@redhat.com: CodingStyle fix] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13236): ir-kbd-i2c: Don't reject unknown I2C addressesJean Delvare
I do not think it makes sense any longer for ir-kbd-i2c to reject devices at unknown I2C addresses. The caller can provide all the details about how the device should be handled. Having to add new addresses to ir-kbd-i2c so that they aren't rejected is a pain we don't need. Unsupported devices will be spotted a few lines later anyway. This already lets us unlist 2 addresses (0x7a and 0x2d) for which handling details are always provided by the caller (saa7134-input). Hopefully we can remove more in the future. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13235): saa7134: Complete the IR address listJean Delvare
Google is pretty clear that the HVR 1110 IR chip is always at address 0x71 and the BeholdTV IR chip is always at address 0x2d. This completes the list of IR device addresses for the SAA7134-based adapters, and we no longer need to probe any of them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13234): IR device at I2C address 0x7aJean Delvare
The i2c core prevents us from probing I2C address 0x7a because it's not a valid 7-bit address (reserved for 10-bit addressing.) So we must stop probing this address, and explicitly list all adapters which use it. Under the assumption that only the Upmost Purple TV adapter uses this invalid address, this fix should do the trick. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: hermann pitton <hermann-pitton@arcor.de> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13233): i2c_board_info can be localJean Delvare
Recent fixes to the em28xx and saa7134 drivers have been overzealous. While the ir-kbd-i2c platform data indeed needs to be persistent, the struct i2c_board_info doesn't, as it is only used by i2c_new_device(). So revert a part of the original fixes, to save some memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13232): cx25840 6.5MHz carrier detection fixesAleksandr V. Piskunov
cx25840: Disable 6.5MHz carrier autodetection for PAL, always assume its DK. Only try to autodetect 6.5MHz carrier for SECAM if user accepts both system DK and L. Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Reviewed-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13231): pwc: Use kernel's simple_strtol()Andy Shevchenko
Change own implementation of pwc_atoi() by simple_strtol(x, NULL, 10). Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13228): pvrusb2: Cosmetic kernel log tweakMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13227): pvrusb2: Fix redundant message on driver initialization ↵Mike Isely
failure (missing break) After detecting failure due to module initialization error, get out. Don't report jammed hardware. Problem due to a missing break statement. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13226): pvrusb2: Add hardware description to debuginfo outputMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13225): pvrusb2: Report hardware description to kernel log upon ↵Mike Isely
initialization The driver also contains a piece of configuration data that produces a one line description of the specific hardware being driver (e.g. "Hauppauge 24xxx", "OnAir", etc). This change generates an informational message to the kernel log reporting the hardware type being driven. This is a very useful thing to know when diagnosing problems. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13224): pvrusb2: Improve diagnostic info on driver initialization ↵Mike Isely
failure It used to be that the only real detectable reason for the driver to fail during initialization would be that if the hardware is simply jammed. However with the advent of the sub-device mechanism in V4L it is possible now to detect if a sub-device module fails to load successfully. The pvrusb2 driver does in fact react to this by also (correctly) failing, however the original diagnostic message "hardware is jammed" was still being reported. This misleads the user because in fact it might not actually be a hardware failure. This change adds logic to tell the difference and then report a more appropriate message to the kernel log. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13223): pvrusb2: Soften encoder warning messageMike Isely
pvrusb2: Encoder failures are mostly recoverable by the driver. While it would sure be nice not to have the failure happen in the first place, this has been going on for years and I doubt that a real solution will ever present itself. I think that part's firmware is just slightly flakey and we have to deal with it. The driver does deal with it just fine, but the warning message going into the kernel log is probably a little more alarming than it should be. So try to soften up the warning somewhat. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13222): pvrusb2: Make more info available to udevMike Isely
pvrusb2: Associate V4L device node in sysfs with the underlying USB device. This opens the door to device information tracking in udev Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13220): tda18271: increment module version minorMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 22:50:15 +0000