aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits) [SPARC64]: Update defconfig. [SPARC64]: Fix 2 bugs in huge page support. [SPARC64]: CONFIG_BLK_DEV_RAM fix [SPARC64]: Optimized TSB table initialization. [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build. [SPARC64]: Use SLAB caches for TSB tables. [SPARC64]: Don't kill the page allocator when growing a TSB. [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set. [SPARC64]: Increase top of 32-bit process stack. [SPARC64]: Top-down address space allocation for 32-bit tasks. [SPARC64] bbc_i2c: Fix cpu check and add missing module license. [SPARC64]: Fix and re-enable dynamic TSB sizing. [SUNSU]: Fix missing spinlock initialization. [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts. [SPARC64]: First cut at VIS simulator for Niagara. [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check. [SPARC64]: Add SMT scheduling support for Niagara. [SPARC64]: Fix 32-bit truncation which broke sparsemem. [SPARC64]: Move over to sparsemem. [SPARC64]: Fix new context version SMP handling. ...
2006-03-20Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits) [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2 [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h [PATCH] ipw2100: semaphore to mutexes conversion [PATCH] ipw2100: Fix radiotap code gcc warning [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode [PATCH] ipw2x00: expend Copyright to 2006 [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun [PATCH] ieee80211: Don't update network statistics from off-channel packets. [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1 [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format [PATCH] ipw2200: wireless extension sensitivity threshold support [PATCH] ipw2200: Enables the "slow diversity" algorithm [PATCH] ipw2200: Set a meaningful silence threshold value [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG [PATCH] ipw2200: Change debug level for firmware error logging [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1' [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking [PATCH] ipw2200: Add signal level to iwlist scan output ...
2006-03-20Merge branch 'block-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/block * 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block: [PATCH] fix rmmod problems with elevator attributes, clean them up [PATCH] elevator_t lifetime rules and sysfs fixes [PATCH] noise removal: cfq-iosched.c [PATCH] don't bother with refcounting for cfq_data [PATCH] fix sysfs interaction and lifetime rules handling for queues [PATCH] regularize blk_cleanup_queue() use [PATCH] fix cfq_get_queue()/ioprio_set(2) races [PATCH] deal with rmmod/put_io_context() races [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking [PATCH] stop cfq from pinning queue down [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue [PATCH] fix the exclusion for ioprio_set() [PATCH] keep sync and async cfq_queue separate [PATCH] switch to use of ->key to get cfq_data by cfq_io_context [PATCH] stop leaking cfq_data in cfq_set_request() [PATCH] fix cfq hash lookups [PATCH] fix locking in queue_requests_store() [PATCH] fix double-free in blk_init_queue_node() [PATCH] don't do exit_io_context() until we know we won't be doing any IO
2006-03-20Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-03-20Merge branch 'master'Jeff Garzik
2006-03-20[SPARC64] bbc_i2c: Fix cpu check and add missing module license.David S. Miller
Should allow cheetah_plus cpu types and don't taint the kernel. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SUNSU]: Fix missing spinlock initialization.David S. Miller
Caught by CONFIG_DEBUG_SPINLOCK. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.David S. Miller
Sun does't put an SEEPROM behind the tigon3 chip, among other things, so accesses to these areas just give bus timeouts. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC] serial: Make sure sysfs nodes get named correctly.David S. Miller
Because we play this trick where we use ttyS? in increasing minor numbers for different sunfoo.c drivers, we have to inform the TTY layer of this. Do so by setting the tty->name_base appropriately. Probably there should be a generic way to do this in the serial core, but for now... Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Fix locking in sunhv_start_tx()David S. Miller
Caller takes the lock already. Also, fixup the poll loop in sunhv_break_ctl(). Just like in console write, we udelay(2) and use a loop limit of 1000000 iterations. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Put sunhv.o earliest in the list of sparc serial drivers.David S. Miller
So that it will show up as /dev/ttyS0. Otherwise things like installers will try to run on whatever serial port gets probed first. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Support SYSRQ properly.David S. Miller
By calling uart_handle_break(). We'll still do the "sun_do_break()" handling if the user gives two breaks in a row. We should probably do this in the other Sparc serial drivers too. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Fix OOPS on sunhv interrupts.David S. Miller
Until the uart is openned, port->info is NULL. Also, init the port->irq properly and give a non-zero port->membase so that the uart device reporting is done. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Decode virtual-devices interrupts correctly.David S. Miller
Need to translate through the interrupt-map{,-mask] properties. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Bug fixes.David S. Miller
Add udelay to polling console write loop, and increment the loop limit. Name the device "ttyHV" and pass that to add_preferred_console() when we're using hypervisor console. Kill sunhv_console_setup(), it's empty. Handle the case where we don't want to use hypervisor console. (ie. we have a head attached to a sun4v machine) Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Use virtual-devices layer to get interrupt.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Prevent registering wrong serial console.David S. Miller
If the console is not for a particular Sun serial controller, set the drv->cons to NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Add SUN4V Hypervisor Console driver.David S. Miller
Since it can do things like BREAK and HUP, we implement this as a serial uart driver. This still needs interrupt probing code, as I haven't figured out how interrupts will work or be probed for on SUN4V yet. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-19[TG3]: 40-bit DMA workaround part 2Michael Chan
The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-18[PATCH] regularize blk_cleanup_queue() useAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18[PATCH] Kconfig: swap VIDEO_CX88_ALSA and VIDEO_CX88_DVBMichael Krufky
VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS When cx88-alsa was added to cx88/Kconfig, it was added in between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused undesireable effects to the appearance of the menu options in menuconfig. This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134, and restore the correct menuconfig appearance. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-18[PATCH] Fixed em28xx based system lockupMarkus Rechberger
Fixed em28xx based system lockup, device needs to be initialized before starting the isoc transfer otherwise the system will completly lock up. Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17[PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.hZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: semaphore to mutexes conversionIngo Molnar
semaphore to mutexes conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: Fix radiotap code gcc warningZhu Yi
Fix gcc warning: ipw2100.c:2460: ISO C90 forbids mixed declarations and code Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: add radiotap headers to packtes captured in monitor modeStefan Rompf
Signed-off-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: Andrea Merello <andreamrl at tiscali it> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2x00: expend Copyright to 2006Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] drivers/net/wireless/ipw2200.c: fix an array overunAdrian Bunk
This patch fixes a big array overun found by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image formatJames Ketrenos
This patch modifies the driver to support the ipw2200-fw-3.0 image format. The 3.0 fw image does not add any new capabilities, but as a result of image format changes, it should fix two problems experienced by users: 1) Race conditions with the request_firmware interface and udev/hotplug are improved as only a single request_firmware call is now required to load the firmware and microcode (vs. 3 separate calls previously) 2) The monitor mode firmware (sniffer) is now packaged with the correct boot image so it can now function without frequent restarts. Note: Once you apply this patch, you will also need to upgrade your firmware image to the 3.0 version available from: http://ipw2200.sf.net/firmware.php Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: wireless extension sensitivity threshold supportOlivier Hochreutiner
The patch allows the user to set the handover threshold, i.e. the number of consecutively missed beacons that will trigger a roaming attempt. The disassociation threshold is set to 3 times the handover threshold. Signed-off-by: Olivier Hochreutiner <olivier.hochreutiner@epfl.ch> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Enables the "slow diversity" algorithmCahill, Ben M
This forces one antenna or the other, if the background noise is significantly quieter in one than the other. It favors the quieter antenna, and won't kick in unless the difference is significant. Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Set a meaningful silence threshold valueCahill, Ben M
Set a meaningful silence threshold value (replacing our previous "0" default), which gets rid of the gratuitous "Link deterioration" notifications that we've been receiving from firmware. This notification feature tells the driver information to help it determine when to pre-emptively restart the firmware/ucode in anticipation of firmware errors! But since setting this new threshold, I haven't seen any such notifications. At least it keeps the logs a little less busy. Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUGZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Change debug level for firmware error loggingZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Filter unsupported channels out in ad-hoc modeZhu Yi
Currently iwlist ethX freq[uency]/channel lists all the channels the card supported for the current region, which includes some channels can only be used in infrastructure mode. This patch filters these channels out if the card is currently in ad-hoc mode. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with commentZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'Zhu Yi
When loading the ipw2200 module with disabled=1, rf_kill is activated after every mode change. This is caused by ipw_sw_reset() is called when a mode is changed. The patch fixed the problem by distinguishing the purposes with the 'option' paramenter. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: remove the WPA card associates to non-WPA AP checkingZhu Yi
wpa_supplicant needs to set wpa_enabled unconditionally, with this check it hasn't been possible to connect to non-WPA networks using wpa_supplicant. So remove below check. if (priv->ieee->wpa_enabled && network->wpa_ie_len == 0 && network->rsn_ie_len == 0) Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Add signal level to iwlist scan outputBill Moss
This patch does two things. It uses the parameter IW_QUAL_DBM which is new in WE-19 to cause signal level and noise to be reported in dBm by the wireless tools. It also defines the signal level as an unsigned integer so that the signal level will be reported by iwlist iface scan. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: use generic ieee80211_get_hdrlen() to get packet lengthZhu Yi
replace ipw2200 specific frame_hdr_len() with generic ieee80211 routine ieee80211_get_hdrlen() Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: fix a potential NULL pointer dereferenceZhu Yi
Only on CONFIG_IPW2200_DEBUG is not defined Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: stop netdev queue if h/w doesn't have space for new packetsJames Ketrenos
The patch roll back the change we made to support for the ability to start/stop independent Tx queues within a single net device in order to support 802.11e QoS. We need to be able to indicate to the upper layers that packets of a given priority can not be sent any more without halting transmission of all packets, and without rescheduling high priority packets down to the next priority level. So we return NETDEV_TX_BUSY in this case and rely on the stack would take care of rescheduling... which it apparently does immediately and consumes the CPU. This caused the ksoftirqd kernel thread consuming almost all the CPU... To put the code back to the way it was before we made these changes we put the call netif_queue_stop back in ipw_tx_skb. This effectively disables multiple priority based transmit queues for 802.11e, but given that its broken anyway... Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: print geography code upon module loadHenrik Brix Andersen
Given the amount of support requests for the meaning of the geography code I've written a patch for printing this information on module load no matter the debug level. I've also added a section to the README.ipw2200 file listing the geography codes and their meaning. Signed-off-by: Henrik Brix Andersen <brix@gentoo.org> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] drivers/net/wireless/ipw2200.c: make ipw_qos_current_mode() staticAdrian Bunk
This patch makes the needlessly global function ipw_qos_current_mode() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] Remove duplicated code from ipw2200.cLarry Finger
As stated in a comment, the ipw2200 driver uses several routines that were borrowed from ieee80211_geo.c. As ipw2200 requires ieee80211, these routines are duplicated. The attached patch, which is sent as an attachment to preserve whitespace, converts ipw2200.c to use the ieee80211 versions, thereby reducing bloat in both the source and binary. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] dm stripe: Fix boundsKevin Corry
The dm-stripe target currently does not enforce that the size of a stripe device be a multiple of the chunk-size. Under certain conditions, this can lead to I/O requests going off the end of an underlying device. This test-case shows one example. echo "0 100 linear /dev/hdb1 0" | dmsetup create linear0 echo "0 100 linear /dev/hdb1 100" | dmsetup create linear1 echo "0 200 striped 2 32 /dev/mapper/linear0 0 /dev/mapper/linear1 0" | \ dmsetup create stripe0 dd if=/dev/zero of=/dev/mapper/stripe0 bs=1k This will produce the output: dd: writing '/dev/mapper/stripe0': Input/output error 97+0 records in 96+0 records out And in the kernel log will be: attempt to access beyond end of device dm-0: rw=0, want=104, limit=100 The patch will check that the table size is a multiple of the stripe chunk-size when the table is created, which will prevent the above striped device from being created. This should not affect tools like LVM or EVMS, since in all the cases I can think of, striped devices are always created with the sizes being a multiple of the chunk-size. The size of a stripe device must be a multiple of its chunk-size. (akpm: that typecast is quite gratuitous) Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-16Merge branch 'upstream-fixes'Jeff Garzik
2006-03-16[netdrvr] fix array overflows in Chelsio driverScott Bardone
Adrian Bunk wrote: > The Coverity checker spotted the following two array overflows in > drivers/net/chelsio/sge.c (in both cases, the arrays contain 3 > elements): [snip] This is a bug. The array should contain 2 elements. Here is the fix. Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>