aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (10814): saa7146: some small fixesTrent Piepho
vidioc_enum_fmt_vid_overlay() did nothing but call vidioc_enum_fmt_vid_cap(), so just make saa7146_video_ioctl_ops.vidioc_enum_fmt_vid_overlay point to vidioc_enum_fmt_vid_cap() and get ride of vidioc_enum_fmt_vid_overlay(). Have gparm use v4l2_video_std_frame_period to fill in the frame period instead of just assuming PAL. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10813): v4l2: New function v4l2_video_std_frame_periodTrent Piepho
Some code was calling v4l2_video_std_construct() when all it cared about was the frame period. So make a function that just returns that and have v4l2_video_std_construct() use it. At this point there are no users of v4l2_video_std_construct() left outside of v4l2-ioctl, so it could be un-exported and made static. Change v4l2_video_std_construct() so that it doesn't zero out the struct v4l2_standard passed in. It's already been zeroed out in the common ioctl code. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10812): v4l2: Zero out read-only ioctls in one placeTrent Piepho
If an ioctl is read-only then the driver fills in all the fields. Lots of times drivers only care about some fields so it's best if video_ioctl2 takes care of zeroing out the entire structure before handing it to the driver. This saves code in each driver to do it and driver authors often forget. The existing memset code in some of the read-only ioctl handlers can be deleted. Convert a case statement to a single if statement. Deleted a debug line from ENUMAUDOUT that was copy-and-pasted to G_AUDOUT by mistake. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10811): videodev: only copy needed part of RW ioctl's parameterTrent Piepho
There are many RW ioctls() in v4l2 where userspace only supplies one or two of the first fields in the structure passed to the ioctl. The driver then fills in the rest of the fields. Instead of copying the entire structure from userspace to the kernel we only need to copy those fields that userspace is actually supposed to supply. What's more, the fields that are meant to be only be output from the driver can be zeroed out in the videodev code, in case the driver doesn't fill them all in. Many of the ioctl handlers in v4l2_ioctl do this already, but my patch does this at one common point and so all the memsets for each ioctl can be deleted. For VIDIOC_G_SLICED_VBI_CAP, which has one input field ('type') and other output-only fields, the input field is near the end of the structure instead of at the beginning. So there is still a memset in it's ioctl handler to zero out the beginning of the struct. There were a couple mistakes with the existing code: For VIDIOC_G_AUDIO the index field was preserved, but G_AUDIO is a read only ioctl so nothing is copied from userspace to preserve. For VIDIOC_G_FREQUENCY the tuner field was not preserved like it should have been. This would be a problem if there was any hardware with more than one tuner/modulator. For VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS, none of the fields were preserved even though each ioctl has several field that are supposed to be inputs to the driver! Obviously these ioctls don't get used much. The index field is needed if the driver has multiple discrete sizes/rates and other fields can be used too, e.g. if the size depends on pixel format or frame rate depends on image size for example. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10808): Fix typo in lnbp21.cIgor M. Liplianin
It was a typo in the function name, it should be lnbh24_attach, and not lnbp24_attach. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI cardIgor M. Liplianin
Add support for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10804): Add support for ST STV0900 dual demodulator.Igor M. Liplianin
Add last piece of code to support ST STV0900 dual demodulator. The IC consist of two dependent parts. It may use single or dual mode. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10803): Add core code for ST STV0900 dual demodulator.Igor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10802): Add more headers for ST STV0900 dual demodulator.Igor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10801): Add headers for ST STV0900 dual demodulator.Igor M. Liplianin
The IC consist of two dependent parts. It may use single or dual mode. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10800): Add support for ST LNBH24 LNB power controller.Igor M. Liplianin
The controller consist of two independent parts. Every part is similar to LNBP21, but has configurable i2c address. It is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10799): Add support for ST STV6110 silicon tuner.Igor M. Liplianin
The tuner is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> [mchehab@redhat.com: removed a wrong header: "cx23885.h"] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10798): Add CIMax(R) SP2 Common Interface code for NetUP Dual ↵Abylay Ospan
DVB-S2 CI card Add CIMax2 Common Interface code for NetUP Dual DVB-S2 CI card. SmarDTV CIMax(R) SP2 is Dual CableCARD, DVB Common Interface and OpenCable Hardware Controller. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10797): Add EEPROM code for NetUP Dual DVB-S2 CI card.Abylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10796): Add init code for NetUP Dual DVB-S2 CI cardAbylay Ospan
Add init code for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10794): v4l2: Move code to zero querybuf output struct to v4l2_ioctlTrent Piepho
For VIDIOC_QUERYBUF only the first two fields, size and type, are used as input. The rest can be filled in by the driver as output. Most drivers do not actually use all the field and unused ones should be zeroed out. Some drivers have code to do this and some drivers should but don't. So put some zero out code in v4l2_ioctl so that all drivers using that system get it. The drivers that have zeroing code get that code removed. Some drivers checked that the type field was valid, but v4l2_ioctl already does this so those checks can be removed as well. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10792): cx88: remove unnecessary forward declaration of cx88_coreTrent Piepho
A recent patch added a forward declaration of cx88_core right before the main definition of that structure, which is obviously unneeded. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10791): videodev: not possible to register NULL video_deviceTrent Piepho
video_register_device_index() checks if it was passed a NULL video_device pointer (which isn't allowed) _after_ it has already dereferenced it with video_get_drvdata(vdev). The checks are clearly pointless and can be removed, as the function would have crashed before reaching them if vdev ever was NULL. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10788): gspca - vc032x: Bad matrix for sensor mi1310_soc.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10787): gspca - mars: Bad webcam register values tied to saturation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10784): mxl5007t: update driver for MxL 5007T V4Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Asaf Fishov <afishov@maxlinear.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10783): mxl5007t: fix devname for hybrid_tuner_request_stateMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10782): mxl5007t: warn when unknown revisions are detectedMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10781): mxl5007t: mxl5007t_get_status should report if tuner is lockedMichael Krufky
report TUNER_STATUS_LOCKED if rf_locked or ref_locked Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10780): mxl5007t: remove function mxl5007t_check_rf_input_powerMichael Krufky
This function does not work properly and is not necessary - remove it for now. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10779): mxl5007t: remove analog tuning codeMichael Krufky
Analog doesn't work in this driver yet. This code just adds extra bloat, so remove it for now. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10772): siano: prevent duplicate variable declarationMichael Krufky
Fix the following build error: drivers/media/dvb/siano/smsusb.o: In function `get_order': include/asm-generic/page.h:10: multiple definition of `sms_dbg' drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here drivers/media/dvb/siano/smsdvb.o: In function `get_order': include/asm-generic/page.h:10: multiple definition of `sms_dbg' drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here Thanks to Mauro Carvalho Chehab for his original patch to address this issue. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10769): Update dependencies of the modules converted to V4L2Mauro Carvalho Chehab
Several modules were converted to V4L2 API. Update their dependencies on Kconfig. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10764): cx18: Disable AC3 controls as the firmware doesn't support AC3Andy Walls
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10763): cx18: Increment version number due to significant changes ↵Andy Walls
for v4l2_subdevs Driver is now at version 1.1.0. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10762): cx18: Get rid of unused variables related to video outputAndy Walls
Remove variables that were holdovers from ivtv for supporting the CX23415 MPEG decoder output. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10761): cx18: Change log lines for internal subdevs and fix ↵Andy Walls
tveeprom reads Give messages originating from internal subdevs a header using the subdev's name. Fixed an uninitialized variable problem with reading the EEPROM, noticed from log output. Got rid of the unused cx18_av_exit() function. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10760): cx18: Fix a memory leak of buffers used for sliced VBI ↵Andy Walls
insertion We leaked buffers every time a device was removed, if the user had enabled sliced VBI insertion into the MPEG stream. MythTV uses that. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10759): cx18: Convert GPIO connected functions to act as ↵Andy Walls
v4l2_subdevices Convert GPIO line functions, such a audio routing and device resets, to v4l2_subdevices. This essentially completes the conversion of cx18 to the v4l2_device/v4l2_subdevice framework. No regression testing has taken place as of yet. Also an ivtv legacy bug with GPIO mux routing and going to/from radio mode was commented, but not fixed. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10758): cx18: Convert I2C devices to v4l2_subdevicesAndy Walls
This is a major perturbation to cx18 I2C device handling to convert it to the v4l2_device/subdeivce framework. This change breaks GPIO audio multiplexer control for the time being. It will be fixed in a coming change. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10757): cx18, v4l2-chip-ident: Finish conversion of AV decoder core ↵Andy Walls
to v4l2_subdev Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast decoder core internal to the CX23418. Completed separation and encapsulation of the A/V decoder core interface as a v4l2_subdevice. The cx18 driver now compiles and links again. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10756): cx18: Slim down instance handling, build names from ↵Andy Walls
v4l2_device.name Convert card instance handling to a lighter weight mechanism like ivtv. Also convert name strings and debug messages to use v4l2_device.name. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10755): cx18: Convert the integrated A/V decoder core interface to ↵Andy Walls
a v4l2_subdev This is the next step in converting the cx18 driver to use the v4l2_device/ v4l2_subdevice framework. This is a straightforward conversion of the cx18_av_*[ch] files. It compiles, but leaves the driver in an unlinkable state at the moment. Note, the cx18 integrated A/V digitizer will now make a host match at address 1, as far as v4l2-dbg is concerned. That means it identifies itself as a separate "chip", and acts as an alias to the integrated A/V decoder registers that are also available with the host match at address 0. Signed-off-by: Andy Walls <awalls@radix.net> [mchehab@redhat.com: fix merge conflicts due to the removal of v4l2_ctrl_query_fill_std()] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10753): siano: convert EXPORT_SYMBOL to EXPORT_SYMBOL_GPLMichael Krufky
As pointed out by Mauro Chehab, we should always use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL wherever possible. A message was posted to the linux-media mailing list about this, checking with Uri Shkolnik of Siano Mobile Silicon if this is okay to convert. As per Uri's response to this email, it is OK for us to make this conversion. http://www.spinics.net/lists/linux-media/msg02200.html Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10752): sms1xxx: load smsdvb module automatically based on device idMichael Krufky
The smsdvb module was separated from the core and usb code. This change loads smsdvb automatically for driver configurations that depend on it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10751): sms1xxx: fix checkpatch.pl violations introduced by ↵Michael Krufky
previous changeset Fix checkpatch.pl violations introduced by previous changeset: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: sms_dbg were declared on 3 different files] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10750): import changes from SianoUri Shkolnik
Import the following changes from Uri Shkolnik * Two-ways merge with Siano internal repository * Continuing with DVB sub-system separation * kconfig and makefile updates * Code cleanup This is a work-in-progress sync with Siano's internal repository. Some changes had to be altered or dropped in order not to break the build. This breaks normal operation for the current driver, but it is being committed now for tracking purposes. These changes introduce the following checkpatch.pl violations: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); total: 7 errors, 23 warnings, 524 lines checked Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10749): sms1xxx: move smsusb_id_table into smsusb.cMichael Krufky
Move the usb_device_id table to the smsusb module in preparation for the sms1xxx module to be split into sub-modules. This will allow the smsusb driver to start up automatically upon insertion of the USB device. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10748): sms1xxx: restore smsusb_driver.name to smsusbUri Shkolnik
The sms1xxx driver will be broken down into smaller modules, so the original name, smsusb, is more appropriate. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10747): sms1xxx: move definition of struct smsdvb_client_t into ↵Michael Krufky
smsdvb.c Nobody uses struct smsdvb_client_t other than smsdvb.c -- this does not need to be inside smscoreapi.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10746): sms1xxx: enable rf switch on Hauppauge Tiger devicesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10744): dm1105: infrared remote code is remaked.Igor M. Liplianin
The driver infrared remote code part is altered to switch to a work queue. Also ir_codes table moved to ir-common module for shared access. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10743): dm1105: not demuxing from interrupt context.Igor M. Liplianin
The driver already has DMA buffer organized like ringbuffer, so it is easy to switch to a work queue. Length of ringbuffer can easily be increased, if someone need it. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10741): em28xx: Add Kaiser Baas Video to DVD maker supportDouglas Schilling Landgraf
Added usb vendor/product id for Kaiser Baas Video to DVD maker. Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10740): em28xx-cards: Add SIIG AVTuner-PVR boardDouglas Schilling Landgraf
Added SIIG AVTuner-PVR to the right entry. Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 03:53:01 +0000