aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-03-15obsolete config in kernel source: HSO_AUTOPMChristoph Egger
CONFIG_HSO_AUTOPM is set by KConfig / set in the Kernel source, makefiles and won't be ever set this way, therefor simply removing the protected code. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15obsolete config in kernel source: USE_INTERNAL_TIMERChristoph Egger
CONFIG_USE_INTERNAL_TIMER seems to be the remainings of some experiment. It is explicitely #undef-ed as not working, only referenced from one source file and rather aged. Hereby cleaning it from the kernel tree. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Acked-by: Roel Kluin <roel.kluin@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15atm: use for_each_set_bit()Akinobu Mita
Replace open-coded loop with for_each_set_bit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15drivers/net: drop redundant memsetJulia Lawall
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15i4l: change magic numbers in Eicon DIVA ISDN driver to symbolic namesIan Munsie
Replace references to the '20' magic number found throughout the Eicon ISDN driver for the length of the station_id field in the T30_INFO struct with the T30_MAX_STATION_ID_LENGTH symbolic constant. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Cc: Armin Schindler <mac@melware.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15i4l: silence compiler warnings for array access in Eicon DIVA ISDN driverIan Munsie
When compiling this driver, the compiler throws the following warnings: drivers/isdn/hardware/eicon/message.c:8426: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8427: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8434: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8435: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8436: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8447: warning: array subscript is above array bounds This arises from the particular semantics the driver is using to write to the nlc array (static byte[256]). The array has a length in byte 0 followed by a T30_INFO struct starting at byte 1. The T30_INFO struct has a number of variable length strings after the station_id entry, which cannot be explicitly defined in the struct and the driver accesses them with an array index to station_id beyond the length of station_id. This patch merely changes the semantics that the driver uses to access the entries after the station_id entry to use the original 256 byte nlc array taking the offset and length of the station_id entry to calculate where to write in the array, thereby silencing the warning. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Cc: Armin Schindler <mac@melware.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15isdn: misplaced parenthesis in pof_handle_data()Roel Kluin
The parenthesis was misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: change smp_mb() comment to conform the trueStanislaw Gruszka
Access to fp->tx_bp_prod is protected by __netif_tx_lock, smp_mb() is not needed for that. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: remove not necessary compiler barrierStanislaw Gruszka
Access to fp->tx_bd_prod is protected by __netif_tx_lock, so we do not need any barrier for that. Update of fp->tx_bd_cons in bnx2x_tx_int() is not protected by lock, but barrier() nor smb_mb() in bnx2x_tx_avail() not guarantee we will see values that is written on other cpu. Ordering issues between netif_tx_stop_queue(), netif_tx_queue_stopped(), fp->tx_bd_cons = bd_cons and bnx2x_tx_avail() are already handled by smp_mb() in bnx2x_tx_int() and bnx2x_start_xmit(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15bnx2x: use smp_mb() to keep ordering of read write operationsStanislaw Gruszka
Since we want to keep ordering of write to fp->bd_tx_cons and netif_tx_queue_stopped(txq), what is read of txq->state, we have to use general memory barrier. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15be2net: fix mccq create for big endian architecturesAjit Khaparde
The request to create an mccq was being dispatched without doing a byte swap of num_pages. This byte swap is necessary for Big Endian systems like PPC. Not having this fix leads mccq create to fail on BE ASICs running newer version of firmware, thereby causing driver initialization failure. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15TI DaVinci EMAC: Convert to dev_pm_opschaithrika@ti.com
Migrate from the legacy PM hooks to use dev_pm_ops structure. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15net: davinci emac: use dma_{map, unmap}_single API for cache coherencySekhar Nori
The davinci emac driver uses some ARM specific DMA APIs for cache coherency which have been removed from kernel with the 2.6.34 merge. Modify the driver to use the dma_{map, unmap}_single() APIs defined in dma-mapping.h Without this fix, the driver fails to compile on Linus's tree. Tested on DM365 and OMAP-L138 EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15e100: Fix ring parameter change handling regression.David S. Miller
When the PCI pool changes were added to fix resume failures: commit 98468efddb101f8a29af974101c17ba513b07be1 e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failu and commit 70abc8cb90e679d8519721e2761d8366a18212a6 e100: Fix broken cbs accounting due to missing memset. This introduced a problem that can happen if the TX ring size is increased. We need to size the PCI pool using cbs->max instead of the default cbs->count value. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messagesJoe Perches
On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote: > From: Mikael Pettersson <mikpe@it.uu.se> > Date: Wed, 10 Mar 2010 16:33:28 +0100 > > Booting 2.6.34-rc1 on a machine with a tulip nic I see > > a number of kernel messages that include "(null)" where > > previous kernels included the string "tulip0": > CC:'ing the guilty party :-) It's one of the following > commits: Thanks Mikael. Anonymity has some good attributes. Blame avoidance is one of them. I've broad shoulders. It's me, then Dwight Howard... There might be another few of these where ->name or ->dev was used before struct device or net_device was registered. I'll go back and check. tulip_core has: if (tp->flags & HAS_MEDIA_TABLE) { sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */ tulip_parse_eeprom(dev); strcpy(dev->name, "eth%d"); /* un-hack */ } So I don't feel _too_ bad. tulip_parse_eeprom is done before register_netdev so the logging there can not use netdev_<level> or dev_<level>(&dev->dev Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13sky2: Avoid rtnl_unlock without rtnl_lockMike McCormack
Make sure we always call rtnl_lock before going down the error path in sky2_resume, which unlocks the rtnl lock. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constantJulia Lawall
The constant TG3_FLAG_10_100_ONLY should be used with the tg3_flags field, not the tg3_flags2 field, as done elsewhere in the same file. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-10Merge branch 'wireless-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-03-10ipw2200: use kmalloc for large local variablesZhu Yi
Fixed below compiler warning: drivers/net/wireless/ipw2x00/ipw2200.c: In function ‘ipw_load_firmware’: drivers/net/wireless/ipw2x00/ipw2200.c:3260: warning: the frame size of 1168 bytes is larger than 1024 bytes Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: read eeprom IQ calibration values correctly for G modeBruno Randolf
we read the IQ correction values (i_cal and q_cal) for G mode from a wrong location (the same shifts as for A mode is applied which is incorrect). use correct locations, matching the docs and HAL sources. also we should write IQ correction only when we have that information in the EEPROM, starting from version 4. also write it in the same way as we do in the periodic recalibration (enable last), just to be sure. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix I/Q calibration (for real)Bruno Randolf
I/Q calibration was completely broken, resulting in a high number of CRC errors on received packets. before i could see around 10% to 20% CRC errors, with this patch they are between 0% and 3%. 1.) the removal of the mask in commit "ath5k: Fix I/Q calibration (f1cf2dbd0f798b71b1590e7aca6647f2caef1649)" resulted in no mask beeing used when writing the I/Q values into the register. additional errors in the calculation of the values (see 2.) resulted too high numbers, exceeding the masks, so wrong values like 0xfffffffe were written. to be safe we should always use the bitmask when writing parts of a register. 2.) using a (s32) cast for q_coff is a wrong conversion to signed, since we convert to a signed value later by substracting 128. this resulted in too low numbers for Q many times, which were limited to -16 by the boundary check later on. 3.) checked everything against the HAL sources and took over comments and minor optimizations from there. 4.) we can't use ENABLE_BITS when we want to write a number (the number can contain zeros). also always write the correction values first and set ENABLE bit last, like the HAL does. Signed-off-by: Bruno Randolf <br1@einfach.org> Cc: stable@kernel.org Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix TSF resetBruno Randolf
to reset the TSF, AR5K_BEACON_RESET_TSF has to be 1, not 0. also we have a function for that so use it. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: use fixed antenna for tx descriptorsBruno Randolf
when using a fixed antenna we should use the antenna number in all tx descriptors, otherwise the hardware will sometimes send the frame out on the other antenna. it seems like the hardware does not always respect the default antenna and diversity settings (esp. AR5K_STA_ID1_DEFAULT_ANTENNA). also i would like to note that antenna diversity does not always work correctly on 5414 (at least) when only one antenna is connected: for example all frames might be received on antenna A but still the HW tries to send on antenna B some times, causing packet loss. this is both verified with the antenna statistics output of the previous patch and a spectrum analyzer. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10libipw: split ieee->networks into small piecesZhu Yi
The ieee->networks consists of 128 struct libipw_network entries. If we allocate this chunk of memory altogether, it ends up with an order 4 page allocation. High order page allocation is likely to fail on system high load. This patch splits the big chunk memory allocation into small pieces, each is 344 bytes, allocates them with 128 times. The patch fixed bug http://bugzilla.kernel.org/show_bug.cgi?id=14989 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rt2x00: remove KSEG1ADDR define from rt2x00soc.hHelmut Schaa
Remove the KSEG1ADDR define from rt2x00soc.h as it redefines and covers the correct one from the arch/mips/include/asm/addrspace.h. Otherwise the driver oopses on the target platform (Ralink rt3050 board). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10net: add ColdFire support to the smc91x driverGreg Ungerer
Some embedded ColdFire based boards use the SMC 91x family of ethernet devices. (For example the Freescale M5249C3 and MoretonBay NETtel). Add IO access support to the SMC91x driver, and allow this driver to be configured for ColdFire platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10asix: fix setting mac address for AX88772Jussi Kivilinna
Setting new MAC address only worked when device was set to promiscuous mode. Fix MAC address by writing new address to device using undocumented command AX_CMD_READ_NODE_ID+1. Patch is tested with AX88772 device. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Hollis <dhollis@davehollis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tg3: Fix tg3_poll_controller() passing wrong pointer to tg3_interrupt()Louis Rilling
Commit 09943a1819a240ff4a72f924d0038818fcdd0a90 Author: Matt Carlson <mcarlson@broadcom.com> Date: Fri Aug 28 14:01:57 2009 +0000 tg3: Convert ISR parameter to tnapi forgot to update tg3_poll_controller(), leading to intermittent crashes with netpoll. Fix this. Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: change checksumming default for HiperSocketsFrank Blaschka
Deactivate inbound checksumming on HiperSocket is a valid but dangerous optimization in case the frame is routed from an OSA network to an HiperSockets network. To go for sure we change the default to software checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: no recovery after layer mismatch (z/VM NICs)Ursula Braun
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: set promisc off after trace disabling failureUrsula Braun
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: l3 send dhcp in non pass thru modeFrank Blaschka
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: enable kmsg hash processing in qeth_core_sys.cUrsula Braun
provide qeth kmsg definitions to enable hash string generation for kernel message created with dev_err(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-09Revert "iwlwifi: Send broadcast probe request only when asked to"Reinette Chatre
This reverts commit 21b2d8bd2f0d4e0f21ade147fd193c8b9c1fd2b9. As explained by Johannes: When we build a probe request frame in the buffer with the SSID, we could arrive over the limit of 200 bytes. When we build it in the buffer without the SSID (wildcard) we don't arrive over 200 bytes, but the ucode still allows direct probe in addition because it has an internal buffer that is larger when it inserts the SSID... Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09iwl3945: fix memory corruptionReinette Chatre
Recent patch "iwlwifi: move 3945 clip groups to 3945 data" exposed a memory corruption problem. When initializing the clip groups the code was mistakenly using the iwlagn rate count, not the 3945 rate count. This resulted in more memory being written than was allocated. "iwlwifi: move 3945 clip groups to 3945 data" moved the location where the clip groups are stored and the impact is now severe in that the number of configured TX queues is modified. Previously the "temperature" field was overwritten, which did not seem to affect the operation. Fix this one instance where wrong rate count was used. I also noticed one more location where the iwlagn rate count was used to index an iwl3945 array, fix this. I also modified one location that modified the iwlagn rate count to obtain the iwl3945 rate count ... just use the iwl3945 rate count directly. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2165 and http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2168 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-08can: fix bfin_can build error after alloc_candev() changeBarry Song
Looks like commit a6e4bc530403 didn't include updates to drivers so the Blackfin CAN driver fails to build now. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: remove extra space from board namesAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix bios version checkAmit Kumar Salecha
Bios sub version from unified fw image is calculated incorrect. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: validate unified fw imageSucheta Chakraborty
Validate all sections of unified fw image, before accessing them, to avoid seg fault. Signed-off-by: Sucheta Chakraborty <sucheta@dut6195.unminc.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix multicast handlingSucheta Chakraborty
For promiscuous mode, driver send request to device for deleting multicast addresses and again it send request for adding them back while exiting from this mode, this is bad for performance. Just setting device in promiscuous mode is enough, no need to del/add multicast addresses. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: additional driver statistics.Sucheta Chakraborty
Statistics added for lro/lso bytes, count for tx stop queue and wake queue and skb alloc failure count. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix tx csum statusSucheta Chakraborty
Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account to show tx csum status, which driver doesn't set while disabling tx csum. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove unused code in be_load_fwAjit Khaparde
This patch cleans up some unused code from be_load_fw(). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove usage of be_pci_funcAjit Khaparde
When PCI functions are virtuialized in applications by assigning PCI functions to VM (PCI passthrough), the be2net driver in the VM sees a different function number. So, use of PCI function number in any calculation will break existing code. This patch takes care of it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: bump version to 0.5.2Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: fallback to switch mode if no PHY chip foundFlorian Fainelli
If we were unable to detect a PHY on any of the MDIO bus id we tried instead of bailing out with -ENODEV, assume the MAC is connected to a switch and use MDIO bus 0. This unbreaks quite a lot of devices out there whose switch cannot be detected. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07cpmac: fix the receiving of 802.1q framesFlorian Fainelli
Despite what the comment above CPMAC_SKB_SIZE says, the hardware also needs to account for the FCS length in a received frame. This patch fix the receiving of 802.1q frames which have 4 more bytes. While at it unhardcode the definition and use the one from if_vlan.h. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07another pegasus usb net devicePetko Manolov
This one removes trailing whitespace in pegasus.h and more importantly adds new Pegasus compatible device. Signed-off-by: Julian Brown <julian@codesourcery.com> Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07irda-usb: add error handling and fix leakDan Carpenter
If the call to kcalloc() fails then we should return -ENOMEM. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 23:35:48 +0000