aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-05-08Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) [netdrvr] atl1: fix build pasemi_mac: Use local-mac-address instead of mac-address if available pasemi_mac: PHY support pasemi_mac: Add msglevel support and "debug" module param pasemi_mac: Logic cleanup / rx performance improvements pasemi_mac: Minor cleanup / define fixes pasemi_mac: Add SKB reuse / copy-break pasemi_mac: Timer and interrupt fixes pasemi_mac: Abstract and fix up interrupt restart routines pasemi_mac: Move the IRQ mapping from the PCI layer to the driver tc35815: Remove unnecessary skb->dev assignment drivers/net/dm9000: Convert to generic boolean AT91RM9200 Ethernet: Fix multicast addressing AT91RM9200 Ethernet: Support additional PHYs PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code sky2: re-enable 88E8056 for most motherboards MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX ne: MIPS: Use platform_driver for ne on RBTX49XX ne: Add NEEDS_PORTLIST to control ISA auto-probe ne: Misc fixes for platform driver. ... Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to of_get_property()) manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Merge branch 'drm-patches' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: via: Make sure we flush write-combining using a follow-up read. via: Try to improve command-buffer chaining. drm: remove old taskqueue remnant drm: rename badly named define and cleanup ioctl code spacing radeon: Don't mess up page flipping when a file descriptor is closed. drm/radeon: upgrade to 1.27 - make PCI GART more flexible
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: move USB miscellaneous devices under drivers/input/misc Input: move USB mice under drivers/input/mouse Input: move USB gamepads under drivers/input/joystick Input: move USB touchscreens under drivers/input/touchscreen Input: move USB tablets under drivers/input/tablet Input: i8042 - fix AUX port detection with some chips Input: aaed2000_kbd - convert to use polldev library Input: drivers/usb/input - usb_buffer_free() cleanup Input: synaptics - don't complain about failed resets Input: pull input.h into uinpit.h Input: drivers/usb/input - fix sparse warnings (signedness) Input: evdev - fix some sparse warnings (signedness, shadowing) Input: drivers/joystick - fix various sparse warnings Input: force feedback - make sure effect is present before playing
2007-05-08Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08sm501fb printk warning fixesAndrew Morton
drivers/video/sm501fb.c: In function 'sm501fb_cursor': drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int' drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08xilinxfb: xilinx framebuffer device driverAndrei Konovalov
Add support for the video controller IP block included into Xilinx ML300 and ML403 reference designs. Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: fix of jumps in pm2fb_probeKrzysztof Helt
This patch fixes incorrect targets of jumps when an error occurs in the pm2fb_probe. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08skeletonfb: improvementsKrzysztof Helt
This patch adds a macro to register PCI ids table and corrects type of xxxfb_fix variable to avoid modpost warnings. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: removal of pm2fb_par fieldsKrzysztof Helt
This patch removes two redundant fields in the pm2fb_par structure. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08skeletonfb: more correctionsKrzysztof Helt
More corrections to skeletonfb.c file: - fixed types of more arguments - removed returned values in void functions - removed not existing fb_poll function - fixed closing comment typo - corrected misleading constant name ADDR Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vga16fb: actually support widths in multiples of 8Antonino A. Daplas
vga16fb does not just support 8-pixel wide rectangles, but rectangles with widths in multiples of 8. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vgacon: disallow console operations when in KD_GRAPHICS modeAntonino A. Daplas
Reported by James Pearson as: boot to run level 3 if not root, then make sure /dev/console is writeable login and type: setterm -blank 0 start X type into an xterm: while true; do echo "" > /dev/console; usleep 100000; done while the above loop is running switch to the text console and back again (Ctrl-Alt-F1 then Ctrl-Alt-F7) ... and the screen will be shifting (and wrapping) to the left. This problem stems from continuously writing text to the system console (which is in KD_TEXT mode) while the foreground console is in KD_GRAPHICS mode. Somewhere along the way, console printing got confused and omitted the KD_GRAPHICS/KD_TEXT test. Thus, vgacon attempted to scroll the screen of X, which causes X to shift. Fix by disallowing vgacon to touch the hardware when the vc is in KD_GRAPHICS mode. A definitive fix entails a full audit of the console code. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Use menuconfig objects II: video/logoJan Engelhardt
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: accelerated fillrect and copyareaKrzysztof Helt
This is a port of accelerated functions from 2.4 kernel. Only fillrect and copyarea are accelerated. Fillrect is not accelerated in 24-bit mode. [adaplas] Add appropriate flags Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: updatesOndrej Zajicek
Move s3fb_get_tilemax to svgalib.c as svga_get_tilemax, because it reports limitation of other code from svgalib (svga_settile, svga_tilecopy, ...) Limit font width to 8 pixels in 4 bpp mode. Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: memclock setting correctionsKrzysztof Helt
This patch disables a memory clock setting if a board has been initialized by BIOS. This allows using the memory clock set by manufacturer of the board. This patch also sets default clock for 3dlabs Permedia 2V reference board's clock to 75MHz (BIOS setting for EONtronic Permedia 2Vboard), because the default 83MHz can be too high. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: reset transparency settingskrzysztof.h1@wp.pl
This patch resets transparency settings when depth changes. Otherwise the 16 and 24-bit modes work incorrectly after switching from 32-bit mode. Signed-off-by: Krzysztof Helt < krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: check console-fb mapping in fbcon_get_requirementAntonino A. Daplas
- Check the console-to-fb mapping in fbcon_get_requirement(), otherwise the value returned may not be valid for the driver. - Minor cleanup Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: clean up exit patch of fb_set_varAntonino A. Daplas
Clean up exit patch of fb_set_var(): - consolidate all return values into a single local variable - ensure that return values are valid error codes - fix fb_set_var() returning success when fb_check_caps() failed Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08drivers/video/sis/: remove more kernel 2.4 codeAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08use mutex instead of semaphore in virtual console driverMatthias Kaehlcke
The virtual console driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08atyfb: halve XCLK with Mobility and 32bit memoryVille Syrjala
Laptops with Rage Mobility and 32bit memory interface seem to require halved XCLK to operate correctly. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08atyfb: reorganize clock initVille Syrjala
Reorganize atyfb clock init code so command line clock overrides are effective for all chips. The old code would silently ignore some of the command line clock overrides with some chips. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08atyfb: increase SPLL delayVille Syrjala
Wait 5 ms instead of 500 us for the SPLL to lock. This matches the recommendation in mach64 programmer's guide. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: fix return value of nvidiafb_open()Antonino A. Daplas
Fix return value of nvidiafb_open(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vga: vgastate fixOndrej Zajicek
1) sets 'palette access disabled' during read from AR10. This is usually documented as needed for access AR01-AR0F, but on ARK Logic card it is needed for AR10 (otherwise read returns some nonsence and save_vga_text() returns before do anything). 2) do not restore AR10, because it was not changed during 3) remove modification of misc reg: /* force graphics mode */ vga_w(state->vgabase, VGA_MIS_W, misc | 1); as comment is misleading - LSB of misc reg does not set/reset graphics mode, but set color/mono adresses of CRT and some other regs. but these regs are not used during save/restore fonts. (it worked even when (misc | 1) was replaced by (misc & ~1) ). Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: implement fb_get_capsAntonino A. Daplas
Implement fb_get_caps(). This will allow the driver to tell upper layer that it can only support 256 8x16 bitmaps when in tileblitting mode (var->bits_per_pixel == 0); Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: fbcon: check if mode can handle new screenAntonino A. Daplas
Check if the mode can properly display the screen. This will be needed by drivers where the capability is not constant with each mode. The function fb_set_var() will query fbcon the requirement, then it will query the driver (via a new hook fb_get_caps()) its capability. If the driver's capability cannot handle fbcon's requirement, then fb_set_var() will fail. For example, if a particular driver supports 2 modes where: mode1 = can only display 8x16 bitmaps mode2 = can display any bitmap then if current mode = mode2 and current font = 12x22 fbset <mode1> /* mode1 cannot handle 12x22 */ fbset will fail Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: prevent triggering of softlockupDave Jones
If the chip locks up, we get into a long polling loop, where the softlockup detector kicks in. See https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=151878 for an example. [adaplas] Chip lockup can occur at 3 points (flush, sync, and wait). Consolidate and allow the driver to go to safe mode cleanly. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: pixclock setting restrictionKrzysztof Helt
This patch adds restrictions to calculations of m, n and p factors which sets the pixclock for the Permedia 2V. I found during tests that synchronization is unstable if m (divisor) is bigger than half of the n (numerator). The patch disallows such settings combination. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: Permedia 2V memory clock settingKrzysztof Helt
Permedia 2V uses its own registers to set a memory clock. The patch adds these registers and uses them in the set_memclock() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: 3dlabs Permedia 2V reference board addedKrzysztof Helt
This patch adds support for 3dlabs Permedia reference board. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb/rivafb: switch to pci_get refcountingAlan Cox
Switch to pci_get refcounting APIs [adaplas] Fix a long-standing bug where the return value of pci_find_slot()/pci_get_bus_and_slot() is ignored. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vmlfb: framebuffer driver for Intel Vermilion RangeAlan Hourihane
Add the Intel Vermilion Range framebuffer support. Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: driver fixesOndrej Zajicek
This fixes broken fbcon on Virge VX in 24 bpp mode, and contains several other small updates. Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: save the activate field before calling fb_check_var()Antonino A. Daplas
Some drivers may reset the var->activate field on fb_check_var(). This can lead to undefined behavior. For example, doing fbset -a <option> with vga16fb will only modify the active console instead of modifying all. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: check if the character count can be handledAntonino A. Daplas
Fontmaps can be 256 or 512 in length. The only driver that can do tileblitting can only handle 256 characters. Check for this when setting the font. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: implement fb_get_tilemax()Antonino A. Daplas
Implement fb_get_tilemax(). It just returns 256. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: limit 8x16 rectangles when tileblitting is enabledAntonino A. Daplas
If tileblitting is enabled (text mode), the hardware can only accept 8x16 bitmaps. Advertise this to the upper layer. And to ensure that an appropriate font is always available, select an 8x16 font in Kconfig. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vga16fb: restrict to blit rectangles with widths of multiples of 8 pixelsAntonino A. Daplas
Advertise that vga16fb can only handle widths that are 8-pixel-multiple only (software limitation). To ensure that a legal font is available, SELECT an 8x16 font in Kconfig. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: font setting should check limitation of driverAntonino A. Daplas
fbcon_set_font() will now check if the new font dimensions can be drawn by the driver (by checking pixmap.blit_x and blit_y). Similarly, add 2 new parameters to get_default_font(), font_w and font_h, to further aid in the font selection process. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: advertise limitation of drawing engineAntonino A. Daplas
A few drivers are not capable of blitting rectangles of any dimension. vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting mode) can only blit 8x16 rectangles. For example, loading a 12x22 font in vga16fb will result in a corrupt display. Advertise this limitation/capability in info->pixmap.blit_x and blit_y. These fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then width/height of 7+1 is supported. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: consolidate common drawing functions into a header fileAntonino A. Daplas
Consolidate common drawing functions into a single header file. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vfb: use fb_sys_read() and fb_sys_write()Antonino A. Daplas
Since vfb's framebuffer is vmalloc'ed, use the fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08hecubafb: use fb_sys_read()Antonino A. Daplas
Since hecubafb's framebuffer is vmalloc'ed, use fb_sys_read(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08arcfb: use fb_sys_read()Antonino A. Daplas
Since arcfb's framebuffer is vmalloc'ed, use the fb_sys_read(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add fb_read/fb_write functions for framebuffers in system RAMAntonino A. Daplas
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using __raw_read/__raw_write (fb_readl/fb_writel) for these drivers is illegal, especially in other platforms. Create file read and write methods for these types of drivers. These are named fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: pass struct fb_info to fb_read and fb_writeAntonino A. Daplas
It is unnecessary to pass struct file to fb_read() and fb_write() in struct fb_ops. For consistency with the other methods, pass struct fb_info instead. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vfb: use sys instead of cfb drawing functionsAntonino A. Daplas
Since vfb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08hecubafb: use sys instead of cfb drawing functionsAntonino A. Daplas
Since hecubafb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:57:39 +0000