aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-22atm: dereference of he_dev->rbps_virt in he_init_group()roel kluin
he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22sky2: Set SKY2_HW_RAM_BUFFER in sky2_initMike McCormack
The SKY2_HW_RAM_BUFFER bit in hw->flags was checked in sky2_mac_init(), before being set later in sky2_up(). Setting SKY2_HW_RAM_BUFFER in sky2_init() where other hw->flags are set should avoid this problem recurring. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22atl1c:remove compiling warningjie.yang@atheros.com
Set wol_ctrl_data to value 0, to remove compiling warning. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22drivers/net: remove duplicate structure field initializationJulia Lawall
The definitions of vnet_ops and ehea_netdev_ops have initializations of a local function and eth_change_mtu for their respective ndo_change_mtu fields. This change uses only the local function. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column): cocci.print_main(fld,p0) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22kaweth: Fix memory leak in kaweth_control()Kevin Cernekee
kaweth_control() never frees the buffer that it allocates for the USB control message. Test case: while :; do ifconfig eth2 down ; ifconfig eth2 up ; done This is a tiny buffer so it is a slow leak. If you want to speed up the process, you can change the allocation size to e.g. 16384 bytes, and it will consume several megabytes within a few minutes. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22smsc95xx: add additional USB product IDsSteve Glendinning
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22net: xilinx_emaclite: Fix problem with first incoming packetMichal Simek
You can't ping the board or connect to it unless you send any packet out from board. Tested-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22netxen: fix firmware init after resumeDhananjay Phadke
After successful firmware init, return instead of falling to error path (leading to detach) after resuming to D0 state. This was broken in recent firmware reset rehaul. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22netxen: fix minor tx timeout bugDhananjay Phadke
Fix minor bug in netdev tx timeout handling which could always lead to firmware reset instead of pci function reset. netxen_nic_reset_context() requires __NX_RESETTING bit cleared. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22pcmcia: pcnet_cs.c removing useless conditionJaswinder Singh Rajput
'if (i < NR_INFO)' will only true if we breaks from 'for (i = 0; i < NR_INFO; i++)' So removing useless 'if (i < NR_INFO)' This also fixed following compilation warning : CC [M] drivers/net/pcmcia/pcnet_cs.o drivers/net/pcmcia/pcnet_cs.c: In function ‘get_hwinfo’: drivers/net/pcmcia/pcnet_cs.c:321: warning: ‘base’ may be used uninitialized in this function Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21igb: resolve namespacecheck warning for igb_hash_mc_addrAlexander Duyck
This patch resolves a warning seen when doing namespace checking via "make namespacecheck" Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21ixgbe: move rx queue RSC configuration to a separate functionNelson, Shannon
Shorten ixgbe_configure_rx() and lessen indent depth. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21ixgbe: Allow tx itr specific settingsNelson, Shannon
Allow the user to set Tx specific itr values. This only makes sense when there are separate vectors for Tx and Rx. When the queues are doubled up RxTx on the vectors, we still only use the rx itr value. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21ixgbe: fix sfp_timer clean up in ixgbe_downDon Skidmore
We weren't stoping the sfp_timer after the device was brought down. This patch properly cleans up. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interfaceSebastian Haas
This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21cpc-usb: Removed driver from staging treeSebastian Haas
This patch prepares replacing the staging driver cpc-usb with the new developed ems_usb CAN driver. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21cpmac: fix compilation errors against undeclared BUS_ID_SIZEFlorian Fainelli
With the removal of BUS_ID_SIZE, cpmac was not fully converted to use MII_BUS_ID_SIZE as it ought to. This patch fixes the following cpmac build failure: CC drivers/net/cpmac.o drivers/net/cpmac.c: In function 'cpmac_start_xmit': drivers/net/cpmac.c:563: warning: comparison of distinct pointer types lacks a cast drivers/net/cpmac.c: In function 'cpmac_probe': drivers/net/cpmac.c:1112: error: 'BUS_ID_SIZE' undeclared (first use in this function) drivers/net/cpmac.c:1112: error: (Each undeclared identifier is reported only once drivers/net/cpmac.c:1112: error: for each function it appears in.) Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17be2net: fix some cmds to use mccq instead of mboxSathya Perla
All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMAJie Yang
use the wrong API when free dma. So when map dma use a flag to demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free the dma, check the flags to select the right APIs('pci_unmap_single' or 'pci_unmap_page'). set the flags type to u16 instead of unsigned long on David's comments. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17wl12xx: Fix print_mac() conversion.David S. Miller
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16wl12xx: switch to %pM to print the mac addressJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16b44: the poll handler b44_poll must not enable IRQ unconditionallyDongdong Deng
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when it is available. As netconsole can be used from almost any context, IRQ must not be enabled blindly in the NAPI handler of the driver which supports netpoll. Call trace: netpoll_send_skb() { local_irq_save(flags) -> netpoll_poll() -> poll_napi() -> poll_one_napi() -> napi->poll() -> b44_poll() local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16bonding: make ab_arp select active slaves as other modesJiri Pirko
When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-09-16ssb/sdio: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/ssb/sdio.c:336: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' drivers/ssb/sdio.c:443: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-16p54usb: add Zcomax XG-705A usbidChristian Lamparter
This patch adds a new usbid for Zcomax XG-705A to the device table. Cc: stable@kernel.org Reported-by: Jari Jaakola <jari.jaakola@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-16mlx4: Fix access to freed memoryVitaliy Gusev
catas_reset() uses pointer to mlx4_priv, but mlx4_priv is not valid after call mlx4_restart_one(). Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15sky2: Make sure both ports initialize correctlyStephen Hemminger
Sorry Mike, I sent you off the wrong way. The following is simpler and the second port is diffrent enough in setup (because of NAPI), that the following is simpler. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15sky2: transmit ring accountingStephen Hemminger
Be more accurate about number of transmit list elements required. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15pcnet_cs: add cis of Linksys multifunction pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of Linksys lan&modem mulitifunction pcmcia card and some modem card(MT5634ZLX, RS-COM-2P). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15bonding: remap muticast addresses without using dev_close() and dev_open()Moni Shoua
This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15can: fix NOHZ local_softirq_pending 08 warningOliver Hartkopp
When using nanosleep() in an userspace application we get a ratelimit warning NOHZ: local_softirq_pending 08 for 10 times. The echo of CAN frames is done from process context and softirq context only. Therefore the usage of netif_rx() was wrong (for years). This patch replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. It also adds a missing comment that can_send() must no be used from hardirq context. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Urs Thuermann <urs@isnogud.escape.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14igb: do not allow phy sw reset code to make calls to null pointersAlexander Duyck
In the case of fiber and serdes adapters we were seeing issues with ethtool -t causing kernel panics due to null function pointers. To prevent this we need to exit out of the phy reset code in the event that we do not have a valid phy. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14igb: reset sgmii phy at start of initAlexander Duyck
Our SGMII phy code was incomplete in that it was not actually placing the phy in SGMII mode and as a result the PHY was not able to establish a link when connected to a non serdes link partner. This patch updates the code to combine the SGMII/serdes PCS init and to add the necessary reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14ixgbe: Create separate media type for CX4 adaptersPeter P Waskiewicz Jr
Currently the media type detection for CX4 adapters lumps them into a type of fiber. This causes some strange fallout when firmware verification is done on the NIC, and certain fiber NIC rules get enforced incorrectly. This patch introduces a new media type for CX4, and puts both 82598 and 82599 CX4 adapters into this bucket. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14ixgbe: Add support for 82599-based CX4 adaptersPeter P Waskiewicz Jr
This patch adds support for CX4 adapters based on 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14ixgbe: Properly disable packet split per-ring when globally disabledPeter P Waskiewicz Jr
The packet split feature was recently moved out of the adapter-wide flags feature field and into a per-Rx ring feature field. In the process, packet split isn't properly disabled in the Rx ring if the adapter has it globally disabled, followed by a device reset. This won't impact the driver today, since it's always in packet split mode. However, this will prevent any pitfalls if someone disables packet split on the adapter in the future and doesn't disable it in each ring. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14cdc-phonet: remove noisy debug statementRémi Denis-Courmont
From: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14net: constify remaining proto_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14netdev: smc91x: drop Blackfin cruftMichael Hennerich
Now that all Blackfin boards are using the board resources, we don't need to keep the arch/board specific crap in the driver header. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14Merge branch 'osync_cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'osync_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: fsync: wait for data writeout completion before calling ->fsync vfs: Remove generic_osync_inode() and sync_page_range{_nolock}() fat: Opencode sync_page_range_nolock() pohmelfs: Use new syncing helper xfs: Convert sync_page_range() to simple filemap_write_and_wait_range() ocfs2: Update syncing after splicing to match generic version ntfs: Use new syncing helpers and update comments ext4: Remove syncing logic from ext4_file_write ext3: Remove syncing logic from ext3_file_write ext2: Update comment about generic_osync_inode vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode vfs: Rename generic_file_aio_write_nolock ocfs2: Use __generic_file_aio_write instead of generic_file_aio_write_nolock pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write() vfs: Export __generic_file_aio_write() and add some comments vfs: Introduce filemap_fdatawait_range
2009-09-14ssb: Fix error when V1 SPROM extraction is forcedLarry Finger
When an SPROM revision is not recognized, the code falls back to a V1 SPROM; however, that revision is not forced in the appropriate structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: disable powersave for 4965Johannes Berg
There's a bug in 4965 powersave that appears to be related to the way it keeps track of its data during sleep, but we haven't found it yet. Due to that, using powersave may spontaneously cause the device to SYSASSERT when transitioning from sleep to wake. Therefore, disable powersave for 4965, until (if ever, unfortunately) we can identify and fix the problem. Cf. http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1982 which was closed, but now has re-appeared with IDLE mode, which probably means we never really fixed it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: find the correct first antennaWey-Yi Guy
We can not assume antenna "A" is the first valid anttena for all the NIC. Need to make sure choice the correct antenna based on h/w configuration for transmit to avoid sending frame on invalid antenna Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: fix potential rx buffer lossReinette Chatre
RX handling maintains a few lists that keep track of the RX buffers. Buffers move from one list to the other as they are used, replenished, and again made available for usage. In one such instance, when a buffer is used it enters the "rx_used" list. When buffers are replenished an skb is attached to the buffer and it is moved to the "rx_free" list. The problem here is that the buffer is first removed from the "rx_used" list _before_ the skb is allocated. Thus, if the skb allocation fails this buffer remains removed from the "rx_used" list and is thus lost for future usage. Fix this by first allocating the skb before trying to attach it to a list. We add an additional check to not do this unnecessarily. Reported-by: Rick Farrington <rickdic@hotmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14iwlwifi: fix HT operation in 2.4 GHz bandDaniel C Halperin
When we cleaned up the driver to properly tell mac80211 about HT rates ("iwlwifi: use iwl_hwrate_get_mac80211_idx where appropriate"), we broke internal rate indexing in 2.4 GHz band. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Tested-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14b43: Fix resume failureMichael Buesch
This fixes a resume failure where a signal is pending on resume so the firmware upload fails. This removes the interruptible sleep, because we don't really need it. In the worst case (with broken firmware) the sleep loop will take 1 second. In the common case (working firmware), it will only take a few milliseconds. So we don't really need to be interruptible. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ssb: Disable verbose SDIO coreswitchMichael Buesch
Disable SDIO coreswitch debugging. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14wireless: default CONFIG_WLAN to yLuis R. Rodriguez
When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ath9k: Fix bug in ANI channel handlingSujith
When processing MIB interrupts, OFDM and CCK error handling routines for low RSSI values have to be invoked only when the channel mode is 11G/11B. Since HT channels will also fall under the bands 2Ghz/5Ghz, check appropriately. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-25 13:09:47 +0000